Ned Kelly'...Ned Kelly TM cL,--y Zinc finish Black powder coat finish Features • Each rail...

Post on 25-Dec-2019

2 views 0 download

Transcript of Ned Kelly'...Ned Kelly TM cL,--y Zinc finish Black powder coat finish Features • Each rail...

600mm

700mm

SIDE

Locking Points

Ned Kelly'" "

Zinc finish Black powder coat finish

Features

• Each rail provides storage for a single bike

• Suits bikes with full length mud guards

• Available in Zinc finish or Black powder coat over mild steel

• Provides the ability to lock the main frame and one wheel

• Support prongs with protective coating prevent damage to rim

• Can be used with custom framing - no wall needed

Dimensions

FRONT

Specifications Material options

- Zinc finish

- Black powder coat over mild steel

- Stainless steel - Pre-order only

Fixing options

- Bolt on to wall

- Fixed to support framing

Recommended fasteners - wall

- Dynabolts (M8 x 40mm)

- Shear Nut security fasteners

Recommended fasteners - framing

- Bolt and nut (M10 x 60mm)

- Tek screws

Dimensions

125mm [w] x 700mm [h] x 600mm [d]

V41 -1/05/2017 I Specification may be subject to change without notice. ©Bicycle Network

w BIKE BICYCLE PARKING NE W

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking®bicyclenetwork.comau blkeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5.18-20 Cavenagh Street, Darwin 0800

390mm spacing. For less Men 7 Ned Keay bke racks,

cut down honzcotals by 390mm per mck Option 1:

390mm

Fitting 4 Ned Kellys to a wall

Tyrics Boyce Length

Option 2: 2810mm

Fitting 7 Ned Kellys to a Duragal steel frame

Fixing options

Fix to a wall using 4x fasteners or Shear Nuts

Shown with M8 x 40mm fastener

Shown with M8 x 40mm Shear Nuts

Fix to a frame using 4x bolts or Tek Screws

Min \\\\\ \1111,%

Shown with M10 x 60mm Bolt, Washer & Nut

Shown with Tek Screw

Layout guidelines 400rnm minimum lwa. to camel

400mm minimum fame to camel

V41 - 1/05/2017 ' Specification may be subject to change without notice. ©Bicycle Network

v BIKE BICYCLE PARKING NETWORK`

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p 1300 727 563 e. parking@bicyclenetwork.com.au blkeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

600mm

700mm

SIDE

Locking Points

Ned Kelly'"

Zinc finish

Black powder coat finish

Features

• Each rail provides storage for a single bike

• Suits bikes with full length mud guards

• Available in Zinc finish or Black powder coat over mild steel

• Provides the ability to lock the main frame and one wheel

• Support prongs with protective coating prevent damage to rim

• Can be used with custom framing - no wall needed

Dimensions

FRONT

Specifications Material options

- Zinc finish

- Black powder coat over mild steel

- Stainless steel - Pre-order only

Fixing options

- Bolt on to wall

- Fixed to support framing

Recommended fasteners - wall

- Dynabolts (M8 x 40mm)

- Shear Nut security fasteners

Recommended fasteners - framing

- Bolt and nut (M10 x 60mm)

- Tek screws

Dimensions

125mm [w] x 700mm [h] x 600mm [d]

V4.1 -1/05/2017 I Specification may be subject to change without notice. ()Bicycle Network

v BIKE BICYCLE PARKING NETWORK'

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au blkeparkIng.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

Shown with M10 x 60mm Bolt, Washer & Nut Shown with Tek Screw

400mrn mirarnum [web cote)

400mn minimum icenes to mans)

Layout guidelines

390mm spacing. For less than 7 Ned Keay tyke rad.,

as down horizontals by 393rnm per rack

390mm lame le camel

',you, Bevels Length

Option 2: 2810mrn

Fitting 7 Ned Kellys to a Duragal steel frame

Option 1:

Fitting 4 Ned Kellys to a wall

V41 - 1/05/2017 I Specification may be subject to change without notice. @Bicycle Network

► Fixing options

Fix to a wall using 4x fasteners or Shear Nuts

Shown with M8 x 40mm fastener

Shown with M8 x 40mm Shear Nuts

Fix to a frame using 4x bolts or Tek Screws

V BICYCLE NE'WORK'

BIKE PARKING

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au bikeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

600mm

700mm

SIDE

Locking Points

Ned Kelly TM cL,--y

Zinc finish

Black powder coat finish

Features

• Each rail provides storage for a single bike

• Suits bikes with full length mud guards

• Available in Zinc finish or Black powder coat over mild steel

• Provides the ability to lock the main frame and one wheel

• Support prongs with protective coating prevent damage to rim

• Can be used with custom framing - no wall needed

Dimensions

FRONT

Specifications Material options

- Zinc finish

- Black powder coat over mild steel

- Stainless steel - Pre-order only

Fixing options

- Bolt on to wall

- Fixed to support framing

Recommended fasteners - wall

- Dynabolts (M8 x 40mm)

- Shear Nut security fasteners

Recommended fasteners - framing

- Bolt and nut (M10 x 60mm)

- Tek screws

Dimensions

125mm [w] x 700mm [h] x 600mm [d]

V41 -1/05/2017 I Specification may be subject to change without notice °Bicycle Network

v BIKE BICYCLE PARKING TWO St

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903 p. 1300 727 563 e. parking@bicyclenetwork.com.au blkeparklng.com.au VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010 TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

390mrn spacing Fm less than 7 Ned Kelly bke racks,

cut down honzcertals by 390mm per rack

'Woo Boyce Lenart

Option 2: 2810arn

Fitting 7 Ned Kellys to a Duragal steel frame

Option 1:

Fitting 4 Ned Kellys to a wall

Fixing options

Fix to a wall using 4x fasteners or Shear Nuts

Shown with M8 x 40mm fastener

Shown with M8 x 40mm Shear Nuts

Fix to a frame using 4x bolts or Tek Screws

I \\\\\\\,\\„,,,,

Shown with M10 x 60mm Bolt, Washer & Nut

Shown with Tek Screw

Layout guidelines enamel minimum 1.we to colt*

400Tren minimum (case to owe.

V4.1 -1/05/2017 I Specification may be subject to change without notice. ©Bicycle Network

v BIKE BICYCLE PARKING NE WORK•

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p 1300 727 563 e. parking@bicyclenetwork.com.au bikeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

FRONT

600mm

700mm

SIDE

Ned Kelly TM

Immo

Black powder coat finish

Features

• Each rail provides storage for a single bike

• Suits bikes with full length mud guards

• Available in Zinc finish or Black powder coat over mild steel

• Provides the ability to lock the main frame and one wheel

• Support prongs with protective coating prevent damage to rim

• Can be used with custom framing - no wall needed

Dimensions

Specifications Material options

- Zinc finish

- Black powder coat over mild steel

- Stainless steel - Pre-order only

Fixing options

- Bolt on to wall

- Fixed to support framing

Recommended fasteners - wall

- Dynabolts (M8 x 40mm)

- Shear Nut security fasteners

Recommended fasteners - framing

- Bolt and nut (M10 x 60mm)

- Tek screws

Dimensions

125mm [w] x 700mm [h] x 600mm [d]

Locking Points

V4.1 - 1/05/2017 I Specification may be subject to change without notice. COBicycle Network

v BIKE BICYCLE PARKING W

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au blkeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

390mm spacing. For Yea then 7 Ned Key eke racks,

art down now:etas by 39(171M per rack

39Ornm lumen, wed

Shown with M10 x 60mm Bolt, Washer & Nut Shown with Tek Screw

4c01-nn minimum Palm onwl

400rnm mrxrnurn *wan loco** Layout guidelines

Option 2: 281Ornm law Beide Leryth

Fitting 7 Ned Kellys to a Duragal steel frame

V41 - 1/05/2017 I Specification may be subject to change without notice. @Bicycle Network

Option 1:

Fitting 4 Ned Kellys to a wall

Fixing options

Fix to a wall using 4x fasteners or Shear Nuts

Shown with M8 x 40mm fastener Shown with M8 x 40mm Shear Nuts

Fix to a frame using 4x bolts or Tek Screws

v BIKE BICYCLE PARKING NETWORK'

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p 1300 727 563 e. parking@bicyclenetwork.com.au blkeparkIng.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

750mrr 750mm

200mm Concrete footing Welded base plate

900mm 900mm

Flat Top`"

Galvanised finish/Stainless Steel finish

Features

Dimensions

• Each rail supports two adult bikes in an upright position

• Can be either bolted to a concrete slab or concreted in situ

• Available in stainless steel or galvanised steel

• Provides the ability to lock both wheels and frame

• Suitable for interior and exterior use

Specifications Material options

- Galvanised (Duragal)

- 316 Marine grade stainless steel

Fixing options

- Welded flange - Bolt on

- In situ

Recommended fasteners

- Galvanised Dynabolts (M10 x 65mm)

- Stainless Dynabolts (M10 x 65mm)

- Shear Nut security fasteners

Dimensions

950mm [w] x 750mm [h]

Locking Points

V4.1 - 1/05/2017 I Specification may be subject to change without notice. ggicycle Network

IF BIKE PARKING

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au bikeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5, 18-20 Cavenagh Street, Darwin 0800

BICYCLE NETWORK'

Welded flange (Bolt on) using 4 (total) x fasteners In situ (Concrete footing)

Shown with M10 x 65mm fastener

Welded flange (Security heads) using 4 (total) x fasteners

Shown with M10 x 65mm Shear Nuts

Layout guidelines

1 OCOrnm On. tO =NM

Option 2:

Footing Width 1200mm Angle 45°

iyoica Bicycle Length

1700mm

Option 1:

Footing Width 1700mm Angle 0°

V4.1 -1/05/2017 I Specification may be subject to change without notice. ©Bicycle Network

120mm

290mm

100mm

Fixing options

v BIKE BICYCLE PARKING NETWORK'

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au bikeparking.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

700mm

SIDE FRONT

• Each rail provides storage for a single bike

600mm

Locking Points

Ned KellyTm

Zinc finish

Black powder coat finish

Features Dimensions

• Suits bikes with full length mud guards

• Available in Zinc finish or Black powder coat over mild steel

• Provides the ability to lock the main frame and one wheel

• Support prongs with protective coating prevent damage to rim

• Can be used with custom framing - no wall needed

Specifications Material options

- Zinc finish

- Black powder coat over mild steel

- Stainless steel - Pre-order only

Fixing options

- Bolt on to wall

- Fixed to support framing

Recommended fasteners - wall

- Dynabolts (M8 x 40mm)

- Shear Nut security fasteners

Recommended fasteners - framing

- Bolt and nut (M10 x 60mm)

- Tek screws

Dimensions

125mm [w] x 700mm [h] x 600mm [d]

V41-1/05/20171 Specification may be subject to change without notice. ()Bicycle Network

BIKE

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au blkeparkIng.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800

BICYCLE NE TWOIK' PARKING

39(Amm spacing. For

we than 7 Ned key b■ke racks,

cut doer/ houontals by 390mm per rack

39Ornm [canoe to ant*

Fitting 7 Ned Kellys to a Duragal steel frame

Shown with M10 x 60mm Bolt, Washer & Nut Shown with Tek Screw

400mm minimum 1.010 come]

400mm minimum (cam,e to cams] Layout guidelines

rYn'ca, Ocroa Limon

Option 2: 2810rnm

11 ilk\\\\"\\\ \\P

Option 1:

Fitting 4 Ned Kellys to a wall

Fixing options

Fix to a wall using 4x fasteners or Shear Nuts

Shown with MB x 40mm fastener

Shown with M8 x 40mm Shear Nuts

Fix to a frame using 4x bolts or Tek Screws

V41 - 1/05/2017 i Specification may be subject to change without notice. @Bicycle Network

v BIKE BICYCLE PARKING NETWORK'

DESIGN. SUPPLY. INSTALL. Bicycle Network ABN 41 026 835 903

p. 1300 727 563 e. parking@bicyclenetwork.com.au blkeparkIng.com.au

VIC Level 4, 246 Bourke Street, Melbourne VIC 3000 NSW 234 Crown Street, Darlinghurst NSW 2010

TAS 210 Collins Street, Hobart TAS 7000 NT Suite 5,18-20 Cavenagh Street, Darwin 0800