FTSK2 REMOTE FUEL SYSTEMThis option provides the automatic transfer of fuel from a bulk fuel tank that is located higher than thebasetank.The fuel is gravity fed from the bulk tank to the basetank.Whensettoautomatic,lowfuellevelinthe . r o s n e s l e v e l l e u f e h t y b d e s n e s s i k n a t e s a bTheDCmotorisedvalveisopenedandfuelis allowed to flow from the high level bulk tank by theforceofgravity. Tohelpensurethatclean fuel reaches the engine, fuel from the bulk tank . e v l a v d e s i r o t o m e h t o t r o i r p t s u j d e n i a r t s s iWhen the basetank is full, as sensed by the fuel level sensor, the motorised valve is closed. Any overflowintothebasetankoroverpressurein the basetank will flow back to the bulk tank via the extended vent. SYSTEM REQUIREMENTSHigh level bulk tank (item 1)* Control panel (item 2)DC motorised fuel valve (item 3) Fuel level switches in the basetank (item 4)Extended vent/return line (continuous rise) on the basetank (item 5)*Fuel supply line (item 6)*Fuel strainer (item 7)Isolating valve at the bulk tank (item 8)*Level gauge (item 9)*Not includedHEIGHT RESTRICTION BETWEEN BASETANK AND BULK TANKA Pressure head on basetankDistance A limited to 1.4 metres for all metal tank bases except for models GEP400-4 GEP750-1 where 'A' can be increased to 3.7 metres.Information contained in this publication may be considered confidential. www.CAT-ElectricPower.comMarket: InternationalDiscretion is recommended when distributing.Materials and specifications are subject to change without notice. 2008 CaterpillarLEHF1160-07 (11/08)CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow", as well as corporate and productAll rights reserved.identity used herein, are trademarks of Caterpillar and may not be used without permission.Printed in U.S.A.278-687A9 4 73268 15Floor LevelMExclusively from your Caterpillar dealer