Post on 05-Jul-2018
8/16/2019 Security 6 Uk
http://slidepdf.com/reader/full/security-6-uk 1/2
Sheet #653u – Security
SECURITY
This function deactivates the START key on the instrument front panel. Programs can only bestarted from the instrument relay board (I/O connector).
The "SECURITY" menu has to functions!
The first selects the lock mode for parameters access
the second deactivates the START key on the instrument front panel. Programs can only
be started from the instrument relay board (I/O connector).
.1 PROCEDURE
#rom the "CONFIGURATION" menu select
the "SECURITY" menu and then press the
button.
#or the parameters access mode by using the
arros select the "ACCESS"
menu and then validate by pressing .
Then by using the arros
select the mode among!
NONE ! no access limitation.
USB ! insert an $%& stick ith the
rights (a key.bin file is available in the'O*).
PASSWORD ! a passord is re+uired.
,hen the PASSWORD mode is selected aadditional unlock menu appears this menuallos to validate the lock function ith the
passord and set it.
#ollo instructions gives by the device.
Note: in case of PASSWORD mode choice,the parameters access with an USB stick (see
above) runs too.
-ersion .0a $ser guide ATEQ 6th series Page /1
8/16/2019 Security 6 Uk
http://slidepdf.com/reader/full/security-6-uk 2/2
Sheet #653u – Security
#or the "START OFF" menu by using the
arros select the
"START OFF" menu and validate ith the
key.
&y using the arros select
" Yes" and validate ith the key.
-ersion .0a $ser guide ATEQ 6th series Page 1/1