Post on 26-Mar-2015
Packaging Services Update
Logistics Services
Presented By:
Marc Flynn, LLWR Logistics Services Manager (RAMTUC Chairman)
April 2012, Reghed
Packaging Services
– LLWR Packaging Services Team– LLWR Packaging Services Scope– LLWR Packaging Services - Request for services process – Packagings available and associated equipment (sale)– Packagings available and associated equipment (hire)
– 2012/13 new Packagings and equipment– Package Support Services– Package Operational Guidance Documentation– New Container Release Protocol
Integrated Logistics Services Team
Tel – 019467 70301transportandlogistics@llwrsite.com
Head of Waste Services
Martin Walkingshaw
Logistics Services Manager
Marc Flynn
Transport Services ManagerAlison
Fotheringham
Packaging Services Manager
Barry Mellor
Transport Services SpecialistLaura Bell
Transport Services SuportGillian Rogers
Packaging Services Engineer
Simon Williams
Packaging Services Engineer
VN
Packaging Services Specilaist
Mark Williams
Packaging Services
SpecilaistrGillian Spence
Packaging Services Support
Elaine Dobbin
Packaging Quality Inspector
Jason Dodd
Packaging Quality Inspector
Bert Clark
Package Design Authority
Bob Millington
Packaging Design Engineer
VN
DRS Head of Commercial
Beverly Stobhart
DRS Account Manager
Carmen Little
DRS Operations Surele.Wykes
DRS OperationsAngela.Hoskins
Packaging Project Engineer
Bill Robson
Packaging Services - Scope
err
• Package/Ancillary/Stillage Design & Manufacture• Container Licensing Management (SA & CA)• Licensed Container Supply
- Re-usable (rental)
- Disposal (supply)
- Used Disposable (supply and buy back)
- Container Operational Support, CSC Inspections, Leak tests• Low Cost Disposable Receptacle/Package Supply• Container spares (Supply)• Container Repair (assessment to full repair)• Waste loading Assessment Service (WLPs)
Services ProcessLogistics Services process integrates Packaging Services and Transport Services
Customer accepts quote and forwards
P/O Number to LLWR with signed
quotation
LLWR authorises & sends LSQ to
Customer
Customer Response
Accepts
LEN Recieved
Rental or Buy?
LLWR produces quote for rental
LLWR produces quote for purchase
Rental Buy
Generate Ref No for LSE form &
advise Customer
Quote on Hold until LLWR/DRS
populate transport section
Delivery Required
Yes
No
Container released (and Delivered if T
requested)LEN Form LSQ FormLEN Form
LLWR Packaging Offered Today
TC05 0017A via SL TC10
TC02 TC24 TC01 & TC03
TC01 – Re-Licensed with 3 x operational systems
1. Single use disposable option
2. 3 x Multi-use option (2/3 pay load) with no restrictions other (than informing LLWR on usage and usual WLP requirements)
3. New ACEP option (2/3 pay load) for multi-use with restrictions on loading arrangements
TC01 developments
LLWR IP-2 ISO Container Supply (TCxx)• Successfully re-tested TC01, TC08 & TC03
designs at 2 x new manufacturers over the past 12 months
• New Container Manufacture and Design Support Framework Contract in place - 3 x container manufacturers
– W H Davis Containers
– Bootle Containers
– Yorkshire Marine Container Solutions
• Sustainability of Container Supply – healthy!
Transport & Logistics
Container Release Process Container Release Process post acceptance of quote
when arranging own transport1.Send request to collect containers in writing (email) to LLWR
2.LLWR will prepare a Container/Ancillary Equipment Release Form
Note – LLWR has 3 x Container manufactures located in different areas
3.LLWR will prepare a Container/Ancillary Equipment Release Form
4.Copy of the Release Form is sent to the applicable Manufacturer and Customer
5.Customer must provide copy of the Release Form to their Driver
6.Upon arrival at Manufacturer, Release Form is checked to aligns with the Release Form emailed to the Manufacturer from LLWR
7.Containers will be loaded onto the conveyance for transport
Warning – Without possession of a Release Form Containers will not be released from the manufacturer
Packaging in progress – 2012/13
TC02 Waste Boxes; full size & half size & quarter size TC14 IP-2 Drums (liquid and
solid)
Packaging in progress – 2012/13
TC02 Optimum Capacity half size Stillage 15te
TC02 Optimum Capacity full size Stillage (and Drum variant) 29te
Packaging developments for VLLW
VLLWPackaging
Packaging in progress – 2012/13
TC11 SSP Delivery System
License Status
Packaging in progress – 2012/13
TC16 NEW - Oversize IP-2 Powered Recovery Container with variable internal restraint system
Packaging Support - Guidance Notes 1- 9PAA/GN01 - IP-2 ISO CONTAINER CSC INSPECTION AND SEAL LEAKAGE TEST – uprevd
PAA/GN02 - IP-2 ISO CONTAINER DIRECT POUR ENCAPSULATION – uprevd
PAA/GN03 - STUD REPAIR GUIDANCE
PAA/GN04 – SECURING ITEMS IN TC01, TC03 GUIDANCE - Schedules 1 – 11 - 11 X STANDARD LOADING PLANS – uprevd
PAA/GN05 – MINIMUM MONITORING REQUIRMENTS FOR IP-2 ISO CONTAINERS uprevd - Schedule 1 - TC02 MIMUMUM MONITORING
PAA/GN06 – OPERATIONAL QUALITY PLAN FOR VLLW CONSIGNMENT
PAA/GN07 - DRUM SECURING IN FULL HEIGHT IP-1 ISO CONTAINERS – IN PREP
PAA/GN08 – OPERATIONAL QUALITY PLAN FOR TC02
PAA/GN09 – OPERATIONAL QUALITY PLAN FOR TC01 & TC03
End