Post on 28-Apr-2015
description
PWHT.es Diciembre 2012 Nº3
Tratamientos térmicos de la soldadura
Postweld heat treatment
Boletín nº3, de la web PWHT.es: Tratamientos Térmicos dela Soldadura. En este número publicamos información sobre unidadesde tratamiento térmico de 12 canales
Bulletin nº3, of the website PWHT.es: Postwelding HeatTreatment. In this issue we publish information about heat treatmentunits 12 channels.
Este boletín, se envía a más de 4600 personas relacionadas con lostratamientos térmicos: empresas de tratamientos térmicos in-situ, empresas de controlde calidad, empresas de soldadura, empresas de tratamientos termoquímicos,fabricantes, etc.
This newsletter, is sent to more than 4600 people related to the heattreatments:heat treatment on-site companies, quality control companies, weldingcompanies, thermochemical heat treatments companies, manufacturers, etc...
PWHT.es
Nº 3, Diciembre 2012
PWHT.es
c/ Gob. González
43001, Tarragona, (Spain)
(+ 34) 977 228 206
Info@pwht.es
Publicidad:
ads@info.pwht.es
© PWHT.es, 2012
Eventos / Events Web
PWHT.es Tratamientos Térmicos de laSoldadura. Tras 6 meses, desde la apariciónde nuestra web hemos reunido más de uncentenar de documentos relacionados con lostratamientos térmicos de la soldadura,artículos, manuales, catálogos, informaciónsobre productos, enlaces a empresas delsector, imágenes, videos, etc. Queremosagradecer, las visitas recibidas durante esteperíodo, más de 30.000, de 90 países.
PWHT.es Postweld Heat Treatment.After six months online our website wehave collected over a hundreddocuments related to postwelding heattreatments, articles, manuals, catalogs,product information, links tocompanies, images, videos, etc.. Wewant to thank the visits received duringthis period, more than 30,000, from 90countries.
Heat Treatment Techs InternationalHeat Treatment and Stress Reliefof America
Dos grupos abiertos en Facebook formadospor personas relacionadas con el tratamientotérmico, con el objetivo de compartirinformación
Heat Treatment Techs InternationalHeat Treatment and Stress Relief ofAmerica
Two open group on Facebook formedby people related to the heat treatment,with the purpose of sharing information
Heat Treatment Techs International
Heat Treatment and Stress Reliefof America
Wrapping Specifications Sheets
Wrapping Specifications Sheets, es un excelente trabajodesarrollado por la empresa Superheat FGH, un pequeñolibro de bolsillo con indicaciones de montaje paraprecalentamiento y PWHT,para soldaduras pipe to pipe,hasta 36 pulgadas.Se puede solicitar en el suiguienteenlace. En nuestra opinion imprescindible
Wrapping Specifications Sheets is an excellent workdone by the company Superheat FGH, a smallhandbook with instructions for setup preheating andPWHT, in pipe to pipe welds up to 36 inches.You can apply at the following link.In our opinion essential
HBcalc
Podeis descargar desde nuestra web una nueva version deHBcalc, hoja de excel que calcula la longuitud minima dela banda de calentamiento y la banda de control degradiente, para el montaje de tratamientos termicos conresistencias electricas. Hemos añadido el calculo de laslonguitudes para precalentamiento, Bake-out ypostcalentamiento
You can download from our website a new version ofHBcalc, excel spreadsheet that calculates theminimum length of the heating band and the controlgradient band , for setup heat treatment with electricheaters . We added the calculation of the lengths topreheat, bake-out and postheating
En las siguientes páginas encontrareis las característicastécnicas de varios equipos para la realizacióntratamiento térmico in-situ con resistencias eléctricas,son unidades de potencia de 12 canales fabricados por3 compañías europeas: AEC Technology (Italia),Weldotherm (Alemania) y Termoproces (Serbia).
In the following pages you will find the specifications ofsome units to perform in-situ heat treatment withelectric heaters, power units are 12 channelmanufactured by three european companies: AECTechnology (Italy), Weldotherm (Germany) andTermoproces (Serbia).
Todos los equipos cumplen con los estándareseuropeos de seguridad. Incorporan protección porcontacto a tierra, interruptor general, paro deemergencia, diferentes sistemas de alarma, ventilaciónforzada, facilidades para el desplazamiento: argollaspara izado y ruedas. Se presentan en diferentesconfiguraciones de potencia eléctrica y tensión desalida, estas configuraciones pueden modificarse bajodemanda (solo presentamos los datos de un modelo decada fabricante)
All equipment complies with European safetystandards. Incorporate ground fault protection, switch,emergency stop, different alarm systems, forcedventilation, facilities for the movement: lifting bolts andwheels. They come in different configurations ofelectrical power and output voltage, these settings canbe changed on demand (only present data of a modelfrom each manufacturer)
AEC TECNOLOGY S.r.l.www.aectechnology.itinfo@aectechnology.itTelf.: +39 0373 752111Fax: +39 0373 74443
ModeloModel
ARES R/12 BT108
FabricanteManufacturer
AEC TECHNOLOGY
PaísCountry
ITALY
PotenciaPower
108 KVA
Tensión de redInput voltage
400V-440V-480V-500V THREEPHASE
Intensidad de corrienteAmperageTensión de salidaOutput voltage
45-90V
Intensidad x CircuitoOutput Amperage by Channel
9 KVA
Circuitos de salidaOutput Channels
12
Resistencias x circuitoHeaters by channel
2X50A
ProgramadorProgram Controller
YES
RegistradorRecorder
YES
Dimensiones ( W/D/H mm)Dimensions ( W/D/H mm)
700X1200X1100MM
Peso (Kg.)Weight (Kg.)
500 KG
Cable redSupply Cable
YES
N º cables de salidaNº output cables included
12
Otros / Other scr diode regulation/control paradiode scremergency switch/pulsador deemergenciahigh temperature switch/potencion de sobretemperaturaforced ventilation/ventilacionforzadapossibility to assembled a computerwith tft screen / ordenador conpantalla tft
TERMOPROCESwww.termoproces.comtermoproces@gmail.comTel: +38 111.2712.218Fax: +38 111.2712.199
ModeloModel
TPN-90/12-AR
FabricanteManufacturer
“TERMOPROCES”Belgrade
PaísCountry
Serbia
PotenciaPower
90kVA
Tensión de redInput voltage
380/400/420 V (three phases)
Intensidad de corrienteAmperage
125 A
Tensión de salidaOutput voltage
30V, 60V , 84V
Intensidad x CircuitoOutput Amperage by Channel
160 A
Circuitos de salidaOutput Channels
12
Resistencias x circuitoHeaters by channel
4x3.8kW
ProgramadorProgram Controller
PCD 33A (Shinko Japan)
RegistradorRecorder
HR- 706 (Shinko Japan)2x6 chanel
Dimensiones ( W/D/H mm)Dimensions ( W/D/H mm)
1350x1100x800
Peso (Kg.)Weight (Kg.)
508
Cable redSupply Cable
3x25m2 (15m)
N º cables de salidaNº output cables included
---
Otros / Other Thermocouple protection,Ground foult inerrupter,Overheating protection
WELDOTHERMwww.weldotherm.cominfo@weldotherm.deTel.: + 49 (0) 201 24 72 40Fax : + 49 (0) 201 24 72 442
ModeloModel
VAS 130-12
FabricanteManufacturer
Weldotherm GmbH
PaísCountry
Germany
PotenciaPower
130kW
Tensión de redInput voltage
400 /500
Intensidad de corrienteAmperage
188/151 A
Tensión de salidaOutput voltage
30V,60V (other on request)
Intensidad x CircuitoOutput Amperage by Channel
180A
Circuitos de salidaOutput Channels
12
Resistencias x circuitoHeaters by channel
4 x 45A (60V)
ProgramadorProgram Controller
Digit 1000
RegistradorRecorder
BH 60-12
Dimensiones ( W/D/H mm)Dimensions ( W/D/H mm)
1150 x 1350 x 900 mm
Peso (Kg.)Weight (Kg.)
680kg
Cable redSupply Cable
Direct connectioncontactor
N º cables de salidaNº output cables included
-------------------------
Otros / Other
Follow us in:
www.pwht.es
www.facebook.com/PWHT.es
www.youtube.com/user/PWHTes
Si su actividad laboral, profesional o empresarial esta relacionada con el mundo de los tratamientos térmicos, la soldadurao los ensayos no destructivos y desea compartir información sobre productos, técnicas, normas etc... , contacte conPWHT.es.
If their work, professional or business is related to the world of heat treatment, welding and non-destructive testing andwant to share information about products, techniques, standards etc ... , feel you free to contact with us
Todas las marcas registradas y logotipos mostrados en este boletín, son propiedad de sus respectivos propietarios
All trademarks and logos displayed in this newsletter are the property of their respective owners