Post on 02-Jul-2018
Printed for
-2-
Inoxfucine was founded in 1963 by Pietro Pugassi together with
Gianfranco Guindani. Since the very beginning Inoxfucine has been
engaged in the development of special metal alloys for petrochemical, oil
and gas, pharmaceutical and food plants. Through the years the company
has always followed closely all development and integration of new metal
alloys; the company is equipped with technologically advanced
equipments for the open die forging of STAINLESS STEEL including DUPLEX
AND SUPERDUPLEX, ALLOYS, NICKEL ALLOYS AND CARBON STEEL.
Through constant investments in new equipments, rebuilds and upgrades,
Inoxfucine offers the most comprehensive, advanced capabilities and
services for forgings in the following markets all over the world: Chemical,
Petrochemical / Oil and Gas, Automotive, Energy, Aeronautics and
Aerospace, Food, Pharmaceutical, Shipbuilding, Military .Our strength is to
be a team of people with an high flexibility, a tailor-made attention to the
customer needs and to have a well-known experience in terms of special
alloys and most demanding requirements, together with the capability of
working every day with the same enthusiasm and passion shown by the
Pugassi family since the beginning.
-3-
Index
Products pag 4-14
Materials pag 15-16
Equipments pag 17
Contacts pag 23
Heat Treatment pag 18
Quality-Laboratory pag 19-20
Conaco Strainers pag 21-22
-4-
Rings and pipes
MAX OD (A) 2.000 mm
MAX THK(C) 650 mm
MAX WEIGHT 4 tons
-5-
Rings and pipes
-6-
Flat bars
MAX WEIGHT 4,5 tons
-7-
Flanges
Welding Neck
Long Welding Neck
Blind
Slip On
Socket Welding
Special Flanges
Lap Joint
Threaded Flanges
-8-
Flanges
-9-
MAX 24’’
Balls
-10-
Balls
-11-
Bars
MAX WEIGHT 6 tons
-12-
Discs
MAX OD (A) 1.500 mm
MAX THK (B) 400 mm
-13-
Inoxfucine could also realize special forgings according customer’s drawings
Special Pieces
-14-
Special Pieces
-15-
Materials
Duplex and Superduplex
F 51, F 53, F 55
Austenitic Stainless Steels
F 304, 304L 304H, F 316, 316L, 316H, 316 LN, 316 Ti, WM5, 316 L Urea Grade, F321, 321H, F 347, 347H, XM19, F 44, F 310 MoLn
Ferritic and Martensitic Stainless Steels
410 A/B, 420, 431, 430, F 6 NM, F 91, 17-4 PH
Carbon and Low Alloy Steels
A 105, LF2, A 765, F1, F 5, F11, F12, F 22
Nickel / Nickel Alloys
N04400, N06600, N06625, N08020, N08800, N08810, N08811, N08825, N10276, N06022, N08904, N07718, N07750, N05500, N06059
Titanium Alloys
B 381 F1, F2, F3, F5, F7, F12
-16-
ASME AISI GOST
CSN DIN EN
SIS UNI EN
Most common certifications used
Materials
ASTM UNS SAE
AMS
VD TUV
BRITISH ST
AF NOR EN
STOOMWEZEN
-17-
Equipments
Inoxfucine’s Equipments include:
5 PRESSES with capacity between 500 tons and 1500 tons
5 ROUND ROLLING MILLS for RINGS (OD max 2.000 mm, H 900
mm, weight max 3000 kg), 1 rolling machine for SHAPED PIECES
1 COMPRESSED AIR HAMMER (2.000 kg)
7 FORGING FURNACES (2000 kw max)
7 HEAT TREATMENT FURNACES (3 electric, 4 gas)
13 CUTTING MACHINES (until 1000 mm OD)
LIFT TRUCKS equipped with bit pincers in order to load and
download the furnaces
FORKLIFTS for warehouse
WATER TREATMENT TANKS
WELDING/TIG MACHINES
LATHES
-18-
Heat Treatment
Inoxfucine has furnaces and water tanks of various sizes and
capabilities to cover all the requirements of a proper heat
treatment. Following heat treatments are regularly performed
inside our plants:
- Annealing
- Normalizing
- Normalizing + Tempering
- Quenching and Tempering
- Solution annealing
- Solution Annealing + Age hardening
- Stabilizing
- P.W.H.T simulated
-19-
Quality and Laboratory
For Inoxfucine the high quality of the products and services are
the compulsory criteria to compete.
The large number of certifications supplied, together with the
stringent audits performed every day are a continuous tests to
measure quality and performance of our Company.
International approvals by independent certification associations
have made possible for our company to produce and supply
forgings all around the world.
Moreover we are an approved manufacturer for the Northern
European market according to the NORSOK M 650 rev 4
Our internal laboratory, equipped with modern technology,
performs final inspection tests according to the national and
international standards, under the supervision of the major
working inspection agencies such as ABS, BUREAU VERITAS,
DNV, GL, LLOYD’S REGISTER, RINA, TUV
-20-
Quality and Laboratory
NON DESTRUCTIVE TESTS:
Technicians with SNT-TC1-1A LEVEL 2 and EN 473-03
qualifications execute the non-destructive tests, as follows
- UT - Liquid Penetrant test - Magnetic particle test - Quantometric test - PMI - Check analysis - Visual and dimensional test
EQUIPMENT FOR MECHANICAL TESTS:
- 2 Tensile testing machines - 2 Impact testing machines - 3 Durometers 3000/10 - 1 Instruments to read Brinell values - 1 Furnace for Hot Tensile test
Conaco Strainers
-21-
Conaco Strainers
Conaco Strainers
-22-
Conaco Strainers
-23-
Contacts
www.inoxfucine.it
info@inoxfucine.it
ACCOUNTING dpt: ext 615 CUSTOMER CARE: ext 638-647
SALES dpt: ext 618-619 CERTIFICATION: ext 613-630
PRODUCTION dpt: ext 627 SHIPPING dpt: ext 640
-24-
International Certified Quality Standards