Station 31 & Station 35

Procedures for fill station with booster

pump

Wear hearing protection

Booster pump is very loud, hearing protection is required!

Make sure valve on booster pump is turned on. Valve is blue at sta. 35 and yellow at sta. 31

You can leave this valve in the on position at all times. There is no need to turn it off.

We are no longer using the “cascading” principle. Because of the new booster pump you now leave all the banks in the open

position. They will self equalize and be automatically refilled by the compressor.

Open door and insert bottle

Connect bottle, close bleeder valve, and open bottle

Close door and lock it

Set regulator pressure to 4500

Open fill valve. Bottle will fill to the set regulated pressure. Allow cylinder to fill slowly to avoid overheating.

Shut down procedures

Close fill valve

Bleed off regulator to 0 psi

Unlock door and open

Turn bottle off, open bleeder valve, and disconnect bottle

Take bottle out and close door

Relieve regulator pressure to 0

All done