mini 3D printer Kit - Assembly manual19

62 mini 3D printer Kit - Assembly manual

7.4 How to remove the printed object from thebed

(7.4.1) After printing is finished, user possible to remove the object by hand. If not,

use the small tweezers to nudge over the edge of the object gently. It will come off.

(7.4.2) Using cutter to nudge over the edge of the object. After that, use cutter

to decorate the printed object.

mini 3D printer Kit - Assembly manual63

(7.4.3) After printing longer time, change the blue tape on the printed bed of 3D

printer. It is one of mainly maintenance.