VIRAMID-CPC-CS® Tester Contact Point Corrosion on Carbon Steel

Application’s

T-CONNECTOR SUPPORTS | SADDLE SUPPORTS |HANGERS |BEAM LOCATIONS| PAD| CLAMP| FLARE STACKS | DEAD LEGS | CUI | OFF SHORE | WATER MAINS | TANKS | TANK WELDS FOR POROSITY |UNDERGROUND PIPE

Pipping at supports I-Beams High Pressure Piping T-Pipe

Advantages of Using VIRAMID-CPC-CS®

QUICK INSPECTION | COST EFFECTIVE | REPEATABLE

RESULTS | USER FRIENDLY | CONVENTIONAL

TRAINING | 8 HOUR SHIFTS |NO OVERTIME |

PROCESS DOES NOT NEED TO BE SHUTDOWN TO

PERFORM THE INSPECTION |MATERIAL NEEDS TO BE

BARE METAL | CONTACT SURFACE MUST BE CLEAN OF

DUST, DEBRIS, PAINT, RUST.

PEC Corrosion Under Insulation (CUI)

CARBON STEEL PIPE | SIZE: 219MM (8.63 IN) | NORMAL THICKNESS 8.2 MM (0.32 IN)

External Corrosion Scabs (real sample)

CARBON STEEL PIPE |SIZE: 273 MM (10.75 IN) | NOMINAL THICKNESS 7 MM (0.28 IN)

Two Punch Knockout for CUI VIR Inspection has the two-punch knockout for CUI that no one else can provide. VIR Inspection is the only company that offers eddyfi® Pulsed Eddy Current (PEC) combined with our patent pending VIRAMID® contact point corrosion tester & inspection technique for testing for corrosion at support areas, brackets, beam areas and dummy legs where PEC has limitations.

These two inspection techniques combined can provide almost 100% inspection coverage of the line your inspecting.

FIRST PUNCH: Perform PEC inspection on insulated piping.

SECOND PUNCH: Perform Contact Point Corrosion inspection on all touch point areas insulated or non-insulated piping.

FINAL KNOCKOUT: One company, two inspection techniques CPC and PEC, one report, consistency .

PEC + CPC Inspection

Technical Brief

Two Punch Knockout for CUI

Lift® Pulsed Eddy Current

and VIR Inspections VIRAMID CPC-CS®

Contact Point Corrosion.

VIR Inspection Proudly introduces the TWO PUNCH KNOCKOUT for CUI

Contact us

Office: 425-835-0528 832-943-0979

Email: info@vir-inspection.com Web: www.vir-inspection.com

West Coast: VIR Inspection LLC 320 Dayton Street Suite 260 Edmonds, WA. 98020

Gulf Coast: VIR Inspection LLC Under Construction Houston, Texas.

VIR INSPECTION LLC