NSR IOCL Bottom Loading Tanker - Technical Specification

Post on 12-Aug-2015

650 views 6 download

Transcript of NSR IOCL Bottom Loading Tanker - Technical Specification

NSR IOCL Bottom Loading Tanker

Introduction

• We are happy to show you exactly what & where the different components in a bottom loading tanker according to the INDIANOIL Technical Specifications is found.

Bottom Loading API Adaptor ( AL Construction )

Dust Cap (Aluminum)

Air Operated Sequential Vapour Recovery Vent (AL Construction)

Pneumatically Operated Internal Emergency Valve ( AL Construction )

Sump/Mounting Flange ( Mild Steel )

Female Gravity Discharge drop Coupler with hose (API to Camlock)

Vapour Recovery Adaptor Valve ( AL Construction )

Vapour Recovery Adaptor Cap

Vapour Coaming Pipe line

Aluminium Chequered Plate walk way

The tanker is completely sealed on top with aluminium chequered plate to avoid pilferage of material and sparking.

Vapour Dump Vent (AL Construction)

Manhole Assembly (AL Construction)

Pressure / Vacuum Vent on 9 inches emergency hatch

Hatch – Closed Hatch – Open

Vapour hose for vapour vent

Two wire/ Five wire Overfill sensor

Truck Plug/Socket Two wire /Five wire Optic socket with cap

Pneumatic Control Panel

Air interlock valve

Air Filter Regulator

Pressure Switch

Electro pneumatic Shutdown push Button

SWITCH 1 (FRONT) SWITCH 2 ( REAR)

PVC Tubing

PVC Tubing is used for all pneumatic lines in the tanker , an outside protection layer is provided to prevent it from physical damage.

PV Valve ( Top Loading Only )

Please Note :-According to Petroleum and Explosive Safety Organization ( PESO ) department , PV Valve should be used only for top loading tankers and should not be used for bottom loading tankers

Fusible Plug / Vent valve ( Top Loading Only )

Please Note :-According to Petroleum and Explosive Safety Organization ( PESO ) department , Vent Valve should be used only for top loading tankers and should not be used for bottom loading tankers.

Dip Scale

Fire extinguisher

Battery Cut off switch

The cut-off switch is found inside the cabin behind the driver seat , to turn off the vehicle battery when required

Thank You

N.S.Rama Rao Body Works Website : www.nsrrbw.comEmail : info@nsrrbw.comPh : 044-22770008Fax : 044-22770071