Post on 07-Sep-2019
FIRST ANGLE PROJECTION
6 PLCS9.6
268
31 55
272
368
439
330
134
166
211
CONNECTED406
43
43
11
65
223
85
123
65
35 TEST50 DISCONNECTED
371 TO DOOR
25
20
15
43
11
49.5
6
32.5
65
R3
11 13
11
1143
1143
117
49.522.5
2065
15
20
2513
65
REVISIONS
REV. DESCRIPTION DATE APPROVED
1 R1202498 PRASAD 11-30-12 GUPTA
2 C009606 12-30-2015 JOBY
Article or Material Must Conform to REACH Procedure SI900000 Sec. 14
Article or Material Must Conform to RoHS Procedure SI900000 Sec. 13
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
21
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776 2SCALE: 1:5 REF. No: . SHEET 1 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
CENTRE LINE OFOPERATING PANEL
CENTRE LINE OF
OPERATING PANEL
FASCIA CENTRE
FASCIA CENTRE
275 FULLY WITHDRAWN
CENTRE LINE OFOPERATING PANEL
ADAPTOR UPTO 1600A
ADAPTOR UPTO 2500A
PV1
FIRST ANGLE PROJECTION
111
12
107
20
421 421
65
100
100100
100
20
1525
1313
1525
20
234 230
65
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
2
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776SCALE: 1:5 REF. No: . SHEET 2 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
1 R1202498 PRASAD 11-30-12 GUPTA
2 C009606 12-30-2015 JOBY
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
22
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776 2SCALE: 1:5 REF. No: . SHEET 2 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
1600A HORIZONTAL 2500A HORIZONTAL
PV1
FIRST ANGLE PROJECTION
421
85
65
421
85
65
65
100
100
65
100
100
25
20
15
13
25
20
15
13
208208
2012
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
3
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776SCALE: 1:5 REF. No: . SHEET 3 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
1 R1202498 PRASAD 11-30-12 GUPTA
2 C009606 12-30-2015 JOBY
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
23
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776 2SCALE: 1:5 REF. No: . SHEET 3 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
1600A VERTICAL2500A VERTICAL
PV1
FIRST ANGLE PROJECTION
421
85
230
20
65
2025
15
13
421
85
12
23465
2025
15
13
65
100
100
100
100
65
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
4
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776SCALE: 1:5 REF. No: . SHEET 4 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
1 R1202498 PRASAD 11-30-12 GUPTA
2 C009606 12-30-2015 JOBY
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
24
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776 2SCALE: 1:5 REF. No: . SHEET 4 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
2500A TOP HORIZONTAL & BOTTOM VERTICAL1600A TOP HORIZONTAL & BOTTOM VERTICAL
PV1
FIRST ANGLE PROJECTION
421
20
65
20
25
15
13
107
208
421
111
208
65
13
25
1512
65
100
100
100
100
20
65
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
5
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776SCALE: 1:5 REF. No: . SHEET 5 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
1 R1202498 PRASAD 11-30-12 GUPTA
2 C009606 12-30-2015 JOBY
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
METRIC
METRICGE PROPRIETARY AND CONFIDENTIAL INFORMATION
This document is the property of General Electric Company ("GE") and contains proprietary information of GE. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without the express written consent of GE Energy, and that
the information shall be used by the recipient only as approved expressly by GE Energy. This document shall be returned to GE upon its request.
This document may be subject to certain restrictions under U.S. export control laws and regulations.
SIZE
DRAWING NO.
REV
SHEET
A3
10110776
25
SIGNATURES DATE
MODEL PRASAD 09-05-12
DETAIL PRASAD 09-05-12
CHECKED RIZWAN 09-05-12
ENGRG . .
MFG . .
QUALITY . .
ISSUED . .DRAWING FILE: 10110776PV1SOLID MODEL: 10110776PV1
GE EnergyTITLE ENTELLIGUARD L - TYPE S
400A -2500A
FRAME 1 , 3 POLE DRAWOUTSIZE DRAWING REV
A3 10110776 2SCALE: 1:5 REF. No: . SHEET 5 OF 5CRITICAL TO QUALITY
CHARACTERISTIC
.FINISH
.FRACTIONS �#�
TOLERANCE ON:
1 PL DECIMALS �#� 0.3
2 PL DECIMALS �#� 0.13
ANGLES �#� 0.5
UNLESS OTHERWISESPECIFIED IN DRAWING
DIMENSIONS ARE IN MILLIMETERS
.APPLIED PRACTICES
FOR ADDITIONAL INFO REFER TO:
REVISIONS
REV. DESCRIPTION DATE APPROVED
Part must conform to SI 900000 Sect. 4, Toxicity Procedure
2500A TOP VERTCAL & BOTTOM HORIZONTAL1600A TOP VERTCAL & BOTTOM HORIZONTAL
PV1