Post on 04-Oct-2020
469399 rev00TC6
3032-55"
75 x 75mm100 x 100mm, 200 x 100mm200 x 200mm, 300 x 300mm400 x 200mm, 400 x 400mm
Fit Wall
Bracket
Covers
7
Cable Management
Ensure cables don’t restrict arm movementCheck all fittings are tight
9 Lock tilt
Ø3mmWood
Ø8mmMasonry 10mm
Tools Recommended
Box Contents
A
Measure the TV fixing holes 2
Prepare the TV mounting plate
OPTION 1OPTION 2
B1
Your TV mount fits the following TV fixing sizes
OPTION 2400 x 200mm
OPTION 3300 x 300mm, 400 x 400mm
OPTION 175 x 75mm, 100 x 100mm,200 x 100mm, 200 x 200mm
x4
Use the option that fits your TV fixing sizes
3
Retain all packaging in case the bracket needs to be returned. Contents may vary from photography/ Illustrations. You will not need all these parts, so expect there to be some left over depending upon thespecification of your TV.This product is intended for indoor use only. Use of this product outdoors could lead to failure andpersonal injury.
It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard andvoid of any services (eg gas, electricity, water etc).AVF accept no responsibility for any damage or loss caused by installing this product in a substandard wall.Periodically check all nuts and bolts are tight.
IF YOU ARE IN ANY DOUBT, CONSULT A QUALIFIED CONTRACTOR
This product is sold as a home DIY product and as such, it is the responsibility of the installer toensure the product is correctly installed.
VESATV Fixing
Holes
10mm
C
CB1
B1
B2
B2
Prepare TV Bracket 1
i
ii
Remove andkeep for step 8
Remove andkeep for step 3
100mm
200mm
100mm
200mm
400mm
200mm
400mm
300mm
300mm
400mm
OPTION 3
B1 or B2
U1
U1
U2U2
B2
B2
B1
B2
B1
B1
B2
Connect TV8
C
C
i
Help Line: 0333 320 8027Monday - Thursday 08:30 - 17:00 Friday 08:30 - 16:00
Calls charged at local rate
Read the operating instructions and keep them in a safe place.If you have any questions about this product or issues with installation
contact the help line before returning this product to the store.
STOP400mm
300mm
300mm
400mm
75mm
75mm
100mm
ii
Installation video guide and TV Height Calculator tool at myTVmount.com
U1x8
M610mm
U2x8
M6
T1x4
M416mm
M6
T10x4
T9x4
M5M4
30mm
T2x4
M516mm
T3x4
M616mm
T5x4
M630mm
T6x4
M816mm
T7x4
M830mm
T8x4
M530mm
T4x4
T12x8
M6
W3x3 W2x3 W1x3 T11x4
Remove dust from hole
65mm
Lubricate screw thread with soapTighten with hand tools only Lubricate screw thread with soapTighten with hand tools only
Solid Wall6 Wood Stud6
50mm
W2 W1
Ensure drill marks are in the centre of the wood stud
Ø8mmMasonry
Ø3mmWood
Deciding the correct screw and spacer combination4
You are provided with 4 diameters
fixing screws, M4, M5, M6 and M8.Determine the screw diameter thatfits and remember for the next step
of TV
NoTV has flat back
and flush fixing holes
MaybeTV has flat back withrecessed fixing holes
YesTV has irregular or
obstructed back
When deciding which screw diameter andlength is suitable for your TV it is important
to STOP immediately as soon as you feelany resistance to prevent damage to your TV
After completing step 5 you will have fittings left over, please keep in a safe place forfuture reference
Attach the bracket to the back of your TV using a suitable combination of screw, washer
and spacer combinations. DO NOT OVERTIGHTEN!
Ø8mm
Ø3mm
Do not use W2 wall plugs in wood stud
Fitting the TV Mounting Plate5
Do I need to use spacers T11 or T12 ?Spacers are provided so that you can achieve the correct fit between the back of yourTV and Mounting Plate, please see below for examples of when spacers are required
Top
T9 or onlyrequired for
certain screws
T10
T11 or T12if required
T1 - T8
Top
A A
W1
Get it right with our easy to use online TV Height Calculator at myTVmount.com
Get it right with our easy to use online TV Height Calculator at myTVmount.com
T9 T9 T10
T5/T6
T7/T8T3/T4T1/T2
and / orIf required
T12T11