Ton Hummel

Post on 25-Dec-2014

589 views 7 download

description

Ton Hummel Love Cycling Go Dutch Conference Newcastle, 5 November 2013 Workshop 1: Sustainable safety

Transcript of Ton Hummel

1

Human Behaviour and Design of Cycle Facilities

Ton Hummel:

Principal Safety Engineer at Skanska, Bristol UK.

2

Design of Cycle Facilities

• Are cyclists (and drivers) going to behave the way we intended?

• Are we sure our designs are resulting in correct behaviour?

3

Behaviour of Cyclist

− Does general behaviour in UK differ from the Netherlands?

− Does behaviour differ for different types of cyclists?

4

Differences in Behaviour?

5

Important differences

− Speed

− Acceptance of interruptions and detours

− Acceptance of risk

6

What does this mean for our designs?

Example:

Fast commuting cyclist on shared path (footway/ cycle path).

7

What does this mean for our designs?

Fast commuting cyclist on shared path (footway/ cycle path).

8

Main requirements of all cycle facilities

1. Safe

2. Short

3. Direct

4. Continuous

5. Comfortable

9

Main requirements of all cycle facilities

Not meeting all 5 requirements is likely to result in unexpected behaviour.

10

Unexpected Behaviour?

11

Unexpected Behaviour?

12

Unexpected Behaviour?

13

Unexpected Behaviour?

14

Safe Cycle facilities

− Reducing lateral conflicts (cars overtaking cyclists)

− Reducing conflicts at junctions

− Reducing conflicts at start and end of cycle facilities

15

Reducing lateral conflicts

− Physical segregation (cycle paths)

16

Reducing lateral conflicts

− Physical segregation (cycle paths)

− Non-physical segregation (cycle lanes)

17

Cycle lanes

18

Reducing lateral conflicts

− Physical segregation (cycle paths)

− Non-physical segregation (cycle lanes)

− Other non-physical segregation (for instance use of bus lanes)

19

Reducing lateral conflicts

− Physical segregation (cycle paths)

− Non-physical segregation (cycle lanes)

− Other non-physical segregation (for instance use of bus lanes)

− Mixed traffic

20

Mixed traffic. Profiles to avoid.

Safe are:

A. Narrow profile; car can not overtake cyclist in own lane (or on own side of centre line)

B. Wide profile; car can safely overtake cyclist in own lane (or on own side of centre line)

Avoid:

Critical profiles (anything in between A and B)!

21

Mixed traffic. Non-critical profile.

22

Myths in design of cycle facilities

1. Doing something is better than doing nothing.

23

Myths in design of cycle facilities

1. Doing something is better than doing nothing.

Photo 1

24

Myths in design of cycle facilities

1. Doing something is better than doing nothing.

Photo 2 (same cyclist; a bit further down his route).

25

Myths in design of cycle facilities

2. Requiring cyclists to give way is safer than the other way around.

26

Myths in design of cycle facilities

3. Maintenance of cycle paths is not as “safety critical” as on routes for motorised traffic

27

Myths in design of cycle facilities

4. Hazardous crossings are safer to negotiate as pedestrian than as cyclist (cyclists dismount)

28

Myths in design of cycle facilities

5. Shared use footways are a good and cheap option

29

Myths in design of cycle facilities

6. Shared bus lanes are a good and cheap option

30

Myths in design of cycle facilities

7. Not providing access barriers at start and end of cycle paths will lead to misuse

31

Myths in design of cycle facilities

8. Allowing car parking within cycle lane is acceptable

32

Myths in design of cycle facilities

9. Providing cycle facilities is expensive

33

Myths in design of cycle facilities

10.A major shift in modal split is possible without introducing additional delays for cars

34

Thank you!

Divera Twisk

Ton Hummel

35

Reducing conflicts at Junctions

Important causation factors of accidents with cyclists at junctions:

− Drivers not seeing (or not noticing) cyclist

− Not enough space for cyclists

− Cyclist doing something unexpected

36

Reducing conflicts at Junctions

Potential solutions for those conflict types:

− Advanced stop lines (with proper lead-in to provide enough space for cyclists).

− Continuation of cycle lanes through junction area (preferably in coloured surface).

− Separate stage (or pre-start) for cyclists in signalisation

− Continuation of cycle facilities after junction area.

37

Cyclists on Roundabouts

Photo Fietsberaad

38

Cyclists on Roundabouts

Photo Fietsberaad

39

Cyclists on Roundabouts

Photo Fietsberaad