Post on 30-May-2018
8/14/2019 Submitting the Bill of Material Loop Report_SPD
1/25
System Process DocumentSubmitting the Bill of Material Loop Report
Department
Responsibility/Role
File Name 27762380.docRevision
Document Generation Date 18/01/2010 09:40:00
Date Modified 1/18/2010 09:40:00 AM
Last Changed by
Status
Submitting the Bill of Material Loop Report
Trigger:
Concept
You can use the Bill of Material Loop Report to check for loops in a bill of material. Bill loops
occur when you assign an assembly as a component to itself somewhere in the multilevel
structure. You must fix loops before you run an accurate MRP or define a discrete job or
repetitive schedule for the assembly.
If no loop exists, No Data Found is printed on the report.
In this topic, you will submit a bill of material loop report.
Required Field(s) Comments
Output - Result(s) Comments
Additional Information
Last changed on: 1/18/2010 09:40:00 AM Page 1
8/14/2019 Submitting the Bill of Material Loop Report_SPD
2/25
System Process DocumentSubmitting the Bill of Material Loop Report
Procedure
Step Action
1. Begin by navigating to the Bill of Material Reports page.
Click the vertical scrollbar.
Page 2 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
3/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
2. Click the Manufacturing and Distribution Manager link.
Last changed on: 1/18/2010 09:40:00 AM Page 3
8/14/2019 Submitting the Bill of Material Loop Report_SPD
4/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
3. Click the vertical scrollbar.
Step Action
4. Click the Bills link.
Page 4 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
5/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
5. Use the Organizations page to select your organization.
Last changed on: 1/18/2010 09:40:00 AM Page 5
8/14/2019 Submitting the Bill of Material Loop Report_SPD
6/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
6. Click the M1 Seattle Manufacturing list item.
Step Action
7. Click the OKbutton.
orPress [Alt+O].
Page 6 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
7/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
8. Use the Submit a New Request page to enter either a single request or a set.
Last changed on: 1/18/2010 09:40:00 AM Page 7
8/14/2019 Submitting the Bill of Material Loop Report_SPD
8/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
9. Click the OKbutton.
orPress [Alt+O].
Step Action10. Use the Bill of Material Reports page to enter the name of the report you want to
run.
Page 8 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
9/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
11. Click in the Name field.
Last changed on: 1/18/2010 09:40:00 AM Page 9
8/14/2019 Submitting the Bill of Material Loop Report_SPD
10/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
12. Enter the desired information into the Name field. Enter "Bill of Material Loop
Report GUI".
Step Action
13. Click in the Parameters field.
Page 10 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
11/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
14. Use the Parameters page to enter the values for the parameters.
Last changed on: 1/18/2010 09:40:00 AM Page 11
8/14/2019 Submitting the Bill of Material Loop Report_SPD
12/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
15. Click in the Item field.
Step Action
16. Use the System Items page to enter the name of the item or a range of items.
Page 12 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
13/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
17. Click in the Item field.
Last changed on: 1/18/2010 09:40:00 AM Page 13
8/14/2019 Submitting the Bill of Material Loop Report_SPD
14/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
18. Enter the desired information into the Item field. Enter "RT1000".
Step Action
19. Click the OKbutton.
orPress [Alt+O].
Page 14 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
15/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
20. Click the OKbutton.
orPress [Alt+O].
Last changed on: 1/18/2010 09:40:00 AM Page 15
8/14/2019 Submitting the Bill of Material Loop Report_SPD
16/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
21. Click the Submit button.
orPress [Alt+m].
Step Action
22. Use the Decision page to note the request ID.
Page 16 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
17/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
23. Click the No button.
orPress [Alt+N].
Last changed on: 1/18/2010 09:40:00 AM Page 17
8/14/2019 Submitting the Bill of Material Loop Report_SPD
18/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
24. Use the Navigator page to navigate to the Find Requests page.
Step Action
25. Click the View menu.
orPress [Alt+V].
Page 18 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
19/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
26. Click the Requests menu.
orPress [R].
Last changed on: 1/18/2010 09:40:00 AM Page 19
8/14/2019 Submitting the Bill of Material Loop Report_SPD
20/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
27. Use the Find Requests page to enter the request ID.
Step Action
28. Click the Specific Requests option.
Page 20 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
21/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
29. Click in the Request ID field.
Last changed on: 1/18/2010 09:40:00 AM Page 21
8/14/2019 Submitting the Bill of Material Loop Report_SPD
22/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
30. Enter the desired information into the Request ID field. Enter "5597442".
Step Action
31. Click the Find button.
orPress [Alt+i].
Page 22 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
23/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
32. Use the Requests page to view the status of the submitted report.
Last changed on: 1/18/2010 09:40:00 AM Page 23
8/14/2019 Submitting the Bill of Material Loop Report_SPD
24/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
33. Click the View Output button.
orPress [Alt+p].
Step Action34. You can view the detailed loop report, which checks for loops in a bill of material.
Bill loops occur when you assign an assembly as a component to itself somewhere
in the multilevel structure.
Page 24 Last changed on: 1/18/2010 09:40:00 AM
8/14/2019 Submitting the Bill of Material Loop Report_SPD
25/25
System Process DocumentSubmitting the Bill of Material Loop Report
Step Action
35. You have completed the Submitting the Bill of Material Loop Report procedure.
End of Procedure.
1/18/2010 09 40 00 AM P 25