Post on 07-Jul-2015
PartName
Part descrip
tionMaterial
Manufacturing
Process
Quantity
Unit Cost
Total Cost
Structures
This part deal with product because structures have an effect on strength in any part of product.
-Wood-Nail
-Drilling-Cutting-Hammering
2 40 80
Chair
This part made from wood and hold by nail . In this part
-Wood-Nail
-Drilling-Cutting-Hammering
1 300 300
PartName
Part descrip
tion
Material
Manufacturing
Process
Quantity
Unit Cost
Total Cost
Table
This part made from wood and hold by nail. In this part you can put a book , Laptop or Tablet and can do work in document type.
-Wood
-Nail
-Drilling-Cutting-Hammering-Dubbing-Painting
1 200 200
Inside of
Total Cost
80+300+200+500 = 1080 Baht
Record the number of hours spent in each
manufacturing process.
-Cutting= 3 hrs.
-Drilling= 2hr.
-Hammering= 1.30 hrs.
-Dubbing= 1.30hrs.
-Painting =2hrs.
Total = 10 hrs.
Provide difficulties and problems encountered during the prototype development.
- It’s hard to move because product didn’t have rollers.
- Material have a high cost.
- Use time to make too much.
Provide the solutions for your second prototype.
- Find rollers and shaft . And assembly it with product (First prototype)
- Find a material that people didn’t use it.
- Manage a time and prepare manufacturing processes that my product use.