Power-Aware Scheduling of Virtual Machines in DVFS-enabled Clusters Gregor von Laszewski 1, Lizhe...

Post on 03-Jan-2016

218 views 0 download

Tags:

Transcript of Power-Aware Scheduling of Virtual Machines in DVFS-enabled Clusters Gregor von Laszewski 1, Lizhe...

Power-Aware Scheduling of Virtual Machines in DVFS-enabled Clusters

Gregor von Laszewski1, Lizhe Wang2, Andrew J. Younge2, Xi He2

1: Pervasive Technology InstituteIndiana UniversityBloomington, IN

2: Service Oriented Cyberinfrastructure LaboratoryRochester Institute of Technology

Rochester, NY 1

Outline

2

• Introduction• Virtual Machines• Power-Aware Computing• System Model• Scheduling Algorithm

– Implementation– Simulation

• Conclusion

Power Consumption in Data Centers

• Currently it is estimated that servers consume 0.5% of the world’s total electricity usage.– Approx. 1.2% when data center systems are factored

in• Server energy demand doubles every 4-6 years.• This results in large amounts of CO2 produced by

burning fossil fuels.• What if we could reduce the energy used with a

minimal performance impact?

3

Virtualization

• A Virtual Machine (VM) is a software artifact that executes other software as if it was running on a physical resource directly.

• Typically uses a Hypervisor or VMM which abstracts the hardware from an Operating System

• Enables multiple OSs to run simultaneously on one physical machine.

4

Virtualization in a Cluster

• A compute cluster provides various virtual machine templates.

• When a job arrives at the cluster, the cluster scheduler allocates the job with a pre-configured virtual machine then starts it on compute nodes.

• The job is executed in the virtual machine.• After the job is completed, the virtual machine is

shutdown.

5

Advantages of Virtualization

• On-demand creation and customization• Enhanced system usage• Legacy support for specific software • Increased administrative control for users• Cluster site autonomy• Guaranteed quality of service

6

Power-Aware Clusters

• A Power-aware cluster is a compute cluster where nodes support multiple power and performance modes.– Adjustable frequency, voltage, sleep state, etc– Lower the power consumption of the CPU when its

not needed• We can Dynamic Voltage and Frequency Scaling

(DVFS) methods to control processor power consumption– Intel SpeedStep Technology– AMD PowerNow

7

Energy Model

Power consumption can be estimated as:

• WasWhere v is the processor voltage and s is the

operating frequency at time period t

8

Cluster Model

A Processing Element is defined as:

Where op is the operating point, v is the voltage, and s is the processor speed.

Then we can define a cluster C as a collection of k PEs

9

VM Model

A VM is defined as:

Where s is the speed with requirement r and t is the time, both as the execution time and the startup time required.

Then we can define a set of i VMs as:

10

Research Issue

We need a function f

That schedules VMs to PEs at a certain operating point in such a way that minimizes the overall power consumption of the cluster C

11

Main Idea

12

Algorithm 1

• Set all PEs running to the lowest voltage and processor speed, smin

• Define pek.sa as the available processor speed if the processor does not change its operating point. Since no virtual machine are initially scheduled, pek .sa is initialized with smin

• pek. s∇ is the available PE speed when pek is operated to a highest level voltage from the current voltage level. pek. s ∇ is initialized with smax

• At a predefined interval, reduce power profiles with Algorithm 3 and schedule all incoming VMs with Algorithm 2 13

Algorithm 2

• Sort the incoming virtual machine requests in decreasing order of required processing frequency, vmi .sr so the VMs with higher requirements are scheduled first

• Find a pen with the most available processor speed

• If this PE meets the needs of the VM, schedule it on pen

• Continue for all VMs to be scheduled.

14

Algorithm 2 (cont)

• If vmi cannot be scheduled, take the pen with the maximum potential speed, we raise the speed the lowest possible level to satisfy the requirements of vmi

• Schedule vmi on pen

15

Algorithm 3

• During the interval, a VM may finish execution

• If it does, try to lower the operating point of pen to the lowest possible point which meets the requirements of all currently running VMs on pen

16

Validation

• Need to validate the potential of our algorithm– Implement the algorithm within a small VM

cluster– Simulate VMs scheduled on a cluster with the

algorithm

17

OpenNebula

• OpenNebula is a virtual infrastructure manager for data centers

• The standard scheduler is independent of the other components

• We can replace this scheduler with our own Power-aware scheduling algorithm

• Then adjust the frequency at the Hypervisor level

18

Xen Power Management

• Xen Hypervisor to change the power consumption – Use the Xen 3.3.4-unstable power management tools– Within Dom0, we can control each core’s operating

frequency using xenpm• Intel Nehalem Quad Core processors

– Can set frequency to 1.6Hz, 1.86Ghz, 2.13GHz, 2.53GHz, or 2.66Ghz

– Uses Hyperthreading which provides 8 virtual cores, each of which can run a VM instance

• Measure power consumption using a Watts-UP power meter

19

Power Consumption Variations

20

Performance Impact of VMs

21

DVFS Simulation

• Simulate a test cluster with 10, 20, 30, 40, and 50 compute nodes– Each node was simulated as a Pentium M at

1.4ghz• Simulate 100, 200, 300, 400, and 500 virtual

machines deployed on the cluster– VMs randomly pick frequency requirements

in .100Mhz intervals• Use the DVFS scheduling algorithm to

schedule VMs on nodes22

DVFS-enabled Cluster Scheduling

23

Overall operating point distribution

24

• Simulate scheduling 200 VMs on 40 PEs

• In round 1, most PEs run at the lowest voltage

• Over subsequent rounds, the operating points scale up as the utilization rises

• The overall distribution varies widely, with the majority of the time running below the maximum operating frequency

Conclusion

• Recent trend to consolidate resources into a virtualized data center.

• There is a need to address the power consumption in these data centers.

• We can use DVFS technologies when scheduling VMs to conserve power whenever possible.

• Both experimental and analytical results show our algorithm its possible to reduce power consumption within a cluster environment.

• Further research is needed to reduce the energy consumed in data centers

25

Questions?

26

Appendix

27

Cloud Computing

• Distributed Systems encompasses a wide variety of technologies

• Grid computing spans most areas and is becoming more mature.

• Clouds are an emerging technology, providing many of the same features as Grids without many of the potential pitfalls.

From “Cloud Computing and Grid Computing 360-Degree Compared” 28

29

Framework

VM scheduling on Multi-core Systems

• There is a nonlinear relationship between the number of processes used and power consumption

• We can schedule VMs to take advantage of this relationship in order to conserve power Power consumption curve on an Intel

Core i7 920 Server (4 cores, 8 virtual cores with

Hyperthreading)Scheduling

0 1 2 3 4 5 6 7 890

100

110

120

130

140

150

160

170

180

Number of Processing Cores

Watt

s

30

31

Node 1 @ 170W

VM

VM

VM

VM

VM

VM

VM

VM

Node 2 @ 105W

Node 3 @ 105W Node 4 @ 105W

Node 1 @ 138W

VM

VM

VM

VM

VM

VM

VM

VM

Node 2 @ 138W

Node 3 @ 138W Node 4 @ 138W

485 Watts vs. 552 Watts

VS.

Minimal VM Image

• Easier to slim down a fully functional distro than to create one from scratch

• Selected Ubuntu Linux– Jaunty 9.04– Minimal install site– Package management software

(aptitude)– Continuing support

Ubuntu Linux

Cloud Ubunt

u

Vs.

VM Image Design 32