Post on 02-Feb-2021
VIBRATING POST DRIVERS- SKID STEERS
- MINI / SMALL EXCAVATORS……………………………………………………..
(4 Tools-in-1) Quick Transform Attachments
POST DRIVER
……………………….
CONCRETE BREAKER (Optional)
HYDRAULIC PLATE TAMPER (Optional)
GROUND ROD DRIVER (Optional)
One Vibratory Driver Model - Performs Multiple Diverse Tasks:
May, 2019
Authorized Texas Dealer
I Dig Texas LLC4021 US Hwy 281 SouthMarble Falls, Texas 78654
512.649.6040
tom@idigtexas.com
mailto:tom@idigtexas.commailto:tom@idigtexas.com
Model 120-SSVibrating Post Driver / Skid Steers
“Safe” – Easy to Operate, Uses “Non-Violent” Vibration
No Dangerous Cycling Hammer
Vibration does not Transfer to Machine
1 - Post Driver - Wood / Steel Posts (Sched 40) / I Beams / T Posts etc - 2” to 6” (+)
……………………………..
2 – Concrete Breaker … Quick Attach (Optional)
3 - Hydraulic Plate Tamper … Quick Attach (Optional)
4 - Ground Rod Driver … Quick Attach (Optional) > see page 4
We Custom Build for Hydraulic Flow Rates from 11 gpm up to 35 gpm
Post Lengths up to 11 ½ ‘ (ish)
Low Maintenance – 2 Grease Points
Light Weight – only 500lbs
On Multi-Unit Orders: Will Powder Coat to your Colors when possible
* Please Note – The Concrete Breaker and Hydraulic Plate Tamper are not intended to replace much more expensive purpose built tools, these units are designed for lighter duty smaller jobs ie; breaking up and/or tamping garage pads, sidewalk sections etc.
Model 120-LS (Left Shift)Vibrating Post Driver / Skid Steers
Vibrator is Mounted to the Extreme Left Side ………… Some Clients prefer this Design
“Safe” – Easy to Operate, Uses “Non-Violent” Vibration
No Dangerous Cycling Hammer
Vibration does not Transfer to Machine
Wood / Steel Posts (Sched 40) / I Beams / T Posts etc - 2” to 6” (+)
We Custom Build for Hydraulic Flow Rates from 11 gpm up to 35 gpm
Post Lengths up to 11 ½ ‘ (ish)
Low Maintenance – 2 Grease Points
Weight – only 700lbs
On Multi-Unit Orders: Will Powder Coat to your Colors when possible
Model 120-MXVibrating Post Driver / Small Excavators
“Safe” – Easy to Operate, Uses “Non-Violent” Vibration
No Dangerous Cycling Hammer
Vibration does not Transfer to Machine
1 – Post Driver - Wood / Steel Posts (Sched 40) / I Beams / T Posts etc - 2” to 6” (+)
……………………………
2 - Concrete Breaker … Quick Attach (Optional)
3 - Hydraulic Plate Tamper … Quick Attach (Optional)
4 - Ground Rod Driver … Quick Attach (Optional) > see page 4
We Custom Build for Hydraulic Flow Rates from 11 gpm and up to 35 gpm
Low Maintenance – 2 Grease Points
Light Weight – only 500lbs – Can be Reduced to 350 lbs. for “Mini” Excavators”
On Multi-Unit Orders: Will Powder Coat to your Colors when possible
Will Adapt to any type of Mini / Small Excavator “Adapter Bracket / Ears”
* Please Note – The Concrete Breaker and Hydraulic Plate Tamper are not intended to replace much more expensive purpose built tools, these units are designed for lighter duty smaller jobs ie; breaking up and/or tamping garage pads, sidewalk sections etc.
Low-Profile Ground Rod Drivers
…. Designed for the Utilities Industry Clients
Enhanced view of Attachments
Post Driver / (Post Caps come in Several Sizes)
Concrete Breaker
Hydraulic Plate Tamper
Ground Rod Driver
………………………………….
Durable – High Quality
Takes Approximately 5 Minutes to Change from 1 Tool Attachment to Another
All units are “Powder Coated”
* Please Note – The Concrete Breaker and Hydraulic Plate Tamper are not intended to replace much more expensive purpose built tools, these units are designed for lighter duty smaller jobs ie; breaking up and/or tamping garage pads, sidewalk sections etc.
240 SerieS PoSt DriverS ……..
“Safe” – Easy to Operate, Uses “Non-Violent” Vibration
No Dangerous Cycling Hammer
Vibration does not Transfer to Machine
Perfect for Steel Posts / I Beams / T Posts etc - 2” to 6” (+)
Works great for Smaller Diameter Wood - 2” to 5” (+)
Post Lengths to 18 feet (+)
Requires Hydraulics and Electrical Connects
Low Maintenance – 2 Grease Points
Weight – 1400lbs
3 Models - “Forward” / “Center Left” / “Full Left Shift”
On Multi-Unit Orders: Will Powder Coat to your Colors when possible
Vibe Drive Units Hard at Work
Authorized dealer … I dig Texas LLC ..!
Vibe Drive Technologies Inc. is proud to be working with I Dig Texas LLC to serve the folks in Texas.
We have and will continue to strive to build “Quality” Vibratory Post Drivers. More recently, we are now focusing our energies on designing some of our models to be “Multi-Functional”.
As a part of our product offering; We now offer our clients rugged and durable “niche” (4 tools-in-1) that may fit nicely into your business model thus increasing your potential return on investment moving forward. Purchase 1 Vibratory Post Driver Model ………. Have the Ability to Perform Multiple and Diverse Jobs !!
✓ Post Driver – Steel or Wood, I Beams / T Posts etc
✓ …………………….
✓ Concrete Breaker .. Quick Attach (Optional)
✓ Hydraulic Plate Tamper .. Quick Attach (Optional)
✓ Ground Rod Driver .. Quick Attach (Optional)
Our Units are;
✓ Safe to Operate (uses Vibration only)
✓ Easy for the General Public to understand and use
✓ Low Maintenance / Built Intentionally Rugged
✓ Versatile
*Please Note – The Concrete Breaker and Hydraulic Plate Tamper are not designed or even intended to replace much more expensive purpose built tools. These units are designed (and priced) for lighter duty smaller jobs ie; breaking up and/or tamping garage pads, sidewalk sections etc.
For More Information, Please Contact Tom at I Dig Texas LLC at Your Convenience ………….
Cell: 512.649.6040 / tom@idigtexas.com
mailto:tom@idigtexas.com