Post on 16-Apr-2015
Fabrication Product GuideTotal Flooring & Access Solutions
Head OfficeBirmingham New Road
TiptonWest Midlands
DY4 9AQTel: +44 (0)1902 880880 Fax: +44 (0)1902 880446
Telford OfficeHalesfield 18
TelfordShropshireTF7 4JS
Tel: +44 (0)1952 685126 Fax: +44 (0)1952 588145
Scotland OfficeEtna Road
Middlesfield Industrial EstateFalkirk
StirlingshireFK2 9EG
Tel: +44 (0)1324 621000 Fax: +44 (0)1324 622381
Southern Ireland OfficeNaas Industrial Estate
NaasCounty Kildare
IrelandTel: +353 (0)45 879893 Fax: +353 (0)45 879816
sales@redmanfisher.co.ukwww.redmanfisher.co.uk
Information, recommendations etc. given in our literature, by our employees, representatives,
agents and distributors, with regard to our products and their uses, are based upon extensive
experience and given in good faith and without guarantee, since conditions of use are beyond
our control. The customer must be satisfied that the product is suitable for the purpose for
which it is intended to be used and the conditions under which it is to be used are suitable.
Under no circumstances will Redman Fisher be liable for incidental or consequential damage
arising from any alleged negligence. All orders are accepted subject to our Conditions of Sale,
which will be supplied on request, which prevail over any terms or conditions in or referred to in
the order or correspondence.
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 1
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
1
Company Profile
Glossary
Flooring ProductsFlowforge Flooring
Flowdeck Durbar Flooring
Flowforge Heavy Duty Flooring
Flowgrid / Flowgrate
Diamond Pattern Flooring
Flowlok Aluminium Flooring
Flowgrip
Standard Flooring Panels
Fast Fab
Ladders
Staircases / Stairtreads
Load Tables30 / 41 Pitch Flooring load tables
Stairtread & Handrailing Loads
Handrailing ProductsTubular / Solid Handrail Standards
Handrailing Sections
Handrailing Connectors
Steelwork, Metalwork & Architectural
Arco Redman
GRP Products
Accessories
How to order
Industrial / Applications
Page 1
Page 3
Page 5
Page 6
Page 7
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 17
Page 19
Page 20
Page 21
Page 22
Page 23
Page 25
Page 27
Page 29
Page 30
Contents
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
Redman FisherEngineering Ltd, a whollyown subsidiary of Hill &Smith Holdings Plc, is the leading manufacturerof industrial open grid flooring.
Redman Fisher offers the total solution forplatforms, walkways,handrailing, stairtreads,metalwork and steelwork
in Mild Steel, Stainless Steel, Aluminium & GRP to suit existing ornew requirements.
Focusing on practical engineering solutions, supported withadvanced technology and the latest in fully automatedmanufacturing processes, Redman Fisher has the capacity tohandle large or small projects and the flexibility to deliver qualityproducts on time and within budget.
Made up of four Business Units� Fabrication Division (Steel, Aluminium & GRP)� Access Design & Engineering� Standard Products (Steel, Aluminium & GRP)� Installation
Our service is supported by an extensive design office equippedwith the latest software to provide you with cost effective, value-engineered solutions that can be dispatched electronically.
Your enquiry or order will be processed by our dedicated salesteam offering a level of service to satisfy your expectations.
Company Profile
2
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 3
Load-Bearing Bar A longitudinal load-carryingmember of uniform sectionspanning between supports.
Transverse Bar A member fixed at rightangles to the load-bearingbars to provide lateral restraint.
Binding Bar A bar or section fixed to theedge of a flooring panelflush with the top of theload-bearing bars.
Deep Binding BarA bar section, of greaterdepth than the load bearing-bar, fixed to the edge of aflooring panel and projectingbelow the underside.
Span The overall dimension of aflooring panel parallel withthe load-bearing bars.
Length(Direction of Span). The overall dimension of a flooring panel parallel withthe load-bearing bars. (thisdimension is always referredto as ‘length’ even if it isshorter than the width.
6
5
4
3
2
1
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
3
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
4
Glossary
12
88
9
4
3
13
7
1
5 6
10
2
11
WidthThe overall dimension of aflooring panel measured atright angles to the load-bearing bars.
Pitch The distance centre-to-centre of load-bearing bars or centre-to-centre oftransverse bars.
Serrations Notches formed in the top surface of the load-bearing bars to improve slip resistance.
Slip-Resistant EdgingA member attached to thefront edge of a stairtread or to a flooring panel.
Toe Plate (Kick-Plate)A flat bar around a flooringpanel projecting above the top of the load- bearing bars.
End PlateA plate welded to a stairtread for fixing to a stringer.
Curb AngleA member fixed to concrete of supporting steelwork at the perimeter of a flooring area.
13
12
11
10
9
8
7
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 3
ApplicationsFlowforge is suitable for most flooring walkways, gantries, platforms etc and has been used upright as fencing. Serrated Flowforge gives improved grip in oil and icy conditions for improved performance particularly for the offshore industry.
* Load tables are available on page 15 & 16.
Flowdeck Durbar FlooringFlowdeck is half the weight of equal strength chequer plate. This equates to less tonnage for handling, transportation anderection than with the equivalent chequer plate, producing overallcost and weight savings.
Standard RangeThe basic substructure of Flowdeck is Flowforge Open SteelFlooring with load bearing bars at 41mm pitch (5mm thick for heavyduty type) with 6mm transverse bars welded at 100mm centres anda surface plate of 3mm thick durbar pattern chequer plate welded tothe substructure.
Special Flowdeck flooring can also be designed to suit wheel loadings.
Contact our sales office for more info.
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
5 6
Flowforge FlooringRedman Fisher open steelrectangular pattern flooring is constructed from mild steel to BS EN 10 025 Fe430A and is constructed by a forge-welding process in which theload bearing and transverse bars are heated and joined under pressure.
Standard RangePitch Bearing Bars Serrated Plain Galv Self Colour
41/100 25 - 50 flat
3mm or 5mm Yes Yes Yes Yes
41/50 25 - 50 flat
3mm or 5mm Yes Yes Yes Yes
30/100 25 - 50 flat
3mm or 5mm Yes Yes Yes Yes
30/50 25 - 50 flat
3mm or 5mm Yes Yes Yes Yes
Our full range of pitches available are: 41, 35, 33, 30 or 21 by 100,50, 75 or 37.5mm – see below. * 20 & 60mm depth available on request.
Bar ArrangementsMany types of flowforge bar arrangements have been developed to comply with worldwide application and safety requirements and allow a customer to choose a flooring to match loadingrequirements. In addition, a range of smaller mesh sizes gives theadded safety feature of stopping objects from passing between thebars and increased areas of underfoot contact.
Transverse bar are 6mm twisted square bar, but others are available.
Flowforge is available is standard panel form, normally from stock, in nominal 6m x 1m lengths. All fabrication is done from these 6m x 1m nominal mats to suit individual requirements.
Flooring Products
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 5
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
7 8
Flowforge Redman Fisher’s range of Heavy Dutyflooring combines all the advantages offorge welded Flowforge with the extraload carrying capabilities of a heavy-duty floor.
Heavy Duty Flowforge is constructedfrom load-bearing bars in various sizesat 35mm and 41mm pitch with 8mm or
9mm dia. rods forge welded to the upper edges of the loadbearing bars.
Other bar arrangements may be available upon request, dependenton quantity.
FlowgridFlowgrid is available with load bearing bars at 50mm pitch with12mm square bars securely welded to the load bearing bars at100mm pitch. Other bar arrangements are available on request,dependant of quantity.
FlowgrateFlowgrate is available with load bearing bars 30mm to 100mm.(These bars are spaced at 50mm, others are available on request.)
Standard finish is either self-colour or galvanised.
Flowgrid and Flowgrate is designed as heavy-duty industrialflooring, ideally suited for use as
� Bridge Decking � Trench Covers � All applications where extra heavy loadings need
to be sustained
Contact our sales office for more info.
Standard Range Readily available with:
� Plain or Serrated load bearings bars � 3mm or 5mm thick load bars� 38mm (D38) or 20mm (D20) gaps� Self Colour or Galvanised� Fully bound panels
In addition to our rectangularpattern flooring we can alsosupply our range of SafewayDiamond Pattern flooring in Mild Steel.
This flooring is constructed of load bars spaced at either38mm or 20mm separated bypressed spacer bars welded onunderside at every junction.
This is a traditionally a strongand stable flooring which givesan excellent feeling of completesecurity and safety which isespecially important whenworking at high levels, but italso retains the benefits oversolid plate flooring oftransmission of light and air.
ApplicationsDiamond Pattern flooring is particularly suited for:
� Power Stations� Water, Petrochem and
Process Industries � Offshore Installations
Diamond Pattern
Heavy Duty Flooring
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 7
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
9 10
Flowlok Aluminium Flooring
Flowlok is designed to give the maximum structuralperformance in corrosiveconditions.
By virtue of its design, Flowlok is easily cut to shapewithout weakening its loadcarrying capacity.
Open aluminium flooring is of a pressure locked construction withspecial transverse bars pressed into a retaining notch, within theload bearing bars giving a ‘locked-secure’ joint with nodependence on welding.
Applications� Architectural Walkways � Sunshades � Window Cleaning Access� Roof Walkways
Benefits include� Maximum Structural
Performance � Lightweight, Long Lasting
& Highly visible � Spark & Corrosion Resistant
Standard Panels are available in rectangular pattern, with a plaintop surface. For maximum slip-resistance a serrated top surface is also available.
FlowgripFlowgrip is an extrudedaluminium flooring with a ribbedpattern giving a slip resistant topsurface. It gives maximumstructural performance undercorrosive conditions and can becut to any shape to suitindividual requirements.
Flowgrip has a very highstrength to weight ratio and itslightweight, maintenance freequalities have led it to be usedextensively in many areas.
Available in two different depths(40mm deep and 25mm deep),both with a plain surface,serrated surface and slottedplank to assist slip resistant anddrainage if required.
Standard planks are 6m long by a nominal 250mm wide butFlowgrip is also supplied in a fully fabricated form to suit a client’s requirement.
Applications� Architectural Walkways � Sunshades � Window Cleaning Access� Roof Walkways
Benefits include� Maximum Structural Performance � Lightweight, Long Lasting & Highly visible � Spark & Corrosion Resistant
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 9
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
12
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
11
Standard Flooring PanelsOur Standard Products division isdedicated to supplying you with a range ofour products ‘Off the Shelf’. Stockline is aservice created to guarantee stocks of ourmost popular products on a daily basis.
If you wish to fabricate your own products,then our Standard Products Division isideal for you offering:
Standard Panels include� 6m x 1m in Mild Steel (Self Colour
or Galvanised) � Stainless Steel in grade 304 or 316 � Aluminium in 4m x 1m
Our most popular load bar sizes are� 25 x 3 � 25 x 5� 30 x 3 � 30 x 5� 40 x 3 � 40 x 5
in both 41/100 pitch and 30/100 pitch but if any of the above is not what you arelooking for we can manufacture to suit your specifications.
Benefits include� Reduced Delivery time
(usually 2/3 days)*� Flexibility of projects� Easy to order� Saving you Time & Money
* Dependant on stock availability.
Contact our sales office for more info.
Our Fast-Fab service is especially designed to help you out whenyou require fabricated flooring in a hurry.
Fast-Fab offers� Guaranteed Despatch� Quick Fabrication� Bespoke Projects� Up to 200m2
Fast Fab
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 11
Redman Fisher offer a completesolution in various ladder and access requirements.
Benefits include� User Confidence� Increased Safety� Variety� Installation� Self Assembly� Support
Cat LaddersWhen vertical access isrequired, Redman Fisher canoffer cat ladders to suit yourrequirements, offering you:
� Convenience � Self Assembly � Simplicity � Economy � Speed
Ships Type LaddersWherever possible it is desirableto install sloped ladders ratherthan vertical, Redman Fisheroffers a ships ladder used foraccess requiring a slope of atleast 65º up to 75º. Ships typeladders offer a superior meansof access over traditional catladders owing to the slope allowing easier ascent anddescent. Single line handrailing is required both sides of the ships ladder.
Contact our sales office for more info.
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
14
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
13
Ladders
Redman Fisher have the facilityto fabricate staircases and lightstructures in mild steel, with avariety of surface finishes.Redman Fisher staircases aregenerally constructed from RSCor flat plate stringers completewith open mesh or solid durbartreads and our tubular or solidhandrail systems.
StairtreadsRedman Fisher’s open steel stairtreads are supplied with a variety of different non-slip sighting bars as standard. The normal bar arrangement for stairtreads are the standardflowforge types with 41mm or 30mm pitch, various load bars and various bar arrangements.
Stairtread production with our robot welder has significantlyincreased our capabilities in stairtreads offering:
� Faster lead times for produced items� Range of ‘off the shelf’ stairtread items
To save you money and time on projects
Stockline Stairtreads include the following:
� 41/100 pitch � 25mm x 5mm load bearing bars� 800mm or 1000mm length� 242mm or 283mm width� Self Colour or Galvanised� Delivery next day*
*Whilst stock lasts
Please turn to page 17 for our stairtread loadings and end plate details.
Staircases /Stairtreads
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 13
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
15 16
Load Tables
Steel Flooring LoadTables - 41 PitchUse of Grating UDL
Light Duty (Access limited to one person) 3.0 kN/m2
General Duty (Regular two-way pedestrian traffic) 5.0 kN/m2
Heavy Duty (High density pedestrian traffic) 7.5 kN/m2
Flooring Type - 41/100Load Weight Uniform Loading - Maximum Span)
Bar Size kN/m2 3 kN/m2 5kN/m2 7.5kN/m2
20 x 3 0.148 890 920 800
20 x 5 0.228 0.228 1090 950
25 x 3 0.178 1240 1150 1000
25 x 5 0.275 1540 1360 1190
30 x 3 0.208 1560 1385 1200
30 x 5 0.325 1810 1640 1430
35 x 3 0.235 1780 1615 1410
35 x 5 0.373 2080 1915 1670
40 x 3 0.265 2020 1845 1610
40 x 5 0.423 2310 2140 1910
45 x 5 0.473 2550 2335 2110
50 x 5 0.520 2790 2530 2280
55 x 5 0.570 3010 2715 2450
60 x 5 0.620 3260 2900 2620*All units are in mm*For serration factor please contact sales*Other Configurations are available on request
Steel Flooring LoadTables - 30 PitchUse of Grating UDL
Light Duty (Access limited to one person) 3.0 kN/m2
General Duty (Regular two-way pedestrian traffic) 5.0 kN/m2
Heavy Duty (High density pedestrian traffic) 7.5 kN/m2
Flooring Type - 30/100Load Weight (Uniform Loading - Maximum Span)
Bar Size kN/m2 3 kN/m2 5kN/m2 7.5kN/m2
20 x 3 0.190 1040 1020 890
25 x 3 0.231 1450 1275 1110
25 x 5 0.363 1690 1510 1320
30 x 3 0.271 1700 1535 1340
30 x 5 0.431 2000 1815 1580
35 x 3 0.309 1970 1790 1560
35 x 5 0.496 2260 2090 1850
40 x 3 0.350 2190 2030 1780
40 x 5 0.564 2520 2310 2080*All units are in mm*For serration factor please contact sales*Other Configurations are available on request
Flooring Bar Arrangements
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 15
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
18
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
17
Load Tables
Handrailing Load TablesHandrailingHandrailing Maximum Centres of 1100 high standards fixed to
Steelwork (two hole flat base) at 550 centres
Item Size Material Loading Loading
Grade 0.36kN/m 0.74kN/m
Tubular Std 33.7 o/d x 3.0 thk 25NB S355 1040 520
Tubular Std 42.4 o/d x 3.0 thk 32NB S355 1720 860
Tubular Std 48.3 o/d x 3.0 thk 40NB S355 2000 1280
Tubular Std 48.3 o/d x 5.0 thk 40NB S355 2000 1820
Solid Std 32 dia solid S275 1400 700
Solid Std 38 dia solid S275 1950 1150
Solid Std 45 dia solid S275 2000 1800
HandrailingHandrailing Maximum Centres of 1200 high standards fixed to
Steelwork (two hole side palm) at 550 centres
Item Size Material Loading Loading
Grade 0.36kN/m 0.74kN/m
Tubular Std 33.7 o/d x 3.0 thk 25NB S355 820 410
Tubular Std 42.4 o/d x 3.0 thk 32NB S355 1500 800
Tubular Std 42.4 o/d x 4.0 thk 32NB S355 1720 860
Tubular Std 48.3 o/d x 3.0 thk 40NB S355 1840 1030
Tubular Std 48.3 o/d x 5.0 thk 40NB S355 2000 1600
Solid Std 32 dia solid S275 1180 600
Solid Std 38 dia solid S275 1800 1050
Solid Std 45 dia solid S275 2000 1800
Stairtread Load TablesThe tables below give all the necessary details for the most popular stairtreads.
Stairtreads41/100 Uniform Load
30 x 30 x 3 Nosing 5kN/M2
Load Bar Size Maximum Span*
25 x 3 730
25 x 5 1000
30 x 3 1100
30 x 5 1260
35 x 3 1280
35 x 5 1440
40 x 3 1440
40 x 5 1630
* Based on pedestrian loading
Flat Base Horizontal Side Palm
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 17
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
19 20
Tubular / Solid Handrail Standards
Redman Fisher handrailing andstandards are used in every typeof industry, for platforms,stairways, gangways, towers,danger zones and whereprotection is required againstmoving and stationary machines.
Standard finishes are self colour,or galvanised but other specialfinishes can be supplied such aspaint or powder coating.
Products include� Tubular Mild Steel� Solid Forged Mild Steel� Aluminium (Cast & Tubular)*� Stainless Steel (Tubular)*
Tubular Standards RangeOur tubular handrail standards include:
� 25 Nominal Bore Shank (33.7mm o/d)� 32 Nominal Bore Shank (42.4mm o/d)� 40 Nominal Bore Shank (48.3mm o/d)
with various ball sizes to suit 25NB, 32NB or 40NB tubularhandrail. 50NB available on request.
The Tubular handrail standards are produced using automaticsawing and welding machines and can be supplied as either fully fabricated or in kit form to suit your requirements.
*contact sales for more information
Handrailing Products
Solid Forged Handrail StandardsOur Solid forged handrail standards include:
� 32 dia shank forged to suit 25NB tubing� 38 dia shank forged to suit 25NB or 32NB tubing� 45 dia shank forged to suit 25NB, 32NB or 40NB tubing
Solid Forged handrail standards are produced using our multiforgemachine and can be supplied fully fabricated with base plates or inkit form to suit your requirements.
Base plates for both tubular and solid standards are 12mm thick(15mm available on request) with 18mm dia fixing holes.
Handrailing SectionsStandard Handrailing SectionsStandard Handrailing tubing is available as 25mm, 32mm and40mm nominal bore in mild steel with a self colour finish orgalvanised finish. Visit our website or contact our sales office for a copy of our stock sheet for items available ex stock.
Handrailing Stock Section range includes
D BendsStock 550mm centres with 400mm legs.
Raked D Bends To suit staircase inclines (38deg and 42deg). Stock 450 centres with 400 legs.
90º Bends Stock 400mm x 400mm legs.
Ramp Bends To suit staircase inclines (38deg and 42deg).Stock 400mm x 400mm legs.
Tubing 25NB, 32NB in nominal 6.4m lengths.
* Other sizes and dimensions can be made to suit.
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 19
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
21 22
Handrailing ConnectorsRedman Fisher offer a range of mild steel handrailing connectorsto complement our handrail standards and sections.
Handrailing Connectors
� Crimp Connectors Crimp connectors are for use with 25mm nominal bore (33.7mm dia) medium gauge tube. These connectors are used in association with a special crimping tool (available for sale or hire).
� Expanding Type ConnectorsExpanding connectors are for use with25mm nominal bore (33.7mm dia), 32mm nominal bore (42.4mm dia) and40mm nominal bore (48.4mm dia) tubular handrailing.
� Internal Grubscrew Type Connectors
Internal grubscrew connectors are suitablefor 25mm nominal bore (33.7mm dia),32mm nominal bore (42.4mm dia) and40mm nominal bore (48.4mm dia) tubularhandrailing, together with M8 grubscrews for fastening.
� Solid Handrailing Type Connectors
Solid Connectors are welded to the solid handrailing and ground flush. The male connectors fits into the female and are locked together by means of a grubscrew.
Steelwork & MetalworkRedman Fisher offers an extensive product range covering alltypes of metalwork and structural steelwork production for:
� Walkways� Gantries� Platforms� Ladders� Curbing� Buildings� Mezzanine floors� Portal frames� Beams & Trusses
…allowing you to deal with one supplier for all your site requirements.
ArchitecturalOur products are used in a variety of applications to providefunctional architectural features on building and civil engineering projects.
Products including industrial flooring, staircases, access platforms,balconies, balustrading, fencing, handrailing and most types ofindustrial metalwork are manufactured from our extensive facilitiesat Telford, to service large or small projects.
In addition to our standard product range we are able to satisfymost requests to aid design conceptions with tailor-madefabricated flooring grids from a wide variety of materials.
� Functional � Architectural� Versatile� Durable & Safe� Choice of Material� Installation Service
available
Steelwork, Metalwork& Architectural
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 21
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
23 24
Product Type RLThis louvred grating is ideal for solarshading as well as screens, vents andfencing. The bearing bar is offered at a 45deg or 60deg pitch in variousmesh pattern options.
Product Type ROCommonly used as fencing orbalustrade, type RO offers analternative look to type RR. It uses abearing bar from 25mm x 3mm to70mm x 3mm with a 5mm round cross bar. Various mesh alternativesare available.
Product Type AP - PerfoPerfo is a quick and cost effectivesystem for stairtreads, ramp access,walkways, cladding and generalflooring. It is constructed in 2mm or 3mm mild steel, 2mm stainless steel 304 or 3mm aluminium sheets.
This is punched into a relevant typethen formed into planks for grid sections, which can be open ended or welded on end plates for fixing.
Please contact our sales office for more details or contactArcoRedman direct on:
Tel: 01634 723372 - Fax: 01634 725572sales@arcoredman.co.uk
www.arcoredman.co.uk
ArcoRedman has been created by two of the leading global namesin innovative grating technology, Arco Grating (UK) Ltd andRedman Fisher Engineering Ltd. Together they have developed a pressed grating company to provide a ‘Best in Class’ UKmanufacturing service facility, delivering an outstanding level of customer service, skill and expertise.
Our success is based on bespoke tailoring, for all architecturaldesigns, industrial contracts and offshore work.
Product types include� RR – Regular Pressed Grating� RL – Louvered grating� RO – Round Cross Bar Grating� AP – Perfo
All products are available in a variety of finishes � Mild Steel� Galvanised� Aluminium� Stainless Steel (Grade 304 & 316)
Product Type RRWhether it’s traditional flooring,balustrade infills, sunscreens andfencing, type RR grating fulfils a variety of uses.
Constructed with two flat bars, the bearing bar is available from 20mm x 2mm to a 70mm x 3mm flat bar. Cross bars normally come as10mm x 2mm.
Over 100 mesh patterns are available in addition to the serratedand heavy duty 4mm and 5mm options.
Arco Redman
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 23
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
25 26
Flowgrate MouldedFlowgrate open mesh andsolid top grating is a costeffective, lightweight solutionfor walkways, platforms,gullies, trenches andMezzanine, offering good chemical resistancetogether with excellent anti-slip properties.
Flowgrate is easy to install and available in a variety ofthickness and mesh sizes.
Handrails & ScreensGRP handrails offer a lightweightcorrosion resistant system, manufacturedto suit your requirements.
LaddersGRP Ladders are manufactured inaccordance with the dimensionalrequirements of BS4211 1994 andBS5395 Part3 1995 for permanentladders and walkways.
StructuresGRP Structures are fabricated withprofiles manufactured using the latestpultrusion process, offering lightweightand high strength GRP Sections,providing a cost effective alternative to steel.
Drawings and structural calculations can be provided where required.
For more information on these or anyother GRP items please contact our GRP Department direct on:
01902 880880 or grp@redmanfisher.co.uk.
Redman Fisher have offered GRP Flooring for 25 years and throughcontinued development have become the leading manufacturer ofGRP access systems and standard products from design, throughto fabrication and installation.
Benefits of GRP include� Superb strength to weight ratio� Corrosion Resistance� Long Life – Low Maintenance� Slip Resistance
FlowGRiPGRP FlowGRiP plank flooring is apultruded, one piece construction,interlocking tongue and grooveflooring system for large spansand specialist applications.
FlowGRiP provides excellentimpact and loading characteristicsand is fast and easy to install withlow maintenance.
FlowtreadFlowtread is a pultruded grating system manufacturedusing ‘I’ section load bearing bars mechanically locked andbonded to transverse bars formaximum strength.
Flowtread grating is suitable forwide spans whilst offering a largeopen area for drainage.
Phenolic GratingPhenolic Flowtread and Flowgratetype PH provides ultimateperformance where FireResistance, Low Smoke andToxicity emissions are critical.
Designed to withstand prolongedfire exposure without sustainingstructural damage.
GRP Products
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 25
28
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
27
Redman Fisher offers a variety of accessories to compliment theflooring and handrailing products offered.
These include� Flooring clips (Assembled/Unassembled)� KickKlamp connectors
Flooring Clips – FD600Used to fix down open steelflooring our new universal range issuitable for 30 and 41 pitch andcomes standard with a 70mmslotted bolt and hexagon nut.
Other bolts sizes are available onrequest. Bag and Labelled in100No for convenienceassembled or to suit yourrequirements unassembled.
Flooring Clips – Deep Recess Weld StudProvides a frictionless fitting and lateral restraint to a floorinstallation improving safety evenwhen a top clip has been fixed.
Flooring Clips – FD551This pressed clip is used forsecuring flooring with narrow pitchgratings (21mm and 25mm pitch)
Our sales team will offer all the necessary components required tocomplete your project.
KickKlampsThese new brackets are our new revolutionary system for fixing KickFlat and toe board to handrail standards. The basic principal involvesgripping the kick plate with steel ‘forked fingers’ and fixing to thetube upright with a single grub screw.
Benefits Include� Retrofit to existing handrail� Eliminate drawing office detailing� No drilling required� Easy installation of kick flat on site� Simple, flexible and re-usable
KickKlamps are available to suit � 25mm nominal bore shank (K25) � 32mm – 40mm nominal bore shanks (K40)
To accompany our KickKlamp brackets we have connectors to helpconnect kick flat lengths.
KCB 1 – Internal Connector
KCB 2 – External Connector
KCB 3 – Straight Connector
Flat Base Fixing System� Fix KickKlamps at every standard on top
of the Kick flat and clamp down against the base plate of the standard
� Use corner brackets and straight connectors as required
Side Palm Fixing System� Alternate the KickKlamps, fixing them on
top and bottom of the kick flat bars� On shorter runs or for extra security, use
two KickKlamps per standard, one on top and one on the bottom of the kick flat
� Use corner brackets and straight connectors as required
Accessories
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 27
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
30
Tel 01902 880880 | Fax 01902 880446 | www.redmanfisher.co.uk
29
How to Order
Our product applications include:
Chemical & Process
Water & Waste Treatment
Rail & Transport
Offshore & Marine
Power Generation
Architectural
Leisure
Below is an easy to follow flow chart illustrating the informationyou require when ordering any Redman Fisher products.
Once you have filled in as much information as possible, pleasering sales on 01902 880880 for a quotation.
If at any time you have any problems please do not hesitate tocontact us via any of the following:
Tel: 01902 880880
Fax: 01902 880446
Email: sales@redmanfisher.co.uk
FlooringBalustradingStructuralGRPArchitecturalInstallation
Industry / Applications
FlooringBalustradingStructuralGRPArchitecturalInstallation
FlooringBalustradingStructuralGRPArchitecturalInstallation
FlooringBalustradingStructuralGRPArchitecturalInstallation
FlooringBalustradingStructuralGRPArchitecturalInstallation
FlooringBalustradingStructuralGRPArchitecturalInstallation
FlooringBalustradingStructuralGRPArchitecturalInstallation
5137_RF_pocket guide_02 28/10/05 12:29 pm Page 29