Post on 30-Oct-2014
Eddy Current Probesfor Nondestructive Testing
OLYMPUS NDTOlympus NDT is a leading global manufacturer of innovative nondestructive testing instruments that are used in industrial and research applications ranging from aerospace, energy, automotive, and electronics to manufacturing. Olympus NDT instruments contribute to the quality of products and add to the safety of infrastructure and facilities. They include flaw detectors, thickness gages, bond testers, pulser-receivers, transducers, and advanced systems for inline applications. Our leading edge technologies include ultrasound, ultrasound phased array, eddy current, and eddy current array.
Olympus NDT offers products and services from several high quality brands: R/D Tech®, Panametrics-NDT™, NDT Engineering, Sonic®, and Nortec®. For many decades these brands have earned excellent reputations for providing cost-effective solutions and excellent support and customer service.
Based in Waltham, Massachusetts, USA, the company has sales and service centers in all principal industrial locations worldwide. Visit www.olympusNDT.com for applications and sales assistance near you.
NORTEC eddy current probes are designed and manufactured by Olympus NDT in Kennewick, WA, USA. We have a dedicated staff of probe engineers available to help you with your probe requirements - from standard probes to application-specific and custom designed probes. Optimal performance in your eddy current test is insured by selecting the right type of probe. In addition to coil size and frequency, the physical shape of a probe contributes to a successful test. Flaw location and part geometry determine whether a standard probe can be used or if a custom design is needed. This catalog features most of our standard design probes that are available in a wide range of diameters, frequencies, and connector styles.
Tel: 509-736-2751 Fax: 509-735-4672nortecsonic@olympusNDT.comwww.olympusNDT.com
Primary aPPlicaTioNs For sTaNDarD Probes
SuRfaCE pRObES are used for discovering flaws both on and below surfaces. Available in a broad frequency range, their diameters are usually large for accommodating lower frequencies or scanning large areas.
pENCil pRObES have smaller diameter housing coils built for higher frequencies. Applications are usually limited to surface flaws because of higher frequency.
RighT aNglE pENCil pRObES reach areas inaccessible to pencil probes. They normally employ the same coils and frequencies as pencil probes.
haNd hEld bOlT hOlE pRObES have coils located at right angles to the probe direction, and are rotated by hand with the fastener removed. Standard and custom diameters are available with absolute and differential coils.
SCaNNER dRivEN bOlT hOlE pRObES are used with mechanical devices for automatically rotating and indexing into hole. Absolute and differential coils are common at higher frequencies of 500 kHz and 2 MHz. They bear close tolerances and are highly reliable.
dONuT pRObES are designed to inspect aircraft fastener holes with fasteners in place, and can be used on uneven fastener holes. Various inside/outside diameters and frequencies for different size fasteners and differing materials are available.
SlidiNg pRObES are designed to inspect aircraft fastener holes with fasteners in place, at higher scan rates than donut probes. Common sizes and frequencies using the reflection coil techniques are often applied in major airframe inspection requirements.
id pRObES usually have a frequency range of 5 kHz to 100 kHz made in absolute or differential configurations. Many body styles are available depending on the inside surfaces of tubes to be inspected. Most probe diameters are made to meet customers’ requirements.
Od pRObES are usually designed for a frequency range of 5 kHz to 100 kHz and available in absolute, differential and switchable configurations. Tubes to be inspected are passed through the coil for absolute or differential flaw detection at high speeds.
Nortec Eddy Current Probes - Contents
Eddy Current Probe Selection . . . . . . . . . . . . . . .2
Eddy Current Probe Design . . . . . . . . . . . . . . . . .2
PowerLink™ Technology . . . . . . . . . . . . . . . . . .3
Rotating Scanner Probes . . . . . . . . . . . . . . . . . .4Bolt Hole Probes for Spitfire, MiniMite (4 pin Fischer), Hocking and Rohmann Scanners . . . . . . . . . . . . . . . . . . . 4
Bolt Hole Probes for Spitfire, MiniMite (4 pin Fischer), Hocking and Rohmann Scanners . . . . . . . . . . . . . . . . . . . . 5
Bolt Hole Probes for RA19, RA2000 and MiniMite (4 pin Lemo) Hand Held Scanners . . . . . . . . . . . . 6
Bolt Hole Probes for RA19, RA2000 and MiniMite (4 pin Lemo) Hand Held Scanners . . . . . . . . . . . . 7
Special Scanner Probes for RA19, RA2000, and MiniMite (4 pin Lemo) Hand Held Scanners . . . . . . . . . . . . 8
Special Scanner Probes for Spitfire, MiniMite (4 pin Fischer), Hocking and Rohmann Scanners . . . . . . . . . . . . . . . . . . . . 9
Bolt Hole Probes for Nortec® PS-5 Stainless Steel and Aluminum Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Bolt Hole Probes for Nortec® PS-5 Stainless Steel and Aluminum Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Bolt Hole Probes for PS-2 and PS-3 Scanners . . . . . . . . . . 12
Non-Contact Bolt Hole Probes for RC RECHII Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bolt Hole Probes for PS-4 Scanner . (Contact and Non-Contact) . . . . . . . . . . . . . . . . . . . . . . . 14
Scanner Probe Kits . . . . . . . . . . . . . . . . . . . . . .15RA19, RA2000 and MiniMite (4 pin Lemo) Bolt Hole Probe Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Detachable Bolt Hole Probes . . . . . . . . . . . . . .16Standard Manual Bolt Hole Probes, Absolute and Differential . . . . . . . . . . . . . . . . . . . . . . . . . 16
PowerLink™ Manual Bolt Hole Probes, Absolute and Differential . . . . . . . . . . . . . . . . . . . . . . . . . 17
3551 Pencil Probes . . . . . . . . . . . . . . . . . . . . . .18Nortec® 3551 Pencil Probes . . . . . . . . . . . . . . . . . . . . . . 18
Nortec® 3551L PowerLink™ Pencil Probes . . . . . . . . . . . 19
Detachable Pencil Probes . . . . . . . . . . . . . . . . .20Nortec® Standard Detachable Pencil Probes . . . . . . . . . . 20
Nortec® PowerLink™ Detachable Pencil Probes . . . . . . . . 21
Nortec® Standard Detachable Metal Shaft Pencil Probes . . . . . . . . . . . . . . . . . . . . . . . . 22
Nortec® PowerLink™ Detachable Metal Shaft Pencil Probes . . . . . . . . . . . . . . . . . . . . . . . . 23
Detachable Surface Probes . . . . . . . . . . . . . . .24Nortec® Standard Detachable Surface Probes . . . . . . . . . . 24
Nortec® PowerLink™ Detachable Surface Probes . . . . . . 25
Ring/Donut Probes . . . . . . . . . . . . . . . . . . . . . .26Nortec® Standard Ring/ Donut Probes (SPO Series) . . . . . . 26
Nortec® PowerLink™ Ring/ Donut Probes (SPO Series) . . . 27
Nortec® Detachable Ring/ Donut Probes . . . . . . . . . . . . . . 28
Nortec® PowerLink™ Detachable Ring/ Donut Probes . . . 29
Sliding Probes . . . . . . . . . . . . . . . . . . . . . . . . . .30Nortec® Standard Sliding Probes . . . . . . . . . . . . . . . . . . . 30
Nortec® PowerLink™ Sliding Probes . . . . . . . . . . . . . . . . 31
Conductivity Probes . . . . . . . . . . . . . . . . . . . . .32Nortec® Standard Conductivity Probes . . . . . . . . . . . . . . . 32
Nortec® PowerLink™ Conductivity Probes . . . . . . . . . . . . 33
ID Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Nortec® ID Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
OD Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Nortec® OD Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
General Purpose Probe Kits . . . . . . . . . . . . . . .36
Documentation . . . . . . . . . . . . Inside Back Cover
� www .olympusNDT .com
Eddy Current Probes
GENERaL CONSIDERaTIONS
Likeothernondestructivetestingmethods,eddycurrentcanperformavarietyoftestsdependingonthetypeofprobebeingused.Optimalperformancethereforeisensuredbycarefulprobeselection.Thiscatalogoffersinformationandspecificationsforselectingprobestomeetyourinspectionrequirements.
INSTRumENTS
Impedance Plane Display EC instrumentstakethegreatestadvantageofthemanydifferentprobedesignsavailable.Mostcanbeusedwithbridgeandreflectionprobetypes,displayingphaseandamplitudechanges.Unitsfeaturingenhancedfiltering,frequencyrange,sensitivityandrecordingshouldbeconsideredforadditionalversatility.
maTERIaL aND TEST REquIREmENTS
ThematerialforinspectionoftendetermineswhetherECcanbeusedornot.Nonmagneticconductivematerialrangingfrom.6%IACSto110%IACSoffersthebestopportunityforasuccessfulECtest.Testcriteriaarebasedonpenetrationdepth,sensitivity,signaltonoiseratioandscanspeed.
Detectableflawsize, resolutionandaccuracy requirementsmustalsobedetermined.Eddycurrent is traditionallyused todeterminematerial thickness,non-conductivecoating thickness,conductivityandplatingmeasurement,andcracks.Crackdetectionofsurfaceandsubsurfaceflawsisthemostpopularapplication.
Frequencyoftheinstrumentandprobeisdecidedbythematerialbeinginspectedandthesizeofthedefectsrequestedfordetection.TheNortec® EC Slide Rule can be of assistance in defining this test parameter by calculating the best depth ofpenetration,flawangleandfrequency.
PROBE SELECTION
Advancededdycurrentinspectionrequirestheuseofmanydifferentcoilconfigurations.Absoluteanddifferentialcoilsareavailableinbothbridgeandreflectiondesigns.Dependingonthetest,someareverysmallindiameterandotherscanbequitelarge.Acompromiseisusuallymadetogivethebestdepthofpenetration,greatestsensitivitytothesmallestdefects,andsmallestcoildiameter.
Inadditiontocoilsizeandfrequency,thephysicalshapeofaprobecontributestoasuccessfulECtest.Flawlocationandpartgeometrydeterminewhetherastandardprobecanbeusedorifacustomdesignisneeded.Becausethecoilmustpassovertheflaworbeincloseproximitytoit,theprobebodyrequiresaccurategeometricspecifications.
STaNDaRD PROBE DESIGNS
Cost,uniformityandavailabilitymakeitdesirabletousestandardprobeswheneverpossible.
Manystandarddesigns,withvariousfrequencies,diametersanddetectioncircuitsarelistedinthiscatalog.
nortecsonic@olympusNDT .com �
PowerLink™ Technology
Nortec®probeshavealwayssetthestandardforPerformance, rePeatability andQuality. ThenewgenerationofNortec® PowerLink™ Technology Sensors continuetobuildonitsreputation,nowprovidinganadditional“ValueAdded”capabilitywhenusedonStaveleyInstrumentsnewlineofeddycurrentinstruments.
POwERLINK™ EDDy CuRRENT PROBE FEaTuRES
•Automaticprobesetupincludingfrequency,gain,filters,horizontalandverticalposition,andalarmgates*.•Commoncableconfigurationallowsbothbridgeandreflectionprobestobeoperatedwiththesamecable.•Providesprobemodelnumber,serialnumber,screendataandspaceforcommentsonprintoutfromNortecneweddy
currentinstruments.•ProbesarebackwardcompatiblewithearlierversionsofNortec®instruments,liketheNDT-19eandNDT-�4,withthe
appropriatecable.•Probesarecapableofbeingreprogrammedastheneedarises.•PowerLink™canbebypassedtoallowtheprobetobeusedforanyapplicabletest.•LevelIIIprogramming(userprogrammable)supportedintheNortec®WorkStationandPowerStationinstrumentation.
*Any command featured in the instrument documentation may be programmed into the Nortec® PowerLink™probes.
SPECIaL PROBE DESIGNS*
Probesaredesignedtomeetcustomers’specialrequirements.TheaccuracyofadesignistestedbyplacingatestcoiloveradefectthroughmatchingsurfacesofthepartandtheECprobe.
Specialconfigurationsareusedinmanyapplications.Thebroadestrangeisemployedintheinspectionofaircraftenginesandairframes.ThesearedevelopedincooperationwiththecustomerandStaveleyInstruments’designers.
CustomdevelopmentisdoneroutinelyatOlympusNDT.Morethanthirtyyearsofexperienceinsolvingdifficultproblemsmaximizestheperformanceofinstrumentandprobe.OurunderstandingofImpedance Plane Analysis andtheperformanceofcertainECcomponents,areaguidetoexpectedresultsshownonanECinstrumentliketheNortec® 2000S.Impedancechanges(Z=X+R)aredirectresultsofchangesintheinductivereactanceorresistanceoftheECfieldinducedintoapart.Bothphaseandamplitudechangesareviewableontheinstrumentscreen.
Coilconfigurations,diameterandfrequencyaffectsensitivity,butcalibrationstandardsarealsoimportanttothesuccessoftheECtest.Calibrationstandardsareusuallybaseduponthematerialtobeinspectedcontainingknownnotchesofminimumsizefordetection.ThesenotchesaremadebyEDMprocessingforbestresults,butanarrowsawcutisadequateincertainsituations.ConductivitymeasurementscanbecertifiedtoN.I.S.T.
4 www .olympusNDT .com
Rotating Scanner Probes
BOLT HOLE PROBES FOR SPITFIRE, mINImITE (4 PIN FISCHER), HOCKING aND ROHmaNN SCaNNERS
SPO-5965expandingprobeshavealongwearingplastictipandstainlesssteelbackshell.Probesarefittedwitha4pinFischerconnector.TheseprobesaresimilartoSPO-5000probesbutareexpandedtotheirlargerdiameter.Theyaredesignedtoallowtheuseofthesameprobewhenholesarereamedtoalargerdiameter.Theyarealsousefultocheckunusualholesizeswhenafixedsizeprobeisunavailable.
Theseprobesuseareflectiondifferentialtypecoiloperatinginthe�00kHzto�MHzrange.Thismakesthemsuitableforaluminumstructuresaswellaslowconductivitymaterials.Theseprobesarealsoavailableinkits.
SPO-5965
How to Order:ProvidePartNumber,Description,andWorkingLength.
Otherdiametersandworkinglengthsavailable.ContacttheSensorsdepartmentat509-7�6-�751formoreinformation.
Probe Description Part number Working length (W/l)
SPO-5965.156-.187 9��0061 1.75” 44mm
SPO-5965.187-.�18 9�19979 1.75” 44mm
SPO-5965.�18-.�50 9�19980 �.00” 50mm
SPO-5965.�50-.�81 9�19981 �.00” 50mm
SPO-5965.�81-.�1� 9�1998� �.00” 50mm
SPO-5965.�1�-.�75 9�1998� �.00” 50mm
SPO-5965.�75-.4�7 9�19978 �.00” 50mm
SPO-5965.4�7-.500 9�19984 �.00” 50mm
SPO-5965.500-.56� 9�19985 �.00” 50mm
SPO-5965.56�-.6�5 9��0156 �.00” 50mm
SPO-5965.6�5-.687 9��0157 �.00” 50mm
SPO-5965.687-.750 9��0158 �.00” 50mm
SPO-5965.750-.81� 9��0159 �.00” 50mm
nortecsonic@olympusNDT .com 5
BOLT HOLE PROBES FOR SPITFIRE, mINImITE (4 PIN FISCHER), HOCKING aND ROHmaNN SCaNNERS
SPO-5�9�probesareahybridoftheoriginalRAprobesandarefittedwitha4pinFischerconnector.
Theseprobesuseareflectiondifferentialtypecoiloperatinginthe�00KHzto�MHzrange.Thismakesthemsuitableforaluminumstructuresaswellaslowconductivitymaterials.
Thestandardstock typesare identified in fractions (1/�”).Theactualprobesizeisdiameter.010”(.�5mm)belowthissizetoprovideclearance.Identifyspecialorderswithdecimals(.505”).Theseprobeswillbemadetothediameterorderedwithoutunder-sizing.Theworkinglength(WL)requiredshouldalsobestated.Theseprobesarealsoavailableinkits.
Rotating Scanner Probes
SPO-5393
How to Order:ProvidePartNumber,Description,andWorkingLength.
Otherdiametersandworkinglengthsavailable.ContacttheSensorsdepartmentat509-7�6-�751formoreinformation.
Probe Description Part Number Working Length (W/L)
SPO-5�9�5/��” 9�19999 �.00” 50mmSPO-5�9��/16” 9��0000 �.00” 50mmSPO-5�9�7/��” 9��00�5 �.00” 50mmSPO-5�9�1/4” 9�19987 �.00” 50mmSPO-5�9�9/��” 9�19988 �.00” 50mmSPO-5�9�5/16” 9�19989 �.00” 50mmSPO-5�9�11/�” 9�19990 �.00” 50mmSPO-5�9��/8” 9�19991 �.00” 50mm
SPO-5�9�1�/��” 9�1999� �.00” 50mmSPO-5�9�7/16” 9�1999� �.00” 50mmSPO-5�9�1/�” 9�19994 �.00” 50mmSPO-5�9�9/16” 9�19995 �.00” 50mmSPO-5�9�5/8” 9�19996 �.00” 50mm
SPO-5�9�11/16” 9�19997 �.00” 50mmSPO-5�9��/4” 9�19998 �.00” 50mm
6 www .olympusNDT .com
Ra Probes
How to Order:ProvidePartNumber,Description,andWorkingLength.
Rotating Scanner Probes
BOLT HOLE PROBES FOR Ra19, Ra2000 aND mINImITE (4 PIN LEmO) HaND HELD SCaNNERS
RAprobesaremadefromdurablestainlesssteelandarenon-contactprobes.Probesarefittedwitha4pinLemoconnector.
Theseprobesuseareflectiondifferentialtypecoiloperatinginthe�00KHzto�MHzrange.Thismakesthemsuitableforaluminumstructuresaswellaslowconductivitymaterials.
The standard stock types are identified infractions (1/�”).The actual probe size isdiameter .010” (.�5mm) below this size toprovideclearance.Identifyspecialorderswithdecimals(.500”).Theseprobeswillbemadetothediameterorderedwithoutunder-sizing.Theworkinglength(WL)requiredshouldalsobestated.Theseprobesarealsoavailableinkits.
Otherdiametersandworkinglengthsavailable.ContacttheSensorsdepartmentat509-7�6-�751formoreinformation.
Probe Description Part Number Probe Description Part Number Working Length (W/L)
RA-5/��S 9�16�90 RA-1/4S 9�0�484 0.�5” 6mm
RA-5/16S 9�0�486 0.�0” 8mm
RA-�/16 9�0�481 RA-1/4 9�0�48� 1.10” �8mm
RA-7/�� 9�0�48� RA-9/�� 9�16�91 1.10” �8mm
RA-5/16 9�0�485 RA-11/�� 9�16�9� 1.50” �8mm
RA-�/8 9�0�487 RA-1�/�� 9�16�9� 1.50” �8mm
RA-7/16 9�0�488 RA-1/� 9�0�489 1.50” �8mm
RA-9/16 9�16�94 RA-5/8 9�0�490 1.50” �8mm
RA-11/16 9�16�95 RA-�/4 9�16�96 1.50” �8mm
nortecsonic@olympusNDT .com 7
BOLT HOLE PROBES FOR Ra19, Ra2000 aND mINImITE (4 PIN LEmO) HaND HELD SCaNNERS
SPO-�564 expanding probes have a longwearingplastictipandstainlesssteelbackshell.Probesarefittedwitha4pinLemoconnector.
Theseareexpandableto�0%abovetheirnominaldiameter.Theyaredesignedtoallowtheuseofthesameprobewhenholesarereamedtoalargerdiameter. They are also useful to checkunusualholesizeswhenafixedsizeprobeisunavailable.
These probes use a reflection differentialtype coil operating in the 500 KHz to� MHz range.This makes them suitable foraluminumstructuresaswellaslowconductivitymaterials.These probes are also available inkits.
SPO-3564
How to Order:ProvidePartNumber,Description,andWorkingLength.
Rotating Scanner Probes
Otherdiametersandworkinglengthsavailable.ContacttheSensorsdepartmentat509-7�6-�751formoreinformation.
Probe Description Part Number Working Length (W/L)
SPO-�564.156-.187 9��0078 1.10” �8mm
SPO-�564.187-.�18 9�1715� 1.10” �8mm
SPO-�564.�18-.�50 9�17154 1.10” �8mm
SPO-�564.�50-.�81 9�17155 1.10” �8mm
SPO-�564.�81-.�1� 9�17156 1.50” �8mm
SPO-�564.�1�-.�75 9�17157 1.50” �8mm
SPO-�564.�75-.4�7 9�17158 1.50” �8mm
SPO-�564.4�7-.500 9�17159 1.50” �8mm
SPO-�564.500-.56� 9�17160 1.50” �8mm
SPO-�564.56�-.6�5 9�18785 1.50” �8mm
SPO-�564.6�5-.687 9�18786 1.50” �8mm
SPO-�564.687-.750 9�18787 1.50” �8mm
SPO-�564.750-.81� 9�18788 1.50” �8mm
8 www .olympusNDT .com
SPECIaL SCaNNER PROBES FOR Ra19, Ra2000, aND mINImITE (4 PIN LEmO) HaND HELD SCaNNERS
Theseprobesarefittedwitha4pinLemoconnectorandRAstylecoilsoperatinginthe500KHzto�MHzrange.Thismakesthemsuitableforfirstlayeraluminumstructures.
1. Surface inSPection ProbeS (raisedheadfasteners)-forinspecting the immediate area surrounding a raised headfastener.
�. Surface inSPection ProbeS -foruseindetectingflawsemanatingfromunderfastenerheads.Inspectioncanbedonewithflushfastenersinstalled.Probeusesballbearingguideforalignment.
�. Surface inSPection ProbeS (non counterSink)-forinspectingtheimmediateareaoutsideofanoncountersinkhole(fastenermustberemoved).Allprobeshaveapilotshaftforeaseinalignment.Fivesizesareavailable.
4. counterSink ProbeS-foruseindetectingflawsincountersinkswiththefastenersremoved.Allprobesaredesignedforthestandard100°countersinkunlessotherwisespecified.Allprobeshaveapilotshaftforeaseinalignment.Fivesizesareavailable.
Special Probes
How to Order:ProvidePartNumberandDescription.
Rotating Scanner Probes
Countersink Part Number Non-Countersink Part Number
SPO-40�1-5/��” 9�16594 SPO-�986-5/��” 9�16604
SPO-40�1-�/16” 9�16595 SPO-�986-�/16” 9�16605
SPO-40�1-7/��” 9�16596 SPO-�986-7/��” 9�16606
SPO-40�1-1/4” 9�16597 SPO-�986-1/4” 9�16607
SPO-40�1-5/16” 9�16598 SPO-�986-5/16” 9�16608
Surface Inspection Part Number Surface Inspection (Raised Fastener) Part Number
SPO-�906-(5/��to�/16”) 9�1660� SPO-4�08-5/��” 9�1660�
SPO-4�4�-(�/16to7/��”) 9�16599 SPO-4�07-5/16” 9�16601
nortecsonic@olympusNDT .com 9
Rotating Scanner Probes
Special Probes
How to Order:ProvidePartNumberandDescription.
SPECIaL SCaNNER PROBES FOR SPITFIRE, mINImITE (4 PIN FISCHER), HOCKING aND ROHmaNN SCaNNERS .
Theseprobesarefittedwitha4pinFischerconnectorandRAstylecoilsoperatinginthe500KHzto�MHzrange.Thismakesthemsuitableforfirstlayeraluminumstructures.
1. Surface inSPection ProbeS (raised headfasteners)- for inspecting the immediate areasurroundingaraisedheadfastener.
�. Surface inSPection ProbeS-foruseindetectingflaws emanating from under fastener heads.Inspectioncanbedonewithflushfastenersinstalled.Probeusesballbearingguideforalignment.
�. Surface inSPection ProbeS(noncountersink)-forinspectingtheimmediateareaoutsideofanoncountersink hole (fastener must be removed).Allprobeshaveapilotshaftforeaseinalignment.Fivesizesareavailable.
4. counterSink ProbeS- for use in detectingflawsincountersinkswiththefastenersremoved.All probes are designed for the standard 100°countersinkunlessotherwisespecified.Allprobeshaveapilotshaftforeaseinalignment.Fivesizesareavailable.
Countersink Part Number Non-Countersink Part Number
SPO-5787-5/��” 9����81 SPO-5786-5/��” 9����86
SPO-5787-�/16” 9����8� SPO-5786-�/16” 9����87
SPO-5787-7/��” 9����8� SPO-5786-7/��” 9����88
SPO-5787-1/4” 9����84 SPO-5786-1/4” 9����89
SPO-5787-5/16” 9����85 SPO-5786-5/16” 9����90
Surface Inspection Part Number Surface Inspection (Raised Fastener) Part Number
SPO-66�5-(5/��to�/16”) 9����91 SPO-5784-5/��” 9����9�
SPO-66�6-(�/16to7/��”) 9����9� SPO-5785-5/16” 9����94
10 www .olympusNDT .com
Rotating Scanner Probes
PS-5 Scanner Probes
How to Order:ProvidePartNumberandDescription.
BOLT HOLE PROBES FOR NORTEC® PS-5 STaINLESS STEEL aND aLumINum SCaNNERS .
Theseprobesaremanufacturedwithachoiceofbridge/absolute,bridge/differentialorreflection/differentialcoilsinavarietyoffrequencyranges.Theyhavealongwearingplasticexpandabletipandstainlesssteelbackshell.Theseprobesareexpandableto�0%abovetheirnominaldiameter.Theyaredesignedtoallowtheuseofthesameprobewhenholesarereamedtoalargerdiameter.Theyarealsousefultocheckunusualholesizeswhenafixedsizeprobeisunavailable.
Standardprobesareavailablewitha1.5”(�8mm)workinglength,otherworkinglengthsandprobediametersareavailable.
Theseprobesarealsoavailableinkits.Themostpopularkitislistedonpage14,otherkitsareavailable.
Probe Description Part # Probe Description Part # Probe Description Part #
PS5/100KHZ-500KHZ/A.156 9�176�8 PS5/500KHZ-�MHZ/D.156 9�17648 PS5/�00KHZ-1MHZ/RD.156 9�17569
PS5/100KHZ-500KHZ/A.187 9�176�9 PS5/500KHZ-�MHZ/D.187 9�175�0 PS5/�00KHZ-1MHZ/RD.187 9�17570
PS5/100KHZ-500KHZ/A.�18 9�176�0 PS5/500KHZ-�MHZ/D.�18 9�17649 PS5/�00KHZ-1MHZ/RD.�18 9�17571
PS5/100KHZ-500KHZ/A.�50 9�176�1 PS5/500KHZ-�MHZ/D.�50 9�175�1 PS5/�00KHZ-1MHZ/RD.�50 9�1757�
PS5/100KHZ-500KHZ/A.�81 9�176�� PS5/500KHZ-�MHZ/D.�81 9�17650 PS5/�00KHZ-1MHZ/RD.�81 9�1757�
PS5/100KHZ-500KHZ/A.�1� 9�176�� PS5/500KHZ-�MHZ/D.�1� 9�175�� PS5/�00KHZ-1MHZ/RD.�1� 9�17574
PS5/100KHZ-500KHZ/A.�4� 9�176�4 PS5/500KHZ-�MHZ/D.�4� 9�17651 PS5/�00KHZ-1MHZ/RD.�4� 9�17575
PS5/100KHZ-500KHZ/A.�75 9�176�5 PS5/500KHZ-�MHZ/D.�75 9�175�� PS5/�00KHZ-1MHZ/RD.�75 9�17576
PS5/100KHZ-500KHZ/A.406 9�176�6 PS5/500KHZ-�MHZ/D.406 9�1765� PS5/�00KHZ-1MHZ/RD.406 9�17577
PS5/100KHZ-500KHZ/A.4�7 9�176�7 PS5/500KHZ-�MHZ/D.4�7 9�175�4 PS5/�00KHZ-1MHZ/RD.4�7 9�17578
PS5/100KHZ-500KHZ/A.468 9�176�8 PS5/500KHZ-�MHZ/D.468 9�1765� PS5/�00KHZ-1MHZ/RD.468 9�17579
PS5/100KHZ-500KHZ/A.500 9�176�9 PS5/500KHZ-�MHZ/D.500 9�175�5 PS5/�00KHZ-1MHZ/RD.500 9�17580
PS5/100KHZ-500KHZ/A.5�1 9�17640 PS5/500KHZ-�MHZ/D.5�1 9�17654 PS5/�00KHZ-1MHZ/RD.5�1 9�17581
PS5/100KHZ-500KHZ/A.56� 9�17641 PS5/500KHZ-�MHZ/D.56� 9�175�6 PS5/�00KHZ-1MHZ/RD.56� 9�1758�
PS5/100KHZ-500KHZ/A.59� 9�1764� PS5/500KHZ-�MHZ/D.59� 9�17655 PS5/�00KHZ-1MHZ/RD.59� 9�1758�
PS5/100KHZ-500KHZ/A.6�5 9�1764� PS5/500KHZ-�MHZ/D.6�5 9�175�7 PS5/�00KHZ-1MHZ/RD.6�5 9�17584
PS5/100KHZ-500KHZ/A.656 9�17644 PS5/500KHZ-�MHZ/D.656 9�17656 PS5/�00KHZ-1MHZ/RD.656 9�17585
PS5/100KHZ-500KHZ/A.687 9�17645 PS5/500KHZ-�MHZ/D.687 9�17657 PS5/�00KHZ-1MHZ/RD.687 9�17586
PS5/100KHZ-500KHZ/A.718 9�17646 PS5/500KHZ-�MHZ/D.718 9�17658 PS5/�00KHZ-1MHZ/RD.718 9�17587
PS5/100KHZ-500KHZ/A.750 9�17647 PS5/500KHZ-�MHZ/D.750 9�175�8 PS5/�00KHZ-1MHZ/RD.750 9�17588
nortecsonic@olympusNDT .com 11
Rotating Scanner Probes
PS-5 Scanner Probes
How to Order:ProvidePartNumberandDescription.
BOLT HOLE PROBES FOR NORTEC® PS-5 STaINLESS STEEL aND aLumINum SCaNNERS .
Probe Kit, PS5 AF Part # 9217666 NSN 6635-01-415-9099
Probe Kit, PS5 Absolute Part # 9230230
Probe Kit, PS5 Differential Part # 9230231
PS5/�00KHZ-1MHZ/RD.156 PS5/100KHZ-500KHZ/A.156 PS5/500KHZ-�MHZ/D.156
PS5/�00KHZ-1MHZ/RD.187 PS5/100KHZ-500KHZ/A.187 PS5/500KHZ-�MHZ/D.187
PS5/�00KHZ-1MHZ/RD.�18 PS5/100KHZ-500KHZ/A.�18 PS5/500KHZ-�MHZ/D.�18
PS5/�00KHZ-1MHZ/RD.�50 PS5/100KHZ-500KHZ/A.�50 PS5/500KHZ-�MHZ/D.�50
PS5/�00KHZ-1MHZ/RD.�81 PS5/100KHZ-500KHZ/A.�81 PS5/500KHZ-�MHZ/D.�81
PS5/�00KHZ-1MHZ/RD.�1� PS5/100KHZ-500KHZ/A.�1� PS5/500KHZ-�MHZ/D.�1�
PS5/�00KHZ-1MHZ/RD.�4� PS5/100KHZ-500KHZ/A.�4� PS5/500KHZ-�MHZ/D.�4�
PS5/�00KHZ-1MHZ/RD.�75 PS5/100KHZ-500KHZ/A.�75 PS5/500KHZ-�MHZ/D.�75
PS5/�00KHZ-1MHZ/RD.406 PS5/100KHZ-500KHZ/A.406 PS5/500KHZ-�MHZ/D.406
PS5/�00KHZ-1MHZ/RD.4�7 PS5/100KHZ-500KHZ/A.4�7 PS5/500KHZ-�MHZ/D.4�7
PS5/�00KHZ-1MHZ/RD.468 PS5/100KHZ-500KHZ/A.468 PS5/500KHZ-�MHZ/D.468
PS5/�00KHZ-1MHZ/RD.500 PS5/100KHZ-500KHZ/A.500 PS5/500KHZ-�MHZ/D.500
PS5/�00KHZ-1MHZ/RD.5�1 PS5/100KHZ-500KHZ/A.5�1 PS5/500KHZ-�MHZ/D.5�1
PS5/�00KHZ-1MHZ/RD.56� PS5/100KHZ-500KHZ/A.56� PS5/500KHZ-�MHZ/D.56�
PS5/�00KHZ-1MHZ/RD.59� PS5/100KHZ-500KHZ/A.59� PS5/500KHZ-�MHZ/D.59�
PS5/�00KHZ-1MHZ/RD.6�5 PS5/100KHZ-500KHZ/A.6�5 PS5/500KHZ-�MHZ/D.6�5
PS5/�00KHZ-1MHZ/RD.656 PS5/100KHZ-500KHZ/A.656 PS5/500KHZ-�MHZ/D.656
PS5/�00KHZ-1MHZ/RD.687 PS5/100KHZ-500KHZ/A.687 PS5/500KHZ-�MHZ/D.687
PS5/�00KHZ-1MHZ/RD.718 PS5/100KHZ-500KHZ/A.718 PS5/500KHZ-�MHZ/D.718
PS5/�00KHZ-1MHZ/RD.750 PS5/100KHZ-500KHZ/A.750 PS5/500KHZ-�MHZ/D.750
1� www .olympusNDT .com
Rotating Scanner Probes
BOLT HOLE PROBES FOR PS-2 aND PS-3 SCaNNERS .
The SA and SD scanner bolt hole probes are fitted with 4 pin Switchcraftconnectors and available with absolute or differential coils in bridgeconfiguration.
The SA type absolute probe has a shielded 100 kHz coil foraluminumstructures.SDtypedifferentialprobeshave500kHzshieldedcoilsforaluminumand/orlowconductivitymaterials,andprovideincreasedsensitivitytosmalldefects.
Otherfrequenciesareavailable.ProbebodymaterialisofblackDelrinunlessotherwisespecified.
example: 9216318 SD 16 Part# Absolute(SA) ProbeSizein“X”/64 Differential(SD)
Sa and SD Scanner Probes
How to Order:ProvidePartNumberandDescription.
How to Order Nonstandard Probes:example: SD r 0.325 500kHz 2” Absolute(SA) Add“R”ifcoil ProbeDiameter Frequency WorkingLength Differential(SD) isrecessed
Specialorderprobesshouldbeidentifiedwithsizeindecimals(0.505”)Workinglength(WL)requiredshouldbestatedifdifferentfromthestandard�.0”.Ifcoilisrecessedadd“R”.Note:Probesbelow0.160”areunshieldedandhavenoexpansionslotorcheeks.Probesbelow0.��0”havenoballend.
*Otherdiametersandworkinglengthscanbemadetospecialorder.StandardfrequencyrangeforSAabsoluteprobesis100KHzto500KHz.StandardfrequencyrangeforSDdifferentialprobesis500KHzto�MHz.
Diameter of Probe or Hole SA Absolute
Shielded Part Number
SD Differential Shielded
Part Number Working Length
.156” 4.0mm 5/��” SA-10 9�16�99 SD-10 9�16�15 1.4” �6mm
.187” 4.7mm �/16” SA-1� 9�16�01 SD-1� 9�16�16 1.4” �6mm
.�18” 5.5mm 7/��” SA-14 9�16�0� SD-14 9�16�17 1.4” �6mm
.�50” 6.�mm 1/4” SA-16 9�16�0� SD-16 9�16�18 1.4” �6mm
.�81” 7.1mm 9/��” SA-18 9�16�04 SD-18 9�16�19 1.4” �6mm
.�1�” 7.9mm 5/16” SA-�0 9�16�05 SD-�0 9�16��0 �.0” 76mm
.�4�” 8.7mm 11/��” SA-�� 9�16�06 SD-�� 9�16��1 �.0” 76mm
.�75” 9.5mm �/8” SA-�4 9�16�07 SD-�4 9�16��� �.0” 76mm
.406” 10.�mm 1�/��” SA-�6 9�16�08 SD-�6 9�16��� �.0” 76mm
.4�7” 11.1mm 7/16” SA-�8 9�16�09 SD-�8 9�16��4 �.0” 76mm
.500” 1�.7mm 1/�” SA-�� 9�16�10 SD-�� 9�16��5 �.0” 76mm
.56�” 14.�mm 9/16” SA-�6 9�16�11 SD-�6 9�16��6 �.0” 76mm
.6�5” 15.9mm 5/8” SA-40 9�16�1� SD-40 9�16��7 �.0” 76mm
.687” 17.5mm 11/16” SA-44 9�16�1� SD-44 9�16��8 �.0” 76mm
.750” 19.0mm �/4” SA-48 9�16�14 SD-48 9�16��9 �.0” 76mm
nortecsonic@olympusNDT .com 1�
RC Scanner Probes
How to Order:ProvideProbeType,ProbeDiameter,andWorkingLength
example: rcb 0.240 Wl.800 ProbeType ProbeDiameter WorkingLength
NON-CONTaCT BOLT HOLE PROBES FOR RC RECHII SCaNNERS
TheRCScannerBoltholeprobesarefittedwitha4pinSwitchcraftconnector.RCprobesaremadeofstainlesssteel.
Thestandardcoilsusedarereflectiondifferential.Theyofferawidefrequencyrange(typically500KHzto�MHz)withgoodsignal-to-noiseratio.
RCprobesaremanufacturedfortheRECHIIHighSpeed(1500rpm)Scanner.TheseprobesarenotinterchangeablewiththePS-�orPS-�scanners.
Non-ContactRCstyleprobesarenormallyordered.010”(.�5mm)lessthantheholediameterforclearance.Theywilloperatewithmoreclearance(dependingondefectsize)withreducedsensitivity.
AllRECHIIprobesarecustommadetocustomerspecifications.
When ordering:
AllRCprobesizesshouldbeidentifiedusingdecimals(.___”).Theprobewillbemadetothediameterorderedwithoutundersizing.Workinglengthsshouldberequestedwhenplacinganorder.
RCScannerProbesareavailablefrom.050”to1.500”indiameter.TheyaredesignedtobeusedwiththeRECHIIIIscannerandNDT-�5LwithRECHIIoptioninstruments.Theyareusedtodetectminutecracksanddefectsintitanium,inconelandotherlowconductivityalloys.
RCSAvailable
Diameters
RCAAvailable
Diameters
RCBAvailable
Diameters
RCCAvailable
Diameters
0.050”to0.1�9” 0.1�0”to0.169” 0.170”to0.6�4” 0.6�5”to1.500”
Rotating Scanner Probes
14 www .olympusNDT .com
Rotating Scanner Probes
BOLT HOLE PROBES FOR PS-4 SCaNNER . (CONTaCT aND NON-CONTaCT)
ThestandardPS-4probesarefittedwitha6pinLemoconnector.Theseprobesaremadewithanaluminumbackshellandahighqualityplastictip.
Thestandardcoilsusedarereflectiondifferential,double-ended,shielded.Theyofferawidefrequencyrange(typically500Khz-4Mhz)withoptimumsignaltonoiseratio.Theyareusedfordetectingminutecracksanddefectsintitanium,inconelandotherlowconductivityalloys.Theseprobesareofferedinthreedifferentstyles:
1. Snc (Staveley non-contact)arenormallyordered.010”(.�5mm)lessthantheholediameterforclearance.Thewilloperatewithmoreclearance(dependingonthedefectsize)withreducedsensitivity.
�. Scr (Staveley contact receSSeD)areexpandabletomaintainsurfacecontact.Theycanbeexpandedupto10%oftheirnominalsize.SCRcoilsarerecessedslightlybelowthecontactsurfacewhichreducesscanningnoiseanddoesnotrequireprotectivetape.
�. Sc (Staveley contact)arethesameasSCRprobesexceptthecoilisnotrecessed.Theyprovidethebestsensitivitybutrequireprotectivetape.
SCR, SNC, and SC Scanner Probes
How to Order:ProvideProbeType,ProbeDiameter,andFrequency
example: Scr 0.239 -S/2 ProbeType ProbeDiameter FrequencyinMHz -S/2 = 2MHz -S/6 = 6MHz
Probe types:Scr - Staveley Contact RecessedSc - Staveley ContactSnc - Staveley Non-Contact
AllPS-4probesarecustommadetocustomerspecifications.
nortecsonic@olympusNDT .com 15
minimite, Ra19 and Ra2000 4-Pin Lemo Scanner Kits
How to Order:ProvideStockPartNumberandDescription
Ra19, Ra2000 aND mINImITE (4 PIN LEmO) BOLT HOLE PROBE KITS
Stainless Steel, Non Contact Stainless Steel, Non Contact
TwoProbeKitsareavailable:
TheStanDarD kitbringstogethereightofourmostpopularsizesinaconvenientcarryingcase.
TheDeluxe kitismadeof15sizesrangingfrom5/��”to�/4”inaconvenientcarryingcase.
Bothkitsarecomprisedofourstock,highquality,stainlesssteelprobes.Allaremanufactured.010”(.�5mm)lessthanthefractionalsizesshown.Standardworkinglengthsaresupplied.
Expanding Probes, Contact Expanding Probes, Contact
exPanDable kitcontainseightSPO-�564probestocoverholesizesfrom.187”(5mm)toover.500”(1�mm).Theseprobeshaveanexpansionrangeofabout�0%.
Scanner Probe Kits
Standard RA Kit Part Number 9216656
Deluxe RA Kit Part Number 9216657
Expandable Kit (SPO-3564) Part Number 9216658
9�0�481 RA-�/16 9�16�90 RA-5/�� 9�1715� SPO-�564.187-.�18
9�0�48� RA-7/�� 9�16�9� RA-1�/�� 9�17154 SPO-�564.�18-.�50
9�0�48� RA-1/4 9�0�481 RA-�/16 9�17155 SPO-�564.�50-.�81
9�1�485 RA-5/16 9�0�488 RA-7/16 9�17156 SPO-�564.�81-.�1�
9�0�487 RA-�/8 9�0�48� RA-7/�� 9�17157 SPO-�564.�1�-.�75
9�0�488 RA-7/16 9�0�489 RA-1/� 9�17158 SPO-�564.�75-.4�7
9�0�489 RA-1/� 9�0�48� RA-1/4 9�17159 SPO-�564.4�7-.500
9�0�490 RA-5/8 9�16�94 RA-9/16 9�17160 SPO-�564.500-.56�
CarryingCase 9�16�91 RA-9/�� CarryingCase
9�0�490 RA-5/8
9�0�845 RA-5/16
9�16�95 RA-11/16
9�16�9� RA-11/��
9�16�96 RA-�/4
9�0�487 RA-�/8
CarryingCase
16 www .olympusNDT .com
Detachable Bolt Hole Probes
manual Bolt Hole Probes
How to Order:ProvidePartNumberandDescription
example: 9216156 b/ 100kHz-500kHz /a .250 PartNumber BoltHole FrequencyRange Absolute Probe/Hole (*BR if Reflection coil) (D if Differential coil) Diameter
WhenorderingcablesthestandardinstrumentconnectorsuppliedwillbetheNortec8pinBurndyunlessotherwisespecified.Adaptorsareavailabletomatchdifferentinstrumentmanufacturers.
Note:Probes0.156”andbelowareunshieldedandhavenoexpansionslot.Probesbelow0.��6”havenoballend.Collarisnon-removableonprobes0.�50”to0.5�1”indiameter.
STaNDaRD maNuaL BOLT HOLE PROBES, aBSOLuTE aND DIFFERENTIaL
Thedetachableboltholeprobesaremanualprobesavailablewithabsoluteordifferentialcoilsinbridgeorreflectionconfigurations.Internalreferencecoilsensureaccuratebalancewithoutexternaladaptors.
Thedetachableconnectorallowstheprobetoberotatedwhileholdingthecablestationary.
Cablesaresoldseparately.
Probe Diameter
Absolute Shielded Part
Number Differential Shielded
Part Number
Working Length
.156” B/100KHZ-500KHZ/A.156 9�1615� B/500KHZ-�MHZ/D.156 9�16168 1.0” �5mm
.187” B/100KHZ-500KHZ/A.187 9�16154 B/500KHZ-�MHZ/D.187 9�16169 1.0” �5mm
.�18” B/100KHZ-500KHZ/A.�18 9�16155 B/500KHZ-�MHZ/D.�18 9�16170 1.0” �5mm
.�50” B/100KHZ-500KHZ/A.�50 9�16156 B/500KHZ-�MHZ/D.�50 9�16171 �.0” 51mm
.�81” B/100KHZ-500KHZ/A.�81 9�16157 B/500KHZ-�MHZ/D.�81 9�1617� �.0” 51mm
.�1�” B/100KHZ-500KHZ/A.�1� 9�16158 B/500KHZ-�MHZ/D.�1� 9�1617� �.0” 51mm
.�4�” B/100KHZ-500KHZ/A.�4� 9�16159 B/500KHZ-�MHZ/D.�4� 9�16174 �.0” 51mm
.�75” B/100KHZ-500KHZ/A.�75 9�16160 B/500KHZ-�MHZ/D.�75 9�16175 �.0” 51mm
.406” B/100KHZ-500KHZ/A.406 9�16161 B/500KHZ-�MHZ/D.406 9�16176 �.0” 51mm
.4�7” B/100KHZ-500KHZ/A.4�7 9�1616� B/500KHZ-�MHZ/D.4�7 9�16177 �.0” 51mm
.500” B/100KHZ-500KHZ/A.500 9�1616� B/500KHZ-�MHZ/D.500 9�16178 �.0” 51mm
.56�” B/100KHZ-500KHZ/A.56� 9�16164 B/500KHZ-�MHZ/D.56� 9�16179 �.�” 8�mm
.6�5” B/100KHZ-500KHZ/A.6�5 9�16165 B/500KHZ-�MHZ/D.6�5 9�16180 �.�” 8�mm
.687” B/100KHZ-500KHZ/A.687 9�16166 B/500KHZ-�MHZ/D.687 9�16181 �.�” 8�mm
.750” B/100KHZ-500KHZ/A.750 9�16167 B/500KHZ-�MHZ/D.750 9�1618� �.�” 8�mm
ForBridgeProbesusedetachablecableC/SC/6(Stock#911�016)orC/RA/6(Stock#911�017).StandardfrequencyrangeforAbsolute
Probesis100KHzto500Khz.StandardfrequencyrangeforDifferentialProbesis500KHzto�MHz.
*Whenorderingreflectioncoils(specialorder)omitpartnumberandorderbydescription.ForReflectionTypeProbes(specialorder)
usedetachablecableCR/SC/6(Stock#911�4�9)orCR/RA/6(Stock#911�4�0).Lengthsshownareapproximate.
nortecsonic@olympusNDT .com 17
PowerLink™ manual Bolt Hole Probes
How to Order:ProvidePartNumberandDescription
example: 9222218 bl/ 100kHz-500kHz /a .250 PartNumber BoltHole FrequencyRange Absolute Probe/Hole (*BRL if Reflection coil) (D if Differential coil) Diameter
note:Probes0.156”andbelowareunshieldedandhavenoexpansionslot.Probesbelow0.��6”havenoballend.Collarisnon-removableonprobes0.�50”to0.5�1”indiameter.
POwERLINK™ maNuaL BOLT HOLE PROBES, aBSOLuTE aND DIFFERENTIaL
ThePowerLink™detachableboltholeprobesaremanualprobesavailablewithabsoluteordifferentialcoilsinbridgeorreflectionconfigurations.Internalreferencecoilsensureaccuratebalancewithoutexternaladaptors.Allprobesaresuppliedwithanadjustablecollar.CommoncablecompatibilityamongmostPowerLink™eddycurrentprobesallowsonecabletooperateprobes in either bridgeor reflection configuration.AllNortec®PowerLink™eddy currentprobesarebackwardcompatibletoNortec®NDT-19andNDT-�4instruments.Cables“CL/SC/6”forNortec®�000seriesand“C/SC/67P”forNDT-19andNDT-�4instruments,aresoldseperately.
PowerLink™technologyoffersunmatchedperformancewhenusedwithStaveley’sneweddycurrentinstrumentation.PowerLink™featuresautomaticproberecognitionanddocumentation,aswellasprovidingtheoptimumintegrationbetweeninstrumentandsensor.
*When order ing
r e f l ec t ion co i l s
(specialorder)omit
part number and
orderbydescription.
Lengths shown are
approximate.
Detachable Bolt Hole Probes
Probe Diameter
Absolute Shielded Part
Number Differential Shielded
Part Number
Working Length
.156” B/100KHZ-500KHZ/A.156 9�1615� B/500KHZ-�MHZ/D.156 9�16168 1.0” �5mm
.187” B/100KHZ-500KHZ/A.187 9�16154 B/500KHZ-�MHZ/D.187 9�16169 1.0” �5mm
.�18” B/100KHZ-500KHZ/A.�18 9�16155 B/500KHZ-�MHZ/D.�18 9�16170 1.0” �5mm
.�50” B/100KHZ-500KHZ/A.�50 9�16156 B/500KHZ-�MHZ/D.�50 9�16171 �.0” 51mm
.�81” B/100KHZ-500KHZ/A.�81 9�16157 B/500KHZ-�MHZ/D.�81 9�1617� �.0” 51mm
.�1�” B/100KHZ-500KHZ/A.�1� 9�16158 B/500KHZ-�MHZ/D.�1� 9�1617� �.0” 51mm
.�4�” B/100KHZ-500KHZ/A.�4� 9�16159 B/500KHZ-�MHZ/D.�4� 9�16174 �.0” 51mm
.�75” B/100KHZ-500KHZ/A.�75 9�16160 B/500KHZ-�MHZ/D.�75 9�16175 �.0” 51mm
.406” B/100KHZ-500KHZ/A.406 9�16161 B/500KHZ-�MHZ/D.406 9�16176 �.0” 51mm
.4�7” B/100KHZ-500KHZ/A.4�7 9�1616� B/500KHZ-�MHZ/D.4�7 9�16177 �.0” 51mm
.500” B/100KHZ-500KHZ/A.500 9�1616� B/500KHZ-�MHZ/D.500 9�16178 �.0” 51mm
.56�” B/100KHZ-500KHZ/A.56� 9�16164 B/500KHZ-�MHZ/D.56� 9�16179 �.�” 8�mm
.6�5” B/100KHZ-500KHZ/A.6�5 9�16165 B/500KHZ-�MHZ/D.6�5 9�16180 �.�” 8�mm
.687” B/100KHZ-500KHZ/A.687 9�16166 B/500KHZ-�MHZ/D.687 9�16181 �.�” 8�mm
.750” B/100KHZ-500KHZ/A.750 9�16167 B/500KHZ-�MHZ/D.750 9�1618� �.�” 8�mm
18 www .olympusNDT .com
3551 Pencil Probes
NORTEC® 3551 PENCIL PROBES
The�551typepencilprobesaresuppliedwithabuilt-insmalldiameter,lownoisecableandanadjustablecollar.Theyareavailablewithabsoluteordifferentialcoilsinbothbridgeandreflectionconfigurations(shieldedandunshielded).Shieldedcoilshaveaneffectivesensitiveareaofapproximately0.08”(�mm)indiameter.ProbeswillbesuppliedwithaNortec®8pinBurndyconnectorunlessotherwisespecified.
Nortec® 3551 Pencil Probes
How to Order:ProvidePartNumberandDescription
example: 9204914 3551f 100kHz PartNumber Type Frequency
The�551probehasastandardO.D.=0.18”*Probediameter=0.�5”
Frequency Range Absolute Unshielded Part Number Absolute Shielded Part Number
Standard Absolute (Bridge type non-PowerLink™)
50Khz-100Khz �55150Khz 9�1��8� �551F50Khz 9�1��84
100Khz-500Khz �551100Khz 9�04910 �551F100Khz 9�04914
500Khz-1Mhz �551500Khz 9�04911 �551F500Khz 9�04915
1Mhz-�Mhz �5511Mhz 9�0491� �551F1Mhz 9�04916
�Mhz-4Mhz �551�Mhz 9�0491� �551F�Mhz 9�04917
4Mhz-6Mhz �5514Mhz 9�1��8� �551F4Mhz 9�1��85
Reflection Absolute (non-PowerLink™)
1Khz-100Khz �551R1Khz 9�1659�* �551RF1Khz 9�1659�*
100Khz-1Mhz �551R100Khz 9�1��91 �551RF100Khz 9�1��94
1Mhz-�Mhz �551R1Mhz 9�1��9� �551RF1Mhz 9�1��95
�Mhz-6Mhz �551R�Mhz 9�1��9� �551RF�Mhz 9�1��96
Frequency Range Differential Unshielded Part Number Differential Shielded Part Number
Standard Differential (Bridge type non-PowerLink™)
100Khz-500Khz �551D100Khz 9�16590 �551DF100Khz 9�16591
500Khz-�Mhz �551D500Khz 9�1��86 �551DF500Khz 9�1��89
�Mhz-4Mhz �551D�Mhz 9�1��87 �551DF�Mhz 9�1�4�8
4Mhz-6Mhz �551D4Mhz 9�1��88 �551DF4Mhz 9�1��90
Reflection Differential (non-PowerLink™)
500Khz-�Mhz �551RD500Khz 9�1��97 �551RDF500Khz 9�1��99
�Mhz-6Mhz �551RD�Mhz 9�1��98 �551RDF�Mhz 9�1�400
nortecsonic@olympusNDT .com 19
Nortec® 3551L Pencil Probes
How to Order:ProvidePartNumberandDescription
example: 9230122 3551fl 100kHz PartNumber Type Frequency
3551 Pencil Probes
NORTEC® 3551L POwERLINK™ PENCIL PROBES
The�551Ltypepencilprobesaresuppliedwithabuilt-insmalldiameter,lownoisecableandanadjustablecollar.Theyareavailablewithabsoluteordifferentialcoilsinbothbridgeandreflectionconfigurations(shieldedandunshielded).Shieldedcoilshaveaneffectivesensitiveareaofapproximately0.08”(�mm)indiameter.Probeswillbesuppliedwitha16pinLemoconnector.
The�551probehasastandardO.D.=0.18”*Probediameter=0.�5”
frequency range absolute unshielded Part number absolute Shielded Part number
Standard absolute (bridge type )
50Khz-100Khz �551L50Khz 9��0115 �551FL50Khz 9��01�1
100Khz-500Khz �551L100Khz 9��0116 �551FL100Khz 9��01��
500Khz-1Mhz �551L500Khz 9��0117 �551FL500Khz 9��01��
1Mhz-�Mhz �55L11Mhz 9��0118 �551FL1Mhz 9��01�4
�Mhz-4Mhz �55L1�Mhz 9��0119 �551FL�Mhz 9��01�5
4Mhz-6Mhz �55L14Mhz 9��01�0 �551FL4Mhz 9��01�6
reflection absolute
1Khz-100Khz �551RL1Khz 9��010�* �551RFL1Khz 9��0107*
100Khz-1Mhz �551RL100Khz 9��0104 �551RFL100Khz 9��0108
1Mhz-�Mhz �551RL1Mhz 9��0105 �551RFL1Mhz 9��0109
frequency range Differential unshielded Part number Differential Shielded Part number
Standard Differential (bridge type)
100Khz-500Khz �551DL100Khz 9��01�7 �551DFL100Khz 9��01�1
500Khz-�Mhz �551DL500Khz 9��01�8 �551DFL500Khz 9��01��
�Mhz-4Mhz �551DL�Mhz 9��01�9 �551DFL�Mhz 9��01��
4Mhz-6Mhz �551DL4Mhz 9��01�0 �551DFL4Mhz 9��01�4
reflection Differential
500Khz-�Mhz �551RDL500Khz 9��0111 �551RDFL500Khz 9��011�
�Mhz-6Mhz �551RDL�Mhz 9��011� �551RDFL�Mhz 9��0114
�0 www .olympusNDT .com
Detachable Pencil Probes
Nortec® Standard Detachable Pencil Probes
How to Order:ProvidePartNumberandDescription
example: 9213408 P /100kHz-500kHz/ a PartNumber Pencil FrequencyRange Absolute (PRifReflection) (DifDifferential)
NORTEC® STaNDaRD DETaCHaBLE PENCIL PROBES
TheNortec®standarddetachablepencilprobesaresuppliedwithanadjustablecollarandahighqualityquickreleaseconnector.
Theyareavailablewithabsoluteordifferentialcoilsinbothbridgeandreflectionconfigurations(shieldedandunshielded).Shieldedcoilshaveaneffectivesensitiveareaofapproximately.08”(�mm)indiameter.
Cablessoldseparately.
For bridge probes use cables “C/SC/6” (P/N 911�016) or “C/RA/6” (P/N 911�017). For reflection probes use cables “CR/SC/6”(P/N911�4�9)or“CR/RA/6”(P/N911�4�0).TheaboveprobeshaveastandardO.D.=0.18”,*Probediameter=0.�5”
frequency range absolute unshielded Part number absolute Shielded Part number
Detachable absolute (bridge type )
50Khz-100Khz P/50Khz-100Khz/AU 9�1�401 P/50Khz-100Khz/A 9�1�407
100Khz-500Khz P/100Khz-500Khz/AU 9�1�40� P/100Khz-500Khz/A 9�1�408
500Khz-1Mhz P/500Khz-1Mhz/AU 9�1�40� P/500Khz-1Mhz/A 9�1�014
1Mhz-�Mhz P/1Mhz-�Mhz/AU 9�1�404 P/1Mhz-�Mhz/A 9�1�409
�Mhz-4Mhz P/�Mhz-4Mhz/AU 9�1�405 P/�Mhz-4Mhz/A 9�1�410
4Mhz-6Mhz P/4Mhz-6Mhz/AU 9�1�406 P/4Mhz-6Mhz/A 9�1�411
Detachabl e reflection absolute
1Khz-100Khz PR/1Khz-100Khz/AU 9�165�8* PR/1Khz-100Khz/A 9�165�9*
100Khz-1Mhz PR/100Khz-1Mhz/AU 9�1�417 PR/100Khz-1Mhz/A 9�1�4�0
1Mhz-�Mhz PR/1Mhz-�Mhz/AU 9�1�418 PR/1Mhz-�Mhz/A 9�1�4�1
frequency range Differential unshielded Part number Differential Shielded Part number
Detachable Differential (bridge type)
500Khz-�Mhz P/500Khz-�Mhz/DU 9�1�41� P/500Khz-�Mhz/D 9�1�015
�Mhz-4Mhz P/�Mhz-4Mhz/DU 9�1�41� P/�Mhz-4Mhz/D 9�1�415
4Mhz-6Mhz P/4Mhz-6Mhz/DU 9�1�414 P/4Mhz-6Mhz/D 9�1�416
Detachable reflection Differential
500Khz-�Mhz PR/500Khz-�Mhz/DU 9�1�4�� PR/500Khz-�Mhz/D 9�1�4�5
�Mhz-6Mhz PR/�Mhz-6Mhz/DU 9�1�4�4 PR/�Mhz-6Mhz/D 9�1�4�6
nortecsonic@olympusNDT .com �1
Nortec® PowerLink™ Detachable Pencil Probes
How to Order:ProvidePartNumberandDescription
example: 9222180 Pl /100kHz-500kHz/ a PartNumber Pencil FrequencyRange Absolute (PRLifReflection) (DifDifferential)
Detachable Pencil Probes
NORTEC® POwERLINK™ DETaCHaBLE PENCIL PROBES
TheNortec®PowerLink™detachablepencilprobesaresuppliedwithanadjustablecollarandahighqualityquickreleaseconnector.
Theyareavailablewithabsoluteordifferentialcoilsinbothbridgeandreflectionconfigurations(shieldedandunshielded).Shieldedcoilshaveaneffectivesensitiveareaofapproximately0.08”(�mm)indiameter.
Cablessoldseparately.
frequency range absolute unshielded Part number absolute Shielded Part number
Detachable absolute (bridge type )
50Khz-100Khz PL/50Khz-100Khz/AU 9���411 PL/50Khz-100Khz/A 9���179
100Khz-500Khz PL/100Khz-500Khz/AU 9���41� PL/100Khz-500Khz/A 9���180
500Khz-1Mhz PL/500Khz-1Mhz/AU 9���41� PL/500Khz-1Mhz/A 9���16�
1Mhz-�Mhz PL/1Mhz-�Mhz/AU 9���414 PL/1Mhz-�Mhz/A 9���181
�Mhz-4Mhz PL/�Mhz-4Mhz/AU 9���415 PL/�Mhz-4Mhz/A 9���416
4Mhz-6Mhz PL/4Mhz-6Mhz/AU 9���417 PL/4Mhz-6Mhz/A 9���418
Detachable reflection absolute
1Khz-100Khz PRL/1Khz-100Khz/AU 9���419* PRL/1Khz-100Khz/A 9���4�0*
100Khz-1Mhz PRL/100Khz-1Mhz/AU 9���4�1 PRL/100Khz-1Mhz/A 9���188
1Mhz-�Mhz PRL/1Mhz-�Mhz/AU 9���4�� PRL/1Mhz-�Mhz/A 9���4��
frequency range Differential unshielded Part number Differential Shielded Part number
Detachable Differential (bridge type)
500Khz-�Mhz PL/500Khz-�Mhz/DU 9���4�6 PL/500Khz-�Mhz/D 9���184
�Mhz-4Mhz PL/�Mhz-4Mhz/DU 9���4�7 PL/�Mhz-4Mhz/D 9���185
4Mhz-6Mhz PL/4Mhz-6Mhz/DU 9���4�8 PL/4Mhz-6Mhz/D 9���186
Detachable reflection Differential
500Khz-�Mhz PRL/500Khz-�Mhz/DU 9���4�0 PRL/500Khz-�Mhz/D 9���16�
�Mhz-6Mhz PRL/�Mhz-6Mhz/DU 9���4�1 PRL/�Mhz-6Mhz/D 9���4��
�� www .olympusNDT .com
Detachable Pencil Probes
NORTEC® STaNDaRD DETaCHaBLE mETaL SHaFT PENCIL PROBES
Thesegeneralpurposeprobesareusedforsurfaceornearsurfacecrackdetection.Theyarealsousedforconductivityandcoatingthicknessmeasurements.Theyareavailablewithabsolutecoilsinthebridgeconfiguration(shielded,unshieldedandreflectionshielded).Referencecoilsareinternal,insuringthebestmatchtothetestcoilwithoutanexternaladapter.Theseprobesincludeahighqualityquickreleaseconnector.
Cablessoldseparately.
Nortec® Standard Detachable metal Shaft Probe
How to Order:ProvidePartNumberandDescription
example:9222180 P /100kHz-500kHz/ a /90 .5 /6PartNumber Pencil FrequencyRange Absolute Angleattip Dropattip TotalLength (PRifReflection) (DifDifferential)
Forbridgeprobesusecables“C/SC/6”(P/N911�016)or“C/RA/6”(P/N911�017).Forreflectionprobesusecables“CR/SC/6”(P/N911�4�9)or“CR/RA/6”(P/N911�4�0).Otherangles,dropsandlengthsavailable.
Frequency Range Absolute Shielded Part Number Reflection Absolute Shielded Part Number
Straight Shaft
50Khz-100Khz P/50Khz-100Khz/A/0.0/4 9�16190 PR/50Khz-500Khz/A/0.0/4 9�16194
100Khz-500Khz P/100Khz-500Khz/A/0.0/4 9�16191
500Khz-1Mhz P/500Khz-1Mhz/A/0.0/4 9�1619� PR/500Khz-�Mhz/A/0.0/4 9�16195
1Mhz-�Mhz P/1Mhz-�Mhz/A/0.0/4 9�1619�
Right Angle Shaft 0.03” Drop
50Khz-100Khz P/50Khz-100Khz/A/90.0�/6 9�16�00 PR/50Khz-500Khz/A/90.0�/6 9�16�04
100Khz-500Khz P/100Khz-500Khz/90.0�/6 9�16�01
500Khz-1Mhz P/500Khz-1Mhz/A/90.0�/6 9�16�0� PR/500Khz-�Mhz/A/90.0�/6 9�16�05
1Mhz-�Mhz P/1Mhz-�Mhz/A/90.0�/6 9�16�0�
Right Angle Shaft 0.25” Drop
50Khz-100Khz P/50Khz-100Khz/A/90.�5/6 9�16�10 PR/50Khz-500Khz/A/90.�5/6 9�16�14
100Khz-500Khz P/100Khz-500Khz/90.�5/6 9�16�11
500Khz-1Mhz P/500Khz-1Mhz/A/90.�5/6 9�16�1� PR/500Khz-�Mhz/A/90.�5/6 9�16�15
1Mhz-�Mhz P/1Mhz-�Mhz/A/90.�5/6 9�16�1�
Right Angle Shaft 0.50” Drop
50Khz-100Khz P/50Khz-100Khz/A/90.5/6 9�16��0 PR/50Khz-500Khz/A/90.5/6 9�16���
100Khz-500Khz P/100Khz-500Khz/90.5/6 9�1�01�
500Khz-1Mhz P/500Khz-1Mhz/A/90.5/6 9�16��1 PR/500Khz-�Mhz/A/90.5/6 9�16��4
1Mhz-�Mhz P/1Mhz-�Mhz/A/90.5/6 9�16���
nortecsonic@olympusNDT .com ��
Nortec® PowerLink™ Detachable metal Shaft Probes
How to Order:ProvidePartNumberandDescription
example: 9222180 ml /100kHz-500kHz/ a /90 .5 /6 PartNumber ML=Bridge FrequencyRange Absolute Angleattip Dropattip TotalLength MRL=Reflection
Detachable Pencil Probes
NORTEC® POwERLINK™ DETaCHaBLE mETaL SHaFT PENCIL PROBES
PowerLink™MetalShaftprobesareusedforsurfaceornearsurfacecrackdetection.Theyarealsousedforconductivityandcoatingthicknessmeasurements.Theyareavailablewithabsolutecoilsinthebridgeconfiguration(shielded,unshieldedandreflectionshielded).Referencecoilsareinternal,insuringthebestmatchtothetestcoilwithoutanexternaladapter.CommoncablecompatibilityamongmostPowerLink™eddycurrentprobesallowsonecabletooperateprobesineitherbridgeorreflectionconfiguration.AllNortec®PowerLink™eddycurrentprobesarebackwardcompatibletoNortec®NDT-19andNDT-�4instruments.Cables“CL/SC/6”forNortec�000seriesand“C/SC/67P”forNDT-19andNDT-�4instruments,aresoldseperately.
ProbesuseCL/SC/6cable(P/N91��08�).Otherangles,dropsandlengthsavailable.
Frequency Range Absolute Shielded Part Number Reflection Absolute Shielded Part Number Straight Shaft
50Khz-100Khz ML/50Khz-100Khz/A/0.0/4 9���165 MRL/50Khz-500Khz/A/0.0/4 9����09
100Khz-500Khz ML/100Khz-500Khz/A/0.0/4 9����0�
500Khz-1Mhz ML/500Khz-1Mhz/A/0.0/4 9����0� MRL/500Khz-�Mhz/A/0.0/4 9����10
1Mhz-�Mhz ML/1Mhz-�Mhz/A/0.0/4 9���47�
Right Angle Shaft 0.03” Drop
50Khz-100Khz ML/50Khz-100Khz/A/90.0�/6 9���47� MRL/50Khz-500Khz/A/90.0�/6 9���477
100Khz-500Khz ML/100Khz-500Khz/90.0�/6 9����04
500Khz-1Mhz ML/500Khz-1Mhz/A/90.0�/6 9����05 MRL/500Khz-�Mhz/A/90.0�/6 9���4781Mhz-�Mhz ML/1Mhz-�Mhz/A/90.0�/6 9��00��
Right Angle Shaft 0.25” Drop
50Khz-100Khz ML/50Khz-100Khz/A/90.�5/6 9���474 MRL/50Khz-500Khz/A/90.�5/6 9����1�
100Khz-500Khz ML/100Khz-500Khz/90.�5/6 9����06
500Khz-1Mhz ML/500Khz-1Mhz/A/90.�5/6 9����07 MRL/500Khz-�Mhz/A/90.�5/6 9����14
1Mhz-�Mhz ML/1Mhz-�Mhz/A/90.�5/6 9��0004
Right Angle Shaft 0.50” Drop 50Khz-100Khz ML/50Khz-100Khz/A/90.5/6 9���476 MRL/50Khz-500Khz/A/90.5/6 9����15100Khz-500Khz ML/100Khz-500Khz/90.5/6 9���164500Khz-1Mhz ML/500Khz-1Mhz/A/90.5/6 9����08 MRL/500Khz-�Mhz/A/90.5/6 9����161Mhz-�Mhz ML/1Mhz-�Mhz/A/90.5/6 9��0071
�4 www .olympusNDT .com
Detachable Surface Probes
NORTEC® STaNDaRD DETaCHaBLE SuRFaCE PROBES
Detachablesurfaceprobesareavailableinavarietyofdiametersandfrequencyranges.Theyareshieldedtoprovidemaximumsensitivityandareusedforcrackdetection,thicknessmeasurement,conductivity,andcoatingthicknessmeasurements.Theseprobesincludeahighqualityquickreleaseconnector.Cablessoldseparately.
Nortec® Standard Detachable Surface Probes
How to Order:ProvidePartNumberandDescription
example: 9213012 S /1kHz-50kHz /.31 PartNumber Surface FrequencyRange Diameter (SRifReflection)
Forbridgeprobesusecables“C/SC/6”(P/N911�016)or“C/RA/6”(P/N911�017).Forreflectionprobesusecables“CR/SC/6”(P/N911�4�9)or“CR/RA/6”(P/N911�4�0).
Standard bridge
Frequency Range Diameter DescriptionEqivalent to Non-Detachable
SPO ProbePart Number
100Hz-�Khz .75 S/100Hz-�Khz/.75 9�1�549
�00Hz-10Khz .6� S/�00Hz-10Khz/.6� SPO-565,SPO-11�5 9�1�011
400Hz-�0Khz .50 S/400Hz-�0Khz/.50 SPO-565A 9�1�548
500Hz-40Khz .44 S/500Hz-40Khz/.44 SPO-140�,SPO-1�91 9�1�547
1Khz-50Khz .�1 S/1Khz-50Khz/.�1 SPO-1�84,SPO-1598 9�1�01�
5Khz-100Khz .�5 S/5Khz-100Khz/.�5 SPO-�1�� 9�1�546
100Khz-500Khz .�5 S/100Khz-500Khz/.�5 9�16541
Standard Reflection
Frequency Range Diameter DescriptionEqivalent to Non-Detachable
Alcoprobe & SPO ProbesPart Number
100Hz-5Khz .75 SR/100Hz-5Khz/.75 APS/�0/S 9�1�555
100Hz-�0Khz .6� SR/100Hz-�0Khz/.6� APG/16/S,SPO-�1�4 9�1�554
�00Hz-40Khz .50 SR/�00Hz-40Khz/.50 APB/1�.5/S,SPO-�1�6 9�1�55�
400Hz-60Khz .44 SR/400Hz-60Khz/.44 APBK/10.5/S,SPO-�0�5 9�1�55�
700Hz-80Khz .�1 SR/700Hz-80Khz/.�1 APR/8/S,SPO-�0�6 9�1�551
�Khz-�00Khz .�5 SR/�Khz-�00Khz/.�5 APR/7/S,SPO-�404 9�1�550
nortecsonic@olympusNDT .com �5
Nortec® PowerLink™ Detachable Surface Probes
How to Order:ProvidePartNumberandDescription
example: 9222161 Sl /1kHz-50kHz /.31 PartNumber Surface FrequencyRange Diameter (SRLifReflection)
ProbesuseCL/SC/6cable(P/N91��08�).
NORTEC® POwERLINK™ DETaCHaBLE SuRFaCE PROBES
Detachablesurfaceprobesareavailableinavarietyofdiametersandfrequencyranges.Theyareshieldedtoprovidemaximumsensitivity and are used for crack detection, thickness measurement, conductivity and coating thickness measurements.Commoncablecompatibility amongmostPowerLink™eddycurrentprobesallowsonecable tooperateprobes ineitherbridgeorreflectionconfiguration.AllNortec®PowerLink™eddycurrentprobesarebackwardcompatibletoNortec®NDT-19andNDT-�4instruments.Cables“CL/SC/6”forNortec�000seriesand“C/SC/67P”forNDT-19andNDT-�4instruments,aresoldseperately.
Detachable Surface Probes
Standard Bridge
Frequency Range Diameter DescriptionEqivalent to Non-Detachable
SPO ProbePart Number
100Hz-�Khz .75 SL/100Hz-�Khz/.75 9���19�
�00Hz-10Khz .6� SL/�00Hz-10Khz/.6� SPO-565,SPO-11�5 9���19�
100Khz-500Khz .6� SL/100Khz-500Khz/.6� 9����8�
400Hz-�0Khz .50 SL/400Hz-�0Khz/.50 SPO-565A 9���457
500Hz-40Khz .44 SL/500Hz-40Khz/.44 SPO-140�,SPO-1�91 9���456
1Khz-50Khz .�1 SL/1Khz-50Khz/.�1 SPO-1�84,SPO-1598 9���161
5Khz-100Khz .�5 SL/5Khz-100Khz/.�5 SPO-�1�� 9���196
100Khz-500Khz .�5 SL/100Khz-500Khz/.�5 9����08
Standard Reflection
Frequency Range Diameter DescriptionEqivalent to Non-Detachable
Alcoprobe & SPO ProbesPart Number
100Hz-5Khz .75 SRL/100Hz-5Khz/.75 APS/�0/S 9���458
100Hz-�0Khz .6� SRL/100Hz-�0Khz/.6� APG/16/S,SPO-�1�4 9���160
�00Hz-40Khz .50 SRL/�00Hz-40Khz/.50 APB/1�.5/S,SPO-�1�6 9���198
400Hz-60Khz .44 SRL/400Hz-60Khz/.44 APBK/10.5/S,SPO-�0�5 9���199
700Hz-80Khz .�1 SRL/700Hz-80Khz/.�1 APR/8/S,SPO-�0�6 9����00
�Khz-�00Khz .�5 SRL/�Khz-�00Khz/.�5 APR/7/S,SPO-�404 9����01
�6 www .olympusNDT .com
Nortec® Standard Ring/Donut Probes
How to Order:ProvidePartNumberandDescription
example: 9203307 SPo-996 ring/Donut Probe PartNumber SPONumber
Ring/Donut Probes
I.D.
O.D.
NORTEC® STaNDaRD RING/DONuT PROBES (SPO SERIES)
Ring/Donut(encircling)probesaremadetofitvariousfastenerheaddiameters.Theyaremostlyusedforsubsurfacecrackdetectionwiththefastenerinplace.Theseprobesaresuppliedwithabuilt-insmalldiameterlownoisecable.Theyareavailableinbothbridgeorreflectionconfigurations.
ProbeswillbesuppliedwithNortec8pinBurndyconnectorunlessotherwisespecified.Othersizesandfrequenciesareavailabletomeetspecificrequirements.ContacttheSensorsdepartmentatStaveleyInstrumentsformoredetails.
*Probesintwohalvesforlimitedaccessarea.
Bridge Ring/Donut Probes Reflection Ring/Donut Probes
Frequency Range
I.D. O.D. Description Part # Frequency Range I.D. O.D. Description Part #
500Hz-5Khz .�0 .75 SPO-996 9�0��07 100Hz-10Khz .�0 .80 SPO-�0�1 9�1670�
100Hz-1Khz .�� .8� SPO-1589 9�14019 100Hz-10Khz .40 .80 SPO-�1�1 9�1670�
100Hz-1Khz .�� 1.00 SPO-1747 9�140�0 100Hz-10Khz .50 1.�5 SPO-�0�0 9�16704
100Hz-1Khz .�4 1.00 SPO-7�1 9�0�950 100Hz-10Khz .54 .88 SPO-�4�4 9�16705
100Hz-1Khz .�8 1.00 SPO-1746 9�140�1 100Hz-10Khz .54 1.15 SPO-�4�� 9�16706
�00Hz-1Khz .40 .80 SPO-1074 9�04788* 100Hz-10Khz .6� 1.40 SPO-�0�� 9�16707
�00Hz-1Khz .4� .80 SPO-��5� 9�140�� 100Hz-10Khz .6� 1.56 SPO-�4�� 9�16708
100Hz-1Khz .46 1.00 SPO-1745 9�140�4 100Hz-10Khz .80 1.40 SPO-�064 9�16709
100Hz-1Khz .50 1.00 SPO-�7�� 9�140�5 100Hz-10Khz .87 1.40 SPO-�4�5 9�16710
100Hz-1Khz .50 1.�5 SPO-78� 9�0�951
100Hz-1Khz .56 1.15 SPO-1744 9�140�6
100Hz-1Khz .6� 1.1� SPO-1�40 9�140�0*
100Hz-1Khz .6� 1.40 SPO-1154 9�0�955
100Hz-1Khz .64 1.15 SPO-174� 9�140�7
100Hz-1Khz .65 1.40 SPO-�8�9 9�140�8
100Hz-1Khz .75 1.40 SPO-1��8 9�0��94
100Hz-1Khz .80 1.40 SPO-1�74 9�0�956
100Hz-1Khz .87 1.40 SPO-���5 9�140�9
nortecsonic@olympusNDT .com �7
Nortec® PowerLink™ Ring/Donut Probes
How to Order:ProvidePartNumberandDescription
example: 9230154 SPo-996l ring/Donut Probe PartNumber SPONumber
Ring/Donut Probes
NORTEC® POwERLINK™ RING/ DONuT PROBES (SPO SERIES)
Ring/Donut(encircling)probesaremadetofitvariousfastenerheaddiameters.Theyaremostlyusedforsubsurfacecrackdetectionwiththefastenerinplace.Theseprobesaresuppliedwithabuilt-insmalllownoisecable.Theyareavailableinbothbridgeorreflectionconfigurations.
Probeswillbesuppliedwitha16pinLemoconnector.Othersizesandfrequenciesareavailabletomeetspecificrequirements.ContacttheSensorsdepartmentatStaveleyInstrumentsformoredetails.
I.D.
O.D.
*Probesintwohalvesforlimitedaccessarea.
Bridge Ring/Donut Probes Reflection Ring/Donut Probes
Frequency Range I.D. O.D. Description Part # Frequency Range I.D. O.D. Description Part #
500Hz-5Khz .�0 .75 SPO-996L 9��0154 100Hz-10Khz .�0 .80 SPO-�0�1L 9��0076
100Hz-1Khz .�� .8� SPO-1589L 9��0�15 100Hz-10Khz .40 .80 SPO-�1�1L 9��0���
100Hz-1Khz .�� 1.00 SPO-1747L 9��0�16 100Hz-10Khz .50 1.�5 SPO-�0�0L 9��0���
100Hz-1Khz .�4 1.00 SPO-7�1L 9��0�17 100Hz-10Khz .54 .88 SPO-�4�4L 9��0��4
100Hz-1Khz .�8 1.00 SPO-1746L 9��0�18 100Hz-10Khz .54 1.15 SPO-�4��L 9��0��5
�00Hz-1Khz .40 .80 SPO-1074L 9��0�19* 100Hz-10Khz .6� 1.40 SPO-�0��L 9��0��6
�00Hz-1Khz .4� .80 SPO-��5�L 9��0��0 100Hz-10Khz .6� 1.56 SPO-�4��L 9��0��7
100Hz-1Khz .46 1.00 SPO-1745L 9��0��1 100Hz-10Khz .80 1.40 SPO-�064L 9��0��8
100Hz-1Khz .50 1.00 SPO-�7��L 9��0��� 100Hz-10Khz .87 1.40 SPO-�4�5L 9��0��9
100Hz-1Khz .50 1.�5 SPO-78�L 9��0���
100Hz-1Khz .56 1.15 SPO-1744L 9��0��4
100Hz-1Khz .6� 1.1� SPO-1�40L 9��0��5*
100Hz-1Khz .6� 1.40 SPO-1154L 9��0��6
100Hz-1Khz .64 1.15 SPO-174�L 9��0��7
100Hz-1Khz .65 1.40 SPO-�8�9L 9��0��8
100Hz-1Khz .75 1.40 SPO-1��8L 9��0��9
100Hz-1Khz .80 1.40 SPO-1�74L 9��0��0
100Hz-1Khz .87 1.40 SPO-���5L 9��0��1
�8 www .olympusNDT .com
NORTEC® DETaCHaBLE RING/ DONuT PROBES
Ring/ Donut (encircling) probes are made to fitvarious fastenerheaddiameters.Theyaremostlyusedforsubsurfacecrackdetectionwiththefastenerin place. They are available in both bridge orreflectionconfigurations.
Theseprobesincludeahighqualityquickreleaseconnector.Cablessoldseparately.
Ring/Donut Probes
Nortec® Detachable Ring/Donut Probes
How to Order:ProvidePartNumberandDescription
example: 9215653 r /100Hz - 1kHz /.50 1.00 PartNumber Surface FrequencyRange InternalDiameter ExternalDiameter (RRifreflection)
Forbridgeprobesusecables“C/SC/6”(P/N911�016)or“C/RA/6”(P/N911�017).Forreflectionprobesusecables“CR/SC/6”(P/N911�4�9)or“CR/RA/6”(P/N911�4�0).
Bridge Ring/Donut Probes
Frequency Range I.D. O.D. Description Part # Equivalent to Non-Detachable SPO Probes
500Hz-5Khz .�0 .75 R/500Hz-5Khz/.�0-.75 9�15650 SPO-996
100Hz-1Khz .�� 1.00 R/100Hz-1Khz/.��-1.00 9�15651 SPO-1747
100Hz-1Khz .�4 1.00 R/100Hz-1Khz/.�4-1.00 9�1565� SPO-7�1
100Hz-1Khz .50 1.00 R/100Hz-1Khz/.50-1.00 9�1565� SPO-�7��
100Hz-1Khz .50 1.�5 R/100Hz-1Khz/.50-1.15 9�15654 SPO-78�
�00Hz-1Khz .56 1.15 R/100Hz-1Khz/.56-1.15 9�15655 SPO-1744
�00Hz-1Khz .6� 1.40 R/100Hz-1Khz/.6�-1.40 9�15656 SPO-1154
100Hz-1Khz .75 1.40 R/100Hz-1Khz/.75-1.40 9�15657 SPO-1��8
100Hz-1Khz .80 1.40 R/100Hz-1Khz/.80-1.40 9�15658 SPO-1�74
Reflection Ring/Donut Probes
Frequency Range I.D. O.D. Description Part # Equivalent to Alcoprobe or SPO Probes
100Hz-10Khz .�0 .80 RR/100Hz-10Khz/.�0-.80 9�15659 ARP/8/��PSPO-�0�1
100Hz-10Khz .40 .80 RR/100Hz-10Khz/.40-.80 9�15660 ARP/9.5/��PSPO-�1�1
100Hz-10Khz .50 1.�5 RR/100Hz-10Khz/.50-1.�5 9�15661 ARP/1�.5/�1PSPO-�0�0
100Hz-10Khz .54 .88 RR/100Hz-10Khz/.54-.88 9�1566� ARP/1�.5/�4PSPO-�4�4
100Hz-10Khz .54 1.15 RR/100Hz-10Khz/.54-1.15 9�1566� ARP/1�.5/�9PSPO-�4��
100Hz-5Khz .6� 1.40 RR/100Hz-5Khz/.6�-1.40 9�15664 ARP/16/�6PSPO-�0��
100Hz-5Khz .6� 1.56 RR/100Hz-5Khz/.6�-1.56 9�15665 ARP/16/40PSPO-����
100Hz-5Khz .80 1.40 RR/100Hz-5Khz/.80-1.40 9�15666 ARP/�0/�6PSPO-�064
100Hz-5Khz .87 1.40 RR/100Hz-5Khz/.87-1.40 9�15667 ARP/��/�6PSPO-�4�5
nortecsonic@olympusNDT .com �9
NORTEC® POwERLINK™ DETaCHaBLE RING/ DONuT PROBES
Ring/ Donut (encircling) probes are made to fitvariousfastenerheaddiameters.Theyareusedmostlyfor subsurface crack detection with the fastener inplace.Theyareavailableinbothbridgeorreflectionconfigurations.Commoncablecompatibilityamongmost PowerLink™ eddy current probes allows onecabletooperateprobesineitherbridgeorreflectionconfiguration.AllNortec®PowerLink™eddycurrentprobesarebackwardcompatiblewithNortec®NDT-19 and NDT-�4 instruments. Cables “CL/SC/6” forNortec®�000seriesand“C/SC/67P”forNDT-19andNDT-�4instruments,aresoldseperately.
Nortec® Detachable PowerLink™ Ring/Donut Probes
How to Order:ProvidePartNumberandDescription
example: 9222233 rl /500Hz - 5kHz /.30- .75 PartNumber Surface FrequencyRange InternalDiameter ExternalDiameter (RRLifreflection)
Ring/Donut Probes
Other sizes and frequencies are available to meet specific requirements. Contact the Sensors department at Staveley Instrumentsformoredetails.ProbesuseCL/SC/6cable(91��08�).
Bridge Ring/Donut Probes
Frequency Range I.D. O.D. Description Part # Equivalent to Non-Detachable SPO Probes
500Hz-5Khz .�0 .75 RL/500Hz-5Khz/.�0-.75 9������ SPO-996
100Hz-1Khz .�� 1.00 RL/100Hz-1Khz/.��-1.00 9���479 SPO-1747
100Hz-1Khz .�4 1.00 RL/100Hz-1Khz/.�4-1.00 9���480 SPO-7�1
100Hz-1Khz .50 1.00 RL/100Hz-1Khz/.50-1.00 9���481 SPO-�7��
100Hz-1Khz .50 1.�5 RL/100Hz-1Khz/.50-1.15 9���48� SPO-78�
�00Hz-1Khz .56 1.15 RL/100Hz-1Khz/.56-1.15 9���48� SPO-1744
�00Hz-1Khz .6� 1.40 RL/100Hz-1Khz/.6�-1.40 9���484 SPO-1154
100Hz-1Khz .75 1.40 RL/100Hz-1Khz/.75-1.40 9���485 SPO-1��8
100Hz-1Khz .80 1.40 RL/100Hz-1Khz/.80-1.40 9���486 SPO-1�74
Reflection Ring/Donut Probes
Frequency Range I.D. O.D. Description Part # Equivalent to Alcoprobe or SPO Probes
100Hz-10Khz .�0 .80 RRL/100Hz-10Khz/.�0-.80 9�����7 ARP/8/��PSPO-�0�1
100Hz-10Khz .40 .80 RRL/100Hz-10Khz/.40-.80 9���487 ARP/9.5/��PSPO-�1�1
100Hz-10Khz .50 1.�5 RRL/100Hz-10Khz/.50-1.�5 9�����8 ARP/1�.5/�1PSPO-�0�0
100Hz-10Khz .54 .88 RRL/100Hz-10Khz/.54-.88 9���488 ARP/1�.5/�4PSPO-�4�4
100Hz-10Khz .54 1.15 RRL/100Hz-10Khz/.54-1.15 9���489 ARP/1�.5/�9PSPO-�4��
100Hz-5Khz .6� 1.40 RRL/100Hz-5Khz/.6�-1.40 9���490 ARP/16/�6PSPO-�0��
100Hz-5Khz .6� 1.56 RRL/100Hz-5Khz/.6�-1.56 9���491 ARP/16/40PSPO-����
100Hz-5Khz .80 1.40 RRL/100Hz-5Khz/.80-1.40 9���49� ARP/�0/�6PSPO-�064
100Hz-5Khz .87 1.40 RRL/100Hz-5Khz/.87-1.40 9���49� ARP/��/�6PSPO-�4�5
�0 www .olympusNDT .com
Nortec® Standard Sliding Probes
How to Order:ProvidePartNumberandDescription
example: 9215653 SPo-3806 PartNumber Description
Sliding Probes
NORTECSPO-3806
NORTECSPO-2664
NORTEC
SPO-1958
NORTEC
SPO-1994
Fixed Type Adjustable Type
NORTEC® STaNDaRD SLIDING PROBES
Fixedandadjustabletypesareavailable.Operatinginthereflectionmode,theyallowinspectionoffastenerrowsforsurfaceandsubsurfacecracks.Slidingprobesaredirectionallysensitiveandfeatureengravedgreenlinestoassistscanorientationtotheexpecteddirectionofthecracks.Fixedtypesaremostlyusedinrivetedjointstodetectcracksemanatingfromholes.Penetrationissufficientforfuselagethicknessupto0.15”(4mm).Adjustabletypesareusedforthickerstructuresupto0.75”(19mm).Theyoperatesatisfactorilywithvariousfastenersincludingmagnetictypes.
Fixed Types
SPO # Part # Frequency Range Cable TypeProbe Size
LxWxHApplication
SPO-��10 9�06409 1Khz-100KhzMicrodot
(Dual)1.5”x0.5”x1.0”
Forsurfacecracksandsecondlayernearsurfacecracks.
SPO-�806 9�116�6 1Khz-100KhzCR/SC/6
(Detachable)1.5”x0.8”x1.0”
Forsurfaceandsecondlayercracks.
SPO-�99� 9�1618� 1Khz-100KhzCR/SC/6
(Detachable)1.7”x1.0”x1.�”
SameasSPO-�806butwillacceptlargerfastenerheads.
SPO-�664 9���060 1Khz-100KhzCR/SC/6
(Detachable)1.5”x.5”x1.0”
Forsurfacecracksandsecondlayernearsurfacecracks.
Adjustable Types
SPO-1958 9�06405 100Hz-50KhzMicrodot
(Dual)1.8”x1.0”x0.7” Penetrationupto0.5”
SPO-1994 9�06406 100Hz-�0KhzMicrodot
(Dual)�.�”x1.0”x0.8” Penetrationupto0.5”
SPO-1957 9�06404 100Hz-10KhzMicrodot
(Dual)�.8”x1.�”x0.9” Penetrationupto0.7”
Cables
Cable Part # Description Cable Part # Description
ForMicrodotType 9116184 SPO-�18� ForDetachableType 911�4�9 CR/SC/6
ForMicrodotType(RightAngle)
9116185 SPO-41�9ForDetachableType
(RightAngle)911�4�0 CR/RA/6
nortecsonic@olympusNDT .com �1
Nortec® PowerLink™ Sliding Probes
How to Order:ProvidePartNumberandDescription
example: 9222242 SPo-3806l PartNumber Description
NORTECSPO-3806
NORTECSPO-2664
NORTEC
SPO-1958
NORTEC
SPO-1994
Fixed Type Adjustable Type
NORTEC® POwERLINK™ SLIDING PROBES
Fixedandadjustabletypesareavailable.Operatinginthereflectionmode,theyallowinspectionoffastenerrowsforsurfaceandsubsurfacecracks.Slidingprobesaredirectionallysensitiveandfeatureengravedgreenlinestoassistscanorientationtotheexpecteddirectionofthecracks.Fixedtypesaremostlyusedinrivetedjointstodetectcracksemanatingfromholes.Penetrationissufficientforfuselagethicknessupto0.15”(4mm).Adjustabletypesareusedforthickerstructuresupto0.75”(19mm).Theyoperatesatisfactorilywithvariousfastenersincludingmagnetictypes.
Sliding Probes
fixed types
SPo # Part # frequency range
cable type Probe Size lxWxH application
SPO-��10L 9����41 1Khz-100Khz16pintoMicrodot
1.5”x0.5”x1.0”Forsurfacecracksandsecondlayer
nearsurfacecracks.
SPO-�806L 9����4� 1Khz-100Khz CL/SC/6 1.5”x0.8”x1.0” Forsurfacecrackssecondlayercracks.
SPO-�99�L 9����4� 1Khz-100Khz CL/SC/6 1.7”x1.0”x1.�”SameasSPO-�806but
willacceptlargerfastenerheads.
SPO-�664L 9��0101 1Khz-100Khz CL/SC/6 1.5”x.5”x1.0”Forsurfacecracksandsecondlayer
nearsurfacecracks.
adjustable types
SPO-1958L 9��0616 100Hz-50Khz16pintoMicrodot
1.8”x1.0”x0.7” Penetrationupto0.5”
SPO-1994L 9��0617 100Hz-�0Khz16pintoMicrodot
�.�”x1.0”x0.8” Penetrationupto0.5”
SPO-1957L 9��0618 100Hz-10Khz16pintoMicrodot
�.8”x1.�”x0.9” Penetrationupto0.7”
cables
cable Part # Description cable Part # Description
16pintoMicrodot 9��0�74 16pinLemotoDualMicrodot CL/SC/6 91��08� 16pinLemoto7pinLemo
�� www .olympusNDT .com
Nortec® PowerLink™ Sliding Probes
How to Order:ProvidePartNumber,Type,andFrequency
example: 9202932 3049a 100kHz PartNumber Type Frequency
Conductivity Probes
NORTEC® STaNDaRD CONDuCTIvITy PROBES
Conduct iv i ty probes are designed for sor t ing metals anda luminum a l loys , de te rmin ing hea t - t rea tment condi t ionor damage. These probes were developed for Nor tec®conductivityinstruments.StandardfrequencyoftheprobesfortheNDT-5and5Ais100KHz(60KHzmanufacturedatcustomerrequest).
These probes are suppl ied only wi th connectors for theinstruments specified, and are not interchangeable with otherinstruments.
P robes requi re ins t rument to be ca l ib ra ted by S tave leyInstruments’ServiceDepartmentforaccurateoperation.
*HeavyDutyCable
For Use With NDT-5 (8% to 110% IACS)
Part # Probe Frequency Diameter Length
9�0�9�� �049A 100KHZ .75” �0mm �.75” 70mm
9�0�9�5* �049E 100KHZ .75” �0mm �.75” 70mm
9�166�5 SPO-�897 100KHZ .�1” 8mm �.75” 70mm
For Use With NDT-5A (26% to 65% IACS)
9�0�9�� �049C 100KHZ .75” �0mm �.75” 70mm
9�0�9�4* �049D 100KHZ .75” �0mm �.75” 70mm
9�166�4 SPO-887 100KHZ .�1” 8mm �.75” 70mm
For Use With NDT-17 (24% to 65% IACS)
9�06106(1) SPO-�460 60KHZ .75” �0mm 1.00” �6mm
9�06414(�) SPO-1688 60KHZ .�1” 8mm �.75” 70mm
nortecsonic@olympusNDT .com ��
Nortec® PowerLink™ Conductivity Probes
How to Order:ProvidePartNumber,Type,andFrequency
example: 9222340 lt. Wt. conductivity Probe 60kHz PartNumber Type Frequency
Conductivity Probes
NORTEC® POwERLINK™ CONDuCTIvITy PROBES
Nortec®PowerLink™conductivityprobesaredesignedtobeusedwithNortec®1700,�000,�000,andWorkStationinstruments.Theyaredesignedforsortingmetalsandaluminumalloys,determiningheat-treatmentconditionordamage.
Standardfrequenciesoftheprobesis60Khzand480Khz.
Theseprobesaresuppliedwitha16pinLemoconnectorandarenotinterchangeablewithotherinstruments.
*NotforusewithNortec®�000instrument.
For Use With Nortec® 1700, 2000, 3000 and WorkStation (8% to 110% IACS)
Part # Description Frequency Diameter Height
9����40 Lt.Wt.60KhzConductivityProbe 60Khz 0.75” �0mm 1.0” �6mm
9����41* Lt.Wt.480KhzConductivityProbe 480Khz 0.75” �0mm 1.0” �6mm
9����60 SPO-887L60KhzConductivityProbe 60Khz 0.�1” 8mm �.75” 70mm
9����61* SPO-887L480KhzConductivityProbe 480Khz 0.�1” 8mm �.75” 70mm
�4 www .olympusNDT .com
ID Probes
NORTEC® ID PROBES
Theseprobeshaveacircumferentialwoundcoilavailableinthreecoilconfigurationsandtwobodystyles.ProbesareavailablewithorwithoutPowerLink®technology.
1.Absolutestyle-thesedetectchangesinconductivityandisusedtocheckforheattreatingandmonitoringwallthickness.
�.Differentialstyle-primarilyusedtodetectpits,cracksandinclusionsinsidetubes.
�.Switchable-thesecanbeusedineithermode.
Thereisnochargeforcablelengthsupto40’.Polyshaftsareincludedonallcablesunlessotherwisespecified.Duetothewidevarietyofsizesandfrequencies,IDprobesarebuilttocustomerspecificationswhenordered.
ID PROBE HOuSING STyLES (order using example charts)
•Straight Delrin-lowcostallplasticIDprobes,goodforusewithcleantubes.
• Stainless Steel-longlastingheavyduty,canbepushedorpulled.
NOTE: Diametersorderedwillbe the sizemanufacturedwithoutundersizing.Diameterordered shouldbeapproximately10%smallerthanthetubes’internaldiameter.Standardsizesrangefrom0.�80”to1.500”.Specifyoperatingfrequencywhenordering.Anyfrequencyfrom1kHzto�MHzcanbemanufactured.Specialsizes*canbebuilt,downto0.100”diameter.
*ContacttheSensorsDepartmentatStaveleyInstrumentsformoredetailsandreferencestandardavailability.
Nortec® ID Probes
Straight Delrin
ID/ D/ 5kHz / A/ .500/ 35
ProbeType Delrin FrequencyCoilType:absolute-(a)Differential-(D)
Switchable-(S)ProbeDiameter Lengthofpoly-coveredcable
Stainless Steel
ID/ SS/ 5kHz / A/ .500/ 35
ProbeType StainlessSteel FrequencyCoilType:absolute-(a)Differential-(D)
Switchable-(S)ProbeDiameter Lengthofpoly-coveredcable
PowerLink™ Technology Probes
IDL/ SS/ 5kHz / A/ .500/ 35
ProbeTypeHousingType:StainlessSteel(SS)Delrin(D)
FrequencyCoilType:absolute-(a)Differential-(D)
Switchable-(S)ProbeDiameter Lengthofpoly-coveredcable
nortecsonic@olympusNDT .com �5
OD Probes
NORTEC® OD PROBES
Theseprobeshaveencirclingtypecoilstosurroundrodsortubes.ODprobesareavailableinthreedifferentcoilconfigurations.
1.absoute style-Thesedetectchangesinconductivityandarealsousedinmonitoringtheheattreatingprocess.Theabsolutecoilcanalsobeusedtomonitorwallthicknesstodetectthinningintubewalls.
�.Differential style-Primarilyusedforpitandcrackdetection.
�.Switchable-Thesecanbeusedineithermode.
ODcoilsaremanufacturedwithlongwearingstainlesssteelfaceplates.Standardprobeholesizesrangefrom0.015”to1.50”.Duetothewidevarietyofsizesandfrequencies,ODcoilsaremanufacturedtocustomerspecificationswhenordered.
Nortec® OD Probes
How to Order:ProvideProbeType,Frequency,ProbeDiameter,andCoilType.
example: oD(1) /10kHz /.525 a ProbeType Frequency ActualProbeDiameter(�) CoilType: absolute-(a) Differential-(D) Switchable-(S)
(1)ToorderthePowerLink™versionofthisprobeorderas“ODL”
(�)Theamountofclearanceneededisdictatedbythefrequencyandmaterialtobeinspected.IfyouareunsurepleasecontacttheSensorsDepartmentatStaveleyInstrumentsformoredetails.
Probesaremanufacturedforeasymounting.Probesize,L=�.0”xW=1.�”xH=�.1”.
ThestandardprobesarefittedwithadetachableLemotriaxleconnector.PowerLinkT probeswillbefittedwitha7pinLemoconnector.Cablesaresoldseperately.Forstandardprobes(Lemotriaxial)usethestandarddetachablecableC/SC/6(P/N911�016).
ForPowerLink™ probesusethedetachablecableCL/SC/6(P/N91��08�).
�6 www .olympusNDT .com
GENERaL PuRPOSE KITS
TheNortec®probekitscontainfiveofourmostwidelyusedprobes,analuminumcrackstandardandablockofsixconductivitysamples.Thekitsareavailableineitherthestandardprobeserieswithintegral6’cableswith8pinBurndyconnectors,orthedetachableserieswithaC/SC/6cableincluded(8pinBurndy)
DETaCHaBLE TRaINING KIT
Thiskitcontainstwosurfaceprobes(coveringawidefrequencyrange),twopenciland twoboltholeprobes (absoluteanddifferential),onerightanglepencilprobe, twodetachablebridgecables (straightandrightangle),andoneSPO-�806slidingreflectionprobewithcable.Alsoincludedareasetofplasticshimstocks,analuminumcrackstandard,a thinning standard, a second layer crack standard, aTB-16 holestandard,andonesetofsixconductivitysamples.ThiskitisavailablewithDetachableProbesonly.
General Purpose Probe Kits
Nortec® Probe Kits
How to Order:ProvidePartNumberandDescription
example: 9216632 Standard Probe kit PartNumber Description
Standard Probe kit -Stock P/n 9216632 Detachable training kit -Stock P/n 9216655
1)9�04899 SP-10A10KHzSurfaceProbe 1)9�1�011 S/�00KHz-10KHz/.6�SurfaceProbe
1)9�0490� SP-100100KHzSurfaceProbe 1)9�1�01� S/1KHz-50KHz/.�1SurfaceProbe
1)9�04905 SP-500500KHzSurfaceProbe 1)9�1�01� P/100KHz-500KHz/A/90.5/6RightAnglePencilProbe
1)9�04915 �551F500KHzPencilProbe 1)9�1�014 P/500KHz-1MHz/APencilProbe
1)9�1�4�8 �551DF�MHzPencilProbe 1)9�1�015 P/500KHz-�MHz-DPencilProbe
1)190�474 SetofSixConductivitySamples 1)911�016 C/SC/66?CableStraightConnector
1)190�510 TB-SIAluminumCrackStandard 1)190�474 SetofSixConductivitySamples
CarryingCase 1)190�510 TB-SIAluminumCrackStandard
Detachable Probe kit -Stock P/n 9216633 1)5�19540 SetofPlasticShims
1)9�1�011 S/�00KHz-10KHz/.6�SurfaceProbe 1)190�477 TB-16HoleStandard
1)9�1�01� S/1KHz-50KHz/.�1SurfaceProbe 1)9�16156 B/100KHz-500KHz/A.�50BoltHoleProbe
1)9�1�01�P/100KHz-500KHz/A/90.5/6Right
AnglePencilprobe1)1916915
SPO-�9��SecondLayerCrackStandard(1/16”on1/16”Aluminumw/fasteners)
1)9�1�014 P/500KHz-1MHz/APencilProbe 1)9�16171 B/500KHz-�MHz/D.�50BoltHoleProbe
1)9�1�015 P/500KHz-�MHz/DPencilProbe 1)911�017 C/RA/66’CableRightAngleConnector
1)911�016 C/SC/66”CableStraightConnector 1)9�116�6 SPO-�806SlidingProbe
1)190�474 SetofSixConductivitySamples 1)1916914 SPO-4�04ThinningSample.0�9”to.164”
1)190�510 TB-S1AluminumCrackStandard CarryingCase
CarryingCase
nortecsonic@olympusNDT.com
Olympus NDT TECHNICALDATA SHEET
Calibration Screen
FrequencyHoriz GainVert GainPhase AngleLO FilterHI FilterHorizVert
Display Mode
Probe DriveContinuousSweep Mode
100 KHZ65.0 dB65.0 dB24.0100OFF67.5%50.0%MIDOFFSINGLE
INSTRUMENT SETTINGS
CALIBRATION INFORMATIONInstrumentInstrument Serial
Production Order Probe Model No.Probe Serial No.Probe Part No.Probe FrequencyTest StandardNotch Size
Comments:
NORTEC WORKSTATIONNM00G051042
M27515/1ML/100KHZ-500KHZ/A/90.5/6J068309222164100KHZ
.040TB-S1
Instrument Part No. 8500025.02
Technician
QA
Date & Time Tested 10/7/2003 2:26:48 PM
Date
Date
PROBE TEST DATA
Documentation
Probe DocumeNTaTioN
A Test Documentation Form is supplied with all standard Eddy Current Probes. Each probe is tested on a sample or standard relevant to the probe diameter and frequency, for proper signal response. In addition a Certificate of Conformance is available upon request.
Printed 9/2006© 2006 Olympus NDT, All Rights Reserved. *All specifications are subject to change without notice.Olympus and the Olympus logo are registered trademarks of Olympus Corporation. Innovation in NDT is a trademark if Olympus NDT Corporation. Nortec and Sonic are trademarks of Staveley Instruments Inc. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies.
www.olympusNDT.comTel: 509-736-2751Fax: 509-735-4672E-mail: nortecsonic@olympusNDT.com