ElectricalSnap action electrical switchrecognized by Underwriters’Laboratories, Inc. and CSAInternational

Electrical Connection1/2 NPT male conduit connectionwith PVC insulated 18 AWG,18" long leads

Process Connection1/2 NPT Male Direct mount

System Pressure1500 psig maximum

Proof Pressure2250 psigAdjustmentInternal, slotted adjustment nut with range scale

Temperature RangeAmbient: -40°F to +180°F

(-40°C to +82°C)Shipping WeightApproximately 2.5 pounds

Neo-Dyn® Series 132T Temperature Switch/ Internal Adjustment

Operating Temperature Data

Standard Specifications Ordering Sequence — Select desired option for each category

Compact, adjustable, direct mount temperature switch featuring the efficient Nega-Rate® Belleville disc spring for set pointstability and vibration resistance.

When factory presetting is desired,stipulate set point, increasing ordecreasing

Insert available option letterdesignation as required

SeriesWetted MaterialAdjustable RangeElectrical FormEnclosureMiscellaneous

132T

OPTIONSWetted Material4 300 Series stainless steel port and probe assembly, Teflon seal

Adjustable RangeB -69°F dec. to +30°F inc.D +7°F dec. to +125°F inc.F +70°F dec. to +200°F inc.H +89°F dec. to +230°F inc.J +146°F dec. to +300°F inc.L +236°F dec. to +360°F inc.N +263°F dec. to +395°F inc.

Electrical FormC 11 amp, 1/4 hp at 125 or 250 VAC; 5 amp resistive, 3 amp inductive at 28 VDC;

.5 amp resistive at 125 VDCCC 11 amp, 1/4 hp at 125 or 250 VAC; 5 amp resistive, 3 amp inductive at 28 VDC;

.5 amp resistive at 125 VDC

Enclosure3 Meets or exceeds the requirements of NEMA Type 3, 3R, 3S, 4, 4X and 13

MiscellaneousA Epoxy paint exterior — extra protection for severe environmentsD SIL approval and marking, per IEC61508 (includes FMEA report)I 3/4 NPT conduit box with terminal stripJ Annealed stainless steel port screws for H2S environmentsM Gold electrical contacts for extremely low current applicationsR 72" Electrical free leadsX CE Mark

Special (Consult representative or factory)• Thermowells• Non-catalog adjustable range and/or set point and deadband• Non-standard probe lengths

AdjustableRange

BDFHJLN

Adjustable Set Point Range

Increasing °F-50 to +30+30 to +125+95 to +200

+115 to +230+175 to +300+260 to +360+290 to +395

Decreasing °F-69 to +26+7 to +121

+70 to +196+89 to +224

+146 to +294+236 to +356+263 to +391

†Deadband decreases as the adjustable set point is increased. For narrow deadband select set point in upper half of adjustable range.

4B CC3 _

Ordering Procedure Example

Weather Proof(NEMA 4 and 13)

19/423/425/426/629/624/427/4

250300400400500500500

11 / 213 / 214 / 214 / 316 / 313 / 215 / 2

121149204204260260260

Proof TemperatureDeadband† (approx) Bottom/Top

(-56°C dec. to -1°C inc.)(-14°C dec. to 52°C inc.)(21°C dec. to 93°C inc.)(32°C dec. to 110°C inc.)(63°C dec. to 149°C inc.)(113°C dec. to 182°C inc.)(128°C dec. to 202°C inc.)

°F °C °F °C

Neo-Dyn®

Order MiscellaneousOption “D”

132T_132T.QXD 1/18/2018 2:34 PM Page 1

1.50 SQ

.56

.25

1.12

Pressure Port¹⁄x NPT

Conduit Connection¹⁄x NPT

.209 Dia. Mtg.Holes (2 places)

Free Leads18 AWG18" Long

5.92Max.

1.6 AdjustmentCover

3.5

Temperature Probe

Negative RateBellevilleDisc Spring

Snap ActionElectricalElement

AdjustmentActuator

Minimum Bearing Points

aá~éÜê~Öã

mêÉëëìêÉ=mä~íÉ

Series 132TField Adjustable -69°F to +395°F

Envelope Dimensions

Electrical Form

Basic Principles of Design

FORM "C"(SPDT)

RED

BRN

BLU

NC1

INCT

C1

NO1

(X-Option) GRN

FORM "CC" (DPDT)

RED

BRN

BLU

BLK

YEL

VIO

NC1

INC T

C1

NO1

NC2

C2

NO2

GRN

Pressure Port½ NPT

Conduit Connection½ NPT

Neo-Dyn®

28150 Industry DriveValencia, CA 91355tel: 864-647-9521fax: 864-647-9574www.neodyn.com Specifications and dimensions subject to change.

AER0935_26 7/13

132T_132T.QXD 1/18/2018 2:35 PM Page 2