Post on 09-Mar-2020
Argentina • Australia • Austria • Belarus • Belgium • Botswana • Brazil • Bulgaria • Canada • Chile • China • Colombia • Croatia • Cyprus Czech Republic • Denmark • Egypt • Emirates • Finland • France • Germany • Greece • Hungary • India • Indonesia • Ireland Israel • Italy • Japan • Korea • Luxemburg • Kyrgyzstan • Malaysia • Mexico • Mozambique • Namibia• The NetherlandsNew Zealand • Norway • Pakistan • Peru• Poland • Portugal • Romania • Russia • Serbia • Singapore • Slovakia • Slovenia • South AfricaSpain • Sweden • Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • USA • Venezuela • Vietnam • Zimbabwe
SafeLOGIC
mul
tiAC
OPOS
mul
tiAC
OPOS
mul
tiAC
OPOS
mul
tiAC
OPOS
mul
ti AC
OPOS
mul
ti AC
OPOS
mul
ti AC
OPOS
mul
ti AC
OPOS
Auto
mat
ion
PC
X67X67 X20
X20
Power Panel
ACOPOSmulti
APC620
Control system, visualization and operation
Visualization and operation
Remote I/O systemsMotion control
Motion control
Remote I/O systems
Ethernet TCP/IP Host/line communication
X67X67X20
Remote I/O systems Motion control
ACOPOSinverter X64
ACOPOSinverter P84
PO
WE
RLI
NK
Perfection in Automationwww.br-automation.com
ACOPOSinverter S44
System OverviewFrequency Inverters
MM
-E00
937.
769
© 2
009
by B
&R. A
ll rig
hts
rese
rved
. Al
l tra
dem
arks
pre
sent
ed a
re p
rope
rty o
f the
ir re
spec
tive
com
pany
. We
rese
rve
the
right
to m
ake
tech
nica
l cha
nges
.
155 offices in 60 countries - www.br-automation.com/contact
CORPORATE HEADQUARTERS
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. B&R Strasse 15142 Eggelsberg AustriaTel.: +43 (0) 77 48 / 65 86 - 0 Fax: +43 (0) 77 48 / 65 86 - 26info@br-automation.comwww.br-automation.com
ACOPOSinverter S44
8I44
S10
0018
.000
-1
8I44
S10
0037
.000
-1
8I44
S10
0075
.000
-1
8I44
S20
0018
.000
-1
8I44
S20
0037
.000
-1
8I44
S20
0055
.000
-1
8I44
S20
0075
.000
-1
8I44
S20
0150
.000
-1
8I44
S20
0220
.000
-1
8I44
T200
018.
000-
1
8I44
T200
037.
000-
1
8I44
T200
075.
000-
1
8I44
T200
150.
000-
1
8I44
T200
220.
000-
1
8I44
T200
300.
000-
1
8I44
T200
400.
000-
1
FeaturesFully integrated in Automation Studio
Integrated RS485 interface
ApplicationsMaterial handling (small conveyors), packaging (small labelling machines, small bagging machines), kneading machines,
mixers, car wash, pumps, fans, miscellaneous applications (grinders, saws, drills, mills)
Power supplySingle phase 100 -15%
to 120 +10% VAC 50 to 60 Hz ±5%
Single phase 200 -15% to 240 +10% VAC50 to 60 Hz ±5%
Three phase 200 -15% to 240 +10% VAC 50 to 60 Hz ±5%"
Integrated EMC filter IEC/EN61800-3 Cat. C1
- - - x x x x x x - - - - - - -
Power rating [kW] 0.18 0.37 0.75 0.18 0.37 0.55 0.75 1.5 2.2 0.18 0.37 0.75 1.5 2.2 3 4
Power rating [HP] 0.25 0.5 1 0.25 0.5 0.75 1 2 3 0.25 0.5 1 2 3 - 5
Nominal current [A] at nominal swit-ching frequency
1.4 2.4 4.2 1.4 2.4 3.5 4.2 7.5 10 1.4 2.4 4.2 7.5 10 12.2 16.7
Maximum transi-ent current [A]
150% of nominal drive current for 60 s
2.1 3.6 6.3 2.1 3.6 5.3 6.3 11.2 15 2.1 3.6 6.3 11.2 15 18.3 25
Output frequency 0.5 to 400 Hz
Switching fre-quency
2 to 16 kHz4 kHz nominal
Transient over-torque
150 to 170% of nominal motor torque
Braking torque - without braking resistor
up to 70% of nominal motor torque
Motor control Voltage/frequency ratio, sensorless flux vector control, quadratic ratio for pumps and fans
Operational conditions
Ambient temperature: -10°C to +40°C / +50°C, depending on drive rating (up to +60°C with derating) Relative humidity: 5 to 95%, non-condensing
Dimensions (width x height x depth) [mm]
72142102
72130121
105130156
72142102
72130121
72130131
105130156
72142102
72130121
105130131
140170141
Weight [kg] 0.7 0.8 1.3 0.7 0.8 0.8 1.4 0.7 0.8 1.2 2
8I64
S20
0018
.000
-1
8I64
S20
0037
.000
-1
8I64
S20
0055
.000
-1
8I64
S20
0075
.000
-1
8I64
S20
0110
.000
-1
8I64
S20
0150
.000
-1
8I64
S20
0220
.000
-1
8I64
T200
018.
000-
1
8I64
T200
037.
000-
1
8I64
T200
055.
000-
1
8I64
T200
075.
000-
1
8I64
T200
110.
000-
1
8I64
T200
150.
000-
1
8I64
T200
220.
000-
1
8I64
T200
300.
000-
1
8I64
T200
400.
000-
1
8I64
T200
550.
000-
1
8I64
T200
750.
000-
1
8I64
T201
100.
000-
1
8I64
T201
500.
000-
1
8I64
T400
037.
000-
1
8I64
T400
055.
000-
1
8I64
T400
075.
000-
1
8I64
T400
110.
000-
1
8I64
T400
150.
000-
1
8I64
T400
220.
000-
1
8I64
T400
300.
000-
1
8I64
T400
400.
000-
1
8I64
T400
550.
000-
1
8I64
T400
750.
000-
1
8I64
T401
100.
000-
1
8I64
T401
500.
000-
1
FeaturesFully integrated in Automation Studio, Integrated X2X Link
Integrated braking chopper
Applications Material handling (conveyors, palletizers), packing and packaging machines, strapping machines, washing machines, milling machines, kneading machines, mixers, textile machines, pumps, fans, compressors
Power supplySingle phase 200 -15% to 240 +10% VAC
50 to 60 Hz ±5%Three phase 200 -15% to 240 +10% VAC
50 to 60 Hz +/-5%Three phase 380 -15% to 500 +10% VAC
50 to 60 Hz ±5%
Integrated EMC filter IEC/EN61800-3category C2
x x x x x x - - - - - - - - - - - - - - x x x x x x x x - - - -
Integrated EMC filter IEC/EN61800-3category C3
- - - - - - x - - - - - - - - - - - - - - - - - - - - - x x x x
Power rating [kW] 0.18 0.37 0.55 0.75 1.1 1.5 2.2 0.18 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15
Power rating [HP] 0.25 0.5 0.75 1 1.5 2 3 0.25 0.5 0.75 1 1.5 2 3 - 5 7.5 10 15 20 0.5 0.75 1 1.5 2 3 - 5 7.5 10 15 20
Nominal current [A] at nominal switching frequency
1.5 3.3 3.7 4.8 6.9 8 11 1.5 3.3 3.7 4.8 6.9 8 11 13.7 17.5 27.5 33 54 66 1.5 1.9 2.3 3 4.1 5.5 7.1 9.5 14.3 17 27.7 33
Maximum transient current [A]
150% of the nominal drive current for 60 s (typical value)
2.3 5 5.6 7.2 10.4 12 16.5 2.3 5 5.6 7.2 10.4 12 16.5 20.6 26.3 41.3 49.5 81 99 2.3 2.9 3.5 4.5 6.2 8.3 10.7 14.3 21.5 25.5 41.6 49.5
Output frequency 0.5 to 500 Hz
Switching frequency2 to 16 kHz
4 kHz nominal
Transient overtorque 170 to 200% of nominal motor torque (typical value)
Braking torque - wi-thout braking resistor % of nominal motor torque (typical value)
150% 100% 50% 30% 100% 50% 30% 100% 50% 30%
Braking torque - with braking resistor
100% of nominal motor torque continiously and up to 150% for 60 s
Motor control Sensorless flux vector control, specific ratio for pumps and fans, energy saving, constant torque voltage/frequency ratio
Operational condi-tions
Ambient temperature: -10°C to +50°C (up to +60°C with derating)Relative humidity: 5 to 95%, non-condensing
Dimensions (width x height x depth) [mm]
72145140
72145145
107143150
142184150
72145120
72145130
105143130
107143150
142184150
180232170
245329.5190
107143150
142184150
180232170
245329.5190
Weight [kg] 1.5 1.8 3.1 1.3 1.7 2.9 6.4 10.5 1.8 3.1 6.5 11
8I84
T200
037.
010-
1
8I84
T200
075.
010-
1
8I84
T200
150.
010-
1
8I84
T200
220.
010-
1
8I84
T200
300.
010-
1
8I84
T200
400.
010-
1
8I84
T200
550.
010-
1
8I84
T200
750.
010-
1
8I84
T201
100.
010-
1
8I84
T201
500.
010-
1
8I84
T201
850.
010-
1
8I84
T202
200.
010-
1
8I84
T203
000.
010-
1
8I84
T203
700.
010-
1
8I84
T204
500.
010-
1
8I84
T400
075.
010-
1
8I84
T400
150.
010-
1
8I84
T400
220.
010-
1
8I84
T400
300.
010-
1
8I84
T400
400.
010-
1
8I84
T400
550.
010-
1
8I84
T400
750.
010-
1
8I84
T401
100.
010-
1
8I84
T401
500.
010-
1
8I84
T401
850.
010-
1
8I84
T402
200.
010-
1
8I84
T403
000.
010-
1
8I84
T403
700.
010-
1
8I84
T404
500.
010-
1
8I84
T405
500.
010-
1
8I84
T407
500.
010-
1
8I84
T409
000.
010-
1
8I84
T411
000.
010-
1
8I84
T413
200.
010-
1
8I84
T416
000.
010-
1
8I84
T420
000.
010-
1
8I84
T425
000.
010-
1
8I84
T428
000.
010-
1
8I84
T431
500.
010-
1
8I84
T440
000.
010-
1
8I84
T450
000.
010-
1
FeaturesFully integrated in Automation Studio, Integrated POWERLINK, Integrated “Safe Torque Off“ according IEC/EN61508-1 SIL2 and EN954-1 category 3, External and integrated 24VDC power supply, Common DC bus connection
Integrated braking chopper Braking chopper as option
Applications Material handling (conveyors, palletizers), packing and packaging machines, strapping machines, washing machines, milling machines, kneading machines, mixers, textile machines, pumps, fans, compressors
Power supplyThree phase 200 -15% to 240 +10% VAC
50 to 60 Hz +/-5%Three phase 380 -15% to 480 +10% VAC
50 to 60 Hz ±5%
Integrated EMC filter IEC/EN61800-3category C2
x x x x - - - - - - - - - - - x x x x x - - - - - - - - - - - - - - - - - - - - -
Integrated EMC filter IEC/EN61800-3category C3
- - - - x x x x - - - - - - - - - - - - x x x x x x x x x x x x x x x x x x x x x
Power rating [kW] 0.37 0.75 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 0.75 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 250 280 315 400 500
Power rating [HP] 0.5 1 2 3 - 5 7.5 10 15 20 25 30 40 50 60 1 2 3 - 5 7.5 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 400 450 500 600 700
Nominal current [A] at nominal switching frequency
3 4.8 8 11 13.7 17.5 27.5 33 54 66 75 88 120 144 176 2.3 4.1 5.8 7.8 10.5 14.3 17.6 27.7 33 41 48 66 79 94 116 160 179 215 259 314 387 481 550 616 759 941
Maximum transient current [A]
150% of the nominal drive current for 60 s (typical value)
4.5 7.2 12 16.5 20.6 26.3 41.3 49.5 81 99 112 132 180 216 264 3.5 6.2 8.7 11.7 15.8 21.5 26.4 41.6 49.5 61.5 72 99 118 141 174 240 269 323 388 471 580 721 825 924 1138 1411
165% of the nominal drive current for 2 s (typical value)
4.9 7.9 13.2 18.1 22.6 28.8 45.3 54.5 89.1 109 124 145 198 238 290 3.8 6.8 9.6 12.9 17.3 23.6 29 45.7 54.5 67.7 79.2 109 130 155 191 264 295 355 427 518 638 793 907 1016 1252 1552
Output frequency 1 to 1600 Hz1 to 500 Hz
1 to 1600 Hz 1 to 500 Hz
Switching frequency1 to 16 kHz
4 kHz nominal1 to 16 kHz
2.5 kHz nominal1 to 16 kHz
4 kHz nominal1 to 16 kHz
2.5 kHz nominal2.5 to 8 kHz
2.5 kHz nominal
Transient overtorque170% of nominal motor torque (typical value at ±10%) for 60 s220% of nominal motor torque (typical value at ±10%) for 2 s
Braking torque - wi-thout braking resistor
30% of nominal motor torque (typical value)
Braking torque - with braking resistor
Up to 150% of the rated motor torque
Motor controlAsynchronous motor: Flux vector control with sensor, sensorless flux vector control, voltage/frequency ratio (2 or 5 points), ENA (Energy Adaption) system
Synchronous motor: Vector control without speed feedback
Operational condi-tions
Ambient temperature: -10°C to +50°C (up to +60°C with derating and with control card fan kit)Relative humidity: 5 to 95%, non-condensing
Dimensions (width x height x depth) [mm]
130 230 175
155 260 187
175 295 187
210 295 213
230 400 213
240 420 236
320550266
130230175
155260187
175 295 187
210 295 213
230 400 213
240 420 236
240 550 266
320 630 290
320 920 377
360 1022 377
340 1190 377
440 1190 377
595 1190 377
890 1390 377
890 1390 377
1120 1390 377
Weight [kg] 3 4 5.5 7 16 30 37 3 4 5.5 7 16 30 37 44 60 74 80 110 140 215 225 300
ACOPOSinverter X64 ACOPOSinverter P84