Post on 14-Oct-2020
ENERGY: NATURAL GAS & OIL FIELD
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting for power transmission, product handling and linear positioning applications. Our position in the industry as a global leader is due to our worldwide manufacturing, fabrication and distribution locations, and our commitment to investment in product, material and process development.
Megadyne offers a number of products and accessory items supporting the oil and gas industry. They are found on applications from drilling and extraction to transport and delivery. Megadyne belts provide an important function ensuring efficient, reliable operation whether transmitting power or moving product.
From land-based to offshore oil exploration this brochure specifically identifies those key pieces of process and auxiliary equipment where our belts are most commonly used. Please enquire about our brochures and ask Megadyne technical department for detailed information about belt applications in the energy sector.
Editi
on: O
ctob
er 2
019
- W
eb E
ditio
n: O
ctob
er 2
019
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008 info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne* info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
Energy: Natural Gas & Oil Field
POWERING GLOBAL INDUSTRY
* Manufacturing locations
MEGADYNE ISORAN SYNCRONOUS GOLD, SILVER2SUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER FiberglassFEATURES High stability and resistance, antistatic*Standard Width Range - Megadyne will cut to desired width upon request.
Belt Properties
MEGADYNE V-BELTSSUPPLIED AS Endless, wrapped or raw edgeLENGTH Consult MegadyneWIDTH According to sectionSECTION Wrapped B, C, D Narrow 3V, 5V, 8V;
Raw Edge BX, CX TENSIONING MEMBER PolyesterFEATURES Long life and good performance
MEGADYNE ISORAN SYNCRONOUS PLATINUMSUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER Special Dual CoreFEATURES High stability and resistance*Standard Width Range - Megadyne will cut to desired width upon request.
DRILLING EXTRACTION REFINING
MEGADYNE V-BELTS - PLURIBANDSUPPLIED AS EndlessLENGTH 2540-15250 mmWIDTH According to the number of V-BeltsSECTION R8V TENSIONING MEMBER PolyesterFEATURES Oil and heat resistant, static dissipa-
ting
ENERGY: NATURAL GAS & OIL FIELD
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting for power transmission, product handling and linear positioning applications. Our position in the industry as a global leader is due to our worldwide manufacturing, fabrication and distribution locations, and our commitment to investment in product, material and process development.
Megadyne offers a number of products and accessory items supporting the oil and gas industry. They are found on applications from drilling and extraction to transport and delivery. Megadyne belts provide an important function ensuring efficient, reliable operation whether transmitting power or moving product.
From land-based to offshore oil exploration this brochure specifically identifies those key pieces of process and auxiliary equipment where our belts are most commonly used. Please enquire about our brochures and ask Megadyne technical department for detailed information about belt applications in the energy sector.
Editi
on: O
ctob
er 2
019
- W
eb E
ditio
n: O
ctob
er 2
019
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008 info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne* info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
Energy: Natural Gas & Oil Field
POWERING GLOBAL INDUSTRY
* Manufacturing locations
MEGADYNE ISORAN SYNCRONOUS GOLD, SILVER2SUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER FiberglassFEATURES High stability and resistance, antistatic*Standard Width Range - Megadyne will cut to desired width upon request.
Belt Properties
MEGADYNE V-BELTSSUPPLIED AS Endless, wrapped or raw edgeLENGTH Consult MegadyneWIDTH According to sectionSECTION Wrapped B, C, D Narrow 3V, 5V, 8V;
Raw Edge BX, CX TENSIONING MEMBER PolyesterFEATURES Long life and good performance
MEGADYNE ISORAN SYNCRONOUS PLATINUMSUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER Special Dual CoreFEATURES High stability and resistance*Standard Width Range - Megadyne will cut to desired width upon request.
DRILLING EXTRACTION REFINING
MEGADYNE V-BELTS - PLURIBANDSUPPLIED AS EndlessLENGTH 2540-15250 mmWIDTH According to the number of V-BeltsSECTION R8V TENSIONING MEMBER PolyesterFEATURES Oil and heat resistant, static dissipa-
ting
Once oil has been reached, the drilling rig is removed and replaced with a pumpjack. These units are used to mechanically lift fluid out of the well where not enough bottom hole pressure exists for the liquid to reach the surface.
Extraction: PumpjackDrilling: Mud Pumps Drilling: Shear PumpsAir Cooled Heat Exchangers (ACHE) are used in refineries or any application where hot liquids or gasses are being processed. It is a type of heat exchanger that forces air over a set of coils to cool the process. Generally used where a process system generates heat which must be removed. They are also known as a Fin-Fan®.
Refining: Air-Cooled Heat Exchanger
Stimulation fluid, which is a mixture of over 90% water and sand, plus a few chemical additives, is pumped under controlled conditions into deep, underground reservoir formations. The chemicals are used for lubrication, to keep bacteria from forming, to carry the sand, are typically non-hazardous and range in concentrations from 0.1% to 0.5% by volume. They are needed to help improve the performance and efficiency of the hydraulic fracturing. This process creates fractures in the shale rock which contains the oil and natural gas and aids in the extraction process.
Stimulation Fracturing Pump
In the case of oil platform exploration, salt water accompanies the oil to the surface. After separation from the oil, the saltwater is then pumped back into the oil reservoir using a plunger pump. This step helps in the continuing effort to build constant flow of the oil to the surface.
Extraction: Offshore Plunger PumpsAs drilling fluids and contaminants are pumped back out of the drilling area, material is passed through a shaker. The shaker is made up of several screens that separate rock fragments from the water/mud.
Drilling: Shale ShakerWellhead compressors are used to relieve pressure in order to create an efficient flow of oil to the surface and to the holding tank. Wellhead compressors are mainly used when the oil production is beginning to end and where oil still remains in the reservoir. In addition to helping improve the oil flow to the surface, wellhead compressors also extend the life of the well. Wellhead compressors are also used when moving the oil from the holding tank to the oilfield pipeline and onto refining.
1
Shear pumps are belt-driven units used to mix various fluids into the mud that is fed back into the drilling pipe in order to improve drilling efficiency.
Mud pumps (drilling fluid pumps) deliver fluids under high pressure underground to remove the rock cuttings from the bottom of the drill bit/hole as the drill continues its downward pursuit to the oil reservoir. Other fluids delivered from the pump are used to mitigate residue from the drill bit and also help the bit to stay cool. This fluid is then pumped back to the surface where the liquid and rock pieces are then sent through a shale shaker. Mud pumps must handle high horsepower and use large belts.
1
1
PLURIBANDR8Voil resistant, static dissipating
1 PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
Extraction: Wellhead Compressor
1
1 WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
1
1
1
1
1 RPP SILVER28M, 14M high quality materials, antistatic compound conforming to ISO 9563 (BS 2050)
1
PLURIBANDR8Voil resistant, static dissipating
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
WRAPPED V BELTSB, C, D; 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
RPP GOLD8M, 14Mlow friction coefficient, high transmission efficiency and long lasting
Once oil has been reached, the drilling rig is removed and replaced with a pumpjack. These units are used to mechanically lift fluid out of the well where not enough bottom hole pressure exists for the liquid to reach the surface.
Extraction: PumpjackDrilling: Mud Pumps Drilling: Shear PumpsAir Cooled Heat Exchangers (ACHE) are used in refineries or any application where hot liquids or gasses are being processed. It is a type of heat exchanger that forces air over a set of coils to cool the process. Generally used where a process system generates heat which must be removed. They are also known as a Fin-Fan®.
Refining: Air-Cooled Heat Exchanger
Stimulation fluid, which is a mixture of over 90% water and sand, plus a few chemical additives, is pumped under controlled conditions into deep, underground reservoir formations. The chemicals are used for lubrication, to keep bacteria from forming, to carry the sand, are typically non-hazardous and range in concentrations from 0.1% to 0.5% by volume. They are needed to help improve the performance and efficiency of the hydraulic fracturing. This process creates fractures in the shale rock which contains the oil and natural gas and aids in the extraction process.
Stimulation Fracturing Pump
In the case of oil platform exploration, salt water accompanies the oil to the surface. After separation from the oil, the saltwater is then pumped back into the oil reservoir using a plunger pump. This step helps in the continuing effort to build constant flow of the oil to the surface.
Extraction: Offshore Plunger PumpsAs drilling fluids and contaminants are pumped back out of the drilling area, material is passed through a shaker. The shaker is made up of several screens that separate rock fragments from the water/mud.
Drilling: Shale ShakerWellhead compressors are used to relieve pressure in order to create an efficient flow of oil to the surface and to the holding tank. Wellhead compressors are mainly used when the oil production is beginning to end and where oil still remains in the reservoir. In addition to helping improve the oil flow to the surface, wellhead compressors also extend the life of the well. Wellhead compressors are also used when moving the oil from the holding tank to the oilfield pipeline and onto refining.
1
Shear pumps are belt-driven units used to mix various fluids into the mud that is fed back into the drilling pipe in order to improve drilling efficiency.
Mud pumps (drilling fluid pumps) deliver fluids under high pressure underground to remove the rock cuttings from the bottom of the drill bit/hole as the drill continues its downward pursuit to the oil reservoir. Other fluids delivered from the pump are used to mitigate residue from the drill bit and also help the bit to stay cool. This fluid is then pumped back to the surface where the liquid and rock pieces are then sent through a shale shaker. Mud pumps must handle high horsepower and use large belts.
1
1
PLURIBANDR8Voil resistant, static dissipating
1 PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
Extraction: Wellhead Compressor
1
1 WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
1
1
1
1
1 RPP SILVER28M, 14M high quality materials, antistatic compound conforming to ISO 9563 (BS 2050)
1
PLURIBANDR8Voil resistant, static dissipating
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
WRAPPED V BELTSB, C, D; 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
RPP GOLD8M, 14Mlow friction coefficient, high transmission efficiency and long lasting
Once oil has been reached, the drilling rig is removed and replaced with a pumpjack. These units are used to mechanically lift fluid out of the well where not enough bottom hole pressure exists for the liquid to reach the surface.
Extraction: PumpjackDrilling: Mud Pumps Drilling: Shear PumpsAir Cooled Heat Exchangers (ACHE) are used in refineries or any application where hot liquids or gasses are being processed. It is a type of heat exchanger that forces air over a set of coils to cool the process. Generally used where a process system generates heat which must be removed. They are also known as a Fin-Fan®.
Refining: Air-Cooled Heat Exchanger
Stimulation fluid, which is a mixture of over 90% water and sand, plus a few chemical additives, is pumped under controlled conditions into deep, underground reservoir formations. The chemicals are used for lubrication, to keep bacteria from forming, to carry the sand, are typically non-hazardous and range in concentrations from 0.1% to 0.5% by volume. They are needed to help improve the performance and efficiency of the hydraulic fracturing. This process creates fractures in the shale rock which contains the oil and natural gas and aids in the extraction process.
Stimulation Fracturing Pump
In the case of oil platform exploration, salt water accompanies the oil to the surface. After separation from the oil, the saltwater is then pumped back into the oil reservoir using a plunger pump. This step helps in the continuing effort to build constant flow of the oil to the surface.
Extraction: Offshore Plunger PumpsAs drilling fluids and contaminants are pumped back out of the drilling area, material is passed through a shaker. The shaker is made up of several screens that separate rock fragments from the water/mud.
Drilling: Shale ShakerWellhead compressors are used to relieve pressure in order to create an efficient flow of oil to the surface and to the holding tank. Wellhead compressors are mainly used when the oil production is beginning to end and where oil still remains in the reservoir. In addition to helping improve the oil flow to the surface, wellhead compressors also extend the life of the well. Wellhead compressors are also used when moving the oil from the holding tank to the oilfield pipeline and onto refining.
1
Shear pumps are belt-driven units used to mix various fluids into the mud that is fed back into the drilling pipe in order to improve drilling efficiency.
Mud pumps (drilling fluid pumps) deliver fluids under high pressure underground to remove the rock cuttings from the bottom of the drill bit/hole as the drill continues its downward pursuit to the oil reservoir. Other fluids delivered from the pump are used to mitigate residue from the drill bit and also help the bit to stay cool. This fluid is then pumped back to the surface where the liquid and rock pieces are then sent through a shale shaker. Mud pumps must handle high horsepower and use large belts.
1
1
PLURIBANDR8Voil resistant, static dissipating
1 PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
Extraction: Wellhead Compressor
1
1 WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
1
1
1
1
1 RPP SILVER28M, 14M high quality materials, antistatic compound conforming to ISO 9563 (BS 2050)
1
PLURIBANDR8Voil resistant, static dissipating
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
WRAPPED V BELTSB, C, D; 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
RPP GOLD8M, 14Mlow friction coefficient, high transmission efficiency and long lasting
Once oil has been reached, the drilling rig is removed and replaced with a pumpjack. These units are used to mechanically lift fluid out of the well where not enough bottom hole pressure exists for the liquid to reach the surface.
Extraction: PumpjackDrilling: Mud Pumps Drilling: Shear PumpsAir Cooled Heat Exchangers (ACHE) are used in refineries or any application where hot liquids or gasses are being processed. It is a type of heat exchanger that forces air over a set of coils to cool the process. Generally used where a process system generates heat which must be removed. They are also known as a Fin-Fan®.
Refining: Air-Cooled Heat Exchanger
Stimulation fluid, which is a mixture of over 90% water and sand, plus a few chemical additives, is pumped under controlled conditions into deep, underground reservoir formations. The chemicals are used for lubrication, to keep bacteria from forming, to carry the sand, are typically non-hazardous and range in concentrations from 0.1% to 0.5% by volume. They are needed to help improve the performance and efficiency of the hydraulic fracturing. This process creates fractures in the shale rock which contains the oil and natural gas and aids in the extraction process.
Stimulation Fracturing Pump
In the case of oil platform exploration, salt water accompanies the oil to the surface. After separation from the oil, the saltwater is then pumped back into the oil reservoir using a plunger pump. This step helps in the continuing effort to build constant flow of the oil to the surface.
Extraction: Offshore Plunger PumpsAs drilling fluids and contaminants are pumped back out of the drilling area, material is passed through a shaker. The shaker is made up of several screens that separate rock fragments from the water/mud.
Drilling: Shale ShakerWellhead compressors are used to relieve pressure in order to create an efficient flow of oil to the surface and to the holding tank. Wellhead compressors are mainly used when the oil production is beginning to end and where oil still remains in the reservoir. In addition to helping improve the oil flow to the surface, wellhead compressors also extend the life of the well. Wellhead compressors are also used when moving the oil from the holding tank to the oilfield pipeline and onto refining.
1
Shear pumps are belt-driven units used to mix various fluids into the mud that is fed back into the drilling pipe in order to improve drilling efficiency.
Mud pumps (drilling fluid pumps) deliver fluids under high pressure underground to remove the rock cuttings from the bottom of the drill bit/hole as the drill continues its downward pursuit to the oil reservoir. Other fluids delivered from the pump are used to mitigate residue from the drill bit and also help the bit to stay cool. This fluid is then pumped back to the surface where the liquid and rock pieces are then sent through a shale shaker. Mud pumps must handle high horsepower and use large belts.
1
1
PLURIBANDR8Voil resistant, static dissipating
1 PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
Extraction: Wellhead Compressor
1
1 WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
1
1
1
1
1 RPP SILVER28M, 14M high quality materials, antistatic compound conforming to ISO 9563 (BS 2050)
1
PLURIBANDR8Voil resistant, static dissipating
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
WRAPPED V BELTSB, C, D; 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
1
LINEA GOLDBX, CXnew generation of raw edge belts, narrow section, resistant to chemical aggressive environments
1
1
WRAPPED V BELTSB, C, D; 3V, 5V, 8Vrubber wrapped V-belts developed with high resistant tensile elements; oil and heat resistant; long service life and low maintenance costs.
PLATINUM RUBBER TIMING BELTS8M, 14Mhigh resistance and long life cycles, even in the most extreme operating conditions
RPP GOLD8M, 14Mlow friction coefficient, high transmission efficiency and long lasting
ENERGY: NATURAL GAS & OIL FIELD
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting for power transmission, product handling and linear positioning applications. Our position in the industry as a global leader is due to our worldwide manufacturing, fabrication and distribution locations, and our commitment to investment in product, material and process development.
Megadyne offers a number of products and accessory items supporting the oil and gas industry. They are found on applications from drilling and extraction to transport and delivery. Megadyne belts provide an important function ensuring efficient, reliable operation whether transmitting power or moving product.
From land-based to offshore oil exploration this brochure specifically identifies those key pieces of process and auxiliary equipment where our belts are most commonly used. Please enquire about our brochures and ask Megadyne technical department for detailed information about belt applications in the energy sector.
Editi
on: O
ctob
er 2
019
- W
eb E
ditio
n: O
ctob
er 2
019
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008 info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne* info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648 info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
Energy: Natural Gas & Oil Field
POWERING GLOBAL INDUSTRY
* Manufacturing locations
MEGADYNE ISORAN SYNCRONOUS GOLD, SILVER2SUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER FiberglassFEATURES High stability and resistance, antistatic*Standard Width Range - Megadyne will cut to desired width upon request.
Belt Properties
MEGADYNE V-BELTSSUPPLIED AS Endless, wrapped or raw edgeLENGTH Consult MegadyneWIDTH According to sectionSECTION Wrapped B, C, D Narrow 3V, 5V, 8V;
Raw Edge BX, CX TENSIONING MEMBER PolyesterFEATURES Long life and good performance
MEGADYNE ISORAN SYNCRONOUS PLATINUMSUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER Special Dual CoreFEATURES High stability and resistance*Standard Width Range - Megadyne will cut to desired width upon request.
DRILLING EXTRACTION REFINING
MEGADYNE V-BELTS - PLURIBANDSUPPLIED AS EndlessLENGTH 2540-15250 mmWIDTH According to the number of V-BeltsSECTION R8V TENSIONING MEMBER PolyesterFEATURES Oil and heat resistant, static dissipa-
ting
ENERGY: NATURAL GAS & OIL FIELD
Founded in 1957 in Mathi, Italy, Megadyne is a manufacturer of industrial belting for power transmission, product handling and linear positioning applications. Our position in the industry as a global leader is due to our worldwide manufacturing, fabrication and distribution locations, and our commitment to investment in product, material and process development.
Megadyne offers a number of products and accessory items supporting the oil and gas industry. They are found on applications from drilling and extraction to transport and delivery. Megadyne belts provide an important function ensuring efficient, reliable operation whether transmitting power or moving product.
From land-based to offshore oil exploration this brochure specifically identifies those key pieces of process and auxiliary equipment where our belts are most commonly used. Please enquire about our brochures and ask Megadyne technical department for detailed information about belt applications in the energy sector.
Web
Edi
tion:
Oct
ober
201
9
AUSTRALIAMelbournePhone +61 (03) 9763 6701aussales@challengept.com
BELARUSMinskPhone +375 17 2802486Info.by@megadynegroup.com
BRASILSorocabaPhone +55 15 2101 7700Info.br@megadynegroup.com
CANADAEdmontonPhone +1 780 461 4400Info.ca@megadynegroup.com
MontrealPhone +1 514 31 2341Info.ca@megadynegroup.com
TorontoPhone +1 905 602 4400Info.ca@megadynegroup.com
CHINABeijingPhone +86 10 8150 7478info.cn@megadynegroup.com
FoshanPhone +86 757 8381 5530info.cn@megadynegroup.com
Ningbo*Phone +86 574 8650 5008info.cn@megadynegroup.com
Phone +86 574 8833 4378sales@challengept.com
Qingdao*Phone +86 532 8658 0951info.cn@megadynegroup.com
ShanghaiPhone +86 21 5447 1473info.cn@megadynegroup.com
Xi’anPhone +86 29 86358108info.cn@megadynegroup.com
COLOMBIABogotàPhone + 57 (1) 471 0503Phone + 57 (1) 893 9890Info.co@megadynegroup.com
CartagenaPhone + 57 (5) 669 3604Info.co@megadynegroup.com
CZECH REPUBLICPraguePhone +420 2 8481 7181Info.cz@megadynegroup.com
FRANCEParisPhone +33 1 6079 8200info.fr@megadynegroup.com
St. Jean De Maurienne* info.fr@megadynegroup.com
GERMANYBorchenPhone +49 5251 8735 0info.de@megadynegroup.com
Elchingen*info.de@megadynegroup.com
HUNGARYBudapestPhone +36 23 428 628info.hu@megadynegroup.com
INDIAChennai*Phone +91 98841 81175 info.in@megadynegroup.com
IRELANDDublinPhone +353 1 456 6311ireland@challengept.com
ISRAELCaesareaPhone +972 4 6371485sales@megabelt.co.il
ITALYTurin*Phone +39 011 926 8052info@megadynegroup.com
Pescara*Phone +39 085 9700547info.it@megadynegroup.com
VenicePhone +39 041 929 367info.it@megadynegroup.com
MEXICOMexico C.P.Phone +52 55 5587 3680info.mx@megadynegroup.com
PERULimaPhone + 51 713 0069info.pe@megadynegroup.com
POLANDBielsko BialaPhone + 48 32 447 7179info.pl@megadynegroup.com
Bydgoszcz*info.pl@megadynegroup.com
SOUTH AFRICAJohannesburgPhone + 27 (0) 12 661 1652info.za@megadynegroup.com
Phone + 27 (0) 11 3976115sasales@challengept.com
Cape TownPhone +27 (0)21 9820772info.za@megadynegroup.com
SPAINVilanova*Phone +34 93 811 5450info.es@megadynegroup.com
SWEDEN KristianstadPhone +46 10 1309600info.se@megadynegroup.com
THAILANDBangkokPhone +66 966 207648info.th@megadynegroup.com
TURKEYIzmirPhone +90 232 877 07 00 info.tr@megadynegroup.comU.K.BirminghamPhone +44 1384 215 021info.uk@megadynegroup.com
WolverhamptonPhone +44 (0) 1902 866116uksales@challengept.com
U.S.ACaliforniaPhone +1 323 265 8061info.us@megadynegroup.com
FloridaPhone +1 813 241 4111info.us@megadynegroup.com
Georgia*info.us@megadynegroup.com
IllinoisPhone +1 630 752 0600info.us@megadynegroup.com
New Jersey Americas HQPhone +1 973 227 4904info.us@megadynegroup.com
North Carolina*info.us@megadynegroup.com
OregonPhone +1 503 231 7224info.us@megadynegroup.com
TexasPhone +1 972 438 6992info.us@megadynegroup.com
HEADQUARTERS
ITALY TurinVia S. Lucia, 11410075 Mathi (Torino) Phone +39 011 926 8052info@megadynegroup.com
www.megadynegroup.com
Energy: Natural Gas & Oil Field
POWERING GLOBAL INDUSTRY
* Manufacturing locations
MEGADYNE ISORAN SYNCRONOUS GOLD, SILVER2SUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER FiberglassFEATURES High stability and resistance, antistatic*Standard Width Range - Megadyne will cut to desired width upon request.
Belt Properties
MEGADYNE V-BELTSSUPPLIED AS Endless, wrapped or raw edgeLENGTH Consult MegadyneWIDTH According to sectionSECTION Wrapped B, C, D Narrow 3V, 5V, 8V;
Raw Edge BX, CX TENSIONING MEMBER PolyesterFEATURES Long life and good performance
MEGADYNE ISORAN SYNCRONOUS PLATINUMSUPPLIED AS Endless LENGTH 8M 248 - 4400 mm
14M 966 - 4956 mmWIDTH 12 - 170 mm*PITCH 8M, 14MTENSIONING MEMBER Special Dual CoreFEATURES High stability and resistance*Standard Width Range - Megadyne will cut to desired width upon request.
DRILLING EXTRACTION REFINING
MEGADYNE V-BELTS - PLURIBANDSUPPLIED AS EndlessLENGTH 2540-15250 mmWIDTH According to the number of V-BeltsSECTION R8V TENSIONING MEMBER PolyesterFEATURES Oil and heat resistant, static dissipa-
ting