Simple Uno

Sensor ListAdafruit SD Shield/RTCAnalog PressureAnalog HumidityAnalog Accelerometer (X and Z Axis) Digital Temperature

Adafruti SD Card Shield/RTCReserved Pins Function Attached ToD10-13 SPI/Chip Select D10-D13/D8A4 RSerial Data Line A4A5 Serial Clock Line A5

Sparkfun Proto Shield

Digital Temperature SensorPin Function Attached To1 Ground GND2 Data Bus Digital Pin 2, 4.7kΩ

Resistor connected to 5V Power

3 5V Input 5V

Humidity SensorPin Function Attached ToGND Ground Input GNDOU Analog Data Output A15V 5V Input 5V

TruStability Pressure SensorPin Function Attached To1 Nothing N/A2 5V Input 5V3 Analog Output A04 Ground Input GND

3-Axis AccelerometerPin Description Attached To

ST Self Test Pin N/AGSEL Input to select measurement level (1.5 or

6gs)3.3V

0GD Output that provides a signal when all axis are at 0g

N/A

SLP Input to enable Sleep Mode 3.3VXOUT X Axis Analog Output A2YOUT Y Axis Analog Output N/AZOUT Z Axis Analog Output A3GND Ground input GNDVCC Power input (3.3V) 3.3V

3-Axis Accelerometer

LEDs LED Positive Pin Ground PinPower 3 6Data Collection 5 6

Flight Ready ?Are all sensors working ?

Calibration ?

Is everything secure ? TapeStringHot Glue