Post on 30-Oct-2015
description
Ups UNIQUE
A SOURCE OF COMPLETE PACKAGING SYSTEMS
M A N U F A C T U R E & E X P O R T E R
I EUN QU
UN QUEI
UNI UEQ
N EU IQU
AUTOMATIC FORM-FILL & SEAL MACHINE
AUTOMATIC LIQUID-FILL & SEAL MACHINE
TECHNICAL SPECIFICATIONS
SEALING TYPES 3 Side Seal, 4 Side Seal & Center Sealing
PACKAGING SIZE (Length) 40 - 200 mm.
(Film Width) 60 - 350 mm.
PACKING SPEED 40 - 90 Pouches / Per Minutes.
(Depending upon the Size)
PACKAGING RANGE 05 gms, to 100 gms.
PACKING MATERIAL Any heat sealable Laminated Films.
MOTOR 1/2HP., 220V AC, Single Phase.
HEATER LOAD 2 Kw. Maximum.
MACHINE DIMENSIONS L 750 x W 550 x H 1800 (mm)
NET Wt. OF MACHINE 450 Kgs (Approx.)
SEALING TYPES 3 Side Seal, 4 Side Seal & Center Seal
PACKAGING SIZE (Length) 40 - 200 mm.
(Film Width) 60 - 350 mm.
PACKING SPEED 40 - 90 Pouches / Per Minutes.
(Depending upon the Size)
PACKAGING RANGE 05 ml. to 250 ml.
PACKING MATERIAL Any heat sealable Laminated Films.
MOTOR 1/2HP., 220V AC, Single Phase.
HEATER LOAD 2 Kw. Maximum.
MACHINE DIMENSIONS L 750 x W 550 x H 1800 (mm)
NET Wt. OF MACHINE 450 Kgs. (Approx.)
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- Packing Various Powders, Granules, Tea, Coffee,
Dhana Dal, Tablets, (Pharmaceuticals) Mehandi, Namkeen, etc.
APPLICATIONS:-
Highly Suitable for :- Liquids, Paste, Tomato Ketchup, Wine, Shampoo,
Jam, Soya milk and Mineral Water etc.
TECHNICAL SPECIFICATIONS
AUGAR FILLING MACHINE WITH WEIGHING
APPLICATIONS:-
Highly Suitable for :- Wheat flour, Turmeric Powder, Chilli Powder,
Pesticides Powder, Mehandi Powder, Glucose Powder or any type of
fine Powder etc.
OPERATION Mechanical / Pneumatic.
CONTROL Electronically or PLC controlled.
OUTPUT 15-60 Fills/min & 5-8 Fills/min with weighing
(Subject to model & gramage)
PACKAGING RANGE 1gm to 10 Kg.
PACKAGING MATERIAL Any ready pouches, jar, containers etc.
POWER REQUIREMENT 420V AC 3Phase, 50 Hz (Subject models)
MODEL UA-010
MODEL UA-020
MODEL UA-030 A
U IQNUE
U IQUEN
Screw conveyor as per specific requirements.
N Q EU I U
AUTOMATIC FORM-FILL & SEAL MACHINE
AUTOMATIC COLLER TYPE AUGAR FILLER WITH
SERVO BASED HIGH SPEED MACHINE
AUTOMATIC COLLAR TYPE CUP FILLER MACHINE WITH PLC
TECHNICAL SPECIFICATIONS
SEALING TYPES 3 Side Seal, 4 Side Seal & Center Sealing
PACKAGING SIZE (Length) 40 to 300 mm.
(Film Width) 60 to 400 mm.
PACKING SPEED 15 to 60 Pouches / Minutes.
(Depending upon the Size)
PACKAGING RANGE 5 - 20, 20 - 50, 50 -100, 100 - 250, 250 - 500 gms.
PACKING MATERIAL Any heat sealable Laminated Films.
MOTOR 1/2HP., 220V AC, 50Hz., Single Phase.
HEATER LOAD 4 Side Seal, 3 Side & Center Seal
(150x2 Nos., 450x2 Nos.)
DIMENSIONS / Wt. L :800, W :610, H :1940 (mm) / 400 Kgs.
SEALING SYSTEMS Center Seal with constant heat.
CENTER FIN SEAL 10mm. to 12mm.
PACKAGING SIZE (Length) 100 to 300 mm.
(Film Width) 220 to 500 mm.
PACKING SPEED 15 to 90 Pouches / Minutes Approx.
PACKAGING RANGE 10gms. to 1Kg, 1Kg to 2Kg, 5Kg to 10Kg.
PACKING MATERIAL Any heat sealable Laminated Films.
TYPES OF FILLER Cup Filler, Auger Filler, or Weigh Filler.
POWER Consumption 4 KVA, AC, Three Phase / Single Phase
MACHINE DIMENSIONS L 2100 x W 700 x H 1690 (mm)
NET Wt. OF MACHINE 600 Kgs (Approx.)
TECHNICAL SPECIFICATIONS
SEALING SYSTEMS Central Seal with constant heat.
CENTRAL FIN SEAL 10mm. to 12mm.
PACKAGING SIZE (Length) 100 to 300 mm.
(Film Width) 220 to 500 mm.
PACKING SPEED 15 to 50 Pouches / Minutes Approx.
PACKAGING RANGE 100 gms, to 5Kg.
PACKING MATERIAL Any heat sealable Laminated Films.
TYPES OF FILLER Cup Filler, Auger Filler, or Weigh Filler.
POWER Consumption 3 KVA, AC, Single Phase /Three Phase.
MACHINE DIMENSIONS L 2100 x W 1000 x H 2200 (mm)
NET Wt. OF MACHINE 500 Kgs (Approx.)
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- Turmeric Powder, Spices, Chillies Powder, Mehandi
Powder, Glucose Powder, Ors Powder, Baby Foods, etc.
APPLICATIONS:-
Highly Suitable for :- Spices Powder, Mehandi Powder, Atta, Besan, Maida
Detergent Powder, Pesticides Powder, and other similar Products.
APPLICATIONS:-
Highly Suitable for :- Rice, Pulses, Bio-fertilizer, Namkeen, Tea, Detergent
Powder, Salt, Suger and other similar Products.
MODEL UA-040
MODEL UA-050A
MODEL UA-050BPLCBA
S DE
Sv
ero
LPCS
BAED
IUNQUE
UNIQUE
UNIQUE
UN QUEI
HIGH SPEED
TECHNICAL SPECIFICATIONS
SEALING TYPES 3 Side Seal, 4 Side Seal & Center Sealing
PACKING SPEED 15 to 60 Pouches / Minutes.
(Depending upon the Size)
PACKAGING RANGE (A) 10 to 500 gms. In single Machine.
(B) 10 - 250 gms., 100 - 500 gms In single Mc.
PACKING MATERIAL Any heat sealable Laminated Films.
POWER CONSUMPTION 3 Kw three phase / single phase.
DIMENSIONS / Wt. (Approx.) L :1000, W :1000, H :2300 (mm) / 600 Kgs.
TECHNICAL SPECIFICATIONS
SEALING TYPES Pillow type continues.
WRAPPING SIZE LENGTH : 100 to 350 mm,
WIDTH : 90 to 450 mm,
HEIGHT : 10 to 100 mm.
PACKING SPEED 40 to 200 Packets /Minutes.
(Depending upon the size)
PACKING MATERIAL Any heat sealable Laminated Films.
MOTOR 1HP., 220V AC, 50Hz., Single Phase.
POWER Consumption 2.5 kw, DC. (with DC Drive) Single Phase.
MACHINE DIMENSIONS L 3600 x W 1500 x H 1800 (mm)
NET Wt. OF MACHINE 450 Kgs (Approx.)
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- Various Powders, Granules, Tea, Coffee, Dhana Dal,
Tablets, Dhana Dal, Namkeen, Etc.
APPLICATIONS:-
Highly Suitable for :- Packing of Biscuits, Chocolates, Soaps, Stationary
Items, Syringes, Ball Bearings, Auto Parts, Toys and other solid products.
MODEL UA-051A / UA-051B
MODEL UA-060
MODEL UA-070AUTOMATIC HORIZONTAL FLOW WRAP MACHINE
SEMI AUTOMATIC FILLING MACHINE
AUTOMATIC FFS MACHINE PNEUMATIC TYPE
PACKING SPEED 5 to 25 Pouches / Minutes.
(Depending upon the quantity)
PACKAGING RANGE 500 gms. to 5 Kgs.
MOTOR 1/2HP., 220V AC, 50Hz., Single Phase.
DIMENSIONS / Wt. L :700, W :800, H :2100 (mm) / 300 Kgs.
UNIQUE
N QU
U IE
APPLICATIONS:-
UA-051A Highly Suitable for :- Spices Powder, Mehandi Powder,
Glucose Powder, Ors Powder etc.
UA-051B Highly Suitable for :- Kurkure, Namkeen, Snecks, Tea
Powder, Spices etc.
UN UEIQ
IUN QUE
UA-051A UA-051B
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
(Depending upon the Size)
gms. to 10 s.
Any heat sealable Laminated Films.
Dimensions L-1200, W-1000, H-2550 (mm)
Control PLC Controlled
Mode of Operation Pneumatic
Filling Capacity (Range) 5 Kg
Packaging Material
Power Requirement 220V Single Phase OR 420V Three Phase
Compressed Air Req. 8 CFM with 6 bar pressure
Variety of Models 5 - 50g, 10 -100g, 20 - 250g, 50 - 500g,
200 - 1000g, 1 - 5 kg, 2 - 10 kg.
Filling Speed 1000 to 4000 pouches/hr
APPLICATIONS:-
Highly Suitable for :- Kurkure & Potato Chips, Chlwda, Namkeen,
Dry-Fruits, Pulses, Grains, Tea, Sugar, Seeds etc.
MODEL UA-090AUTOMATIC COLLAR TYPE WEIGH FILLER MACHINE
APPLICATIONS:-
Highly suitable for :- Pulses, Wafers, Dry Fruits, Tea Powder, Candies,
Namkeen, Whole spices, Seeds and Detergent Powder etc.
Linear weigh filling system is a loadcell based filling technology to pack the material with
weighing. Linear vibratory feeders are used to feed the material from the storage
hopper to the weighing pan. The electronic control panel consists of a sophisticated
electronic hardware and software control the rate of vibration and continuously
measures the weight that falls inside the weighing pan. Intially in the coarse mode the
vibration/feed rate is high and the material flows into the weighing pan at a high speed.
Once the material in the weighing pan reaches nearly 80% to 90% of the target weight
the machine automatically enters in the fine mode where the material trickles down and
the vibration finally stops as soon as the target weight is achieved. The weighted material
is then dropped automatically or by pressing a foot switch in the final packet/carton. This
system is called A single head weighing machine and by this single head machine 6 to 10
fills can be taken per minute. For more speed the number of weighing head can be
increased.
FEATURES:-
Single machine can be used for different products
and different weights, highly suitable for products
with variable density, products which have tendency
of breakage can be easily packed, products with
irregular shape and sizes can be easily packed
Number of Heads Single Head / Double Head / Multi Head
Feeding Method Linear Vibratory Feeder
Weighing Range 1gms to 1kg, 5kg to 10kg, 10kg to 50kg
Speed (fills / Min) 8-14 depending upon the material
Weighing Accuracy 0.1% to 2% depending upon the material
Power Supply 230V. AC. Single phase 300VA per Head
LINEAR WEIGH FILLER MACHINE
MODEL UA-080
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- industries of food, pharmacy, seed and
chemical & light industries for the sealing any heat sealable pouches,
bags and sachets made by film and various composite films
MODEL UA-033MULTI FUNCTIONAL PLASTIC FILM SEALING MACHINES
MODEL UA-033 (900W.)
POWER SUPPLY 500 W. 110V. / 220V. AC.
SEALING SPEED 0 to12 Metre / Minute.
SEALING THICKNESS 6 to12mm.
FILM THICKNESS 0.02mm to 0.80mm.
TEMPERATURE SCOPE 0-300C
DIMENSION / Wt. L : 880, W : 350, H : 320 (mm.) / 22kgs.
UNIQ EU
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- Canned food, cosmetic, bottles commodity,
plastic bottle, liquid bottle and beverage, etc
MODEL UA-044AUTOMATIC SHRINK PACKING MACHINES
MODEL UA-044A UA-044B
VOLTAGE 220V/380V. 50/60Hz. 220V/380V. 50/60Hz.
POWER 6.5kw. 8kw.
CONVEYOR BEARING 10 KG. 30KG.
SPEED 0-13m/min. 0-13m/min.
TUNNEL SIZE(mm.) L900, W450, H(50-250). L1200, W450, H(50-350).
DIMENSION L1200, W650, H1240. L1200, W650,H1340.
NET WEIGHT 120kgs. 150kgs.
UN QUEI
TECHNICAL SPECIFICATIONS
Number of Heads Single Head.
Feeding method Elevator feeder.
4 to 16 fills/ min.
(Depending upon the Size)
2kgs. to 25kgs.
2Kw.
Weight of machine. 1800Kgs. Approx.
Filling Speed
Filling Capacity (Range)
Power Requirement 220V AC Single Phase.
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- packaging of Granule, Nuts, Bean, Rice, Tea etc.
APPLICATIONS:-
Highly Suitable for :- Kurkure & Potato Chips, Farsan,Chiwda, Namkeen, Dry -
Fruits, Pulses, Grains, Tea, Sugar, Seeds, Frozen cut vegetable etc.
MODEL UA-092
MODEL UA-091MULTI HEAD COMBINATION WEIGHER
High Speed & High Precision weighing is the uniqueness of multihead
weigh filler. UNIQUE series is well known for its pouch finish & sealing
intactness which prevents leakage of inert gas from pouches & gives
extended product shelf life.
(Depending upon the Size)
Any heat sealable Laminated Films.
DIMENSIONS / Wt. Approx. W-1800, B-1800, H-3350 (mm) /1400 Kgs.
Control PLC Controlled.
Mode of Operation Pneumatic.
Filling Capacity (Range) 10 g to 1kg
Packaging Material
Power Requirement 420V. AC Three Phase, 50Hz.
Compressed Air Req. 8 CFM with 6 bar pressure
Reel Core Diameter 70mm to 76mm. Max. Weight 50 kg.
200g - 1000g, 1 kg - 5 kg, 2 kg - 10 kg.
Filling Speed 1000 to 4000 pouches/hr
Feature
This machine consists of elevator, automatic weighing machine, equipped with
pneumatic bag-clamping device. Suitable for packaging of disperse products. The
elevator elevates the product to the feed hopper of weighing machine for automatic
weighing, transport and sealing. Its use and maintenance are both very convenient.
SEMI AUTOMATIC WEIGH FEEDER
N QU I UE
UNIQUE
APPLICATIONS:-
Highly Suitable for :- Mixing wet & dry powders.
MODEL UA-055POWDER MASS MIXER
All contact parts of S. Steel and M. Steel. Gear box hobing gear
with mechanical fitting arrangement.
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
APPLICATIONS:-
Highly Suitable for :- Liquid, Oil, Cream, Juice and like items.
APPLICATIONS:-
Highly Suitable for :- Drying all type of products.
APPLICATIONS:-
Highly Suitable for :- To convey powders from one station to another
station like, from one pulveriser to another, or from pulviser to mixing
unit or to pouch packing machines etc.
MODEL UA-066
MODEL UA-077
MODEL UA-088SCREW CONVEYOR
With uniform circulation of hot air in the drying chamber, complete with motor.
HOT AIR TRAY DRYER
FILL CAPACITY 2ml. To 1 ltr. (By suitable syringe)
MOTOR 0.5 HP /1 HP, 220V AC, Single Phase
OUTPUT 600 to 1200 Bottle per hour.
NET WEIGHT Approx 100 Kg.
CAPACITY 2Kgs./min. To 200Kgs./min.
POWER Req. 220V AC, 50Hz. Single Phase.
( up to 75Kgs. capacity )
420V AC, 50Hz. Three Phase.
( optional variable frequency )
SEMI AUTOMATIC LIQUID FILLING MACHINE
TECHNICAL SPECIFICATIONS
Capacity Tray 6 12 24 48 96 192
Width 54* 54* 54* 78* 134* 134*
Depth 21* 21* 37* 40* 40* 76*
Hight 23* 42* 42* 74* 74* 74*
Heater load 3kw. 5kw. 5kw. 7.5kw. 15kw. 30kw.
Fan Motors HP HP HP 1 HP 2 HP 4 HP
Standard Tray Size ss 32 x 16 x 1
UNIQUE
UNIQUE
EUNIQU
UN Q EI U
NOTE: We reserve the right to change design and modify specifications without notice
UNIQUE PACKAGING SYSTEMSPlot No. 24B/5 Industrial Area, N.I.T. FARIDABAD -121001 (Haryana) INDIA
Phones : 91-129-4057522, 2441919, (M) 09810234311, 09818844311
Tele Fax: 0129-2441919 E-mail: info@uniquepackagings.com
info@uniquepackmachines.com, Website: www.uniquepackagings.com
www.uniquepackmachines.com
niag gck a SPe ystuq emin sU
niag gck a SPe ystuq emin sU
Ups
WE DESIGN, DEVELOP PACKAGING MACHINE TO YOUR NEEDS
WE BELIVE IN HONESTY, QUALITY & COMMITMENT
MANUFACTURE & EXPORTER
Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8