Post on 21-Jul-2015
Authorized Stockiest of radix Process Automation Instruments
Shop no.45, Oswal Complex ,X-280 ,MIDC Waluj ,AurangabAd-431136
Radix Temperature Controllers
Temperature
Controller :
Size: 96 X96 mm
Input: Cr/Al
No. of set Points :
Single Set Point
Prima-2 SP
Radix Temperature Controllers
Temperature
Controller :
Size: 96 X96 mm
Input: J/K/PT-100
No.of set Points :
Double Set Point
EC-96
Radix Temperature ScannerTemperature Scanner:
Size:
96(H)X192(W)X220(D)
mm
192(H)X96(W)X220(D)
mm
No.of Channel: Upto 16
Communication :
RS-485 MODBUS RTU
SCADA Software
Option : Printer port
Input: Universal
ISOSCAN-H&V
Radix Handheld ThermometerTemperature Indicator
Battery Operated
Surface Temperature
Measurement
Range: 00
to 12000
c
3 ½ Digit Display
DIGIRAD-
71
Radix Flameproof Temperature Controller
Input: Universal
Wall / Pipe Mounting
IP-55/65/66
Gas group : I,IIA,IIB &
IIC
TC-96
Radix Digital Timer (Din rail)
3 in 1 Timer:
1. ON delay
2. OFF delay
3. Cyclic
Universal supply voltage :
20 ~ 265 V AC/DC
0.1 seconds to 990 hours
9 user selectable ranges
4 user selectable modes
Also available in
48X48,72X72,96X96mm
Sizes.
T-25
Radix Counter/RPM Indicator0.000-999999 count range
with absolute
accuracy, 0.06-300000 RPM
with ultra
accuracy of 0.05% of reading
Application : Totaliser, RPH,
RPM, RPS,
Meters/Minute, Mains
Frequency etc.
Inputs : Proximity switch,
voltage pulses,
Limit switch, electromagnetic
pick up
Counting modes : Up, down,
bi-directional,
qudrature
RCT-203
Radix Temperature Transmitter·Solder jumpers for
· Span
· Zero
· Upscale / Downscale
· 4~20 mA / 20~4 mA
Multirange : 8 SPAN ranges, 25 to
600 C° / 45 to 1080 F°
4 ZERO ranges, -100 to +70 °C / -
148 to +158 °F
Accurate : 0.1% temperature linear
4~20 mA output
6.5 V loop drop allows 800 W load
@ 24 V DC
Upscale / downscale selectable
sensor break detection
4~20 mA or 20~4 mA selection
ON LED shows state
Pt50, Pt200, Pt500, Pt1000 on
request
TX1HM
Radix Hawkeye (Clean Room Monitor)
Microcontroller based
RH, Temperature & DP
measurement
User Programmable
for1,2 or 3 channel
measurement
Real time clock with
Battery Back-up.
RS-485/RTU multidrop
communication for PLC,
SCADA.
Hawkeye
Radix Temperature SensorsRTD :
Non-bendable sheath
-20 to 250°C range
Standard lengths: 150, 300,
450 & 600mm. Longer
assemblies not
recommended
Termination : Aluminium
head with threaded cap and
chain
Elements terminated into
nickel plated brass terminals
mounted on high purity
ceramic terminal block
Different types of terminal
heads
PG13.5 (F) single cable entry.
Dual entries & glands
optional
Head Type & Head type
with Adjustable Fitting
Radix Temperature SensorsTRANSITION JOINT RTD :
Integral cable makes the
assembly light and easy to
install
Easy to use models
Standard models for -20 to
250°C range; other ranges
available
SS316 sheath, SS316L
optional
PTFE insulated and
jacketed cables, stainless
steel overbraided cables
available
Supplied with 1 meter cable
or in multiples thereof
With Adjustable fitting &
Angular Construction
Radix Temperature Sensors
RTD :
Designed for the
pharmaceutical
industry
Eliminates the problem
associated with
ordinary probes where
the pressure cycling of
autoclave can force
moisture inside the
probe.
Autoclave RTD
Radix Temperature SensorsTHERMOCOUPLES :
Ceramic insulated wire-in-bead
construction
Available in K and N calibration
SS316 and Inconel 600 are
standard sheath materials
Also available in SS310, SS446 &
INCOLOY 800
Terminal heads for flameproof
applications also
½" BSP (F) cable entry as standard
Single cable entry without cable
gland as standard
Double cable entry and cable
glands optional
Elements terminated into nickel
plated brass terminals
mounted on high purity ceramic
terminal block
All models also available with dual
element configuration
With adjustable fitting &
Flange
Radix Temperature Sensors
THERMOCOUPLE :
Special purpose
temperature sensor for
rubber compound
mixing
Banbury Thermocouple
Radix Temperature SensorsTHERMOCOUPLE :
MeltAL is used for
continuous measurement
of molten aluminium
temperature. Life
expectancy is 1 to 5 years.
MeltAL is a new material
designed to withstand
molten aluminium corrosion
much longer than any other
material. Like ceramics, it
has good heat and abrasion
resistance. Unlike
ceramics, it is not brittle.
Molten Aluminum
Thermocouple
Shop no.45, Oswal Complex ,X-280 ,MIDC Waluj ,Aurangabd-431136
Calibration Services
Range:
0-40 kg/cm2
Pressure/Vaccum Gauge
Calibration
Calibration Services
Voltmeter
Ammeter
Multimeter
Tong tester
Megger
Electrical & Electronics
Calibration
Calibration Services
Temperature Controller
Temperature sensor
Temperature Calibration
Oven Temperature Maping (TTR)
In Powder coating
industry temperature
maping is must, we
provides accurate TTR
service with Graphical
reports.
Powder Coating Oven