Post on 27-Mar-2022
3
Incompatible flooring and sill type?No need to replace the sill with ADAptive.
Unmatched versatility.
Unprecedented performance.
Interchangeable caps permit easy changes.
Between the base of the jamb and edge of the sill: Innovative jamb boot: Features pre-drilled screw locations and, once fasteners are installed, supports a more robust corner assembly.
Pre-applied sealing gasket: Behaves as a sealant between the jamb and sill.
At the weatherstrip. Sealing beak: Positioned beneath the weatherstrip, blocks upward water pressure and resulting water infiltration.
Beneath the sill. Full-length caulking strip: Provides a full-length barrier against water infiltration beneath the sill.
3
An end to leaks and repairs.
The ADAptive Sill System protects against door unit failure and resulting service calls with a patent-pending design that achieves unprecedented water-rated performance.
A
Small leaks add up to big problems.
B
ADAptive delivers unmatched flexibilityand versatility, enabling you to do morewith less. Need to change the sill type from standard to tileback? Simply change the cap. Need to cover both inswing and outswing applications with fewer SKUs? ADAptive has you covered with several reversible inswing profiles, compatibility with sill extenders, a resizable sill option that covers multiple widths and more.
A
B
Tileback Cap
Standard Cap
Reversible inswing widths provide a solution for both inswing and outswing applications with one product.
8817 W. Market St., Colfax, NC 272351.800.334.2006 www.enduraproducts.com
INNOVATION PROTECTED UNDER PATENTS AND PATENTS PENDING IN U.S. AND CANADA. SEE WWW.ENDURAPATENTS.COM.
Outswing SillStandard CapBronze Finish
Tileback CapMill Finish
Mull Boot
Mill Bronze
Adaptive sills are available in mill and bronze finishes.
Jamb BootStandard Cap2" Extender Installed.
Standard SealingBulb Cap
Outswing Bumper CapTileback SealingBulb Cap
6-9/16"4-9/16"
Sidelite Seat
Reversible to Outswing Reversible to Outswing Non-Thermal
Reversible to Outswing Reversible to Outswing
Your needs, covered. With a full range of lengths, widths and application types, and features like compatibility with extenders and reversible, resizable products, ADAptive is ready to take on your project.
ADAptive features aftermarket cap options to enhance the seal between the sill and door bottom, including a flexible sealing bulb and outswing bumper cap style. Note: These products are not ADA-compliant.
6-9/16" jamb boot can be resized to use with 5-1/4", 4-7/8" and 4-9/16" frames.
7-9/16" Inswing Sill features break points and can be resized to 4-9/16", 5-1/2" and 6-9/16".
4-9/16" x 1-1/2" x 2-1/2" 4-3/8" x 1-1/2" x 2-1/2" 3-9/16" x 1-1/2" x 2-1/2" 3-9/16" x 1" x 2"
Adaptive Inswing Sills (Standard or Tileback Caps)
ADAptive Outswing Sills
ADAptive Sidelite and Hinged Patio Sills
ADAptive Mull Boots
ADAptive Specialty Caps
ADAptive Jamb Boots ADAptive Sill Extenders
Adaptive sills are available in the following lengths: 2/6, 2/8, 2/10, 3/0, 3/6, 5/0, 5/4, 6/0, 9/0, 12/0Hinged Patio up to 12/0 (Quad), CSL up to 1/6-6/0-1/6