Henderson’s liquid application system can be used for more than just snow and ice prevention. The Henderson LAS can be used for anti-icing, deicing, dust control, weed control, water transporting, plant watering, soil stabilization and fire control...all from one unit!

THE LAS HAS THE FOLLOWING FEATURES: nOne, two, or three lane applicationsnSlips easily into a dump body with the help of

front and side wheel glidesnGlass-filled polypropylene fittings for good

resistance to corrosion and impactnManifold style fittings for ease of servicenClip-on nozzle bodies for easy removal to clean

or for maintenancenPowder-coated mild steel or 304 stainless

steel frames

OPTIONAL EQUIPMENT:nSurge bustersnSelf-loading leg kitsnHose reelsnChassis mountsnHigh and low pressure wash systemsnSeveral tank sizesnLift and tie down frame, available in mild steel

or 304 stainless steel

BOOM OPTIONS:nSingle BoomnDual BoomnVariable Orifice Nozzles

POLY TANK OPTIONS:n2,000 gallon, 1,800 gallon, 1,635 gallon, 1,235 gallon,

and 925 gallon capacitiesnOther tanks are available upon request

COMPATIBLE WITH ANY STANDARD CONTROLLER:nForce AmericanComponent TechnologynRaven IndustriesnDickey-johnnMicro TraknAnd others...

Ready for the Storm

LAS®

L I Q U I D A P P L I C A T I O N S Y S T E M

Free standing horizontal bulk storage tanks are manufactured from UV stabilized, high-density polyethylene. 16” vented lid. Tanks are equipped with molded-in legs to support the tank, and band locators for tie-downs as well as baffling. Tank walls are translucent for level viewing and equipped with gallon indicators. Tank tie-down hoops are powder-coated mild steel. Stainless steel is optional.

OPTIONALSurge Busters are the most effective solution for re-ducing or eliminating sloshing in tanks. They provide longer tank life and increase vehicle safety.

Standard valve for self-filling of unit.

OPTIONALRear-mounted ladder available in powder-coated mild steel or stainless steel.

OPTIONALMulti-lane boom with adjustable nozzles.

OPTIONALHeavy-duty self-loading leg frame. Front legs rotate up as unit loads into truck. Adjusts to multiple chassis heights. Quick-release pin for fast loading & unloading.Available in powder-coated mild steel or stainless steel.

Standard trunnion style boom valves. Ball valves optional.

Standard front rollers guide while loading.Standard adjustable check valve with a quick disconnect.

OPTIONALLow level liquid sensor

OPTIONALHose reel available with high or low pressure hand held spray guns. Can be ordered to specifications.

Photo shown with optional equipment.

FEATURES & SPECIFICATIONSOPTIONS

© Henderson Products, Inc., A division of Douglas Dynamics, L.L.C., reserves the right in pursuit of continuous product improvement to change specifications used herein. As a custom manufacturer of truck bodies, truck equipment and brine systems, additional product options may be available that are not shown here.

COMPLETE MUNICIPAL SNOW & ICE CONTROL SOLUTIONSPLOWS n WINGS n UNDERBODY SCRAPERS n SAND & SALT SPREADERS n STANDARD & PRECISION SPINNERS n DUMP BODIES n COMBINATION (MUNICIPAL) BODIES

BRINE PRODUCTION & MANAGEMENT SYSTEMS n ANTI-ICE SYSTEMS n PRE-WET SYSTEMS n SLURRY SYSTEMS n COMPLETE TURNKEY PACKAGES

1085 S. Third Street, Manchester, IA 52057Toll Free: (800) 359-4970 www.HendersonProducts.com HP-052 05/20

M A D E I N U S A

CONTRACT: 080818-HPI