Model PT-1 Model US-7 Ultravet Canine Phototherapy unit ... · TGS Electronics Pty Ltd Unit 4/5...

Post on 27-Jun-2020

36 views 0 download

Transcript of Model PT-1 Model US-7 Ultravet Canine Phototherapy unit ... · TGS Electronics Pty Ltd Unit 4/5...

TGS Electronics Pty LtdUnit 4/5 Ladd RoadGisborne Industrial EstateNew GisborneVictoria 3438AustraliaPh: (03) 5428 4122Fax: (03) 5428 4050Email: tgs@tgselectronics.com.auWeb: www.tgselectronics.com.auABN 40 004 907 788

Model US-7 Ultravet CanineVeterinary Ultrasound Unit

Power Supply: 16 volts AC Plugpack.

Power Consumption: 25 watts at maximum output.

Operating Frequency: 1.0 MHz ± 5% .

Maximum Output: 3 watts/sq cm. (15 acoustic watts).

Output Mode: Pulsed at 4:1 ratio and continuous signal.

Pulse Repetition: 50 Hz.

Applicator: 5 sq. centimetres of active area.

Timer: 3 and 6 minute switchable timer.

Weight (generator): 2.75 Kg nett.

Dimensions: 200mm x 140mm x 70mm.

FeaturesFeatures

SpecificationsSpecifications

Designed and constructed to meet the relevant Australian Standards requirements

Straightforward controls for simple operation. Pulsed or Continuous output. 3 and 6 minute timer andvariable output to full 15 acoustic watts ( 3 watts per cm. sq.).

Lightweight applicator which is hermetically sealed for subaqueous operation and which remainscool under all treatment conditions.

Compact modern design and all metal construction gives excellent reliability and durability.

Comprehensive operating manual.

2 Year Warranty.

Full backup service available.

– Optional Hard Carrycase.

TGS Electronics Pty LtdUnit 4/5 Ladd RoadGisborne Industrial EstateNew GisborneVictoria 3438AustraliaPh: (03) 5428 4122Fax: (03) 5428 4050Email: tgs@tgselectronics.com.auWeb: www.tgselectronics.com.auABN 40 004 907 788

Model PT-1 Phototherapy unit

Power Supply: 7.2Volt Ni-MH Rechargable Internal Battery Pack.

Timer: 30 to 180 seconds, selectable in 30 second dosages.

Operating Frequency: 1600HZ.

Base Frequency: 50Hz or 200Hz, selectable.

Applicator ( PT4A ): Super Lumenesent Diodes - 650nm @ 50mW x 2- 950nm @ 100mW x 2

Generator Weight: 550 gms

Generator Dimensions: 185 x 135 x 55mm (L x W x H)

FeaturesFeatures

SpecificationsSpecifications

Distributed by:

Designed and constructed to meet the relevant Australian Standards requirements

Straightforward touch panel controls for easy operation.

Rechargable Battery operated with Low Battery warning.

Safety Key Power Switch.

Variable Treatment / Dosage timer.

Switchable Output Frequency.

Inbuilt Phototherapy Output Test feature.

Lightweight PT4A (4 Diode) Phototherapy Applicatorincluded as standard.

High Quality Safety Goggles included.

Comprehensive operating manual.

Full 2 Year Warranty.

Complete backup service available.

– Optional Hard Carrycase to protect the unit.

TGS 4PP FLYER 6/06/12 8:34 PM Page 1

Model MP-9Pulsed Magnetic Field Therapyplus Phototherapy (optional)

• Magnetic Field therapy andoptional Phototherapy - bothin one convenient package.

• Built-in Phototherapyinfrared emitter test facility.

• Dual Base-Frequencies.

• 12 Pulse Rates available foraccurate treatment control.

• Variable treatment duration.

• Treatment “Hold” facility

• Therapeutic MagneticBlanket applicator asstandard equipment

• Ergonomically designed forease of operation and ruggedconstruction for reliabilityand durability.

• Comprehensive operatingmanual.

• 2 Year Warranty

• Power Supply:240 volts - 50 Hz (117 voltsupon request).

• Power Consumption:120 watts at maximum output

• Timer: Variable at 5, 10, 20, 40 and80 minutes.

• Dual Base Frequencies:50 and 200 Hz.

• Pulse Rates:1, 2, 3, 4, 5, 6, 7, 8, 10, 12,17.5, 25 and 50 Hz.

• Dimensions:Generator 110 x 235 x270mm Blanket 760 x510mm.

• Weight (generator):3.0Kgs.

• Extension Cables

• Model PTA-4 Phototherapyapplicator (4 emitters).

• Model PTA-15 Phototherapyapplicator (15 emitters).

• Leather covered applicators.

FeaturesFeatures SpecificationsSpecifications Options AvailableOptions Available

Designed and constructed to meet the relevant Australian Standards requirements

Model ET-4Faradic Stimulator

The model ET-4 Faradic stimulator canbe used as both a diagnostics and as atherapeutic tool.

By exercising individual muscles,injuries can be located. Muscles canthen be exercised increasing bloodflow into the injured area to assist withhealing. In the case of withered andweak muscles, their strength anddurability can be increased throughindividual exercising.

Light weight, very compact and with abuilt-in belt clip

Rechargeable battery operation forcomplete portability.

Variable frequency control allows theoutput to be fine-tuned to maximise theeffectiveness of each treatment.

• Power Supply:9V DC (Rechargeable Battery)12 hours continuous operation

• Output:Impedance 5000 ohmsVoltage 0-300 VoltsPolarity Undirectional

• Frequency: 15-35 Hz

• Pulse:Rise Time 5 microsecondsFall Time 400 microsecondsLeading Edge Square WaveTrailing Edge Half Sine Wave

• Envelope Repetition Rates:10 per second5 per second1 per 2.5 seconds1 per 5 seconds

• Weight (generator):350 gms

• Dimensions:50mm x 95mm x 150mm

FeaturesFeatures SpecificationsSpecifications

Designed and constructed to meet the relevant Australian Standards requirements

CanineCanine

TGS 4PP FLYER 6/06/12 8:34 PM Page 2