Transcript of THE CAVALIER RESIDENCES · the cavalier residences a0.02 a0.03 symbol key north arrow elevation...
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
BUILDING CODE SUMMARYPROPOSED USE:CONTACT PERSON:CODE ENFORCEMENT JURISDICTION:BUILDING DATANEW RESIDENTIAL CONSTRUCTIONBUILDING CODE:NUMBER OF STORIES:i CERTIFY THAT THE DESIGN PLANS AND SPECIFICATIONS FOR THIS CONSTRUCTION ARE IN COMPLIANCE WITH THE CRITERIA ESTABLISHED BY THE VIRGINIA RESIDENTIAL CODE 2012.
AutoCAD SHX Text
RESIDENTIALJEREMY SOMMER 678-357-5057VIRGINIA RESIDENTIAL CODE 2012 2 STORIESI UNDERSTAND THAT ANY CHANGE IN DESIGN OR SPECIFICATIONS MUST BE SUBMITTED IN WRITING BY ME TO THE BUILDING DEPARTMENT.
AutoCAD SHX Text
1. BUILDING WILL BE NOISE TESTED BEFORE BUILDING WILL BE NOISE TESTED BEFORE C.O. IS ISSUED. PER R328.2
AutoCAD SHX Text
1
AutoCAD SHX Text
6/15/17 UPDATE PER CITY
AutoCAD SHX Text
COMMENTS
AutoCAD SHX Text
1
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
10/17/17 UPDATE PER CLIENT
AutoCAD SHX Text
2
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
VAR WIDTH PRIVATE UTILITY EASEMENT(IN. 20150708000642650)IN. 20150708000642650))
AutoCAD SHX Text
S 13°50'23" E 65.00'
AutoCAD SHX Text
31.50'
AutoCAD SHX Text
7.00'
AutoCAD SHX Text
18.94'
AutoCAD SHX Text
4.62'
AutoCAD SHX Text
(*)
AutoCAD SHX Text
66.10'
AutoCAD SHX Text
N 13°50'23" W
AutoCAD SHX Text
66.10'
AutoCAD SHX Text
A=1.95'
AutoCAD SHX Text
A=6.06'
AutoCAD SHX Text
1.79'
AutoCAD SHX Text
9.00'
AutoCAD SHX Text
C12
AutoCAD SHX Text
C11
AutoCAD SHX Text
N 76°09'37" E3.00'
AutoCAD SHX Text
33.50'
AutoCAD SHX Text
15A
AutoCAD SHX Text
N 76°09'37" E
AutoCAD SHX Text
30.21'
AutoCAD SHX Text
45.06'
AutoCAD SHX Text
N 13°50'23" W
AutoCAD SHX Text
N 13°50'23" W
AutoCAD SHX Text
23.19'
AutoCAD SHX Text
7.86'
AutoCAD SHX Text
N 76°09'37" E10.94'
AutoCAD SHX Text
S 13°50'23" E
AutoCAD SHX Text
-
AutoCAD SHX Text
CAVALIER BUNGALOW COURT
AutoCAD SHX Text
04/25/16
AutoCAD SHX Text
FOR CONSTRUCTION
AutoCAD SHX Text
RELEASES:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
CHECKED BY:
AutoCAD SHX Text
---
AutoCAD SHX Text
CAVALIER LOT 14 BUNGALOW
AutoCAD SHX Text
VIRGINA BEACH, VA 23451
AutoCAD SHX Text
-
AutoCAD SHX Text
---
AutoCAD SHX Text
A1.01
AutoCAD SHX Text
SITE PLAN
AutoCAD SHX Text
2015 by Sommer Design Studios, L.L.C.,
AutoCAD SHX Text
OVER ALL SITE PLAN
AutoCAD SHX Text
A
AutoCAD SHX Text
1/16" = 1'-0"
AutoCAD SHX Text
SCALE:
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
NOTE: FINISH FLOOR HT TO BE MIN. 3'-0" ABOVE FINISH GRADE HIEGHT
AutoCAD SHX Text
NOTE: VERIFY AND FOLLOW SECTION R602.10.1 OF THE 2012 VA IRC CONCERNING BRACED WALL PANELS, TYP.
AutoCAD SHX Text
NOTE: PER SEC R329 OF VRC 2009 PLACE FIRE EXTINGUISHER WITH RATING OF 2-A:10-B:C IN KITCHEN ISLAND
AutoCAD SHX Text
NOTE: ALL GLAZING TO MEET A MIN. U FACTOR OF U .35 PER 2012 CODE CH. 11 SEC. N1101.5
AutoCAD SHX Text
NOTE:ALL EXTERIOR DOORS AND WINDOWS SHALL MEET OR EXCEED CURRENT CODE REQUIRED DP RATING, U-FACTOR AND SOLAR HEAT GAIN COEFFICIENTS, AND SHALL BE PROTECTED FROM WINDBURN DEBRIS WITH IMPACT GLAZING AS REQUIRED BY APPLICABLE CODES FOR THE PARTICULAR LOCATION OF THE PROJECT SITE. ALL WINDOWS AND EXTERIOR DOORS SHALL MEET THE SOUND ATTENUATION DESIGN CRITERIA FOR THE PROJECT SITE. GENERAL CONTRACTOR SHALL CONFIRM ALL WINDOW AND EXTERIOR DOORS SIZES AND CONFIGURATIONS WITH ARCHITECT AND OWNER PRIOR TO PLACING ORDER, AND SHALL COORDINATE SIZES WITH ACTUAL CONSTRUCTION CLEARANCES AND CODES
AutoCAD SHX Text
(3) 2x10 DROPPED BEAM- SEE SECTIONS
AutoCAD SHX Text
8x16 FOUNDATION VENT, TYP. SEE EXT. ELEVATIONS
AutoCAD SHX Text
ACCESS TO CRAWL SPACE
AutoCAD SHX Text
2x12'S @ 16" o.c., TYP. - SEE SECTIONS
AutoCAD SHX Text
2x12'S @ 16" o.c., TYP. - SEE SECTIONS
AutoCAD SHX Text
(2) 2x12 FOR CANTILEVER2x12 FOR CANTILEVER
AutoCAD SHX Text
2x8 P.T. FLOOR JOISTS @ 16" o.c., TYP.
AutoCAD SHX Text
1X2 CONT. CONCRETE FOOTING, TYP.
AutoCAD SHX Text
BRICK VENEER OVER 8" CMU BLOCK WALL
AutoCAD SHX Text
NOTE:DIMENSIONS TO FACE OF BLOCK - BRICK NOT INCLUDED
AutoCAD SHX Text
NOTE:FOUNDATIONS MAY HAVE TO BE HAND DUG CONSULT WITH TOWN ARCHITECT AND ARBORIST
AutoCAD SHX Text
(3) 2x10 DROPPED BEAM- SEE SECTIONS
AutoCAD SHX Text
(3) 2x10 DROPPED BEAM- SEE SECTIONS
AutoCAD SHX Text
2x12'S @ 16" o.c., TYP. - SEE SECTIONS
AutoCAD SHX Text
(2) 2x12 FOR CANTILEVER2x12 FOR CANTILEVER
AutoCAD SHX Text
(2) 2x12 FOR CANTILEVER2x12 FOR CANTILEVER
AutoCAD SHX Text
(3) 2x10 PT. RIPPED TO 2x8 @ EA. COLUMN
AutoCAD SHX Text
(3) 2x10 PT. RIPPED TO 2x8 @ EA. COLUMN
AutoCAD SHX Text
2x8 P.T. FLOOR JOISTS @ 16" o.c., TYP.
AutoCAD SHX Text
2x8 P.T. FLOOR JOISTS @ 16" o.c., TYP.
AutoCAD SHX Text
12" PIER BLOCK, TYP.
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
6 w/
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
1
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
1
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
2
AutoCAD SHX Text
3
AutoCAD SHX Text
0
AutoCAD SHX Text
6w/
AutoCAD SHX Text
8
AutoCAD SHX Text
3
AutoCAD SHX Text
0
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
3
AutoCAD SHX Text
0
AutoCAD SHX Text
6 w/
AutoCAD SHX Text
8
AutoCAD SHX Text
3
AutoCAD SHX Text
0
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6 w/
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
A1.02
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
6 C.O.w/
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6 w/
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
2
AutoCAD SHX Text
8
AutoCAD SHX Text
6 w/
AutoCAD SHX Text
8
AutoCAD SHX Text
BUNK BED
AutoCAD SHX Text
CUBBIES
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
6 w/
AutoCAD SHX Text
8
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
1 T.
AutoCAD SHX Text
7 3/4
AutoCAD SHX Text
2
AutoCAD SHX Text
10/17/17 UPDATE PER CLIENT
AutoCAD SHX Text
HEADER TO ALIGN W/ WINDOW HEADER
AutoCAD SHX Text
NOTE PROVIDE SHOP DRAWINGS FOR CABINETRY TO ARCHITECT
AutoCAD SHX Text
ATTIC ACCESS
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
WINDOW CASING TO BE PADDED OUT PER CAVALIER STANDARDS
AutoCAD SHX Text
A2.01
AutoCAD SHX Text
2
AutoCAD SHX Text
10/17/17 UPDATE PER CLIENT
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
1X4 CASING W/ " CAP 34" CAP ALIGN BOTTOM W/ TOP OF DOOR
AutoCAD SHX Text
1X8 BASE BOARD
AutoCAD SHX Text
CABINET TO ALIGN WITH TOP OF DOOR USE SAME CASING
AutoCAD SHX Text
1X4 VERTICAL SHIP LAP WOOD
AutoCAD SHX Text
1X4 CASING W CAP 34 CAP ALIGN W TOP OF DOOR
AutoCAD SHX Text
1X10 HORIZONTAL SHIP LAP BOARDS
AutoCAD SHX Text
INTERIOR WINDOW CASING W 2" BED MOULD & 1X CAP
AutoCAD SHX Text
A3.01
AutoCAD SHX Text
2
AutoCAD SHX Text
10/17/17 UPDATE PER CLIENT
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
TRUE "X12 SKIRT BOARD54"X12 SKIRT BOARDW/ " QUARTER ROUND 34" QUARTER ROUND AND 1X CAP
AutoCAD SHX Text
BRICK VENEER 8" CMU FOUNDATION WALL, TYP.
AutoCAD SHX Text
FOUNDATION DRAIN, TYP.
AutoCAD SHX Text
MIRITEC TRIM W/HARDI PANEL
AutoCAD SHX Text
PILASTER
AutoCAD SHX Text
1X P.T. TRIM W/ 3/4" QUARTER ROUND
AutoCAD SHX Text
TRUE " X 6" P.T. TRIM 54" X 6" P.T. TRIM
AutoCAD SHX Text
1X CEMENTIOUS SOFFIT FOR 1 HR FIRE RATING
AutoCAD SHX Text
1X4 FASCIA
AutoCAD SHX Text
5" CROWN MOULD
AutoCAD SHX Text
SIMPSON H2.5A HURRICANE CLIP @ EACH RAFTER, TYP.
AutoCAD SHX Text
CONTINUOUS RIGID DRIP FLASHING, TYP.
AutoCAD SHX Text
TYPICAL ROOF CONSTRUCTION
AutoCAD SHX Text
#30 FELT
AutoCAD SHX Text
ICE & WATER SHIELDSTARTER STRIP
AutoCAD SHX Text
TRUE " X 2 CAP W/" 54" X 2 CAP W/" 12" QUARTER ROUND
AutoCAD SHX Text
TOP OF SUBFLOOR
AutoCAD SHX Text
0'-0"
AutoCAD SHX Text
TOP OF PLATE
AutoCAD SHX Text
TOP OF FOOTING
AutoCAD SHX Text
-4-5 3/4"
AutoCAD SHX Text
BOT, OF FOOTING
AutoCAD SHX Text
-5'-5 3/4"
AutoCAD SHX Text
@ RAFTER
AutoCAD SHX Text
TOP OF FDN. PLATE
AutoCAD SHX Text
-1'-0"
AutoCAD SHX Text
BRICK VENEER 8" CMU FOUNDATION WALL, TYP.
AutoCAD SHX Text
FOUNDATION DRAIN, TYP.
AutoCAD SHX Text
TRUE "X12 SKIRT BOARD54"X12 SKIRT BOARDW/ " QUARTER ROUND 34" QUARTER ROUND AND 1X CAP
AutoCAD SHX Text
TYP. WALL ASSEMBLY:HARDIE CLAPBOARD SIDING W/4" EXPOSURE, ON WEATHER BARRIER, ON EXTERIOR GRADE PLYWOOD SHEATHING, ON 2X6 FRAMING @ 16" O.C., w/ WALL INSULATION PER LOCAL CODES, TYP.
AutoCAD SHX Text
TOP OF PLATE
AutoCAD SHX Text
2X10 P.T. TRIM
AutoCAD SHX Text
2X P.T. TRIM
AutoCAD SHX Text
1X12 CEMENTIOUS BOARD FOR 1 HR FIRE RATING
AutoCAD SHX Text
1X6 FASCIA
AutoCAD SHX Text
5" CROWNMOULD
AutoCAD SHX Text
SIMPSON H2.5A HURRICANE CLIP @EACH RAFTER, TYP.
AutoCAD SHX Text
CONTINUOUS RIGID DRIP FLASHING, TYP.
AutoCAD SHX Text
TYPICAL ROOF CONSTRUCTION
AutoCAD SHX Text
1 " BED MOULD 12" BED MOULD
AutoCAD SHX Text
P.T. CAP
AutoCAD SHX Text
SPRAY FOAM INSULATION NO VENTING REQ.
AutoCAD SHX Text
NOTE:FIRST FLOOR FINISH FLOOR HEIGHT TO BE A MIN. 3'-0" ABOVE FINISH GRADE
AutoCAD SHX Text
NOTE:ALL EXTERIOR WINDOW TRIM PER CAVALIER STANDARDS TRIM TO BE 2 LAYERS OF TRIM- 54 TRIM- COORDINATE w ARCHITECT IF DISCREPANCIES
AutoCAD SHX Text
NOTE:R-VALUES FOR ALL INSULATION MIN TO BE AS FOLLOWS:CRAWL R19R19WALLS R19R19ATTIC/CEILING R38R38SOUND R11R11
AutoCAD SHX Text
4
AutoCAD SHX Text
12
AutoCAD SHX Text
8
AutoCAD SHX Text
12
AutoCAD SHX Text
2
AutoCAD SHX Text
12
AutoCAD SHX Text
A3.02
AutoCAD SHX Text
(2) 2x12 BEAM2x12 BEAM
AutoCAD SHX Text
2x12 FLOOR JOIST @ 16" o.c. CANTILEVERED
AutoCAD SHX Text
1
AutoCAD SHX Text
6/15/17 UPDATE PER CITY
AutoCAD SHX Text
COMMENTS
AutoCAD SHX Text
1
AutoCAD SHX Text
1
SOMMERDESIGNSTUDIOS
ARCHITCTURE ANDPLACE-MAKING
678 357-5057Norfolk, Virginia 235184500 Pretty Lake Ave.
It is the responsibility of the contractor to perform thefollowing before beginning any construction:
1. Contractor or builder must verify all dimensions priorto any construction.2. Contractor or builder must comply with all localbuilding codes and ordinances in the area where thisproject is to be constructed.3. Contractor or builder must verify the existing loadbearing capacity of the soil at the construction site. Loadbearing capacity of the soil at the construction site mustmeet the minimum acceptable bearing capacity asindicated in the construction documents.
NOTE: ALL SMOKE DETECTORS TO BE INTERCONNECTED AND MAIN POWER FROM BUILDING WIRING W/ BATTERY BACKUP
AutoCAD SHX Text
SMOKE DETECTOR
AutoCAD SHX Text
CM
AutoCAD SHX Text
CARBON MONOXIDE DETECTOR
AutoCAD SHX Text
FE
AutoCAD SHX Text
FIRE EXTINGUISHER
AutoCAD SHX Text
FE
AutoCAD SHX Text
SD
AutoCAD SHX Text
CM
AutoCAD SHX Text
LEGEND
AutoCAD SHX Text
DUPLEX OUTLET
AutoCAD SHX Text
TV
AutoCAD SHX Text
SPLIT-WIRED OUTLET
AutoCAD SHX Text
ART LIGHT OUTLET
AutoCAD SHX Text
FLOOR OUTLET
AutoCAD SHX Text
CABLE T.V. JACK
AutoCAD SHX Text
220 V. OUTLET
AutoCAD SHX Text
WEATHER-PROOF OUTLET
AutoCAD SHX Text
GROUND FAULT CIRCUIT INTERUPTER
AutoCAD SHX Text
CH
AutoCAD SHX Text
PB
AutoCAD SHX Text
SD
AutoCAD SHX Text
TELEPHONE JACK
AutoCAD SHX Text
DOOR CHIME
AutoCAD SHX Text
RECESSED FIXTURE
AutoCAD SHX Text
CEILING FIXTURE
AutoCAD SHX Text
SMOKE DETECTOR
AutoCAD SHX Text
PUSH BUTTON
AutoCAD SHX Text
WALL FIXTURE
AutoCAD SHX Text
FLOOR DATA LINE JACK
AutoCAD SHX Text
DATA LINE JACK
AutoCAD SHX Text
FLOOR TELEPHONE JACK
AutoCAD SHX Text
UNDER-COUNTER FIXTURE
AutoCAD SHX Text
THREE-WAY SWITCH
AutoCAD SHX Text
DIMMER SWITCH
AutoCAD SHX Text
AUTOMATIC DOOR SWITCH
AutoCAD SHX Text
FOUR-WAY SWITCH
AutoCAD SHX Text
CEILING FAN
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
D
AutoCAD SHX Text
DIM
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
S
AutoCAD SHX Text
RECESSED DIRECTIONAL FIXTURE
AutoCAD SHX Text
DECORATIVE STRIP FIXTURE
AutoCAD SHX Text
RECESSED WATERPROOF FIXTURE
AutoCAD SHX Text
JUNCTION BOX
AutoCAD SHX Text
EXHAUST FAN W/ LIGHT
AutoCAD SHX Text
FLUORESCENT FIXTURE
AutoCAD SHX Text
EXHAUST FAN
AutoCAD SHX Text
SWITCH
AutoCAD SHX Text
J
AutoCAD SHX Text
S
AutoCAD SHX Text
WP
AutoCAD SHX Text
GFCI
AutoCAD SHX Text
DRAWINGS FOR FIXTURE TYPES AND LOCATIONS.
AutoCAD SHX Text
HERE ARE PRESENT ON THE DRAWINGS, SEE
AutoCAD SHX Text
NOTE: NOT ALL ELECTRICAL FIXTURES SHOWN
AutoCAD SHX Text
ELECTRICAL NOTESPROVIDE A COMPLETE ELECTRICAL WIRING SYSTEM THAT MEETS ALL CURRENT CODES AND INCLUDES ALL EQUIPMENT, KITCHEN AND LAUNDRY APPLIANCES, HVAC EQUIPMENT.COORDINATE ELECTRICAL REQUIREMENTS WITH ALL SUBCONTRACTORS (I.E. HVAC, P.UMBING, COMMUNICATIONS) AND PROVIDE REQUIRED WIRING.USE COPPER WIRING ONLY FOR ALL CONDUCTORS, EXCEPTION: ALUMINUM CONDUCTORS MAY BE USED FOR #6 AND LARGER SIZES.PROVIDE ALL NECESSARY WIRING FOR LANDSCAPE LIGHTING INCLUDING DRIVEWAYS AND POST LANTERNS, AS REQUESTED BY OWNERALL LIGHT SWITCHES SHALL BE ON DIMMERS EXCEPT JAMB SWITCHES AND FLUORESCENT LIGHT SWITCHES.SMOKE ALARMS/CO2 DETECTORS SHALL BE HARDWIRED WITH BATTERY BACKUP, LOCATED CENTERED OVER DOORS. ALARMS SHALL BE INTERCONNECTED WITH EACH OTHER& INSTALLED PER IRC CODES R313ALL LOCATIONS OF ELECTRICAL OUTLETS, LIGHTS TV CABLE, TELEPHONES, THERMOSTATS, ETC. SHALL BE CONFIRMED BY THE OWNER PRIOR TO ROUGH-INPROVIDE POWER TO DOCK FOR BOAT LIFT, MIN 50 AMPS OR AS REQUIRED BY ACTUAL EQUIPMENT.OWNER’S CONSULTANT WILL PROVIDE + INSTALL SECURITY/AUDO/VIEO SYSTEM. GC SHALL COORDINATE ALL S CONSULTANT WILL PROVIDE + INSTALL SECURITY/AUDO/VIEO SYSTEM. GC SHALL COORDINATE ALL TRADES WITH THIS WORK.PROVIDE CRAWL SPACE LIGHTING AND OUTLETS AT ALL CRAWL ACCESS PANELS.