Structural Solutions for TimberSeminar 6th August 2019Barry BruntonSth. Aust Tech TeamBarry.Brunton@woodsolutions.com.au0426 56 7771

Thanks to all for attending!

• In case of Emergency• Planned Fire Alarms?

• Gents & Ladies facilities

• Thanks to Speakers – investing time & effort• Thanks to Engineers Australia

Welcome!

09.00am Seminar Registration – Engineers Australia, Adelaide09:20am Seminar Welcome & IntroductionBarry Brunton, WoodSolutions09:30am Design of Massive Timber ConnectionsPresented by Giovanni Scollo – Rothoblaas10:15am Design with a DifferencePresented by Afzal Laphir – Meyer Timber

11:00 TO 11:20 MORNING TEA AND NETWORKING

11:20am DFMA - CLTPresented by Nick Hewson/Jeremy Church - XLam12:05pm Concept Design using TimberTech SoftwarePresented by Paolo Lavisci & Adam Jones - WoodSolutions12:50pm Mass Engineered Timber – Where have we come from? Where are we now? What is next?Presented by Stephen Dayus – Wesbeam13:45 Close

Programme

WoodSolutions™: Who we are

• inspiration

• information & resources

• CPD.

An Australian industry

initiative, resourced by Forest

and Wood Products Australia

(FWPA) –

For architects, engineers,

designers and other building

professionals

Text headings in Calibri boldBody text in Calibri regular, body text in Calibri regular, Body text in Calibri regular, Body text in Calibri regular.

Text headings in Calibri boldBody text in Calibri regular, body text in Calibri regular, Body text in Calibri regular, Body text in Calibri regular.

Text frame One Line Style

Text headings in Calibri boldBody text in Calibri regular, body text in Calibri regular, Body text in Calibri regular, Body text in Calibri regular.

Text headings in Calibri boldBody text in Calibri regular, body text in Calibri regular, Body text in Calibri regular, Body text in Calibri regular.

Text frame One Line Style

Design Guide 46Options – Systems/Connections/Elements

Structural DesignTimberTech Software

ACRO-TIM Automated Calculation ROutines of mid-rise TIMber structures under combined wind and quake actions (VNA440-1718)

Midrise Structural Engineers Design Guide – In development

Analyse & Design- Massive Timber- Lightweight Timber- Connections- Outputs

- Reports- BOM/BOQ

The National Construction Code (NCC) is the regulatory framework for determining the minimum design and construction requirements for buildings in Australia.

NCC Volume OneBuilding Code of Australia 2019

for Class 2 to Class 9 Buildings is the document relevant to mid-rise

timber buildings

Previously restricted to Class 2,3 & 5

NCC Code Change 2019

New Timber ConstructionProvisions

The 2019 NCC, has been amended to permit, under the Deemed-to-Satisfy(DTS) provisions, the use of fire-protected timber construction systems in all classes of buildings

up to 25 metres in effective height (herein termed ‘mid-rise construction’).

NCC 2019 changes for Timber Construction

Lightweight Timber Framed Systems

Small section timber framing plus fire-rated

plasterboard lining

Timber-framed Systems

Massive timber – Cross Laminated Timber

Multiple layers of laminated timber cross at each laminate i.e. “Jumbo plywood”

Mass-timber

Massive Timber –Previous NCC 2016 Definition

Schedule 3 Definitions

Massive Timber –NCC 2019 Definition

Building Form – Class 2, 3, 9a and 9cMulti-residential, Hotel, Hospital and Aged care

Project: Stadthaus Building Architect: Waugh ThistletonLocation: London, UK

Multi-Res Apartments

6 – 8 Storeys

Lightweight Timber

+

Massive Timber

Multi-Res Apartments

1-6 Storeys

Lightweight Timber

Conventional framing upper walls closer stud

centres lower walls

Multi-Res Apartments

6 - 12 Storeys

Massive Timber

(CLT)

Wood – The Ultimate Renewable

The Ultimate Renewable• Recently launched a new

campaign• As a result of extensive

collaboration between FWPA, the industry and consumers

• The ad features Peter Maddison, presenter of ‘Grand Designs Australia’

• Timber is a renewal and sustainable resource

The Ultimate Renewable

And, on to the speakers!

Feedback & CPD