4

•

Packaging - Processing

Bid on Equipment 1-847-683-7720

www.bid-on-equipment.com

LABMASTER II MODEL TS 2510* Quantify Mixing Parameters For You and Your Computer • RS-232 port permits feeding data to your

lab computer • Speed Display 20-1800 RPM • Process Watts Display • Timer Display (counts up or down) • Gallons Per Minute Readout for three

different impellers (Impellers are provided)

• Optional Temperature Probe-Readouts in °F or °C

• User defined acceleration/deceleration rates (min. default set by factory)

• Analog input port (0-5V) for peripheral data collection

• Thru-Shaft Design for infinitely variable impeller position

• Direct Drive • Quick-Disconnect Chuck • Overload Indicator and Alarm • 1/10 HP, 115V, 50/60 Hz • Light-weight Chemically Resistant,

Composite Housing • Universal Mounting Clamp (use with ring

stand or tank rim) • Tactile and audible feedback, sealed

membrane control panel • Fuse Protection for severe overload • Minor overload protection via automatic

speed level control *Patent Pending

LABMASTER MODEL TSR 1516 This 1/15 HP high torque model has a right angle drive and variable speed. Everything is standard. • LED readouts for RPM, watts and

gallons per minute (pumping capacity) for three different impellers

• Timer (Counts down only) • Membrane Switch Panel • Overload Indicator and Alarm • Shaft Angle Positioning with

Inclinometer (0-45°) • Thru-Shaft for infinitely variable turbine

position • Fuse Protection • Quick-Disconnect Chuck Design • Tube Suspension Mounting (Tank Clamp

Model also available) • 50-500 RPM • 3 different impellers (A-310, A-100,

R-100) • Cat. No. 809403 • Cat. No. 829398 (TSR 1516 TM)

UNIVERSAL CLAMP (Add U to mixer model num-ber when ordering.) Permits clamping mixer to container wall or ring stand as needed.

010•41-bei RING STAND CLAMP Heavy duty, recommended for all LabMaster models.

Model No. Description Cat. No."

TS 2510 as described above 832048 TSM 2510 as described above with metric

displays832050

TS 2520 as above with 220V, 50/60 Hz 832049 TSM 2520 as above with 220V, 50/60 Hz

and metric readouts832051

TS 2010 as above without temperature probe, RS-232 port and analog

832044

(0-5V) input port TSM 2010 Same as 2010 with metric

readouts832046

TS 2020 Same as 2010 with 220V, 50/60 Hz 832045 TSM 2020 Same as 2010 with 220V,

50/60 Hz and metric readouts832047

DS 1010 1/30 HP No thru-shaft. No 832052 RS-232 port. No analog input port

DSM 1010 Same as DS 1010 with metric readouts

832054

DS 1020 Same as DS 1010 with 220V, 50/60 Hz

832053

DSM 1020 Same as DS 1020 with metric readouts

832055 rag

Precision Mixing Instruments •

LABMASTER MODEL MSV-1500 1/15 HP with Variable Speed Remote Control The Model MSV-1500 is suitable for use in enclosed environments such as vapor hoods, with variable speed control positioned conveniently on the outside. • Remote Variable Speed Control • 1/15 HP-Direct Drive • Hand Chuck • Thru-Shaft Design for infinitely variable turbine position

• Fuse Protection • Yoke Mounting or U Mount • A-310 Impeller • On/Off indicator light • 180-2300 RPM • Cat. No. 869000 • Cat. No. 869001

(MSV 1500 U as pictured)

LABMASTER MODEL MS 3000 1/30 HP Fixed Speed with Direct Drive. Standard Features include: • Hand Chuck • Bracket Clamp Attachment • Fuse Protection • A-310 Impeller • On/Off indicator light • 1800 RPM • Cat. No. 809408 • Cat. No. 830162

(Complete mixer with universal clamp - Model MS 3000 U)

LABMASTER MODEL MSR 3002 1/30 HP High Torque Stirrer. Fixed Speed with Right Angle Drive. Standard features include: • Hand Chuck • Bracket Clamp Attachment • Fuse Protection • On/Off indicator light • A-310 Impeller • 500 RPM • Cat. No. 829249 • Cat. No. 830163 (Complete mixer with

universal clamp - Model MSR 3002 U)

•

Pilot Plant Kit The perfect accessory kit for all pilot plants. It includes: • LIGHTNIN Pilot Plant

Manual • 2 extra shafts • Pyrex Shaft and Impeller • A-310 Impellers (2 sizes) • R-100 Impeller • R-500 Impeller • A-200 Impeller

• A-100 Impeller • Calibrated colored beads

for visual mixing/flow indication.

• Plus — the final word on mixing — "Fluid Mixing Technology" — a book by Dr. James Oldshue

Packaging - Processing

Bid on Equipment 1-847-683-7720

www.bid-on-equipment.com