Post on 16-Jan-2020
PROKIT EP 200The side protection for increased requirements
Product Brochure – Issue 12/2017
Content
Issue 12/2017
Publisher
PERI GmbHFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 1989264 WeissenhornGermanyTel. +49 (0)7309.950-0Fax +49 (0)7309.951-0info@peri.comwww.peri.com
System advantages 4 The side protection for
increased requirements
6 Fast assembly
System supplements 7 Practical system supplements
3
Important information
All current safety regulations and guidelines applicable in those countries where our products are used must be observed.
The photos shown in this brochure feature con-struction sites in progress. For this reason, safety and anchor details in particular cannot always be considered as conclusive or final. These are subject to the risk assessment carried out by the contractor.
In addition, computer graphics are used which are to be understood as system representations. For ensuring a better understanding, these and the detailed illustrations shown have been partially
reduced to show certain aspects. The safety in-stallations which have possibly not been shown in these detailed descriptions must nevertheless still be available. The systems or items shown might not be available in every country.
Safety instructions and load specifications are to be strictly observed at all times. Separate struc-tural calculations are required for any deviations from the standard design data.
The information contained herein is subject to technical changes in the interests of progress. Errors and typographical mistakes reserved.
Components 8 Components
4
System advantages
The side protection for increased requirements
PROKIT EP 200 protects site person-nel during construction of building shells against falling. The system ensures safe working areas and access ways thus increasing safety levels of jobsite personnel as well as improving work efficiency. In addition, the 2.00 m high mesh bar-riers prevent material from falling off the edge of the building. With just a few individual components, PROKIT EP 200 can be assembled very quickly without any tools.
Assembly of the PROKIT EP 200 an-ti-fall protection is extremely simple: high-quality tension belts – securely connected between two supports – serve as a mounting support for the PROKIT Fold Mesh. The 2.00 m high,
close-meshed barriers are easily at-tached to the tension belts with cable ties. Mounting this anti-fall protection is thus carried out completely inde-pendent of the slab itself, and the con-crete components remain undamaged.
The mesh barrier only weighs 7.5 kg and provides enhanced work ergonom-ics. The yellow powder coating increas-es the signal effect at the hazardous area; it is very durable and ensures a long life of the mesh screen.
If necessary, e.g. for inner-city con-struction sites, 2 screens can be ar-ranged one on top of each other as a floor-to-slab enclosure. With additional netting, the PROKIT EP 200 can also be used as dust protection.
■■ Reliable and safer protection against falling from open edges
on building shells (in accordance with DIN EN 13374, Class A).
■■ Fast assembly with only a minimum of light-
weight individual components as well as easy to handle con-necting means such as tension belts and cable ties.
■■ Floor-to-ceiling enclosure up to 3.90 m for optimal
protection with increased requirements.
■■ Slab-independent fixing without any damage to the
existing building structure
2.00 m
2.0
0 m
5
System advantages
The Tension Belt PTB 12 is ten-sioned between two supports and forms the sub-construction for the Fold Mesh PFR. The two-piece belt with a length of 12.00 m is equipped with hooks and securing straps.
Cable Ties PCT serve to attach the Fold Mesh to the Tension Belts. They are matched to the system and UV-resistant.
The tension belts are pulled through the eyelets, the hooks are attached which closes the strap around the support.
For preventing any damage to the support edges, a plastic hose is used which is pulled over the tension belt.
The Fold Mesh room height PFR with a height of 2.00 m and a width of around 66 cm, only weighs 7.5 kg.
The Fold Mesh sections have integrated hooks and eyelets on the longitudinal sides are easily attached to the adja-cent element. As the lower hook is 5 cm longer than its counterpart at the top end of the mesh, threading is done quickly and without any effort.
6
System advantages
Fast assembly
The fold mesh construction can easily be adjust-ed to suit wall offsets.
The mesh simply bypasses any columns posi-tioned along the installation path.
The powder-coated mesh barrier can also be used as rear safety protection for climbing form-work.
Belt assembly in detailThe extremely tear-resistant belt is placed around the first support, then looped around the second column. The ratchet is used to tighten with around 5 kN to 6 kN preload force.
PROKIT Tension Belts are approved and tested according to EN 12195-2 and the corresponding label is sewn on the lashing strap.
If required, two meshes can also be mounted one on top of the other with the overall height then reaching up to 3.90 m. However, three tension belts are normally sufficient. If securing working operations means that the mesh is installed directly up to under the slab, four tension belts are to be used.
7
System supplements
Practical system supplements
With the galvanized Wall Fixing PWF, the tension belts can fixed to the rising walls.
PERI PROKIT EP 200 is suitable in particular for use in high skeleton structures. The design of the 2.00 m high side protection gives site personnel a greater sense of security so that working efficiency at large heights is increased.
Also on working platforms, the PROKIT Fold Mesh serves as 2.00 m high protection.
For easy handling and safe logistics.45 meshes can be stacked and transported on one pallet.
PROKIT EP 200
8
Item no. Weight kg
117200 0.244 Eyelet-2 PEFor easy interconnection of tension belts.
72
82
26
118408 0.006 Cable Tie PCTFor fixation of the barriers to the tension belts.
Technical DataBlack, uv-resistant.Permissible load: 0.8 kN.
460 7,6
118349 3.530 Tension Belt PTB 12Two parts.
NoteConsider information on the belt Label!Technical DataTotal length 12 m, max. span 8 m. Permissible tension force 2.5 t.
12000
118350 7.690 Fold Mesh Room Height PFRNeed horizontal support.
2000
667 50
PROKIT EP 200
9
Item no. Weight kg
117020 0.213 Anchor Bolt PERI 14 x 150Re-usable. Approval available.
NoteSeparate Design Information on request.
150Ø14
SW 22
118406 1.920 MP Mounting PMF
326
4692Ø16
Ø18
80
118405 0.918 Wall Fixing PWFFor attaching the tension belts to concrete walls.
140
60 92
Ø18
117020 0.213AccessoriesAnchor Bolt PERI 14 x 150
118493 0.137 Edge Protection Plate PEPTo protect the edges.
295
100
118494 0.224 Edge Protector Hose PEH 1 mTo protect the edges and the tension belt.
1000
PROKIT EP 200
10
Item no. Weight kg
103434 38.500 Pallet RP-2 80 x 120, galv.For stacking and transportation of formwork and scaffolding components.
NoteFollow Instructions for Use!Technical DataPermissible load-bearing capacity 1.5 t.
1200 / 1500
1080 / 1380
853 60
0
100
800
680
035500 72.800 Stripping Cart, AluMobile working scaffold. Height-adjustable in 25-cm-increments. Platform height max. 2.00 m.
NoteFollow Instructions for Use!Technical DataPermissible load 100 kg/m2.
1800 750
3035
TN
ID
JP
TH
SGMY
KR
PHVN
AU
AE
LBTR
MA IL
KZ
RU
ZA
EG
AZ
IN
MZ
TZ
NA
AO
SA
IR
DZJO
NG
OM
US
AR
BR
CO
CL
CA
MX
PE
PA
QAKW
HK
CA PERI Formwork Systems, Inc. www.peri.ca
MX PERI Cimbras y Andamios, S.A. de C.V. www.peri.com.mx
PA PERI Panama Inc. www.peri.com.pa
US PERI Formwork Systems, Inc. www.peri-usa.com
AR PERI S.A. www.peri.com.ar
BR PERI Formas e Escoramentos Ltda. www.peribrasil.com.br
CL PERI Chile Ltda. www.peri.cl
CO PERI S.A.S. www.peri.com.co
PE PERI Peruana S.A.C. www.peri.com.pe
AO Pericofragens, Lda. www.peri.pt
DZ S.A.R.L. PERI www.peri.dz
EG Egypt Branch Office www.peri.com.eg
MA PERI S.A. www.peri.ma
MZ PERI (Pty.) Ltd. www.peri.co.mz
NA PERI (Pty.) Ltd. www.peri.na
NG PERI Nigeria Ltd. www.peri.ng
TN PERI S.A.U. www.peri.es
TZ PERI Formwork and Scaffolding Ltd www.peri.co.tz ZA PERI Formwork Scaffolding (Pty) Ltd www.peri.co.za
AE PERI (L.L.C.) www.peri.ae
AZ PERI Repesentative Office www.peri.com.tr
HK PERI (Hong Kong) Limited www.perihk.com
ID PT Beton Perkasa Wijaksana www.betonperkasa.com
IL PERI F.E. Ltd. www.peri.co.il
IN PERI (India) Pvt Ltd www.peri.in
IR PERI Pars. Ltd. www.peri.ir
JO PERI GmbH – Jordan www.peri.com
JP PERI Japan K.K. www.peri.co.jp
KR PERI (Korea) Ltd. www.perikorea.com
KW PERI Kuwait W.L.L. www.peri.com.kw
KZ TOO PERI Kazakhstan www.peri.kz
LB PERI Lebanon Sarl lebanon@peri.de
MY PERI Formwork Malaysia Sdn. Bhd. www.perimalaysia.com
OM PERI (L.L.C.) www.peri.ae
PH PERI-Asia Philippines, INC. www.peri.com.ph
QA PERI Qatar LLC www.peri.qa
SA PERI Saudi Arabia Ltd. www.peri.com.sa
SG PERI Asia Pte Ltd www.periasia.com
TH Peri (Thailand) Co., Ltd. www.peri.co.th
TR PERI Kalıp ve İskeleleri www.peri.com.tr
VN PERI ASIA PTE LTD www.peri.com.vn
North America Canada
Mexico
Panama
USA
South America Argentina
Brazil
Chile
Colombia
Peru
Africa Angola
Algeria
Egypt
Morocco
Mozambique
Namibia
Nigeria
Tunisia
Tanzania
South Africa
Asia United Arab Emirates
Azerbaijan
Hong Kong
Indonesia
Israel
India
Iran
Jordan
Japan
Korea
Kuwait
Kazakhstan
Lebanon
Malaysia
Oman
Philippines
Qatar
Saudi Arabia
Singapore
Thailand
Turkey
Vietnam
PERI International
FR
DE
CH
ES
BE
NL
IT
GB
LU
IR
TR
HUAT
CZ
DK
FI
NO
SE
PL
PT
ROSI
SK
EE
GR
LV
LT
BG
IS
UA
RS
BY
RU
HR
BA
AL
AU PERI Australia Pty. Ltd. www.periaus.com.au
AL PERI Kalıp ve İskeleleri www.peri.com.tr
AT PERI Ges.mbH www.peri.at
BA PERI oplate i skele d.o.o www.peri.com.hr
BE PERI N.V. www.peri.be
BG PERI Bulgaria EOOD www.peri.bg
BY IOOO PERI www.peri.by
CH PERI AG www.peri.ch
CZ PERI spol. s r.o. www.peri.cz
DE PERI GmbH www.peri.de
DK PERI Danmark A/S www.peri.dk
EE PERI AS www.peri.ee
ES PERI S.A.U. www.peri.es
FI PERI Suomi Ltd. Oy www.perisuomi.fi
FR PERI S.A.S. www.peri.fr
GB PERI Ltd. www.peri.ltd.uk
GR PERI Hellas Ltd. www.perihellas.gr
HR PERI oplate i skele d.o.o. www.peri.com.hr
HU PERI Kft. www.peri.hu
IR Siteserv Access & Formwork www.siteservaccess.ie
IS Armar ehf. www.armar.is
IT PERI S.r.l. www.peri.it
LT PERI UAB www.peri.lt
LU N.V. PERI S.A. www.peri.lu
LV PERI SIA www.peri-latvija.lv
NL PERI b.v. www.peri.nl
NO PERI Norge AS www.peri.no
PL PERI Polska Sp. z o.o. www.peri.com.pl
PT Pericofragens Lda. www.peri.pt
RO PERI România SRL www.peri.ro
RS PERI oplate d.o.o. www.peri.rs
RU OOO PERI www.peri.ru
SE PERI Sverige AB www.peri.se
SI PERI oplate i skele d.o.o www.peri.com.hr
SK PERI spol. s. r.o. www.peri.sk
UA TOW PERI www.peri.ua
Oceania Australia
Europe Albania
Austria
Bosnia and Herzegovina
Belgium
Bulgaria
Belorussia
Switzerland
Czech Republic
Germany
Denmark
Estonia
Spain
Finland
France
United Kingdom
Greece
Croatia
Hungary
Ireland
Iceland
Italy
Lithuania
Luxembourg
Latvia
Netherlands
Norway
Poland
Portugal
Romania
Serbia
Russia
Sweden
Slovania
Slovakia
Ukraine
PERI GmbHFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 1989264 WeissenhornGermanyTel. +49 (0)7309.950-0Fax +49 (0)7309.951-0info@peri.comwww.peri.com
DE
en 1
2 | 2
017
792
955
© P
ER
I Gm
bH
The optimal System for every Project and every Requirement
PERI GmbHFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 1989264 WeissenhornGermanyTel. +49 (0)7309.950- 0Fax +49 (0)7309.951- 0info@peri.comwww.peri.com
System-Independent Accessories
Column FormworkWall Formwork Slab Formwork
Climbing Systems Bridge Formwork Tunnel Formwork Shoring Systems
Construction Scaffold Industrial ScaffoldFacade Scaffold Access
Protection Scaffold Safety Systems Services