Vehtec Catalogue v5

Post on 23-Jul-2016

258 views 1 download

description

Product Catalouge from Vehtec Eldi

Transcript of Vehtec Catalogue v5

the green choice

PRODUCT CATALOGUE 2015/2016

Vehtec develops energy efficient systems, aiming

for the highest possible capacity with the least amount of power

consumption, providing sustainable solutions for markets

today and tomorrow.

VEHTEC AB | Kråketorpsgatan 10B | SE-431 53 Mölndal, Sweden Phone: +46(0)31-787 89 00 | Fax: +46(0)31-787 89 09 info@vehtec.se | www.vehtec.se

ELDI Produkter AB | Selaövägen 1 | SE-124 59 Bandhagen, SwedenPhone: +46(0)8-749 21 77 | www.eldi.se

Phot

o: F

redr

ik F

orsb

erg

ClimateHeating SystemsC200 ...............................................................................................................................................................17VeHeat .............................................................................................................................................................8VeCharger ..................................................................................................................................................14Heating System Kit including VeForce ...........................................................................10

Recirculation blowersBreasy .............................................................................................................................................................12CargoHeat .................................................................................................................................................16Compact Climate ...............................................................................................................................15Eldi Preheater ............................................................................................................................................4Vehtec FleetHeat.....................................................................................................................................6

eleCtroniCsAmplifiersPA1 ...................................................................................................................................................................18

Backhorns .................................................................................................................................................27

Climate Control unitsVCC ................................................................................................................................................................21Hearing aid systemsHA1 .................................................................................................................................................................19

LightingLED interior/exterior spot lights ..........................................................................................22LED interior lighting ......................................................................................................................24LED step lighting ...............................................................................................................................24Multifunctional lightings .............................................................................................................26Corridor lightings ...............................................................................................................................25Working lamp ........................................................................................................................................26

LoudspeakersOutdoor Horn speaker series ...................................................................................................20

School Sign Flasher Relay ..........................................................................................................27

ComponentsBus Signs .....................................................................................................................................................28Buttons ........................................................................................................................................................27Digital clocks ..........................................................................................................................................28

HoseHose connections/reducers ........................................................................................................31Standard EPDM hose .....................................................................................................................31VeHose ..........................................................................................................................................................31

Pumps/ValvesConnectors ................................................................................................................................................30Spring Band Clamps ........................................................................................................................30Pumps ............................................................................................................................................................30Valves ..............................................................................................................................................................29

School Bus Signs .................................................................................................................................28

3

4

ELDi PrEHEAtErS COMPACT

RELIABLE

EASY TO INSTALL & MAINTAIN

FASTER HEATING

INCL CONNECTING CABLE

never down, never ColdPreheater for diesel engines and electric/hybrid vehicles that increases the comfort for drivers and passengers through a reliable operation system, can be activated by a remote control GPS system for the highest energy-efficient heating possible.

4

climate

5

art no: 91981 9149491 91761 9130301 912320101 912330301*Heat Capacity: 9800W 9800W 7600W 6000W 3000W 6000WSwitchable to: (4900W) Voltage: 400V 3 N 400V 3 N 400V 3 N 400V 3 N 230V 1-fas 230V 3-fas Power consumption: 15A 15/7,5A 11A 10/5A 14/10A 15ALength (mm): 550 550 550 450 350 450Width (mm): 190 190 190 190 190 190Height (mm): 190 190 190 190 190 190Weight (kg): 12,5 12,5 12,5 10,5 9 10,5

teChniCal data

* Norway 6000W (3000W) 230V 3-fas.

simple and fast installationThe PreHeater is supplied with complete connection cables in desired lengths and with quick connection to the heater. The water is simply connected in series with the bus heating system with hose fittings according to your measurements. We also have hoses and hose clamps (see page 18–19).

CertifiCationsApproved according to SNDFi as well as CE-marking.

CompaCt sizePreheater is built compact and is easy to place in a bus. For example in a prepared area or under a seat.

environmentally friendlyDoes not release any harmful exhaust gases. Heats up both the motor and cabin with help from the silent internal circulation pump in the heater thus avoiding cold starts.

10–20 pers3000W230V 1-fas

20–40 pers6000W (3000W)400V 3-fas

40–60 pers7600W400V 3-fas

the seCure and Complete heating system

60 persons or more9800W400V 3-fasalternative:9800W (4900W)400V 3-fas

6

VEHtEC FLEEtHEAt

eldi preheater

6 7

traditional ramp heating

climate

desCriptionModern, green, and cost effective preheating for a flexible Public transport. Vehtec FleetHeat is a software that connects vehicles and heaters via GPrS.

Vehtec FleetHeat reduces the costs of preheating, reduces energy consumption, reduces maintenance costs of ramp heating, and facilitates traffic planning.

Based on, for example, the bus schedule and/or the temperature of the driver’s area, FleetHeat controls the Eldi Preheaters and fan blowers via GPrS, ensuring the right temperature at the right time.

Vehtec FleetHeat is a flexible control system that efficiently charges batteries and preheats your bus fleet with a low environmental impact.

8

VEHEAt THE MoST CoMFoRTABLE HEATINg

oN THE MARKET ToDAy

desCriptionVeHeat is the most innovative system in bus climate for years. The patented VeHeat system combines two technologies in one product, radiation heating and convection heating – for the most comfortable heating on the market today.

appliCationVeaHeat covers both 1-pipe and 2-pipe demands in one product, and can be equipped for a variety of applications.

VeHeat ensures a faster and even more heat distribution throughout the compartment, for the same level of comfort all around the interior, keeping fuel consumption low and energy efficiency high.

VeHeat is manufactured in sustainable materials, easy to produce, install, maintain and recycle.VeHeat heater body in recycable aluminum will keep its capacity throughout its entire lifetime, and can be eloxated in a variety of colours.

VeHeat is tested for pressure up to 10 bars.

Length: Can be supplied in all lenghts up to 10 metres Height: 140 mmWeight: < 3 kg/mWidt with fins from wall: 53 mmHeating effect Q100: 1220 W/meter

teChniCal data

left side components right side componentsstandard components

With airbleeder left

VHECP Endcover Plastic

VHSSealing

VHBBracket

VHFSFixing screws

VH1 1-pipe connection

VH2 2-pipe connection

VHR Return connection

With airbleeder right

VHECP Endcover Plastic

VHECPCHose cover

VH1 al

VH2 al

VHR alVHECPCHose cover

VH1 ar

VH2 ar

VHR ar

8 9

THE MoST CoMFoRTABLE HEATINg

oN THE MARKET ToDAy

The green choice With the characteristic features of the VeHeat, we have developed a modern system that:• ensures a faster and more even heat distribution• keeps fuel consumption low and energy efficiency high• is easy to manufacture, install and maintain• is manufactured in a sustainable material• is easy to recycle

vhC 1000 22 (VeHeat Convector + 1000 mm + 2-pipe Left + 2-pipe Right)

(mm)

climate

Breasy (7kW)

VeHeat Convector

VeHose

Aluminum Convector Brackets

VeForceForced convection heating

Clamps and Connectors3-way Valve

HOT WATER INLET

COLD WATER RETURN

Pump

Plastic Endcovers

HVAC Controller

ELDI PreHeater

10

HEAtiNG SyStEM Kit

Breasy (7kW)

VeHeat Convector

VeHose

Aluminum Convector Brackets

VeForceForced convection heating

Clamps and Connectors3-way Valve

HOT WATER INLET

COLD WATER RETURN

Pump

Plastic Endcovers

HVAC Controller

ELDI PreHeater

10 11

climate

desCriptionExample of a complete Kit heating system for MB Sprinter see picture. Designed for good heating comfort. Complete heating system ready for installation, all parts included. Easy to order, 1 part number includes complete kit.

Climate controle included to give the best comfort at all times. Lenghts of convectors can be changed to your demands. Contact us and we will design your unique Kit for your Vehicle.

12

BrEASy A SERIES oF HEATERS IN VARIouS SIzES,

EASy To INSTALL

desCriptionBreasy is a series of heaters that come in various sizes to easily be installed in vehicles such as buses, boats and construction equipment.

appliCationBreasy comes in three different designs, all available in 12V and 24V applications.The standard application is equipped with a close meshed net for dust collection on the suction side.

The recuperator is manufactured in a new construction, brazed with a lead-free solder thus meeting our high standards when it comes to environmental safety.

The heater is made of aluminium and very solid. Breasy is constructed for self-deaeration – which facilitates installation whereas deaeration no longer is needed. The first three digits refer to the capacity, the last two refer to connection diameter.

Applications comes with water connection pipes in 16, 19 and 22 mm diameter.

Power consumption: 12V=9A / 24V=4,5AAll applications available in 12V and 24V. The first three digits refer to the capacity and voltage, the last two refer to connection diameter.

Breasy 3 kw Breasy 7 kw Breasy 12 kwAir vol. 250 m3/h Air vol. 350 m3/h Air vol. >350 m3/hart no: art no: art no:Br312/16 Br712/16 Br1212/16 Br312/19 Br712/19 Br1212/19Br312/22 Br712/22 Br1212/22Br324/16 Br724/16 Br1224/16Br324/19 Br724/19 Br1224/19Br324/22 Br724/22 Br2412/22

accessoriesElectret dust filter

teChniCal data

12 13

Br 712/19 mm (Breasy 7.5kW + 12V + 19 mm) (mm)

climate

14

veCharger 3art no: vCh2430230Voltage/Ampere: 24V/30A Input VAC: 220 – 240Protection class: IP21Bat. capacity (Ah): 80 – 300Width (mm): 220Length (mm): 112Height (mm): 73Weight (kg): 1,7Efficiency: >88%

teChniCal data

veCharger 2art no: vCh2412230 / vCh2420230Voltage/Ampere: 24V/12A 24V/20A Input VAC: 220–240Protection class: IP65Bat. capacity (Ah): 20–200 100–400Width (mm): 90 98Length (mm): 193Height (mm): 47Weight (kg): 1,7Efficiency: >90 91%

veCharger 1art no: vCh1217230Voltage/Ampere: 12V/17A Input VAC: 220–240Protection class: IP65Bat. capacity (Ah): 20–250Width (mm): 90Length (mm): 193Height (mm): 47Weight (kg): 1,7Efficiency: >88%

VECHArGEr BATTERy CHARgER FoR ALL KINDS oF BATTERIES

desCriptionCharge your battery and ensure sufficient durability with VeCharger.

Compact and water resistant battery charger for all kinds of batteries.

With VeCharger you can charge any kind of battery according to the right specifications, taking temperature, parallel loads, size etc into account.

All electronics have been molded into the unit, hence making it both waterproof and shock resistant.

14 15

climate

COMPACtCLiMAtE

Dimensions: LxWxH 418x150x85 mmVoltage: 12 VDCEffect: 7,5 kW

art no:CC1219l 12V, 19 mm, LeftCC1219r 12V, 19 mm, Right

teChniCal data

a reliaBle and effiCient heating solutionA new series of heaters from Vehtec. We have created a reliable and efficient heating solution, based on a well known technology. Axial fans and heater changers incorporated in a strong metal case, combined with slim measures and a high performance.

85 m

m

150

mm

418 mm379 mm

air in

air out

left

The picture shows the Compact Climate with pipes on the left side. Also available with pipes on the right side.

16

CArGOHEAt

Dimensions: LxWxH 350x435x180 mmVoltage: 24V / 8AEffect: 14 kWAir Flow: 750 m3/h

art no:Cr1219 12V, 19 mm connectionCr1222 12V, 22 mm connectionCr2419 24V, 19 mm connectionCr2422 24V, 22 mm connection

teChniCal data

HEATINg FoR

VEHICLES

heating for distriBution vehiClesA heater for distribution and service vehicles. The unit is equipped with a high capacity double radial blower and a strong heat exchanger. it is well adapted for vehicles with volumes up to 40 – 45m3.

(mm)

16 17

climate

C200 STANDARD HEATINg SySTEM

desCriptionThe Vehtec convectors C200 is a robust constructions with aluminium lamellas in a patented installment system that makes it completely silent at temperature changes in comparison to other similar systems on the market.

appliCationThe cast-solid anodised aluminium cover gives it an elegant look and has a durable, easy-to-clean, surface.

The simple suspension system make install-ment in vehicles very rational.

The C200 convector is a 2-pipe convector with 22 mm pipes. Convector covers normally come in 100 mm surplus length to pipe length.

Heating effect Q100: 1119 W / meterDimensions: 150x70x2500Production lengths: Standard 5000 mm, 2500 mm Customized on demand

accessoriesart no:500061 End cap, 2 extract, black500062 Brackets 22 mm500063 Internal mounting brackets clip

teChniCal data

5000 mmø

22

mm

165,

5 m

m

77,5 mm

18

PA1 CENTRAL AuDIo uNIT

desCriptionAudio control and amplifier PA1 work as a central unit for public transportation vehicles with 24V requirements. PA1 sound quality is very high, to make public announcements through speakers and micro-phones as clear and audible as possible. PA1 is among the most popular central audio units on the market.

appliCationPA1 controls all sound units in a vehicle, and functions as an amplifier. Four different sources can be connected at the same time: radio/cd, driver microphone, guide microphone, and video.

PA1 has an alert signal that can be connected or discon-nected to the inputs desired. Controls the receiving signals, ranks them in priority and works as an amplifier to the loudspeakers. Can be adapted to different radio capacities.

PA1 can easily be connected to the hearing aid amplifier HA1, a unit especially adapted for hearing aids in public transportation vehicles.

Dimensions: 140x160x50 mmVoltage: 24VPower consumption: 30WResistance: 4–8 Ω Supply voltage: 20–35VMax current consumption: 3 + 5AMax current 12V output: 2,5 (5) A(supply + backup)Quiscent current at backup: Max 0,008Aoutput power: 30W at 4–8 ohm load and 28V supplyInput sensitivity: Microphone 1 mV, Line 100 mV, Speaker input 2VaccessoriesContact pieces and pins available

teChniCal data

art no: 430015

accessoriesart no:430020 Contact piece430066 Pins

18 19

HA1 HEARINg AID AMPLIFIER FoR SIgNAL TRANSMISSIoN

To HEARINg AIDS

desCriptionHA1 Hearing Aid amplifier drives a loop for signal transmission to hearing aids. Due to the electrically balanced inputs, one microphone input and one signal input, connection to different systems in the vehicle is easy and noise is minimized. HA1 can be used stand-alone or together with PA1 amplifier.

appliCationSound inputs pass through an automatic gain control. HA1 has one potentiometer to set the signal level to the loop. The loop is a cable that surrounds the area where the sound shall be received, in a vehicle the loop is normally rectangular.

When HA1 is used stand-alone, microphone and/or another sound source is connected as required. When HA1 is connected to the PA1, the signal is received from the loudspeaker output on the PA1 amplifier and connected to the line/speaker input. Contact pieces and pins available.

Supply voltage: 12–30 Voutput: Adjustable up to 2A peak current

Loop resistance: Max 0.5 Ω at 12V supply and max output current, max 1 Ω at 24V supply and max output current.

Size: 140x160x50 mm.PCB connector: 22-pin AMP junior timer type 1-828 801-7Mating cable connector: AMP 929504-7Microphone input: 0,5 mV sensitivity, integrated supply for electret microphones.Control input microphone: 1 ground closing, the microphone is prioritised over the input.Line/Speaker input: 500 mV – 5V sensitivityControl inputs line: 4 ground closing and 1 positive input that each activates the input accessoriesContact pieces and pins available

teChniCal data

art no: 430045

accessoriesart no:430065 Contact piece430066 Pins

electronics

20

art no: uhhps6

Loudspeakers ToP oF THE LINE PERFoRMANCE

desCriptionUH speaker series are high class loudspeakers for every purpose and demand.

top of the line performance and carefully selected materials.Excellent for PA and alarm systems on buses, ferries, railways, airports and industrial installations.

appliCationHorn loudspeakers to be installed in all manners of harsh environments, both internal and external for public address and intercom uses.

Their frequency range and high sensitivity, combined with high corrosion resistance and pleasing design make the products satnd out in terms of quality and performance.

art no: uha45Material/Colour: PA6 and aluminium / RAL 7035Weight: 0,4 kgIP Rating: 67Max./min.amb.temp: 140°C / -40°CRated/max power: 6W / 10WSPL 1W/1m: 101 dbSPL Rated Power: 107 dbEffective freq. Range: 300–20000 Hz

art no: uhh44Material/Colour: PA6 and aluminium / RAL 7035Weight: 0,59 kgIP Rating: 67 in e–chamberMax./min.amb.temp: 150°C / -50°CRated/max power: 6W / 10WSPL 1W/1m: 101 dbSPL Rated Power: 107 dbEffective freq. Range: 300–20000 HzDispersion (-6dB) 1kHz / 4kHz: 150° / 45°

art no: uhhps6Material/Colour: Polyamide uL94 V0 / RAL 7035Weight: 0,35 kgIP Rating: 67Max./min.amb.temp: 110°C / -40 °CRated/max power: 6W / 15 WSPL 1W/1m: 100 dbSPL Rated Power: 107 dbEffective freq. Range: 300–20000 HzDispersion (-6dB) 1kHz / 4kHz: 170° / 70°

teChniCal data

art no: uhh44

art no: uha45

art no: uhh44

art no: uha45

art no: uhhps6

20 21

Technical informationtemperature range: –50 to +99°C Display: 2 digits (°C/°F) resolution: 1°C Accuracy: ± 1°C NtC probe NtC probePanel cut-out dimensions: 25,4 x 58 mmFront dimensions: 32 x 66 mmDepth: 51 mm

ProgrammingSelect temperature: press SEt for 5sSelect Cold/Heat regulation: press Up/Down for 10s, move down to P0 and press SEt, select 0=Cold and 1=Heat, press SEt, move down to EP and press SEt.

*A small LED light shows when relay is activated.

Climate Control art no: vCC121 1,5 m probeart no: vCC121s 6 m probe

Technical informationtemperature range: –50.0 to +99.9°CDisplay: 3 digits (°C/°F)resolution: 0.1°CAccuracy: ± 1°C NtC probePanel cut-out dimensions: 29 x 71 mmFront dimensions: 38 x 79 mmDepth: 61 mm

ProgrammingSelect temperature: press SEt for 5s, select temperature and press SEt.Select Cold/Heat regulation: press Up/Down for 10s, move down to P0 and press SEt, select 0=Cold and 1=Heat, press SEt, move down to EP and press SEt. *A small LED light shows when relay is activated.

Climate Controlart no: vCC12241 1,5 m probeart no: vCC12241s 6 m probe

Technical informationSet temperature range: +18 to +24°CDisplay: 3 digits (°C/°F)resolution: 0.5°CAccuracy: ± 0.5°CVoltage range: 10-30Vtemperature sensor Panel cut-out dimensions: 29 x 71.5 mmFront dimensions: 38.5 x 80 mmDepth: 63 mmOutput: 7 x 700 mA

Climate Control for aC and heating

features a/C: If the indoor temp is higher than the Set temp air conditioner operates in the cooling function. In cooling period condenser immediately operates but compressor operates after 20 seconds. While leaving the cooling period, compressor stops operating immediately, but condenser stops after 20 seconds. If the indoor temp is less than the Set temp, air condition operates in the heating function. With the adjusted value the air conditioners tolerance is +-1.5 for starting and leaving operating for both heating and cooling

heating: oN-oFF button

interior temperature: Can be monitored for 3 seconds after pressing the button.

fan speed: When fan button is pressed, speed step of the fan is increased. The fan speed is changed as 1-2-3-1-2 if the fan button is pressed and the air conditioner is operating, if the air conditioner is not operating changed as 1-2-3-0-1-2. In the 1. speed the top led illuminates in the 2. speed the top and middle leds illuminates in the 3. speed all 3, top middle and bottom leds illuminates.

up arrow: The set temperature can be increased by 0.5°C. The max. set temperature is 24°Cdown arrow: The set temperature can be decreased by 0.5°C. The min. set temperature is 18°C.

art no: vCC1224 savKvf

electronics

22

art no: 640042 touch and 640043 Power LED interior & exterior spot lamps.• Voltage Range (10V–30V)• Current (12V=260mA / 24V=130mA)• Chrome plated metal body• 4 pcs metal clips• 6 x 0,5W LEDs = 3W• Life time 30.000 hours• Weight: 165 gr• Waterproof (IP67)

art no: 640021Power LED interior & exterior spot lamps.• Voltage Range (10V–30V)• Current (12V=100mA / 24V=50mA)• Chrome plated metal body• 2 pcs metal clips• 1W LED• Life time 30.000 hours• Weight: 55 gr• Waterproof (IP67)

art no: 640021

art no: 640025Power LED interior spot lamps.• Voltage Range (10V–30V)• Current (12V=260mA / 24V=130mA)• Anodizing plated aluminium body• 2 pcs metal spring• 3 x 1W LEDs = 3W• Life time 30.000 hours• Weight: 165 gr

art no: 640020Power LED interior spot lamps.• Voltage Range (SMPS 10V–30V)• Current (12V=100mA / 24V=50mA)• Anodizing plated aluminium body• 2 pcs metal spring• 1W LED• Life time 30.000 hours• Weight: 55 gr

power led interior & exterior lamps

power led interior spot lamps

art no: 640043art no: 640042 Touch

art no: 640020

art no: 640025

22 23

art no: 6400011, 6400012LED interior spot lamps.• 12V or 24V• ABS frame / Polycarbonate lens• Recessed mounting• 18 LEDs and 24 LEDs• Different LED colors available• Life time 30.000 hours

art no: 640040 touch and 640041LED interior lightings.• 12V or 24V• Current (12V=170mA / 24V=85mA)• ABS frame / Polycarbonate lens• Surface mounting• Slim design h=10 mm• 30 LEDs and 34 LEDs (34 leds with touch button)• Different LED colors available• Life time 30.000 hours

led interior lightings and spot lamps

led interior spot lampsart no: 640251, 24v 640241, 12v whiteLED interior spot lamps.• 12V or 24V• ABS frame / Polycarbonate lens• Recessed mounting• 18 LEDs and 24 LEDs• Different LED colours available• Life time 30.000 hours

art no: 640041art no: 640040 Touchart no: 640039 red touch

art no: 6400011

art no: 640252

art no: 640251

art no: 6400012

electronics

24

LED interior Lightings.• 12V or 24V• Aluminium Profile / Polycarbonate lens• Surface type mounting• Optional night light• 266 mm: 640063• 400 mm: 640065

art no: 640067 24v, 640028 12vLED interior Lightings.• Voltage Range (SMPS 10V – 30V)• Aluminium Profile / Polycarbonate lens• Surface type mounting• Optional night light

Lighting products are approved for inflammability regarding, directive 95/28/EEC

SLIM DESIGN

led interior lightings

led interior lightings

art no: 640002, 640003, 640004, 640006LED step lightings• 12V or 24V• Aluminium Profile / Polycarbonate lens• Surface type mounting• Different LED colours available• Available in different angles• Standard length is 1080 mm

Lighting products are approved for inflammability regarding, directive 95/28/EEC

Lighting products are approved for inflammability regarding, directive 95/28/EEC

art no: 640063 266 mm640065 400 mm640065K Button640069 500 mm640069K 500 mm Button 12V DC640070 730 mm640070K 730 mm Button 12V DC640071 960 mm

art no: 640080

art no: 640068 12V

art no: 640002 Red

art no: 640004 Blue

art no: 640003 yellow

art no: 640006 White

led step lightings

2524

art no: 640310, 640311, 640312, 640313Short type Corridor & step LED lighting.• 12V or 24V• ABS Adapter / Polycarbonate lens• Recessed & Surface mounting• 3 & 6 LEDs• Different LED colours available

art no: 640314, 640315, 640316Long type Corridor LED lighting & 3rd stop.• 12V or 24V• ABS Adapter / Polycarbonate lens• Recessed & Surface mounting• 12 & 20 LEDs (20 leds, 3rd stop)• Different LED colours available

short type Corridor & step lighting

long type Corridor led lighting and 3rd stop

Protective Adapterart no: 640312

Surface Mounting Adapterart no: 640313

art no:640310 12V White640311 24V White640320 12V Blue

art no: 640314 3rd Stop

art no: 640315

Surface Mounting Adapterart no: 640316

electronics

26

ULTRA SLIM

DESIGN

Rear Position

Front Position

Side marker

Step lighting

art no: 640051, 640052, 640053, 640054Multi functional LED lightings.• 12V or 24V• Current (12V=170mA / 24V=85mA)• ABS frame / Polycarbonate lens• Surface mounting• Ultra slim design h=7,5 mm• 6 LEDs• Different LED colours available

multi funCtional led lightings

worKing lamps

art no: 640051

art no: 640054

art no: 640053

art no: 640052

led working lampLed Working lamp9–30V, 36W, available in 2340 lumen.

art no: 640444f 9–30v, 2340 lumen

led working lampLed Working lamp9–33V, 51W, available in 3600 lumen.

art no: 640464f 9–30v, 3600 lumen

art no: 640414f, 640424fLed Working lamp multivolt 9–33V DC. • 1440 lumen.• Round: 116 x 116 x 51 mm• Quadratic: 110 x 110 x 51 mm• Ip67

art no: 640414f

art no: 640424f

Konsol art no: 640055

electronics

26 27

components

• Voltage Range (SMPS 10V – 30V)• ABS frame / Polycarbonate lens• Surface mounting• Slim design h = 13 mm• Different body colours available• Different symbols available

CapaCitive touCh Control Buttons

• Flat surface type and Handrail type• Different symbols available• Different button colours available• Different body colours available• Braille Alphabet Applicate to alla buttons• Ask for your combination

Bus stop Buttons

BaCKhorn and sChool sign flasher relay

art no: 630120 Buttonart no: 630105 Contact housing

art no: 630110 Buttonart no: 630130 Contact housing

art no: 630301 Contact housing

art no: 630306 Button

art no: 630305 Buttonart no: 630300 Contact housing

school sign flasher relayart no: 630104 12Vart no: 630106 24V

Back hornVoltage (nominal) 12,24dB at 1m >94dB( V=28V), >86dB (V=14V)F (Hz) 2800-3000Features: Ø= 55 h=52 mmMetal BracketroHs Conform Waterproof : iP67Operating temp. : -30 / +80°CON-OFF cycles : 80 ± 10 c/mE13 10r-03 12442 certificate EMC

art no: 630201

art no: 630205

art no: 630204

art no: 470015

Button

28

• Voltage Range (SMPS 10V – 30V)• Front side fluorescent prismatic grade retroreflective sheeting• Amber colour Led lighting• Optional metal holder for up or down mounting• Optional lock with key to eliminate unauthorised removal• When the door opens leds start to blink. Leds continue to blinking for 20 seconds more after the vehicle door is closed.

sChool Bus sign unit

• 12V or 24V• Low consumption via led lighting• Invisible text during off position• Available with optional symbol or text within the space

• 12V or 24V• Real Time Clock (RTC technology)

indiCator Bus sign unit

Bus digital CloCKs

Foldable School Bus Sign Unit• Naturally anodized aluminium• Fluorescent prismatic grade 3 retroreflective sheeting• Bulb lights, LED lights

Roof cover for bus signart no: 630200

art no: 630102art no: 630101

art no: 630100

art no: 630050

art no: 630030art no: 630045

art no: 470027 12V

art no: 470025 12V

art no: 630103

art no: 470026 12Vart no: 470035 24V

art no: 630015 12V

art no: 470028 12V

28 29

components

desCriptionMagnetic valves from leading brands such as Danfoss, Sms-tork, Bosch, Wabco and more.Available in 12V and 24V, N/C and N/O. Brass fittings 16 mm and 19 mm available.

2/2 way DC 1/2", Normally Closed. Don’t require any differential pressure. Suitable for non-aggressive liquids and gas fluids.

Protection: IP65Voltage: 12V, 24VFrequency: 50HzCoil insulation class: H (180°C)Coil impregnation: Polyester fiber glassMaterials: Brass, stainless steel, EPDM, copperConnection size: 1/2"Orifice size: 14,5 mmMax pressure: 16 barKV: 62 l/minFluid temp: -10°C / +140°CWeight: 0,72 kg

teChniCal data / torK valves

torKart no:900302 12V DC900302-16 12V DC, incl 16 mm fittings900302-19 12V DC, incl 19 mm fittings900303 12V DC900303-16 24V DC, incl 16 mm fittings900303-19 24V DC, incl 19 mm fittings

VALVES

thermostatiC mixing valveart no: 900200

FRoM LEADINg BRANDS

BosChart no: 900125 12V

art no:500226 g15 – 1/2" x 5/8"500227 g20 – 3/4" x 3/4"500228 g10 – 5/8" x 5/8"500229 g15 – 1/2" x 3/4"

4-way non-return valveart no: 900250

Bitron 3-wayart no: 900114

Bitron 2-wayart no: 900102

pinart no: 900111p

ContaCtart no: 900111C

30

Max system pressure 2,5 bar. Glass reinforced plastic, stainless steel. Motor protection iP 67.

typical application: Circulation of water/antifreeze in heatingsystems for various kinds of vehicles, circulation for cooling fresh water in vehicles.

Art no:900160 12V / 16 mm, 15 l/min, Amp 1,2900161 12V / 20 mm, 22 l/min, Amp 2,2900163 24V / 20 mm, 26 l/min, Amp 1,1900165 24V / 38 mm, 90 l/min, Amp 4

art no: 900165

art no: 900160/161

PA66Art no:1071grS16 Straight connector 16mm1071grS19 Straight connector 19mm1071grS19/16 Straight reducer 19/16mm1071TS16 t connector 16mm1071TS19 t connector 19mm1071TeS19/16 t reducer 19/16mm1071WS16 Elbow connector 16mm1071WS19 Elbow connector 19mm

DelrinArt no:1070gS16 Straight connector Delrin 16mm1070gS19 Straight connector Delrin 19mm1070TS16 t connector Delrin 16mm1070TS19 t connector Delrin 19mm1070YS16 y connector Delrin 16mm1070YS19 y connector Delrin 19mm

Spring Band ClampsVehtec´s Spring Band clamps are suitable for coolant and heating systems with hose connections.

Art no: pkg quantity1040 No 21 20,3–22,5mm 100 pcs1033 No 22 21,3–24,2mm 100 pcs103316g No 24 24–26mm 100 pcs1034 No 25 24–26,8mm 100 pcs103319 No 26 26–28mm 100 pcs1076 No 27 26–29,2mm 100 pcs1035 No 29 28–31,5mm 100 pcs103322g No 32 32–34,5mm 100 pcs

Special tool for clampsArt no: 1055

water pumps

ConneCtors

spring Band Clamps

30 31

art no: 115422/19x100x400 mm

art no: 114222/28x110x110 mm art no: 1146 epdm

19x110x110 mm

art no: 115319/22x110x110 mm

art no: 115722/28x110 mm

art no: 191011Connector with air nipple

Art no:1140 Elbow 100x400mm Ø 16mm1141 Elbow reducer 110x110mm Ø 16/22mm1142 Elbow reducer 110x110mm Ø 28/22mm1143 Elbow reducer 100x400mm Ø 22/16mm1144 Elbow 100x400mm Ø 19mm1145 Elbow 110x110mm Ø 16mm1146 Elbow 110x110mm Ø 19mm1147 Elbow 110x110mm Ø 22mm1149 Elbow reducer 110x1000mm Ø 16/19mm1150 Straight reducer 110mm Ø 16/19mm1151 Straight reducer 110mm Ø 16/22mm1152 Elbow reducer 110x110mm Ø 16/19mm1153 Elbow reducer 110x110mm Ø 19/22mm1154 Elbow reducer 100x400mm Ø 22/19mm

Art no:1155 Elbow reducer 100x400mm Ø 19/16mm1156 Straight reducer 110mm Ø 22/19mm1157 Straight reducer 110mm Ø 28/22mm1158 Double elbow right reducer 100x120x400mm Ø 22/19mm1159 Double elbow left reducer 100x120x400mm Ø 22/19mm1160 Elbow 150x150mm Ø 15mm1161 C profile c/c 166 23x166x30mm Ø 15mm1162 U profile c/c 65 80,5x80,5mm Ø 22mm1163 Elbow 90x90mm Ø 22mm OE1164 Elbow 90x90mm Ø 22mm SAE J201166 Wheel arch profile H=265mm Ø 19/22mm1167 Wheel arch profile H=190mm Ø 22mm191011 Connector with air nipple191012 Elbow with air nipple1198 T 16 mm1199 T 19 mm

hoses

AC hoseArt no: 1064 8 x 18 x 5 mmArt no: 1065 16 x 27,8 x 6 mm

Standard Hose Black – standard length 50m Art no: 1036 iD 16mm, OD 23 mm, 10 barArt no: 1037 iD 19mm, OD 26,5 mm, 10 barArt no: 1038 iD 22mm, OD 30,3 mm, 10 bar

VeHose Flex Grey – Standard length 50mArt no: 1067 iD 16mm, OD 24,7mm, 25 barArt no: 1068 iD 19mm, OD 29,5mm, 25 barArt no: 1069 iD 22mm, OD 33 mm, 25 bar

components

VEHTEC AB | Kråketorpsgatan 10B | SE-431 53 Mölndal, Sweden | Phone: +46(0)31-787 89 00 | Fax: +46(0)31-787 89 09 | info@vehtec.se | www.vehtec.se

ELDI Produkter AB | Selaövägen 1 | SE-124 59 Bandhagen, Sweden | Phone: +46(0)8-749 21 77 | www.eldi.se

Kråketorpsgatan 10 B, SE-431 53 Mölndal, SwedenPhone: +46(0)31-78 78 900 Direct: +46(0)31-78 78 903Fax: +46(0)31-78 78 909 Mobile: +46(0)708-99 56 03hasse@vehtec.se www.vehtec.se

Hasse NilssonSales Manager

Kråketorpsgatan 10 B, SE-431 53 Mölndal, SwedenPhone: +46(0)31-78 78 900 Direct: +46(0)31-78 78 901Fax: +46(0)31-78 78 909 Mobile: +46(0)708-99 56 02johan@vehtec.se www.vehtec.se

Johan NilssonCEO

Kråketorpsgatan 10 B, SE-431 53 Mölndal, SwedenPhone: +46(0)31-78 78 900 Mobile: +46(0)705-70 13 00Fax: +46(0)31-78 78 909 www.vehtec.sebengt@vehtec.se

Bengt LindgrenDirector

Selaövägen 1 Phone: +46(0)8-74 92 177SE-124 59 Bandhagen Fax: +46(0)8-86 74 34 Mobile: +46(0)760-21 67 61info@eldi.se www.vehtec.se

André HugóSales / Technology

Kråketorpsgatan 10 B, SE-431 53 Mölndal, SwedenPhone: +46(0)31-78 78 900 Mobile: +46(0)722-08 85 80Fax: +46(0)31-78 78 909 www.vehtec.sedaniel@vehtec.se

Daniel KeiserProduction / Technology