Post on 13-Sep-2015
Mittal Steel EuropeFlat Products - An Overview
Mittal Steel Europe Shaping the future of steel
Intro 5
Hot Rolled Krakow (Poland) 6 Ostrava (Czech Republic) 7 Galati (Romania) 8 Skopje (Macedonia) 9
Heavy Plate Batory (Poland) 10 Galati (Romania) 11
Cold Rolled Sosnowiec, Krakow (Poland) 12 Valcovny Plechnu Frydek-Mistek (Czech Republic) 13 Nova Hut - Valcovna za studena (Czech Republic) 14 Skopje (Macedonia) 15 Galati (Romania) 16
Hot Dip Galvanised Swietochlowice (Poland) 17 Skopje (Macedonia) 18 Galati (Romania) 19
Electro Galvanised Krakow (Poland) 20
Organic Coated Swietochlowice (Poland) 21 Skopje (Macedonia) 22
Sales Offices Europe 23
Flat Products - An Overview
Contents
Mittal Steel Europe Shaping the future of steel
Units (Europe) Hot RolledHot Rolled
Pickled & OiledHeavy Plate Cold Rolled
Hot Dip Galvanised
Electro Galvanised
Organic Coated
Poland Swietochlowice Poland Sosnowiec Poland Krakow Poland Batory Czech Republic Ostrava Czech Republic VPFM Czech Republic NH VZS Macedonia Skopje Romania Galati
Valid from 01/07/2006 Version MSE0906Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
From our units in Poland, Czech Republic, Romania and Macedonia, Mittal Steel Europe offers customers a wide range of flat products. Our product portfolio comprises hot rolled, cold rolled, hot dip galvanised, electro galvanised and organic coated products as well as heavy plates.
In this brochure you will find the offer overview of Mittal Steels European units. You will be served by our network of sales offices located throughout Europe. Our sales teams are always ready and available to meet your specific requirements.
Mittal Steel EuropeFlat products marketing team
Flat Products - An Overview
Intro
Shaping the future of steelMittal Steel Europe
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Dimension Range Description
EN 10111 DD11; DD12; DD13; DD14 * B Low carbon steel for cold bending
* after agreement
1.2 - Structural Steel
Standard Grade Dimension Range Description
EN 10025-2 S235JR; S235J0; S235J2; A Non-alloy structural steel
EN 10025-2 S275JR; S275J0; S275J2; S355JR; S355J0; S355J2; S355K2 A Non-alloy structural steel of higher quality
1. - Steel for Pressure Vessels and Boilers
Standard Grade Dimension Range Description
EN 10028-2 P235GH; P265GH Only sheet Heat-resistant pressure-vessel steel
EN 10207 P235S; P265S C Steel for simple pressure vessels
1.4 - Steel for Gas Containers
Standard Grade Dimension Range Description
EN 10120 P245NB; P265NB C Steel for welded gas cylinders
1. - Steel for Shipbuilding
Standard Grade Dimension Range Description
LRS* A; B; D; AH27S; DH27S; AH32; DH32 Only sheet Structural steel for shipbuilding
* Lloyds Register of Shipping
1. - Steel for Patterned Products
Standard Grade Dimension Range Description
DIN 59220 S235JR; S235JRG2 D Steel for checkered products
Flat Products - An Overview
Hot RolledKrakow (Poland)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.8 - 6.0 730 - 1500 680 - 780 max. 12 EN 10051
Trimmed Edges 1.8 - 6.0 730 - 1500 680 - 780 max. 12 EN 10051
Pickled 1.8 - 4.0 730 - 1500 610 max. 25 EN 10051
Slit 1.8 - 6.0 120 - 600 700 - 780 max. 12 EN 10051
Patterned - Checkered 3.0 - 6.0 1000 - 1250 680 - 780 max. 12 DIN 59220
- Surface
Execution
Unpickled
Pickled, Oiled or Unoiled
2.2 - Hot Rolled Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 1.8 - 12.0 * 730 - 1500 2000 - 6000 max. 5 EN 10051 / EN 10029
Pickled 1.8 - 2.5 730 - 1400 1400 - 4000 max. 5 EN 10051 / EN 10029
Patterned - Checkered 3.0 - 10.0 up to 12.0 * 1000 - 1500 2000 - 6000 max. 5 DIN 59220
* after agreement
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 1100 1200 100 1400 100
1.80 - 1.99
2.00 - 2.49
2.50 - 2.79
2.80 - 2.99
3.00 - 3.99
4.00 - 6.00
A B C D
- Surface
Execution
Unpickled
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Dimension Range Description
EN 10111 DD11- DD14 A Low carbon steel for cold bending
1.2 - Structural Steel
Standard Grade Dimension Range Description
EN 10025-2 S235JR - S235J2 A Non-alloy structural steel
EN 10025-2 S275JR - S355J2 B Non-alloy structural steel of higher quality
EN 10025-5 S235J0W - S355J0WP C Structural steel with improved corrosion resistance
1. - Micro-alloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10149-2 S315MC - S500MC E High yield strength steel for cold forming, thermomechanical rolled
1.4 - High Carbon Steel
Standard Grade Dimension Range Description
EN 10083 +A1 C35 - C60 D Quenched and tempered steel
EN 10132-4 C55S - C67S D Spring steel and other applications
1. - Steel for Pipes and Tubes
Standard Grade Dimension Range Description
EN 10208-2 L245NB - L485MB E Hot rolled coils for the manufacture of large-diameter pipes
API 5L Gr A - X70 E Hot rolled coils for the manufacture of large-diameter pipes
Flat Products - An Overview
Hot RolledOstrava (Czech Republic)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.5 - 15.0 980 - 1550 762 max. 33 EN 10051+A1
Trimmed Edges 1.5 - 8.0 960 - 1530 600 or 762 max. 33 EN 10051+A1
Slit 1.5 - 8.0 20 - 750 600 or 762 max. 16 EN 10051+A1
Patterned - Teardrop 3.0 - 10.0 (12.0*) 980 - 1550 762 max. * DIN 59220
* after agreement
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 1000 1100 1200 100 1400 100 10
1.50 - 1.79
1.80 - 1.99
2.00 - 2.24
2.25 - 2.49
2.50 - 2.99
3.00 - 3.99
4.00 - 6.00
6.00 - 13.0
13.0 - 15.0
A B C D E
Hot rolled strip of width from 740 up to 980 mm are produced and supplied in limited quantity and after agreement with the production plant.
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 1.5 - 15.0 600 - 1550 1000 - 12000 max. 5.0 EN 10051+A1
Patterned - Teardrop 3.0 - 10.0 (12.0*) 600 - 1550 1000 - 12000 max. 5.0 DIN 59220
* after agreement
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
7 Shaping the future of steelMittal Steel Europe
8 Shaping the future of steelMittal Steel Europe
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Description
EN 10111 DD11 - DD14 Low carbon steel for cold bending
1.2 - Structural Steel
Standard Grade Description
EN 10025 S235JR, J0, J2 - S355JR, J0, J2, K2 Non-alloy structural steel
EN 10155 S235J0W - S355J2G2W Structural steel with improved corrosion resistance
1. - Micro-alloyed Steel for Cold Forming
Standard Grade Description
EN 10113-2 S275N, S355N Weldable fine grained structural steel
EN 10149-3 S260NC - S355NC High strength steel for cold forming, normalised / normalised rolled
1.4 - Steel for Pipes and Tubes
Standard Grade Description
EN 10208-2 L245NB - L360NB Hot rolled coils for the manufacture of large-diameter pipes
API 5L Gr A, B, X42 - X70 Hot rolled coils for the manufacture of large-diameter pipes
1. - Steel for Pressure Vessels and Boilers
Standard Grade Description
EN 10028-2 P235GH - P355GH, 16Mo3 Heat-resistant pressure vessel steel
EN 10028-3 P275N, NH - P355N, NH Weldable fine grained steel for pressure equipment
1. - Steel for Gas Containers
Standard Grade Description
EN 10028-2 P245NB - P310NB Steel for welded gas cylinders
Flat Products - An Overview
Hot RolledGalati (Romania)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.5 - 12.0 1000 - 1500 760 - 850 12 - 24 EN 10051
Pickled 1.5 - 4.0 1000 - 1450 610 +/- 15 12 - 24 EN 10051
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 3.0 - 12.0 1000 - 1500 3000 - 6000 max. 10 EN 10051
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 1000 100 1100 110 1200 120 100 1400 140 100
1.50 - 1.79
1.80 - 1.99
2.00 - 2.29
2.30 - 2.49
2.50 - 2.99
3.00 - 12.0
- Surface
Execution
Unpickled
Pickled, Oiled or Unoiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
Tensile Strength Steel Type S235 Tensile Strength Steel Type S355
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Forming and Bending
Standard Grade Dimension Range Description
EN 10111 DD11 - DD13 A Low carbon steel for cold bending
1.2 - Structural Steel
Standard Grade Description
EN 10025 S235JR - S235J2G3 A Non-alloy structural steel
EN 10025 S275JR - S355J2G3 A Non-alloy structural steel of higher quality
1. - Steel for Pipes and Tubes
Standard Grade Description
API 5L Gr A - X46 A Hot rolled coils for the manufacture of large-diameter pipes
1.4 - Steel for Pressure Vessels and Boilers
Standard Grade Description
EN 10028-2 P235GH - P295GH A Heat-resistant pressure-vessel steel
1. - Steel for Shipbuilding
Standard Grade Description
ADS* A, B, D A Structural steel for shipbuilding
* Also LR, GL, CR, NV
Flat Products - An Overview
Hot RolledSkopje (Macedonia)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Mill Edges 1.8 - 12.0 800 - 1500 max. 762 max. 16 EN 10051
Pickled 1.8 - 5.5 800 - 1500 max. 762 max. 15 EN 10051
Patterned - Checkered 3.0 - 10.0 1000 - 1100 max. 762 max. 10 DIN 59220
Patterned - Teardrop 4.0 - 10.0 1000 - 1250 max. 762 max. 10 DIN 59220
2 - Dimensions
2.1 - Hot Rolled Coils
Width (mm)
Thickness (mm) 800 900 1000 1100 1200 100 1400 100
1.80 - 1.99
2.00 - 2.24
2.25 - 2.49
2.50 - 2.99
3.00 - 3.99
4.00 - 5.99
6.00 - 12.0
A
2.2 - Sheets
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Cut-to-length max. 12 800 - 1250 2000 - 12000 2 - 10 EN 10051, EN 10029
max. 10 800 - 1500 2000 - 12000 2 - 10 EN 10051, EN 10029
max. 5 800 - 1400 2000 - 8000 2 - 10 EN 10051, EN 10029
Pickled 1.8 - 5.5 800 - 1500 2000 - 8000 2 - 10 EN 10051, EN 10029
Patterned - Checkered 3.0 - 10.0 1000 - 1100 2000 - 8000 2 - 10 DIN 59220
Patterned - Teardrop 4.0 - 10.0 1000 - 1250 2000 - 8000 2 - 10 DIN 59220
- Surface
Execution
Unpickled
Pickled, Oiled or Unoiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
9 Shaping the future of steelMittal Steel Europe
1 - Steel Grades
1.1 - Structural Steel
Standard Grade Description
EN 10025-2 S235JR - S235J2 (+AR, +N) Non-alloy structural steel
EN 10025-2 S275JR - S275J2 (+AR, +N) Non-alloy structural steel
EN 10025-2 S355JR - S355K2 (+AR, +N) Non-alloy structural steel
EN 10025-5 * S355J0W - S355K2W(+AR, +N) Structural steel with improved atmospheric corrosion resistance
( * ) min 200 Mg per order, without CE
1.2 - Fine Grained Structural Steel
Standard Grade Description
EN 10025-3 S275N - S460N Fine grained structural steel for construction (standard range)
EN 10025-3 S275NL - S460NL Fine grained structural steel for construction (low-temperature range)
1. - Steel for Pressure Vessels and Boilers
Standard Grade Description
EN 10028-2 P235GH - P355GH, 16Mo3 Heat-resistant pressure-vessel steel
EN 10028-3 P355N Weldable fine grained steel normalised (standard range)
EN 10028-3 P275NH - P460NH Weldable fine grained steel normalised (high-temperature range)
EN 10028-3 P275NL1 - P460NL1 Weldable fine grained steel normalised (low-temperature range)
EN 10028-3 P275NL2 - P460NL2 Weldable fine grained steel normalised (special low-temperature range)
1.4 - Steel for Shipbuilding
Standard Grade Description
ASTM A 131 Gr A, B, D, E Structural steel for shipbuilding
ASTM A 131 Gr AH-32, DH-32, EH-32 Structural steel for shipbuilding
ASTM A 131 Gr AH-36, DH-36, EH-36 Structural steel for shipbuilding
* also acc. to LRS, DNV, BV, GL
Flat Products - An Overview
Heavy PlateBatory (Poland)
Thickness (mm) Width (mm) Length (mm) Tolerances
12.0 - 60.0 1500 - 3600 4000 - 12000 acc. to EN 10029
2 - Dimensions
10 Shaping the future of steelMittal Steel Europe
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
11 Shaping the future of steelMittal Steel Europe
1 - Steel Grades
1.1 - Structural Steel
Standard Grade Description
EN 10025-2 S235JR - S2355K2, E295 (+AR, +N) Non-alloy structural steel
EN 10025-3 S235JRC - S355K2C (+AR, +N) Steel for cold forming
EN 10025-5 S235J0W - S355K2W (+N) Structural steel with improved corrosion resistance
1.2 - Fine Grained Structural Steel
Standard Grade Description
EN 10025-3 S275N, NL - S460N, NL Fine grained structural steel for welded construction
EN 10125-6 S460Q, QL, Q1 - S690Q, QL, Q1 High strength, fine grained structural steel, quenched and tempered
1. - Structural Steel made to ASTM Standards
Standard Grade Description
ASTM A36, A283, A285 Gr A, B, C, D Structural steel
1.4 - Steel for Welded Pipes
Standard Grade Description
EN 10217-1 P195TR1 - P265TR2 Welded steel tubes for pressure proposes
EN 10217-2 P195GH - P265 GH, 16Mo3 Welded steel tubes for pressure proposes
API 5L Gr A, B, X42 - X70 Plates for large-diameter pipes
1. - Steel for Pressure Vessels and Boilers
Standard Grade Description
EN 10028-2 P235GH - P355GH Heat-resistant pressure-vessel steels
EN 10028-3 P275N, NH, NL1, 2 - P460N, NH, NL1,2 Weldable fine grained steel normalised
1. - Steel for Shipbuilding*
Standard Grade Description
ASTM A 131 Gr A, B, D, E Structural steel for shipbuilding
ASTM A 131 Gr AH-32, DH-32, EH-32 Structural steel for shipbuilding
ASTM A 131 Gr AH-36, DH-36, EH-36 Structural steel for shipbuilding
* also acc. to LRS, DNV, ABS, RINA
Flat Products - An Overview
Heavy PlateGalati (Romania)
Execution Thickness (mm) Width (mm) Length (mm) Tolerances
Without Heat Treatment 6.0 - 150.0 1500 - 4000 see diagram EN 10029/91
Heat Treated (N) 6.0 - 100.0 1000 - 4000 2000 - 30000 EN 10029/91
Heat Treated (QL) 6.0 - 75.0 1000 - 3000 3000 - 15000 EN 10029/91
2 - Dimensions
2.1 - Heavy Plates
Width (mm)
Thickness (mm) 100 100 1800 2000 2200 2400 200 200 2800 000 200 00 00 4000 Length
6.0 - 7.9 6.0 - 12.0
8.0 - 9.9 6.0 - 12.0
10.0 - 11.9 6.0 - 12.0
12.0 - 13.9 6.0 - 12.0
14.0 - 19.9 6.0 - 12.0
20.0 - 39.9 6.0 - 12.0
40.0 - 59.9 4.0 - 10.0
60.0 - 74.9 4.0 - 8.0
75.0 - 79.9 4.0 - 8.0
80.0 - 99.9 4.0 - 6.0
100.0 - 150.0 4.0 - 12.0
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
General heavy plates formats Boiler and commercial Quenched and tempered
Flat Products - An Overview
Cold Rolled
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 1100 1200 100 1400 100
0.40 - 0.49 *
0.50 - 0.59
0.60 - 0.69
0.70 - 0.74
0.75 - 0.79
0.80 - 0.99
1.00 - 1.29
1.30 - 2.00
2.01 - 2.50
A B C D
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130, EN 10139 DC01, DC03, DC04, DC05 A Low carbon steel for cold forming
1.2 - Enameling Steel
Standard Grade Dimension Range Description
EN 10209 DC01EK * B Low carbon steel for vitrious enameling
* after agreement
1. - Structural Steel
Standard Grade Dimension Range Description
DIN 1623-2 St 37-2G, St 37-3G, St 44-3G C General structural steel
1.4 - Micro-alloyed Steel
Standard Grade Dimension Range Description
EN 10268 H240LA*, H280LA* D High yield strength micro-alloyed steel for cold forming
* after agreement
Krakow (Poland)
12 Shaping the future of steelMittal Steel Europe
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 2.5 700 - 1500 610 or 500 max. 15 EN 10130 / DIN 1541
Narrow Strip 0.15 - 4.0 10 - 410 500 max. 5 EN 10140
Slit Strip 0.60 - 2.5 100 - 680 610 max. 7 EN 10131
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.40 - 2.50 700 - 1500 1400 - 4000 max. 5 EN 10130 / DIN 1541
- Surface
.1 - Surface Quality
Surface Type A (normal)
Surface Type B (improved - one sided)
.2 - Surface Finish
Roughness Symbol Ra (m)
Smooth g 0.90
Matt m 0.61 - 1.90
Rough r 1.6 - 3.0
. - Surface Treatment
No finish treatment
Oiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
Flat Products - An Overview
Cold Rolled
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 2 0 0 90 1000 1020
0.27 - 0.35
0.35 - 0.40
0.40 - 0.50
0.50 - 0.65
0.65 - 0.80
0.80 - 3.00
A B C D
Valcovny Plechnu Frydek-Mistek (Czech Republic)
1 Shaping the future of steelMittal Steel Europe
Execution Thickness (mm) Width (mm) Inside Dia (mm) Outer Dia (mm) Weight (MT)
Wide Strip 0.40 - 3.00 600 - 1020 508 or 610 max. 1600 max. 15
Slit Strip 0.40 - 3.00 20 - 600 508 or 610 - max. 5
2.2 - Strips
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.80 - 5.00 20 - 600 - - EN 10131
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130+A1 DC01 - DC04 A Low carbon steel for cold forming
1.2 - Structural Steel
Standard Grade Dimension Range Description
DIN 1623-2 St 37-2G - St 52-3G A General structural steel
1. - Micro-alloyed Steel
Standard Grade Dimension Range Description
EN 10268 H360LA B High yield strength micro-alloyed steel for cold forming
1.4 - Grain-oriented Electrical Steel
Standard Grade Dimension Range Description
EN 10107 (2006)M130-27S; M140-27S; M130-30S; M140-30S; M150-30S; M140-35S; M150-35S; M165-35S
CGrain-oriented electrical steel sheet and strip for transformers production
DIN 46400-3VM089-27N; VM097-30N; VM140-30S;VM155-35S; VM111-35N
CGrain-oriented electrical steel sheet and strip for transformers production
1. - Non-oriented Electrical Steel
Standard Grade Dimension Range Description
EN 10106M470-50A; M530-50A; M600-50A; M700-50A; M800-50A; M470-65A; M530-65A; M600-65A; M700-50A; M800-65A
DNon-oriented electrical steel sheet and strip for electrical motors production
- Surface
.1 - Surface Quality
Surface Type A (normal)
.2 - Surface Finish
Roughness Symbol Ra (m)
Smooth g 0.90
Matt m 0.61 - 1.90
Valid from 01/07/2006 - Version MSE0906Mittal Steel reserves the right to change any information of this brochure at any time without prior notice.
This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 7 9 21 2 20 00 20
0.09 - 0.14
0.14 - 0.20
0.20 - 0.40
0.40 - 1.20
1.20 - 4.00
4.00 - 5.00
A B C
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130 DC01 - DC04 A Low carbon steel for cold forming
DIN 1624 St 2 - St 4 A Low carbon steel for cold forming
1.2 - Structural Steel
Standard Grade Dimension Range Description
DIN 1623-2 St 34-2 - St 52-3 A General structural steel
EN 10025 S235JR - S355JR A General structural steel
1. - Micro-alloyed Steel
Standard Grade Dimension Range Description
EN 10268 H240LA - H380LA A High yield strength micro-alloyed steel for cold forming
SEW 093 ZStE 260 - ZStE 380 A High yield strength micro-alloyed steel for cold forming
1.4 - Carbon and Alloyed Steel
Standard Grade Dimension Range Description
EN 10082 C 10 - C 85 B Unalloyed quality steel for case hardening
EN 10132 80 Mn 4, 54 SiCr 6, 51 CrV 4, 55 SiCr 6, 60 SiCr 7 B Unalloyed and alloyed special structural steel for hardening
1. - Binding Steel Strips for Packaging
Standard Tensile strength Dimension Range Description
NORMAL Rm min. 690 MPa C For manual and automatic packaging
NORMAL PLUS Rm min. 690 MPa C For manual and automatic packaging
SPECIAL Rm min. 750 MPa C For manual and automatic packaging
PERFECT Rm min. 800 MPa C For manual and automatic packaging
SUPER Rm min. 930 MPa C For manual and automatic packaging
Flat Products - An Overview
Cold RolledNova Hut - Valcovna za studena (Czech Republic)
14 Shaping the future of steelMittal Steel Europe
Execution Thickness (mm) Width (mm) Inside Dia (mm) Outer Dia (mm) Weight (MT)
Narrow Strip 0.09 - 5.0 7 - 520 150 - 500 max. 1200 max. 5
Binding Strip 0.4 - 1.0 9 -32 280 - 350 max. 750 (1100)* max. 1 *
* oscillatory - multi layer
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Tolerances
Cut-to-length 0.8 - 5.0 20 - 520 1000 - 4000 EN 10140
- Surface
.1 - Surface Finish
Roughness Symbol Ra (m)
Bright b max. 0.6
Matt m 0.6 - 1.8
Valid from 01/07/2006 - Version MSE0906Mittal Steel reserves the right to change any information of this brochure at any time without prior notice.
This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
1 Shaping the future of steelMittal Steel Europe
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130 DC01 - DC03 A Low carbon steel for cold forming
1.2 - Enameling Steel
Standard Grade Dimension Range Description
EN 10209 DC01EK A Low carbon steel for vitrious enameling
Flat Products - An Overview
Cold RolledSkopje (Macedonia)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.50 - 2.50 610 - 1300 610 +/- 20 max. 20 EN 10130 / DIN 1541
Slit Strip 0.50 - 2.50 32 - 610 610 +/- 20 max. 5.0 EN 10130 / DIN 1541
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 00 700 800 900 1000 1100 1200 100
0.40 - 0.44
0.45 - 0.69
0.70 - 2.50
A
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length max. 2.50 610 - 1300 610 - 4880 max. 5.0 EN 10140
- Surface
.1 - Surface Quality
Surface Type A (normal)
.2 - Surface Finish
Roughness Symbol Ra (m)
Matt m 0.61 - 1.90
. - Surface Treatment
No finish treatment
Oiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
1 - Steel Grades
1.1 - Mild Unalloyed Steel for Cold Forming and Drawing Applications
Standard Grade Dimension Range Description
EN 10130 DC01 - DC04 A Low carbon steel for cold forming
DIN 1623-1 St 12, RSt 13, RRSt 14 A Low carbon steel for cold forming
1.2 - Structural Steel
Standard Grade Dimension Range Description
DIN 1623-2 St 37-2G A General structural steel
Flat Products - An Overview
Cold RolledGalati (Romania)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.4 - 3.5 1000 - 1500 610 +/- 15 max. 16.0 EN 10130 / DIN 1541
Slit Strip 0.4 - 3.5 80 - 750 610 +/- 15 max. 7.0 EN 10130 / DIN 1541
2 - Dimensions
2.1 - Cold Rolled Coils
Width (mm)
Thickness (mm) 1000 1100 1200 100 1400 100
0.40 - 0.59
0.60 - 0.79
0.80 - 0.99
1.00 - 1.24
1.25 - 1.74
1.75 - 1.99
2.00 - 2.24
2.25 - 2.99
3.00 - 3.50
A
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.4 - 3.5 1000 - 6000 1000 - 6000 max. 4.0 EN 10051
1 Shaping the future of steelMittal Steel Europe
- Surface
.1 - Surface Quality
Surface Type A (normal)
Surface Type B (improved - one sided)
.2 - Surface Finish
Roughness Symbol Ra (m)
Smooth g 0.90
Matt m 0.61 - 1.90
. - Surface Treatment
No finish treatment
Oiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
2 - Dimensions
2.1 - Hot Dip Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 120 100
0.40 - 0.44
0.45 - 0.74
0.75 - 1.50
1.51 - 2.50
A
1 - Steel Grades
1.1 - Hot Dip Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10142 DX51D+Z, DX52D+Z, DX53D+Z* A Continuously hot dip galvanised low carbon steel for cold formimg
* after agreement
1.2 - Hot Dip Galvanised Structural Steel
Standard Grade Dimension Range Description
EN 10147 S250GD+Z, S280GD+Z, S320GD+Z* A Continuously hot dip galvanised structural steel
* after agreement
Flat Products - An Overview
Hot Dip Galvanised
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 2.50 700 - 1500 508 or 610 max. 15 EN 10143
Slit Strip 0.40 - 2.00 50 - 600 508 max. 15 EN 10143
- Surface
.1 - Zinc Coating
Coating Thickness Z100; Z140; Z200; Z275*; Z350; Z450
* Galvanised 275 g/m2 double sided
.2 - Zinc Coating Surface Quality
Surface Type A (normal)
B (improved - one sided)
Execution of Zinc Coating N (normal spangle)
M (minimised spangle)
. - Surface Treatment
No finish treatment
Oiled
Passivated*
Passivated* and oiled
* Cr6+-free
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.40 - 2.50 700 - 1500 965 - 4000 up to 6000 * max. 5 EN 10143
* after agreement
17 Shaping the future of steelMittal Steel Europe
Swietochlowice (Poland) Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
1 - Steel Grades
1.1 - Hot Dip Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10142 DX51D+Z, DX52D+Z A Continuously hot dip galvanised low carbon steel for cold formimg
1.2 - Hot Dip Galvanised Structural Steel
Standard Grade Dimension Range Description
EN 10147 S280GD+Z A Continuously hot dip galvanised structural steel
Flat Products - An Overview
Hot Dip GalvanisedSkopje (Macedonia)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 2.50 610 - 1300 610 +/- 20 max. 21 EN 10143
Slit Strip 0.50 - 2.50 32 - 610 611 +/- 20 max. 5 EN 10143
2 - Dimensions
2.1 - Hot Dip Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 00 800 900 1000 1100 1200 120 100
0.40 - 0.44
0.45 - 0.69
0.70 - 2.50
A Hot Dip Galvanised Cold Rolled Coils
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length max. 2.50 610 - 1250 610 - 6000 max. 5 EN 10143
18 Shaping the future of steelMittal Steel Europe
- Surface
.1 - Zinc Coating
Coating Thickness Z100; Z140; Z200; Z275*; Z350
* Galvanised 275 g/m2 double sided
.2 - Zinc Coating Surface Quality
Surface Type A (normal)
B (improved - one sided)
C (best)
Execution of Zinc Coating N (normal spangle)
M (skin passed spangle)
. - Surface Treatment
No finish treatment
Oiled
Passivated*
Passivated* and oiled
*Cr6+ -free
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
19 Shaping the future of steelMittal Steel Europe
Flat Products - An Overview
Hot Dip GalvanisedGalati (Romania)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.4 - 2.0 1000 - 1350 610 +/- 15 max. 18 EN 10143
2 - Dimensions
2.1 - Hot Dip Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 1000 100 1100 110 1200 120 100 1400
0.40 - 0.49
0.50 - 0.79
0.80 - 0.99
1.00 - 1.24
1.50 - 1.74
1.75 - 2.00
A
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.4 - 2.0 1000 - 1350 2000 - 3000 max 4.0 EN 10143
- Surface
.1 - Zinc Coating
Coating Thickness Z100; Z140; Z200; Z275*; Z350; Z450
* Galvanised 275 g/m2 double sided
.2 - Zinc Coating Surface Quality
Surface Type A (normal)
Execution of Zinc Coating N (normal spangle)
. - Surface Treatment
No finish treatment
Oiled
Passivated
Passivated and oiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
1 - Steel Grades
1.1 - Hot Dip Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10142 DX51D+Z A Continuously hot dip galvanised low carbon steel for cold formimg
1.2 - Hot Dip Galvanised Structural Steel
Standard Grade Dimension Range Description
EN 10147 S220GD+Z - S280GD+Z A Continuously hot dip galvanised structural steel
2 - Dimensions
2.1 - Electro Galvanised Cold Rolled Coils
Width (mm)
Thickness (mm) 700 800 900 1000 120 100
0.50 - 0.54
0.55 - 0.74
0.75 - 1.50
A
1 - Steel Grades
1.1 - Electro Galvanised Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10152 DC01+ZE, DC03+ZE, DC04+ZE, DC05+ZE * A Electro galvanised low carbon steel for cold forming
* after agreement
Flat Products - An Overview
Electro GalvanisedKrakow (Poland)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.50 - 1.50 700 - 1500 610 max. 30 EN 10131
Slit Strip 0.50 - 1.50 100 - 680 610 max. 7 EN 10131
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.50 - 1.50 700 - 1500 1400 - 3000 max. 5 EN 10131
* after agreement
20 Shaping the future of steelMittal Steel Europe
- Surface
.1 - Zinc Coating
One Sided Coating ZE25/0; ZE50/0; ZE75/0; ZE100/0
Two Sided Coating ZE25/25; ZE50/50; ZE75/75; ZE100/00
.2 - Zinc Coating Surface Quality
Surface Type A (normal)
Surface Type B* (improved - one sided)
* after agreement
. - Surface Treatment
No finish treatment
Oiled
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
21 Shaping the future of steelMittal Steel Europe
1 - Steel Grades
1.1 - Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10130 DC01, DC03, DC04 A Low carbon steel for cold forming
1.2 - Electro Galvanised and Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10152 DC01+ZE, DC03+ZE, DC04+ZE A Electro galvanised low carbon steel for cold forming
1. - Hot Dip Galvanised and Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10169+1/10142 DX51D+Z, DX52D+Z, DX53D+Z* A Hot dip galvanised low carbon steel for cold forming
* after agreement
1.4 - Hot Dip Galvanised and Pre-painted Structural Steel
Standard Grade Dimension Range Description
EN 10169+1/10147 S250GD+Z* S280GD+Z, S320GD+Z A Hot dip galvanised structural steel
* after agreement
Flat Products - An Overview
Organic Coated
- Coating
.1. - Colour paint
Acc. RAL card from the supplier or samples from the customer
.2 - Coating System
Coating Type Symbol Thickness (m)
Polyester SP 18, 25
Matt Polyester SP 35
Polyvinylidenfluoride PVDF 25
Polyvinylchloride-Plastisol PVC (P) 100, 200
. - Protective Film
Transparent standard stripable film 35 m
Heat sealed film 70 m
2 - Dimensions
2.1 - Pre-Painted Cold Rolled Coils
Width (mm)
Thickness (mm) 740 800 900 1000 120 100
0.40 - 0.44
0.45 - 0.74
0.75 - 1.50
A Pre-Painted Cold Rolled Coils
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 1.50 740 - 1500 508 or 610 max. 15 EN 10143
Slit Strip 0.40 - 1.50 50 - 600 508 max. 15 EN 10143
2.2 - Sheets
Execution Thickness (mm) Width (mm) Length (mm) Weight (MT) Tolerances
Cut-to-length 0.40 - 1.50 740 - 1500 1000 - 4000 up to 6000* max. 5 EN 10143
* after agreement
Swietochlowice (Poland) Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
1 - Steel Grades
1.1 - Pre-Painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10130 DC01 A Low carbon steel for cold forming
1.2 - Hot Dip Galvanised and Pre-painted Mild Unalloyed Steel for Cold Forming
Standard Grade Dimension Range Description
EN 10169 - 1/10142 DX51D+Z A Hot dip galvanised low carbon steel for cold forming
1. - Hot Dip Galvanised and Pre-painted Structural Steel
Standard Grade Dimension Range Description
EN 10169 - 2/10147 S250GD+Z*, S280GD+Z A Hot dip galvanised structural steel
* after agreement
Flat Products - An Overview
Organic CoatedSkopje (Macedonia)
Execution Thickness (mm) Width (mm) Inside Dia (mm) Weight (MT) Tolerances
Wide Strip 0.40 - 1.50 610 - 1250 508 or 610 max. 15 EN 10143
- Coating
.1. Colour (paint)
Acc. RAL card. from the supplier or samples from the customer
.2 - Coating System
Coating Type Symbol Thickness (m)
Epoxy EP 20
Polyester SP 20, 25
Matt Polyester SP 25
Silicon Polyester SP-SI 25
. - Protective Film
Without protective film back coating suitable for polyurethan foam
2 - Dimensions
2.1 - Pre-Painted Cold Rolled Coils
Width (mm)
Thickness (mm) 10 800 900 1000 1100 1200 120
0.40 - 1.50
A Pre-Painted Cold Rolled Coils
22 Shaping the future of steelMittal Steel Europe
Mittal Steel reserves the right to change any information of this brochure at any time without prior notice. This product list applies to Mittal Steel European production. For more detailed information about production capabilities and product specifications, please refer to one of our sales office representatives.
Valid from 01/07/2006 - Version MSE0906
Sales Offices
Finland, Sweden, Denmark, Norway and Baltic statesVeistmnaukio 1-3World Trade Center20100 TurkuFinlandT +358 20 743 0940F +358 20 743 0941E tom.lonnroth@mittalsteel.com
United Kingdom and Ireland8 The Courtyard707 Warwick RoadSolihull, West Midlands B91 3DAUnited KingdomT +44 1217 114 141F +44 1217 114 410E philip.howitt@mittalsteel.com
Polandul. Chorzowska 5040-121 KatowicePolandT +48 12 290 1562F +48 12 290 3796E vipin.trehan@mittalsteel.com
Czech RepublicVratimovska 689707-02 Ostrava-KunciceCzech RepublicT +420 59 568 1111F +420 59 623 7143E chandan.das@mittalsteel.com
Germany, Austria, Switzerland and the NetherlandsWrthstrasse 12547053 DuisburgGermanyT +49 203 606 7326F +49 203 606 7318E flachprodukte@mittalsteel.com
France, Belgium and LuxembourgBP 3Site industriel de Gandrange57360 AmnevilleFranceT +33 3 8770 6689F + 33 3 8770 7871E jean-pierre.daudigier@mittalsteel.com
Slovak Republic and HungaryLetna 45 (2nd floor)Kosice 040 01Slovak RepublicT + 421 55 632 3949F + 421 55 682 9308E jan.zupcan@mittalsteel.com
Romania1, Smardan StreetGalati 800698Romania T +40 236 407 634F +40 236 407 635E vikram.kamath@mittalsteel.com
ItalyCentro Direzionale Milano Oltre/Palazzo TintorettoVia Cassanese, 22420090 Segrate (MI)ItalyT +39 02 269 315 25 - 26 F +39 02 269 315 40E bruno.bonino@mittalsteel.com
Spain and PortugalAribau, 195 2 Izq.08021 BarcelonaSpainT +34 93 414 3774F +34 93 201 5883E antonio.alsina@mittalsteel.com
Macedonia16 Makedonska Brigada Br. 181000 SkopjeMacedoniaT +389 2 3288 200F +389 2 3288 261E skopjeoffice@mittalsteel.com
GreeceZeppou 5116675 GlyfadaGreeceT +30 2 109 604 279F +30 2 109 652 588E mittalsteelgr@hol.gr
TurkeyTophanlioglu caddesi No: 9/6Kat 1 Altunizade, Istanbul, 34662TurkeyT +90 216 545 8555F +90 216 545 8556E mahesh.barve@mittalsteel.com
Mittal Steel Europe
Head Office
Hofplein 203032 AC RotterdamThe NetherlandsT +31 10 217 88 00F +31 10 217 88 88E annemarie.vanreeven@mittalsteel.com
www.mittalsteel.com
No part of this publication may be reproduced
or distributed in any form without the permission
of Mittal Steel, and no rights may be derived from
any of the contents.
Publisher:
Mittal Steel, Hofplein 20, 3032 AC Rotterdam
The Netherlands
Mittal Steel Europe
Hofplein 20
3032 AC Rotterdam
The Netherlands
T. +31 10 217 88 00
F. +31 10 217 88 88
www.mittalsteel.com