TEST 7- QUESTION EXCERPT

Name: EFRAIN JOSÈ LONDOÑO ZAPATADATE: 09/09/2015GROUP: 809071

1. ALWAYS EXAMINE THE TOOL FOR DAMAGES BEFORE USE.R: TRUE

IT IS OK TO WEAR LOOSE CLOTHING, DANGLING OBJECTS AND JEWELLERY USING HAND TOOL. R: FALSE

KEEP CORDS AND HOSES AWAY FROM HEAT, OIL AND SHARP EDGES. R: TRUE

USE ONLY TOOLS AND EQUIPMENT IN GOOD CONDITION. R: TRUE

IT IS OK TO MAKE ADJUSTMENTS OR CLEAR A JAM WHILE THE POWER TOOL IS RUNNING. R: FALSE

IF ANY TOOL BREAKS OR MALFUNCTIONS, REPORT IT TO YOUR SUPERVISOR IMMEDIATELYR: TRUE

BEFORE CONNECTING TO A POWER SOURCE, MAKE SURE THE POWER IS ON. R: FALSE

SAFETY GLASSES SHALL ALWAYS BE WORN WHENEVER YOU ARE USING POWER HAND TOOL. R: TRUE

THERE ARE SEVERAL TYPES OF POWER TOOLS, INCLUDING ELECTRIC, PNEUMATIC, HYDRAULICR: FALSE

NEVER USE ELECTRIC TOOLS IN WET CONDITIONS.R: TRUE

WHEN NOT IN USE, POWER TOOLS SHOULD BE DISCONNECTED. R: TRUE

KEEP SAFE DISTANCE BETWEEN YOUR HANDS AND ALL MOVING PARTS OF THE POWER TOOLR: TRUE

DON’T LEAVE A POWER TOOL UNATTENDED WHILE IT IS RUNNING.R: TRUE

IT IS OK TO STARTLE SOMEONE WHO IS USING A POWER TOOLR: FALSE

USE SAFETY GUARDS EXACTLY AS THEY ARE SUPPOSED TO BE USEDR: TRUE

WHEN TIGHTENING A NUT WITH AN ADJUSTABLE WRENCH, ALWAYS PULL THE WRENCH TOWARD YOU; NEVER PUSH THE WRENCH AWAY FROM YOUR: TRUE

PLASTIC COVERED HANDLES ON WIRE-CUTTING PLIERS MAY BE USED TO CUT LOW-VOLTAGE LIVE ELECTRICAL WIRER:TRUE

SCREWDRIVERS MAY BE USED FOR PURPOSES OTHER THAN DRIVING OR REMOVING SCREWS, FOR EXAMPLE AS A CHISELR: FALSE

WHEN SELECTING A STANDARD SCREWDRIVER BE CERTAIN THAT THE TIP IS ALMOST AS THICK AND AS WIDE AS THE SLOT OF THE HEAD OF A SCREWR:TRUE

WHEN USING A HACKSAW, SAFETY GLASSES MUST BE WORN. R:TRUE

WHEN YOU ARE FINISHED USING A HACKSAW, TENSION SHOULD BE EASEDR: TRUE

THE END.