Post on 03-Oct-2020
WESTELL .COM
General DescriptionIntelligent management of diverse sites and equipment is critical for
the success of today’s distributed enterprises. As a leading provider
of intelligent site management, Westell provides solutions for
comprehensive monitoring, management, and control of virtually
any device through flexible equipment interfaces, distributed
intelligence, and enhanced communications.
The Remote RMC-700 and RMM-800 systems are powerful
intelligent monitoring and control devices that provide
comprehensive alarm monitoring, smart device connectivity, data
conversion and aggregation, and I/O capacity for sensors and
passive equipment. The Westell solution is designed to enhance
your network management strategy, reduce costs, and improve
operational efficiency by bringing assets and equipment within
immediate reach of your core business operations.
The Remote RMC-700 has a small footprint and can be conveniently
mounted in a telecommunications or utility closet, on a wall, or inside
virtually any indoor or outdoor enclosure to provide intelligent
management capabilities for local systems. The Remote RMM-800
also offers carrier-grade quality and reliability, but in a traditional
rack-mounted form-factor. The RMM-800 also adds SFP slots for
additional network connectivity options and PoE for powering IP
cameras and other devices via the two on-board gigabit Ethernet
ports. Both systems are the perfect choice for applications such
as generator management, fuel monitoring, environmental and
HVAC monitoring and control, aircraft warning light monitoring,
and physical security. The Remote family can connect multiple
applications simultaneously, reducing the physical, network, and
power footprint required for bringing diverse assets into a common
management platform.
The RMC-700 and RMM-800 require minimal power, and the RMC-
700 supports an optional backup battery to ensure continuous
operation through local power outages. In addition to traditional
building and shelter environments, both models can be integrated
into purpose-built cabinets, allowing for drop-in management of
critical outdoor systems, multi-tenant facilities, and other diverse
systems.
Remote RMC-700 and RMM-800
The Remote RMC-700 and RMM-800 are key hardware
components in the Westell intelligent site management solution.
The Remote units connect to sensors, controls, and intelligent
systems, collecting and aggregating alarms and performance data
while providing secure backhaul connectivity to management
systems via wireless, fiber or Ethernet connectivity. Together
with a management system (Westell’s Optima Prime, other 3rd
party management system, or both) the Westell Remote family
of products provides a complete solution for detailed monitoring,
remote control and management.
Product highlights include:
• Form-factors and mounting options for virtually any location
or enclosure to provide intelligent monitoring and control
exactly where it is needed
• Wireless and Ethernet connectivity options
• Small footprint and low power consumption
• Integrated dry-contact and analog sensor inputs
• Advanced equipment monitoring, management, and protocol
conversion
• Data aggregation for reduced network complexity and
management standardization
• Part of the extensive Westell Remote family of intelligent site
management platforms
RMC-700
Page 1 of 2
RMM-800
Copyright © 2017 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Westell, and Optima Management System are
registered trademarks of Westell, Inc. All other names are trademarks of their respective owners. Information is correct at time
of printing and is subject to change without notice. Westell, Inc. is an Equal Opportunity/Affirmative Action employer.
WESTELL .COM
030-200371 rB 032717
Page 2 of 2
Remote RMC-700 and RMM-800
Product overview Product SFP Ports
10/100/1000Ethernet Ports RS232 Ports RS485 Ports Discrete Ports Control
OutputsAnalog Inputs
Voltage
Remote RMC-7xx - 2 10/100 1 1 12 1 1* +/-20-60 VDC
Remote RMM-8xx 2 2 10/100/1000 (PoE)
1 1 16 1 1* +/-20-60 VDC
* Configurable as 0-10 VDC input or 4-20 mA input
Ordering Information
Remote RMC-700 Remote RMC-700 (standalone)
Remote RMC-743 Remote RMC-700 with 4G LTE AT&T WAN
Remote RMC-744 Remote RMC-700 with 4G LTE for international WAN
Remote RMC-745 Remote RMC-700 with 4G LTE Sprint WAN
Remote RMC-746 Remote RMC-700 with 4G LTE Verizon WAN
Remote RMM-800 Remote RMM-800 system
Remote RMM-843 Remote RMM-700 with 4G LTE AT&T WAN
Remote RMM-844 Remote RMM-700 with 4G LTE for international WAN
Remote RMM-845 Remote RMM-700 with 4G LTE Sprint WAN
Remote RMM-846 Remote RMM-700 with 4G LTE Verizon WAN
Remote Supported ProtocolsPPP/IPCP static routing (RFC 1332)
NTP client (RFC 1305)
Internet Protocol version 6 (IPv6) (RFC 2460)
TACACS+ AAA
SNMP (V1, V2c, V3)
Modbus RTU / ASCII
HTTP / HTTPS
Custom device support
Reliability/MaintenanceMTBF - 200,000 hours @ 25°C
MTTR - 30 minutes
Power and Battery Backup+/- 20 to 60 VDC power input (A&B dual-feed on RMM-800)
Battery backup connection with internal charger (RMC-700 only)
802.3af PoE output (RMM-800 only)
Remote RMC-700 Physical SpecificationsDepth: 0.92 in. (2.3 cm)
Height: 5.6 in. (14.2 cm)
Width: 9.95 in. (25.3 cm)
Weight: 1.6 lb (0.73 kg)
Mounting: Wall or cabinet mount
Power requirements: 5W (minimum); 12W (maximum)
Input voltage: +/- 20 VDC to +/- 60 VDC
Remote RMM-800 Physical SpecificationsDepth: 4.9 in. (12.45 cm)
Depth: w/SFP Port: 5.34 in (13.56 cm)
Height: 1.73 in. (4.39 cm)
Width: 17.0 in. (43.18 cm)
Weight: 1.8 lb (0.82 kg)
Mounting: 19” or 23” equipment racks
Power requirements: 8W (minimum); 15W (maximum)
Input voltage: +/- 20 VDC to +/- 60 VDC
Remote intelligent applications supportGenerator management
Fuel level monitoring
Battery, DC power, and rectifier monitoring
Energy metering and management
Aircraft warning and other lighting
HVAC, environmental, and refrigeration
Distributed antenna systems (DAS)
Security and access control systems