Oasis Metal Manufacturing LLC - Strength through Performance

We believe that our philosophy, "Strength through Performance", is the right way to meet our customer's expectations.

Terminology

Grating

Span (Length of Grating)

Width of Grating

Plain Load Bearing Bar

Serrated Load Bearing Bar

Pitch

Terminology (Cont..)

Binding Bar

Grating Gross Area

Grating Nett Area

Cut-out

Straight Shaping

Curved Shaping

Terminology (Cont..)

Toe Plate

Curb Angle

Erection Clearance

Stair Tread

End Plates

Non Slip Nosings

Standard gratings are typically available in 6m x 1m or 20’ x 3’ panels

They can be produced with almost any combination of pitch size. Most commonly this is 41mm x 100mmor 30mm x 100mm.

Load bearing bars of width 20mm to 100mmand thickness 3mm to 6mm can be used. Bars can be plain or with a serrated edge finish of various depths.

Panels are available in self colour or with galvanized coating to international standards.

Standard Gratings

Shaped grating panels can be cut and profiled from standard grating panels to fit a specific floor area.

They can be fitted with non-slip edge bars and toe plates to suit the customer’s design.

All of our shaped gratings are subjected to stringent inspection at each stage of manufacture.

Our engineering department, equipped with the latest

Autocad facilities, can draw shaped gratings to meet your precise requirements.

They will assist you in choosing the correct type of grating to suit your application. Load tables for the most common sizes are shown on pages 15, 17, 19 and 21.

If required, one of our engineers can visit your site to survey the area to be covered and determine your exact requirement.

We also project manage the supply of our gratings to meet your technical and schedule requirements.

Shaped Grating

Stairtreads can be supplied with any combination of pitch size, bearing bar type and serration profile.

Each stairtread is supplied with end plates complete with slotted holes for easy installation.

  Typically, we supply the

stairtread with a slip resistant pyramid nosing bar. Other types of nosing are available on request.

  Standard sizes of our

stairtreads are 250mm and 280mm wide x 800mm, 1000mm and 1200mm long.

Stairtreads

Gratings can be supplied with our standard saddle top fixing clip.

Our engineering department can advise you on the correct type of clip needed for your application.

  We can also design and supply

customized clips for special applications when required.

Fixing Clips

Regional Services

We can deliver to your door across the Middle East with duty exemption in GCC countries.

We can take care of border crossing fees, documentation and clearance.

  All you need to do is offload the

truck when it arrives.

International Services

Our products can be quickly exported to any part of the globe through professional shipping agents.

We already export to more than thirty countries in all continents.

We can deliver to your nearest port or even direct to your door.

Get in touch with Oasis

Metal Manufacturing LLC Dubai

for your business needs.

Come Let’s Strength through Performance . . .

Thank You.