PRODUCT OVERVIEW INDUSTRIAL LUBRICATION -...

BAIER + KÖPPEL GmbH + CO BEETHOVENSTR. 14 POSTFACH 1320 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRÄZISIONSAPPARATEFABRIK D-91257 PEGNITZ D-91253 PEGNITZ FAX: +49 9241 729-50 E-MAIL: beka@beka-lube.de

te:05.0

Subject to alterations!

PRODUCT OVERVIEWINDUSTRIAL LUBRICATION

State 05/2009

BAIER + KÖPPEL GmbH + CO BEETHOVENSTR. 14 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRÄZISIONSAPPARATEFABRIK D-91257 PEGNITZ FAX: +49 9241 729-50 E-MAIL: beka@beka-lube.de XX

State 05/2009

PRODUCT OVERVIEWINDUSTRIAL LUBRICATION

te:05.0

Central lubrication systems00-1

Product overview

Single Line Lubrication Systems

Progressive-Central Lubrication Systems

Dual Line-Central Lubrication Systems

Multi Line-Central Lubrication Systems

Oil Lubrication Pumps

Grease Lubrication Pumps

Circulating Lubrication Systems

Special Lubrication Systems

Fittings and Accessories

Gear pump units ................................................................................................................................... 00-1-10-03

Pneumatic pump units .......................................................................................................................... 00-1-10-05

Hydraulic pump units ............................................................................................................................ 00-1-10-06

Manual piston pumps

Proportioning valves, metering valves .................................................................................................. 00-1-10-07

Metering distributor block, Metering unit ............................................................................................... 00-1-10-08

Distributor block, oil-air distributor 4299 ................................................................................................ 00-1-10-09

Progressive distributors ........................................................................................................................ 00-1-10-10

Dual line distributors ............................................................................................................................. 00-1-10-11

Components for main line controlling

Components for change-over monitoring

Oil lubrication pumps of the series T ...................................................................................................... 00-1-10-12

Oil lubrication pumps of the seriesA ...................................................................................................... 00-1-10-13

Oil lubrication pumps of the series D

Oil lubrication pumps of the series C ..................................................................................................... 00-1-10-14

Oil lubrication pumps of the series OKG ................................................................................................ 00-1-10-15

Magnetic pumps (K 407, K 412, K 442, FAZ04345-01)

Pneumatic pumps (P2663, P2664, P2669, P2686, PAU) ...................................................................... 00-1-10-16

Single piston-tappet pump (EHS) or tappet pump (SP)

Hydraulic pumps (FAZ02142-05, FAZ02142-06)

Grease lubrication pumps of the series PICO ........................................................................................ 00-1-10-17

Grease lubrication pumps of the series FK...-OC / FK...-EP

Grease lubrication pumps of the series PP-1 ......................................................................................... 00-1-10-18

Grease lubrication pumps of the series F (F6, F-super, F-super 3) ........................................................ 00-1-10-19

Magnetic pump (FAZ04345-03)

Grease lubrication pumps of the series FK ............................................................................................ 00-1-10-20

(FKR, FKP, FKG, FKG-V, FKG-S, FKG-A, FKGM, FKMS, FVAM)

Manual pumps (FHX 2,AZ-2535, FHX, FHX-MX) ................................................................................. 00-1-10-21

Pneumatic pumps (P2103)

Hydraulic pumps (HP-1,AZ-2369, HKP-1, HPM-2, HPG-2, HPH-2) ...................................................... 00-1-10-22

Flow control valve, Flow liwithing device, Volume flow control FXE ........................................................ 00-1-10-23

Gear pumps ......................................................................................................................................... 00-1-10-24

Internal gear pumps

Barrel pumps (EFP-1, EFPM-2, HFP, HFP-2U, Qmaxx) ........................................................................ 00-1-10-25

Lubrication pinions

Special units ......................................................................................................................................... 00-1-10-26

Accessories - oil reservoir ..................................................................................................................... 00-1-10-27

BAIER + KÖPPEL GmbH + CO BEETHOVENSTR. 14 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRÄZISIONSAPPARATEFABRIK D-91257 PEGNITZ FAX: +49 9241 729-50 E-MAIL: beka@beka-lube.de

te:05.0

EA 1,5 BEKA

Single Line-Central Lubrication Systems

Overview

Pump units

3Super 3 Super 3 Super EA-tronic Super EA-tronic Mini EA-tronic Mini 2

EA-tronic EA-tronic EA-tronicleft right with 4 l-reservoir with 6 l-reservoir with 3 l-reservoir

Gear pump units

Model Modele Output rate Pressure Reservoir Reservoir Delivery volume

(l/min) max. (bar) size (l) material

Super 3 EA-tronic

Super EA-tronic

Mini EA-tronic

Mini 2 EA-tronic

2805 3

left plastic,

2806 transparent

right Oil

4 aluminium 20 - 700 mm²/s

with 4 l-reservoir 0,4 35 or fluid grease

2800 6 steel acc. to release list

with 6 l-reservoir

3 plastic,

with 3 l-reservoir transparent

2810 1,5

oil 2727 0,4 40 3 Oil, 20 - 700 mm²/s

fluid grease 2728 plastic, Fluid grease a. release list

2712 0,25 28 1,2 transparent Oil, 20 - 700 mm²/s or

fluid grease a. release list

Model Modele Output rate Pressure Reservoir Reservoir Delivery volume

max. (bar) size (l) material

EA 1,5

BEKA Xlube

(l/min)

te:05.0

Overview

Pump units

EA 3 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6 EA 3 / EA 6

EA 6 with 3 l-reservoir with 6 l-reservoir with 13 l-reservoir with 16 l-reservoir with 30 l-reservoir

Gear pump units

2700 - -

(without reservoir)

3 GK - AlSi12

with 3 l-reservoir

6 steel

with 6 l-reservoir 2705 1 or 2 35 Oil

13 aluminium 20 - 700 mm²/s

with 13 l-reservoir

16 steel

with 16 l-reservoir

30 aluminium

with 30 l-reservoir

Model Modele Output rate Pressure Reservoir- Reservoir- Lubricant

EA 3 / EA 6

(l/min)

ES ES 2711 ES 2711 ES 2711 ES 2711 ES 2711

with 3 l-reservoir with 6 l-reservoir with 13 l-reservoir with 16 l-reservoir with 30 l-reservoir

(without reservoir) 2710 - -

3 aluminium

with 3 l-reservoir

6 steel Oil

with 6 l-reservoir 20 - 700 mm²/s

2711 0,4 35 13 aluminium or fluid grease

with 13 l-reservoir acc. to release list

16 steel

with 16 l-reservoir

30 aluminium

with 30 l-reservoir

Model Modele Output rate Pressure Reservoir- Reservoir- Lubricant

ES 2711

(l/min)

te:05.0

P30.2 P50.8 2564 P30-6 P5.2 / P8.4 / P8.8 P5.6 / P8.6to

with 2,7 l-reservoir with 6 l-reservoir with 6 l-reservoir

Pneumatic pump units

5P30 P50 P605 P5.1,2 P8.1,2 PPF-1und und

ohne reservoir ohne reservoir with 1,2 l-reservoir

2,5/ 4,2/ 8 plastic,

2,7 transparent Oil

with 3 l-reservoir 2564 30 or 50 1:9 5 - 10 20 - 700 mm²/s

6 steel or

with 6 l-reservoir fluid grease

2563 10 1:11 2,5/ 4,2/ 8 plastic, tr. acc. to

2565 15 1:8 4 - 8 6 steel release list

with 6 l-reservoir

Model Type Output rate Pressure Drive Reservoir Reservoir Lubricant

press. (bar) size (l) material

P30.2 to P50.8

P5.2 / P8.4 / P8.8

P5.6 / P8.6

(cm³/stroke) ratio

2564 30 or 50 1:9 5 - 10

(without reservoir) Oil

3 1:32 - - 20 - 700 mm²/s

(without reservoir) 2566 9,5 1:12 3 - 8 or

15 1:8 fluid grease

2562 10 1:11 4 - 8 1,2 plastic, acc. to

with 1,2 l-reservoir 15 1:8 transparent release list

2161 50 1:5 6 - 10 4

Model Type Output rate Pressure Drive Reservoir- Reservoir- Lubricant

P30 and P50

P5.1,2 und P8.1,2

(cm³/stroke) ratio

Overview

Pump units

te:05.0

Hydraulic pump units

Manual piston pumps

PH1/ PH6/ Ph10

without reservoir

Manual pump 2532 Manual pump 2533

1 1:2 Oil

2577 6 1:2 - - 20 - 700

10 1:1 mm²/s

without reservoir max. 55 1 - 2 or

1 1:2 fl. grease

2578 6 1:2 6 steel acc. to

10 1:1 release

with 6 l-reservoir list

Model Type Output rate Pressure Operating Relief pressure Reservoir Reservoir Lubric.

press. (bar) (bar) size (l) material

PH10-6

(cm³/stroke) ratio

2532 6/ 10/ 15 30 1,2 plastic, Oil, 20 - 700 mm²/s or

2533 6/ 10 transparent fl. grease acc. to release list

Model Type Output rate Operating Reservoir- Reservoir- Lubricant

Manual pump 2532

Manual pump 2533

(cm³/stroke)

Overview

Pump units

te:05.0

Metering elements

Metering valves (dynamic system)

Metering valves (static system)

Size 1 Size 1 Size 1 Size 1

with bolted connection Ø 4 with bolted connection Ø 6 with plug connection f. PA-pipes with plug conn. a. chamfer

20 4036 / 4036 / Oil

30 Plug Plug 50 - 700

50 connection connection mm²/s

100 4030 / for and or

150 Bolted PA-pipes chamfer max. 1 15 - 40 fluid greas.

200 connection acc. to

400 release

500 list

Model Met. volume Size Type / Connection type Relief Operating Lubric.

(mm³/stroke) press. (bar) press. (bar)

Z31ZV2

Z31ZV3 1

Z31ZV5

Z31ZV10

Z31ZV15

Z31ZV20 2

Z31ZV40

Z31ZV50 3

Z31ZV60

Z31ZV100

Z31ZV1

Z31DV.. / Z31DDV.. Z31DV.. / Z31DDV.. Z31DV..

with bolted connection with plug connection with elbow plug connection

Metering Type Relief Material LubricantOperating

Model volume Connection type pressure pressure

(mm³/stroke) (bar) (bar)

Z31DV3

Z31DV5

Z31DV10

Z31DV15

Z31DV20

Z31DDV3

Z31DDV6

Z31DDV10

Z31DDV16

30 - Bolted connection steel Oil

50 - Plug connection or 20 - 700 mm²/s

100 4031 for polyamide pipes max. 4 or fluid grease

150 -Elbow plug connections stainless acc. to

200 for polyamide pipes 15 - 40 steel release list

60 4032 - Bolted connection max. 1 steel Oil

100 - Plug connection 20 - 700 mm²/s

Overview

te:05.0

Metering elements

Metering distributor blocks

Metering units for direct lubrication point connection (static system)

4018 40181 4180 4181 41823 41841

Bolted connection Plug connection Bolted connection Plug connection Bolted connection Plug connection

Design A Design B Design C Design D

Design Model Metering vol. Type Connection type Relief DeliveryOperating

(mm³/stroke) pressure (bar) press. (bar) volume

L 30 4176 Bolted connection 40 - 250 mm²/s

T 60 max. 1 max. 35 fluid grease

W 100 acc. release list

(revolving) LS 4174 Plug connection Ø 4 mm Oil

(revolving) TS für Polyamidrohre 40 - 250 mm²/s

Size 1 Size 2 Size 3

Metering Type / Number Connections Relief LubricantOperating

Size volume Connection type of Main Lub. pressure pressure

(mm³/stroke) lub. points line line (bar) (bar)

41820/ 41823/ 41824

41840/ 41841/ 41842

30 Bolted connection M10x1

60 Pipe max. 3 12 - 50

100 Ø 6 mm

160 Plug connection 1 to 10 Oil

100 10 - 1000

200 Bolted connection M8x1 mm²/s

300 M12x1 Pipe or

400 Ø 4 mm fluid grease

600 Plug connection max. 4 16 - 50 acc. to

200 release list

400 Bolted connection M12x1

600 1 to 3 or

1000 G 1/8

1500 Plug connection

Overview

te:05.0

Distributor blocks

Oil / Air distributor 4299

Type Number of Metering volume Connection Connection Pressure connection

lub. points (mm³/stroke) sprayed air lubricant oil-air mixture

4299 2 / 4 / 6 / 8 10 / 20 / 30 / 50 M10x1 M10x1 M8x1, pipe Ø 4

(Plug connection)

Size Model Outlets No. of Design ConnectionType Material

outlets

1 Z32VL1 - Z32VL12

Z33VL2 - Z33VL24

2 Z32VL1/2 - Z32VL10/2

Z33VL2/2 - Z33VL20/2

one-sided 1 to 12 M8x1

two-sided 2x1 to 2x12 4020 with or without M10x1 steel,

one-sided 1 to 10 union nuts M10x1 galvanized

two-sided 2x1 to 2x10

or or or

Size 1 Size 1 Size 1

Z32VL3 Z33VL6 Z32VL4 Z33VL8 Z32VL5 Z33VL10

Metering elements

Overview

te:05.0

Overview

Progressive distributors

rs00-1

0Progressive-Central Lubrication Systems

MX-F SX-1 SX-2 SX-3 UX

Plate construction

Segment construction

SXE-2 / SXE-3 SXD SX-4 UX-5

Sandwich construction

Volume flow Press. No. of Connection Connection Metering vol.

Model Type max. outlet Material (mm³/stroke Lubricant

(cm³/min) (bar) max. p. outlet)

range (oil) outlets inlet

4010 2 - 400 24 M10x1 M10x1 steel, 25 - 105 Oils and

4000 5 - 500 300 galvanized 68 - 430 greases

3989 5 - 1800 20 G 1/8 G 1/8 75 - 470 up to

4008 stainl. steel NLGI-cl. 2

4005 50 - 6000 250 G 1/2 G 3/8 steel, chrom. 1130 - 2000

Volume flow Press. No. of Connection Connection Metering vol.

Model Type range (oil) max. outlets inlet outlet Material (mm³/stroke Lubricant

(cm³/min) (bar) max. p. outlet)

4003 300 G 1/4 G 1/8 steel,

3985 10 - 2000 G 3/8 G 1/4 galvanized 100 - 760 Oils and

3998 200 20 G 3/8 greases

4009 G 1/4 G1/4 / G1/8 steel, chrom. / up to

3986 50 - 6000 150 G 1/2 G 3/8 conn. plate 1000 - 3800 NLGI-cl. 2

aluminium

te:05.0

Overview

14/3-way 4/2-way Pressure changeover Differential pressure

control valve control valve switch control gear

Pressure No. of Connection Connection Metering vol.

outlets inlet

Temperature

Model Type max. range outlet Material (mm³/stroke

(bar) (° C) max. p. outlet)

3981 300 G 1/4 steel, 70 - 300

3980 (min. 35) 8 G 1/4 galvanized 300 - 1500

4001 400 -30 to 80 steel, chrom. / 250 - 3000

G 3/8 1.4305

4006 150 20 G 3/8 steel, chrom. 1130 - 2000

BV BW BZ UXZ

Dual line distributors

For controlling the main line For controlling the

changeover

4340 electric 400 8 GG-25

4065 electro-pneumatic 350 20 Oils

0421 hydraulic 150 / 300 8 steel, up to 20 000 mm²/s

galvanized Greases

4305 electric 400 - up to NLGI-cl. 2

Component Type Activity Operating Volume Material Lubricant

(bar) flow (l/min)

4/3-way control valve

4/2-way control valve

Pressure changeover

switch

Differential pressure

control gear

press.

Dual Line-Central Lubrication Systems

Dual line components

Dualline

ponents

te:05.0

Overview

Oil lubrication pumps

TDM-FSU TDM-FS 4

Series T

Number of Output rate No. of rotation Pressure Suction

Model outlets max.

TDM-FSU

TDM-FSU-M

TDM-FS 4

TDM-FS 4-M

Type max. (cm³ / stroke Reduction max. height

and outlet) (r / min) (bar) (mm)/(max)

1 - 2 0,1 33:1 300 - 1800 3 300

3 - 4 0,1 33:1 300 - 1800 3 300

TDM 2 TDM 4 TDM 8 TDM 4-M

Number of Output rate Pressure Suction

Model outlets

TDM 2-M

TDM 4-M

TDM 8-M

No. of rotation

Type max. (cm³ / stroke Reduction max. max. height

Power requirement: 0,09 kW; available for all pumps of the series T, see TDM-FSU-M, TDM-FS 4-M,

TDM 2-M, TDM 4-M, TDM 8-M

1 - 2 71,5:1 - 428:1 500 - 3000 3 / 5 300

3 - 4 500 - 3000 3 / 5 300

0,039 - 0,088

0,039 - 0,088 71,5:1 - 428:1

5 - 8 0,039 - 0,088 92:1 - 1050:1 500 - 3000 3 / 5 300

te:05.0

Overview

Series D

AZU AZP AF AFG AFG-M APG-M

Series A

Max. Output rate No. of rotation Pressure Suction

Model outlets

2240 25:1 100 - 600

50:1 200 - 1300

2242 25:1 max. 40

2244 18:1 100 - 500

25:1 100 - 600

12 0,06 36:1 150 - 1400 10 500

80:1 / 160:1 500 - 2400

320:1 / 640:1 1500 - 2800

50:1 / 80:1 / 160:1 1500 / 1800

320:1 / 640:1

2243 400:1 / 288:1 2900 / 3000

Max. Output rate No. of rotation Pressure Suction

Model outlets

2260 12:1/ 18:1/ 36:1 500 - 750

2262 2:1 80

2266 80:1/ 160:1/ 320:1 2500

12 0,15 640:1 50 1000

160:1/320:1/640:1 2500

80:1/ 160:1/ 320:1 Power requirement

640:1 0,25 kW

DU DP DG DFG DFG-M

te:05.0

Overview

Series C

oscillating rotating oscillating

C 1,5 CS 3 CS 3

Max. Max. Max. Max.

Type outlets Reduction r bar

and outlet

Model Drive cm³/stroke / min

CS 1,5

CCS 30

CC 30 M

CCS 30 M

rotating 2300 12

oscillating 2301

2310 12

2312 6

2320 24

12/18/36/72:1 500/750/1400/2600

1/ 3,15:1 40/125

rotating 2302 6 12/18/36/72:1 500/750/1400/2600

oscillating 2303 1/ 3,15:1 40/125

rotating 12/18/36/72:1 500/750/1400/2600

oscillating 1/ 3,15:1 40/125

rotating 12/18/36/72:1 500/750/1400/2600

oscillating 1/ 3,15:1 40/125

rotating 12/18/36/72:1 500/750/1400/2600

oscillating 2321 1/ 3,15:1 40/125

rotating 2322 12 12/18/36/72:1 500/750/1400/2600

oscillating 2323 0,15 1/ 3,15:1 40/125 50

rotating 2340 24 12/18/36/72:1 500/750/1400/2600

oscillating 2341 1/ 3,15:1 40/125

rotating 2342 12 12/18/36/72:1 500/750/1400/2600

oscillating 2343 1/ 3,15:1 40/125

rotating 2360 48 12/18/36/72:1 500/750/1400/2600

oscillating 2361 1/ 3,15:1 40/125

oscillating 2362 24 1/ 3,15:1 40/125

rotating 2363 12/18/36/72:1 500/750/1400/2600

with motor 2364 48 80/120/180/ 1500/1800

with motor 2368 24 240/360/720:1

rotating rotating

CCS 3 CCS 6 CC 30 CCS 30

oscillating oscillating

te:05.0

Oil lubrication pumpsOverview

5Magnetic pumps

K 407 K442 FAZ04345-01

Model Type Outlets Output rate Reservoir Reservoir

max. s material

(cm³ / stroke and outlet) ize (l)

FAZ04345-01

2652 0,75 plastic

2653 6 0,040 / 0,100 1,2

2640 4 plastic,

2643 2 - 6 0,015 / 0,025 / 0,035 0,4 transparent

Series OKG

Max. Output rate No. of rotation Pressure

Model outlets Reduction (rType max. (cm³ / stroke / min) max.

and outlet) (bar)

OKGGM-OC

OKGM-OC

OKGGM-EP

OKGM-EP

2035 21 0,005 / 0,010 / 0,015 - 15 200

DC 0,025 / 0,05

2029 21 0,005 / 0,010 / 0,015 - 15 200

with power unit, AC 1~ 0,025 / 0,05

2017 21 0,005 80:1 1350 at 50 Hz 200

AC 3~ 0,010 150:1 1600 at 60 Hz

0,015 300:1

0,025 400:1

0,050 600:1

1200:1

2040 3 0,06 / 0,12 / 0,17 - 15 250

2038 3 0,06 / 0,12 / 0,17 - 15 250

with power unit, AC 1~

2011 6 0,06 (80:1)* 1350 at 50 Hz 250

AC 3~ 0,12 150:1 1600 at 60 Hz

0,17 300:1

1200:1

OKGGM-OC OKGGM-OC OKGM-OC OKGGM-EP OKGGM-EP OKGM-EP

DC with power unit, AC 1~ AC 3~ DC with power unit, AC 1~ AC 3~

* Special request after consultation

te:05.0

Overview

Pneumatic pumps

Single piston-tappet pump (EHS) or tappet pump (SP)

P2663 P2669

EHS 0,6

Hydraulic pumps

FAZ02142-05 FAZ02142-06

2122 2 / 3 / 4,5 / 6 / 7,5 200 60 - 200 1 - 10

Model Type Output rate Operating pressure Drive pressure Number of

max. (bar) (bar) outlets

FAZ02142-05

FAZ02142-06

(cm³/stroke)

Outlets Output rate Reservoir Reservoir Compress. air

max. s material

Model Type max. (cm³ / stroke ize (bar)

and outlet) (l)

2663 0,025 0,5

2664 5 1,2 plastic

2669 0,010 0,5 6 - 10

2686 4 0,005 - 0,050 - -

2685 1 10 - -

Outlets Output rate Pressure Suction height

max. max. max.

and outlet

EHS 0,6

Model Type max. (cm³ / stroke

) (bar) (mm)

EHS 0,15 S55

EHS 2,5 - S

SP 0,56

SP 1,12

2140 4 0,15 300

2141 12

2135 1 2,50 in reservoir

2605 0,56 80 -

te:05.0

Grease lubrication pumpsOverview electrically driven grease pumps

FKGGM-OC FKGGM-OC FKGM-OC FKGGM-EP FKGGM-EP FKGM-EP

DC with PSU, AC 1~ AC 3~ DC with PSU, AC 1~ AC 3~

Max. Delivery volume Drive speed Pump speed Pressure

outlets motor / shaftDesign Type max. (cm³ / stroke Reduction 1 r. = 1 stroke max.

and outlet) (r / min) (r / min) (bar)

FKGGM-OC

FKGM-OC

FKGGM-EP

FKGM-EP

DC 0,005 / 0,010 / 0,015 15

2024 0,025 / 0,05 - -

with PSU, AC 1~

2016 21 0,005 80:1 200

AC 3~ 0,010 150:1

0,015 300:1 1350 at 50 Hz -

0,025 400:1 1600 at 60 Hz

0,050 600:1

1200:1

DC 3 0,06 / 0,12 / 0,17 - - 15

with PSU, AC 1~

2013 (80:1)* 250

AC 3~ 0,06 150:1

6 0,12 300:1 1350 at 50 Hz -

0,17 400:1 1600 at 60 Hz

1200:1

* Special request after consultation

Series FK...-OC / FK...-EP

Max. Delivery volume System Drive speed Pump speed Pressure

outlets type motor / shaftDesign Type max. (cm³ / stroke 1 r. = 1 stroke max.

PICO 8 0,005 / 0,010 / 0,015 Multi 200

DC 2185 0,025 / 0,05 line - 15

2 0,12 Progressive 280

te:05.0

Grease lubrication pumps

Overview

Design Type Max. Delivery volume Reduction Speed Pump speed Pressure

outlets max. (cm³ / stroke motor / shaft 1 r. = 1 stroke max.

FKGM-EP

FKG-EP

FKR-EP

(80:1)*

with norm motor 150:1 1500 at 50 Hz -

AC 3~ 2014 8 0,06 300:1 1800 at 60 Hz

0,12 400:1 250

0,17 600:1

with flange 56 C 1200:1 - min. 1

2015 7 14:1 / 19:1 max. 25

rotating 28:1 / 57:1

Series FK..-EP (continuation)

* Special requests after consultation

Series PP-1 (pneumatic drive)

Design Type Max. Delivery volume Control unit Operating pressure Pressure

outlets airmax. (cm³ / stroke max.

and outlet) (bar) (bar)

PP-1 2153 3 0,06 / 0,12 / 0,17 3/2-ways- 6 - 10 280

solenoid valve

with norm motor, AC 3~ with flange 56 C rotating

FKGM-EP FKG-EP FKR-EP

te:05.0

Grease lubrication pumpsOverview

Outlets Output rate Reservoir Reservoir

max. s materialModel Type max. ize

(cm³ / stroke and outlet) (l)

FAZ04345-03 2643 2 - 6 0,015 / 0,025 / 0,035 0,4 plastic, clear-sighted

Magnetic pump

Series F

F6 F-super 3 F-super 3F6 F-super F-super

rotating with geared motor with geared motor rotating with geared motor oscillating

Max. Delivery volume Speed Pump speed Pressure

Design Type out- max. (cm³ / stroke Reduction motor / shaft 1 r. = 1 stroke max.

lets and outlet) (r / min) (r / min) (bar)

F-super

F-super 3

2032 9:1 / 18:1 / 25:1 min. 1

rotating 36:1 / 50:1 - max. 25

2034 20 135:1/ 270:1/ 375:1

with geared motor 450:1/ 540:1/ 600:1 2800 -

AC 3~ 750:1/900:1/1250:1

0,06 1800:1/ 2500:1

2050 0,12 88:1 / 165:1 250

with geared motor 0,17 280:1 / 410:1 1420at 50 Hz

AC 3~ 600:1 / 800:1 1700 at 60 Hz -

21 1000:1

15:1 / 22,5:1 min. 1

rotating 2051 45:1 - max. 25

oscillating 2052 2,5:1

2053 1420 at 50 Hz

with geared motor 46:1 1700 at 60 Hz -

AC 3~ 3 0,56 400

15:1 / 22,5:1 min. 1

rotating 2054 45:1 - max. 25

oscillating 2055 2,5:1

te:05.0

Overview

Multi Line-Central Lubrication Systems00-1

Series FK

rotating oscillating rotating rotating rotating rotating

vertical swivelling by 90° vertical vertical

FKR FKP FKG FKG-V FKG-S FKG-A

with motor with motor with motor

FKGM FKMS FVAM

Outlets Output rate Drive speed Press.

max. / speedModel Type max. (cm³ / stroke Ratio max.

and outlet) (r / min) (bar)

2007 93 / 52 cm³/h 84:1 / 150:1 1400

with motor 12 26 / 21,5 cm³/h 300:1 / 400:1 50

2008 13 / 6,5 cm³/h 600:1 / 1200:1 1500 at 50 Hz

with motor 1800 at 60 Hz

2030 8 30 / 22,5 cm³/h 420:1 / 560:1 1400 100

with motor 16,8 cm³/h 750:1

Outlets Output rate Drive speed Press.

max. / speedModel Type max. (cm³ / stroke Ratio max.

and outlet) (r / min) (bar)

2000 14:1 / 19:1 min.: 28/38/56/114

rotating 28:1 / 57:1 max.: 210/300/430/850

2001 3,5:1 35

oscillating

2002 84:1 / 150:1

rotating vertical 300:1 / 400:1

12 0,1 600:1 / 1200:1 50

rotating 84:1 / 150:1 300 - 2800

swivelling by 90° 300:1 / 400:1

2005 600:1 / 1200:1

rotating vertical

2006 8 300:1 / 450:1

rotating vertical 900:1

te:05.0

Grease lubrication pumpsOverview

Manual pumps

Pneumatic pump

FHX 2 AZ-2535 FHX FHX-MX with MX

Model Type Output rate Reservoir s Reservoir Pressure

material

max. (cm³ / stroke) (l) max. (bar)

AZ-2535

FHX-MX

2534 1,5 1,2 plastic, 300

3 clear-sighted 150

2535 1,5 1 / 1,5 / 2 / 3 / 4 steel 150

2081 2 0,4 (kg) Kartusche 400

w. progressive distributor

Model Type Output rate Reservoir s Reservoir material Compr. airize

max. (cm³ / stroke) (bar)

P2103 2103 2 / 4 / 6 1,2 (l) plastic, clear-sighted 4 - 8

1 / 1,5 / 2 / 3 / 4 (kg) steel

te:05.0

Hydraulic pumps

HP-1 HKP-1 HPM-2 HPG-2

Overview

2163 0,12 280 30 - 200 3

2104 1 / 2 / 4 / 6 / 10 480 25 - 160 1

2121 1 250 60 - 250 2

2574 0,2 to 2,0 250 130 - 250 1

2581 0,27 250 130 - 250 1

2574 0,0 to 1,0 250 to 350 beginning at 100 bar 1

Model Type Output rate Operting pressure Drive pressure No. of

max. (bar) (bar) outlets

AZ-2369

(cm³/stroke a. outlet)

te:05.0

AccessoriesOverview

Accessori

Circulating Lubrication Systems

Flow control valve

4060 10 - 250 7 0,1 - 8 steel 1,65 Oils

10 - 1000 mm²/s

Type Operating Pressure Volume Material Weight Lubricant

(bar) drop (bar) flow (l/min) (kg)pressure

Volume flow control

FXE 250

steel 0,7

with conn. plate 4063 250 (cover + 0,85

without conn. plate 4064 0,05 - 12 1,2 aluminium) Oils

steel 2,2 20 - 1000 mm²/s

with conn. plate 4063 630 (cover +1,8

without conn. plate 4064 VA)

Model Type Operting press. Volume Meas. volume Material Weight Lubricant

max. (bar) flow (l/min) (cm³) (kg)

FXE 250

FXE 630

Flow limiting device

4365 5 - 200 5 1,15 - 3,00 steel 0,39 Oils on synt. a. mineral. basis

(without add-ons) (dep. on orifice disk-Ø) 20 - 600 mm²/s

Type Operating Pressure Volume Material Weight Lubricant

(bar) drop (bar) flow (l/min) (kg)pressure

te:05.0

Gear pumps

Series Pump type Output rate Pressure

max. (bar)

(l/min)

1 to 5

Flange- and 0,10 - 3,00 35

motor pumps 0,25 - 2,40 50

Flange pumps

Foot pumps 1 - 65 30

Motor pumps - horizontal

Motor pumps - vertical

Flange pumps Foot pump Motor pumps

horizontal vertical

Motor pumps

Internal gear pumps

Series Pump type Output rate Pressure

max. (bar)

FLI UI

(l/min)

FLIS UIS

Connections radial Flange- and

and foot pumps

Connections on the face 4 - 32 100

Connections radial Motor pumps

Connections on the face

FLI UI FLIS UIS MZIR MZIand and

Gear pumps

Overview

Circulating Lubrication Systems00-1

te:05.0

Barrel pumps, Lubrication pinionOverview

ps,Lubri

Special Lubrication Systems

Barrel pumps

EFP 1 EFPM-2 HFP Qmaxx with Lifter

Output rate Barrel s Voltage Drive Press.ize

Model Type Drive max. (cm³ / stroke) (kg) (V) pressure (bar) / max.

-volume (l/min) (bar)

EFPM-2

HFP-2U

2196 24 -

electric 0,33

2197 20/ 25/ 50/ 200 115 -

230 / 400 280

2198 26 - max. 32 /

hydraulic max. 10

2188 33 (at 3,2 l oil) already - 30 - 80 / 315

29 (at 4,5 l oil) existing 3 - 5

2187 electric 3000 / 9000 200 400 / 500 - 150

Lubrication pinion

Module*Width o. tooth** Design

16 65 / 75 / 112 / two-piece

120 / 134 / 140

18 100 single-piece

18 110 / 120 / 125 / two-piece

135 / 165 / 180

18 340 three-piece

19 180 two-piece

20 60 / 80 / 100 single-piece

20 120 / 135 / 140 / two-piece

148 / 160 / 170 /

20 230 three-piece

Module*Width o. tooth** Design

4 40 single-piece

5 30 single-piece

8 35 single-piece

10 45 single-piece

10 80 / 90 / 100 two-piece

11 140 three-piece

12 55 / 80 / 100 single-piece

12 80 / 100 / 112 / two-piece

14 80 single-piece

14 110 / 120 / 132 two-piece

16 79,5 / 100 single-piece

* Type = 4410, No. of tooth = 9 ** Width of tooth can be choosen variable acc. to use

Module*Width of tooth** Design

22 130 / 140 / 170 two-piece

24 85 single-piece

24 180 two-piece

25 80 single-piece

27 180 two-piece

28 146 two-piece

30 190 / 210 two-piece

32 398 vierteilig

36 220 two-piece

48 215 two-piece

50 180 two-piece

50 340 three-piece

Design: two-piece

te:05.0

BEKA manufactures lubrication- and hydraulic units

according to customer’s request. Planning and

construction are done according to the customer’s

specifications.

Representation exemplary

Special units

Specia

Overview

Special Lubrication Systems00-1

te:05.0

AccessoriesOverview

Accessori

Fittings and Accessories

Oil reservoir

FAZ03455-00 FAZ01918-03 FAZ03433-02 FAZ03433-00

Model Type Reservoir size Reservoir material

FAZ03455-00

FAZ01918-03

FAZ03433-02

FAZ03433-00

FAZ03532-00

2,5 PA

0457 4,2 PE

te:05.0

Agencies

BAIER+KÖPPEL GMBH+COPRÄZISIONSAPPARATEFABRIK

BEETHOVENSTRASSE 1491257 PEGNITZ

POSTFACH 13 2091253 PEGNITZ

GERMANY

fon +49 9241 729-0fax +49 9241 729-50

e-mail beka@beka-lube.deweb www.beka-lube.de

Industrial Lubrication

Vehicle Lubrication Systems

Spray Lubrication Systems

Lubrication Systems for the Packagingand Filling Industry

Environmental Technology

Control and Monitoring Electronics

Telemetric Systems

Machines, Plants, Tools

Lubrication Systems for Wind Converters

BELGIUMBEKA LUBE N.V.S.A.Demerstraat 32BE 3200 Aarschotfon 0032 / 16 / 64 09 26fax 0032 / 16 / 64 05 48e-mail bekalube@skynet.be

KOREABEKA AHWON326-1 Danggung DongGunpo Si Kyungki Do Koreafon 0082 / 31 / 451 / 0628fax 0082 / 31 / 451 / 0974e-mail jhleeahwon@yahoo.co.kr

CHINAEAST TSANHAIR COMPANY LTD.Room 206, No. 9 HangfengRoad, Fengtai Science CityBeijing 100070, P.R. Chinafon 0086 / 10 / 83 681 526fax 0086 / 10 / 83 681 520e-mail east-tsanhair@263.net

FRANCEBEKALUBE FRANCE

fon 0033 / 386fax 0033 / 386e-mail contacts@bekalube.fr

4, bis Rue de l’Artisanat89100 Paron

/ 83 39 06/ 83 39 06

ITALYBEKALUBE s.r.l.Via Rossi 15220043 Arcorefon 0039 / 039 / 618 00 88fax 0039 / 039 / 61 75 23e-mail bekalube@bekalube.it

CANADABEKA-LUBE Products Inc.2830 Argentia Road, Unit 9Mississauga ON L5N 8G4fon 001 / 905 / 821 / 1050fax 001 / 905 / 858 / 0597e-mail info@beka-lube.com

NETHERLANDSBEKA NEDERLAND B.V.Wagenmakerij 114762 AV Zevenbergenfon 0031 / 168 / 37 15 38fax 0031 / 168 / 33 83 29e-mail info@beka.nl

AUSTRIABEKA-Lube GmbH

5020 Salzburg

fon 0043 / 662 / 43 84 40fax 0043 / 662 / 42 07 17e-mail

Lieferinger Hauptstrasse 93

office@beka-lube.at

TURKEYBEKAMAKS MAKINA SANAYIVE TICARET LTD. STI.Kücükyali is Merkezi34852 Maltepe / Istanbulfon 0090 / 216 / 367 34 00fax 0090 / 216 / 367 33 85e-mail info@bekamaks.com

USABEKA-MAX of America2600 North America Drive Suite 8P.O. Box 615West Seneca, NY 14224fon 001 / 905 / 821 / 1050fax 001 / 905 / 858 / 05 97e-mail info@beka-lube.com

Subsidiaries

Argentinia

Australia

Belarus

Bosnia

Brazil

Denmark

Estonia

Finland

Great Britain

Greece

Hong Kong

Indonesia

Iceland

Ireland

Latvia

Lithuania

Luxemburg

Malaysia

Morocco

New Zealand

Norway

Poland

Portugal

Russia

Serbia

Slovakia

Slovenia

South Africa

and others

Croatia

Czechia

Hungaria

Sweden

Switzerland

Agencies

BAIER + KÖPPEL GmbH + CO BEETHOVENSTR. 14 TEL.: +49 9241 729-0 WEB: www.beka-lube.dePRÄZISIONSAPPARATEFABRIK D-91257 PEGNITZ FAX: +49 9241 729-50 E-MAIL: beka@beka-lube.de XX

PRODUCT OVERVIEW INDUSTRIAL LUBRICATION -...

Documents

Transcript of PRODUCT OVERVIEW INDUSTRIAL LUBRICATION -...

INDUSTRIAL & FOOD GRADE LUBRICATION GUIDE · INDUSTRIAL & FOOD GRADE LUBRICATION GUIDEINDUSTRIAL & FOOD GRADE LUBRICATION GUIDE. TABLE OF CONTENTS ... Many petroleum products are

LUBRICATION EQUIPMENT - arozone.com · 4 AROzone.com • Lubrication Catalog / (800) 495-0276 • arotechsupport@irco.com ARO® lubrication pumps deliver unmatched industrial-strength

BEKA MAX LUBRICATION SYSTEM INSTALLATION AND OWNER …parconfreiwald.ro/pub/BEKA/Beka_MAX/Komatsu HD605-7 Watercart.… · beka max lubrication system installation and owner manual

Engine Diagnostic Equipment - Lincoln Industrial | Lubrication

LubTec Progressive Lubrication System-Industrial applications

Industrial Lubrication and Tribology - mediatum.ub.tum.de · Industrial Lubrication and Tribology Influence factors on gearbox power loss ... Introduction Future energy shortages

Automatic lubrication systems for industrial applications

Pumps and accessories - Lincoln Industrial | Lubrication Systems

DN-Dry Teflon Industrial Lubrication

Lubrication solutions for industrial applicationstaylorfuels.com/wp-content/uploads/Total-Lubrication-solutions-for... · Lubrication solutions for industrial applications. Total

rajgrp.comrajgrp.com/images/Industrial Brochure.pdf · LUBRICATION SOLUTIONS FOR INDUSTRIES ... industrial and automotive applications, ... KYROS RDOS 100 oils, used for lubrication

Lubrication tools and equipment - Lincoln Industrial

Industrial Lubrication Equipment Buyer’s Guide

Lubrication Fittings & Accessories · Lubrication Fittings & Accessories Introduction 2 A Lincoln Industrial lubrication fitting can be used for all of your lubrication needs. Our

Automated Lubrication Systems for Industrial · PDF fileAutomated Lubrication Systems for Industrial Applications ... generation, automotive and ... systems eliminate drum disposal

Central Lubrication. Dry Belt Lubrication. - BEKA

Specialty Tools and Equipment - Lincoln Industrial | Lubrication

Electric pump EP-1 - Beka · The BEKA-MAX central lubrication pump model EP-1 is electrically actuated and has up to a maximum of 3 independentlyoperatinglubricantoutlets.Aseparatepump

Automatic lubrication systems for industrial … lubrication systems for industrial ... Why Lincoln automatic lubrication systems? • Manual lubrication typically ... unique capability

Accessories for Lubrication Systems - Lincoln Industrial