Post on 24-Mar-2016
description
Thermal Tranfer Printer R1500 ECO
Technical features:
Overall size: 240x100x120
Printing area: 15x30 mm
Type holder groove: double groove for 5-mm high type, maximum 13 types per groove
Number of heads: 1
Speed: strokes/min: up to 25
Thermal transfer ribbon reel: maximum diameter: 80mm
Film speed: fixed (not adjustable)
Heating resistance power supply: 220V 50 Hz
Operating pressure: 4-6 bar
Printing command: any free contact
Electrical junction box: included
Structure all in Inox AISI 304
Completely assembled in Italy using components of EU origin only.
A very compact machine designed to be sturdy and reliable; a single cylinder which is resistant to high temperatures carries out printing and ribbon take-up.
The electrical panel holds a card designed in compliance with all the safety requirements envisaged in the European Machinery Directive.
Regulation by means of dedicated delay timers for the starting of printing and duration of the same.
MR Engineering Via Monteverdi ,4 Reggio Emilia (RE) ITALY
info@mr-engineering.it mrengineering@libero.it www.mr-engineering.it
Thermal Tranfer Printer R3000
Technical features:
Overall size: 190x105x110
Printing area: 15x30 mm (head for character can be placed vertical or horizontal)
Type holder groove: double groove for 5-mm high type, maximum 13 types for every groove
Number of heads: 1
Speed: strokes/min : up to 50
Thermal transfer ribbon reel: maximum diameter: 80mm
Film speed: adjustable
Heating resistance
power supply: 220V 50 Hz
Operating pressure : 4-6 bar
Printing command: any free contact
Electrical junction box: included
Structure all in Inox AISI 304.
Completely assembled in Italy using components of EU origin only.
A very compact machine designed to be sturdy and reliable; a cylinder resistant to high temperatures leaving stamping and a second cylinder performing the recovery of the tape, both independently adjustable.
The electrical panel holds a card designed in compliance with all the safety requirements envisaged in the European Machinery Directive.
Regulation by means of dedicated delay timers for the starting of printing and duration of the same.
Mechanical adjustments simple.
MR Engineering Via Monteverdi ,4 Reggio Emilia (RE) ITALY
info@mr-engineering.it mrengineering@libero.it www.mr-engineering.it
RP Emboss Coder
Technical features
Printing area: 15x30 mm
Type holder groove: double or triple groove for 5-mm high types, maximum 13 types
per groove
Number of heads: 1
Speed: strokes/min: up to 30
Operating pressure: 4-6 bar
Solenoid valve: on request
Completely assembled in Italy using components of EU origin only.
Compact machine, designed to be sturdy and reliable.
The RP is a paper label emboss coder for use on intermittent motion packaging machines.
The printer is equipped with a compact anti-rotation cylinder, two flow regulators for adjusting cylinder operating intensity.
The type holder is easy to extract.
The main support has been designed so that the printer can be installed to print every 90°.
Emboss coding does not require any consumables such as cartridges or ink, making it a very cheap printing solution.
MR Engineering Via Monteverdi, 4 - 42100 Reggio Emilia (RE) Italy Tel. +39 3311698608 Fax +39 0522015310 Technical Assistance +39 3933868047 VAT ITA 02450880352 info@mr-engineering.it www.mr-engineering.it
RT120 Ink Printer
Technical features
Printing area: 38x38 mm
Type holder base: four rows for 3-mm rubber types
Speed: strokes/min: up to 120
Operating pressure: 2-4 bar
Solenoid valve: on request
Indicative weight: 1.5 Kg
Completely assembled in Italy using components of EU origin only.
Ideal machine for quality marking, compact and designed to be solid and reliable.
The RT 120 is a printer for still products such as labels in intermittent motion packaging machines or any kinds of packs.
The printer is equipped with a cylinder fitted with a fine-tuning slide base for approaching the product to be printed and two flow regulators which make it possible to adjust the operating pressure of the type holder base.
The rubber types are easy to manage and are simply pushed into the holder.
The main support is designed to make it possible to install the printer in such a way as to print in any position and at any angle.
Printing can be carried out with fast- or slow-drying ink to meet all needs.
Low operating costs.
MR Engineering Via Monteverdi, 4 - 42100 Reggio Emilia (RE) Italy Tel. +39 3311698608 Fax +39 0522015310 Technical Assistance +39 3933868047 VAT ITA 02450880352 info@mr-engineering.it www.mr-engineering.it
For more details:
MR ENGINEERINGVia C.Monteverdi,4
42124 Reggio Emilia (ITALY)Email: info@mr-engineering.itEmail: mrengineering@libero.itWebsite: www.mr-engineering.itWebsite: www.mr-engineering.it
For more details:
MR ENGINEERINGVia C.Monteverdi,4
42124 Reggio Emilia (ITALY)Email: info@mr-engineering.itEmail: mrengineering@libero.itWebsite: www.mr-engineering.itWebsite: www.mr-engineering.it