Post on 04-Feb-2022
2
Intertek Microbiological Media MSDs
Index
1.) API Growth Media……………………………………………………………………………Page 3
2.) Sterile Fuel (BTM2) Dipslide………………………………………………………………..Page 6
3.) GHB PRD Growth Media…………………………………………………………………….Page 9
4.) Iron Utilising Bacteria Medium (IUBM)…………………………………………………...Page 12
5.) MPB Growth Media…………………………………………………………………………..Page 15
6.) Sterile Maximum Recovery Diluents (MRD)……………………………………………..Page 19
7.) NOB Growth media…………………………………………………………………………..Page 23
8.) NRB Growth Media…………………………………………………………………………...Page 27
9.) Oil-Degrading Bacteria Medium (sterile)………………………………………………....Page 30
10.) Phosphate Buffered Saline (PBS)………………………………………………………..Page 34
11.) Sterile Seawater Diluents………………………………………………………………….Page 37
12.) Thioglycollate Growth Media (TGC) …………………………………………………….Page 40
13.) TRB Growth Media………………………………………………………………………….Page 44
14.) Zinc Acetate………………………………………………………………………………….Page 47
3
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: API Growth Media
Appearance: Light straw-coloured liquid with precipitate
(may also contain a nail)
Section 2 Composition
Yeast less than 1.0 %
Inorganic salts less than 3.0 %
Mercaptoacetic acid less than 0.02 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open.
Seek medical advice if soreness persists.
Product ingested Wash out mouth with water
Product inhaled Remove from exposure
4
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: API media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity:
< 0
100
pH: 7.3
Does not flash
N/D
N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
5
Section 12 Ecological Information
Not applicable
Section 13 Disposal
disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations, published by the Institute of Corrosion, 1992.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
6
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Sterile Fuel (BTM2) Dipslide
Section 2 Composition
Polystyrene tube, containing polyethylene paddle coated with agar culture
Section 3 Possible Hazards
Not classified as hazardous
Section 4 First Aid Measures
Eyes: Wash out with plenty of water
Skin: Wash skin with soap and water
Ingestion: Wash out mouth with water. Drink 1-3 glasses of water
to dilute stomach contents.
Section 5 Fire-fighting Measures
Burns to give off toxic fumes
Section 6 Accidental Release or Spillage Procedure
No precautions necessary
7
Section 7 Handling and Storage
Store in a cool dry place
Section 8 Exposure Controls and Personal Protection
Protective Measures - Hands: Disposable vinyl gloves
Section 9 Physical and Chemical Properties
Form: Solid
Colour: Varies with product
Section 10 Stability and Reactivity
Stable, non-reactive.
Section 11 Toxicology Properties
Non-toxic when sterile. Used slides may carry live bacterial organisms
Section 12 Ecological Information
Not applicable
Section 13 Disposal
Used product should be disinfected before disposal
Section 14 Transport Information
Non-hazardous when sterile
UN: UN Number Not classified
Section 15 Regulatory Information
8
Risk Phases: Not applicable
EC Classification: Not classified
Section 16 Other Information
Culture media contains antibiotic or irritant supplements in low concentration. Avoid handling
agar gel. Do not ingest.
The information contained herein is based on the present state of our knowledge and does not
therefore guarantee certain properties. Recipients of our product must take responsibility for
observing existing laws and regulations.
9
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: GHB PRD Growth Media
Appearance: Red transparent aqueous liquid
Section 2 Composition
Organic compounds less than 1 %
Water 99%
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
Product inhaled Remove from exposure
10
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: GHB media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity:
< 0
100
pH: 7.0
Does not flash
N/D
N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
11
Not applicable
Section 12 Ecological Information
Not applicable
Section 13 Disposal
disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks associated with Offshore Operations’, published by the Institute of Corrosion, 1992 Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidiary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified Risk Phrases: Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
12
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Iron Utilizing Bacteria Medium (IUBM)
Appearance: Golden yellow liquid
Section 2 Composition
Inorganic salts less than 1.0 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists
Product ingested Wash out mouth with water. Seek medical advice.
Product inhaled Remove from exposure
13
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: IUBM should be handled and used in glass containers as supplied and should
not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn. Wear gloves.
Section 9 Physical and Chemical Properties
pH: 5.7
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
14
Section 12 Ecological Information
Not applicable
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes and skin. In case of contact with eyes and skin, rinse
immediately with plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
15
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: MPB Growth Media
Appearance: Pale cream aqueous liquid with precipitate
Section 2 Composition
Yeast less than 1.0 %
Inorganic salts less than 3.0 %
Mercaptoacetic acid less than 0.02 %
Water
0
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
16
Product inhaled Remove from exposure
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: MPB media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.1 @ 20C
< 0
100
pH: 7.2
Does not flash
N/D
N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
17
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992
Section 14 Transport Information
ARD/RID
Class: Not Classified
Item:
Hazard Identification No. UN
Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO
Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No: IATA
Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
18
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
19
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Sterile Maximum Recovery Diluents (MRD)
Appearance: Clear liquid. May contain sand.
Section 2 Composition
Peptone 0.1 %
Sodium chloride 0.9 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Irrigate thoroughly with water. Seek medical advice if discomfort persists.
Product ingested Wash out mouth with water. Seek medical advice
Product inhaled Remove from exposure
20
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: MRD should be handled and used in glass containers as supplied and should not
be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions: Rubber or plastic gloves should be worn
Section 9 Physical and Chemical Properties
Specific Gravity: Not determined
Melting/Pour Point (C):
Boiling Point (C): 100
pH: 6.0
Flash Point (C): Does not flash
Decomposition Temperature (C): Not determined
Auto Ignition Temperature (C): ND
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
21
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Not applicable
Section 13 Disposal
MRD should be disposed of according to local government regulations. Inoculated diluents
should be autoclaved at 121C for 15 minutes before disposal.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
Date of Issue: 23 September 1998 Replaces:
22
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
23
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: NOB Growth Media
Appearance: Pale pink aqueous liquid with precipitate
Section 2 Composition
Yeast less than 1.0 %
Inorganic salts less than 3.0 %
Mercaptoacetic acid less than 0.02 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
24
Product inhaled Remove from exposure
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: NOB media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.1 @ 20C
Melting/Pour Point (C): < 0
Boiling Point (C): 100
pH: 8.0
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
25
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
26
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
27
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: NRB Growth Media
Appearance: Clear yellow aqueous liquid
Section 2 Composition
Dried meat extract 1%
Potassium nitrate 0.1 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause irritation
Ingestion: Harmful in large quantities
Inhalation: Not applicable
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice.
Product ingested Wash out mouth with water
Product inhaled Not applicable
28
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: NRB media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection: Not applicable
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.1 @ 20C
Melting/Pour Point (C): N/D
Boiling Point (C): N/D
pH: 7.0
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
29
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Not applicable
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
30
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
31
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Oil-Degrading Bacteria Medium (sterile)
Appearance: Clear liquid with precipitate (white to yellow)
Section 2 Composition
Inorganic salts 1 – 15%
Organic components < 0.1%
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
Product inhaled Remove from exposure
32
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: Oil Degrading Bacteria medium should be handled and used in glass containers
as supplied and should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.1 – 1.5 @ 20C
Melting/Pour Point (C): 0
Boiling Point (C): 100
pH: 7.0
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: No discernible odour
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
33
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Not applicable
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidiary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
34
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Phosphate Buffered Saline (PBS)
Appearance: Clear liquid
Section 2 Composition
Inorganic salts less than 1.0 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
Product inhaled Remove from exposure
35
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: PBS media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn. Wear gloves.
Section 9 Physical and Chemical Properties
pH: 7.0 ± 0.2
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
36
Not applicable
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
37
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Sterile Seawater Diluents
Appearance: Salt water within a test tube
Section 2 Composition
100% seawater
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: Likely to irritate
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Irrigate thoroughly with water. Seek medical advice if discomfort persists.
Product ingested Drink plenty of water. Seek advice if unwell.
Product inhaled Remove from exposure
Section 5 Fire-fighting Measures
38
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with clean water
Section 7 Handling and Storage
Materials: Seawater Diluents should be handled and used in glass containers as supplied
and should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Additional Instructions: Rubber or plastic gloves should be worn
Section 9 Physical and Chemical Properties
Specific Gravity: Not determined
Melting/Pour Point (C): -
Boiling Point (C): 100
pH: 7.6
Flash Point (C): Does not flash
Decomposition Temperature (C): Not determined
Auto Ignition Temperature (C): Not determined
Solubility: -
Odour: Virtually odourless
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
39
Not applicable
Section 12 Ecological Information
Not applicable
Section 13 Disposal
Seawater Diluents should be disposed of according to local government regulations. Inoculated
diluents should be autoclaved at 121C for 15 minutes before disposal.
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
40
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Thioglycollate (TGC) Growth Media
Appearance: Pale straw coloured aqueous liquid
Section 2 Composition
Yeast less than 1.0 %
Inorganic salts less than 3.0 %
Pancreatic Digest of Casein less than 2.0 %
Dextrose less than 1.0 %
L-Cystine less than 1.0 %
Sodium Thioglycollate less than 1.0 %
Agar less than 1.0 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
41
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
Product inhaled Remove from exposure
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: TGC media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, dark, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.1 @ 20C
Melting/Pour Point (C): < 0
Boiling Point (C): 100
pH: 7.2
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: Odourless
42
Section 10 Stability and Reactivity
Incompatibility: None known
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Not applicable
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
43
Section 16 Other Information
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
44
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: TRB Growth Media
Appearance: Pale cream aqueous liquid with precipitate
Section 2 Composition
Yeast less than 1.0 %
Inorganic salts less than 3.0 %
Mercaptoacetic acid less than 0.02 %
Water
Section 3 Main Hazard
Non Hazardous
Health Effects:
Skin: Brief or occasional contact is unlikely to have any significant effect
Eyes: May cause slight irritation
Ingestion: Practically non-toxic
Inhalation: Unlikely to occur
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin Wash skin with soap and water
Product in eyes Rinse with plenty of water for at least 10 minutes, holding the eye open. Seek
medical advice if soreness persists.
Product ingested Wash out mouth with water
45
Product inhaled Remove from exposure
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
Materials: TRB media should be handled and used in glass containers as supplied and
should not be transferred to other vessels.
Precautions Store in a dry, well-ventilated area at ambient temperature.
Section 8 Personal Protection
Protective Equipment: Eye protection should be worn
Respiratory Protection:
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.1 @ 20C
Melting/Pour Point (C): < 0
Boiling Point (C): 100
pH: 7.2
Flash Point (C): Does not flash
Decomposition Temperature (C): N/D
Auto Ignition Temperature (C): N/D
Solubility: Fully dispersed in water
Odour: Odourless
Section 10 Stability and Reactivity
Incompatibility: None known
46
Stability: Stable at normal ambient temperatures
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Not applicable
Section 12 Ecological Information
Section 13 Disposal
Used media is to be autoclaved at 121C for 15 minutes, then disposed of according to local
regulations. Further information is available from ‘Survey of Microbiological Hazards and Risks
associated with Offshore Operations’, published by the Institute of Corrosion, 1992
Section 14 Transport Information
ARD/RID Class: Not Classified
Item:
Hazard Identification No.
UN Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA Class: Not Classified
Subsidary Risks:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases:
Safety Phrases: Avoid Contact with eyes. In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Section 16 Other Information
Date of Issue: 19 October 2001 Replaces: Not Applicable
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.
47
ITS TESTING SERVICES (UK) LIMITED
(TRADING AS: INTERTEK)
Intertek, Exploration Drive, Aberdeen Science and Energy Park, Bridge of Don, Aberdeen, AB23
8HZ.
Emergency Contact No: +44 (0)1224 708 500 Fax: +44 (0)1224
Issued Date: 06 January 2014 Print Date: 23 October 2014
Section 1 Product Information
Product Identification/Trade name: Zinc Acetate
Appearance: Colourless crystals
Section 2 Composition
Zinc acetate CAS No. 5970-45-6
Section 3 Main Hazard
Non Hazardous
Health Effects:
Harmful by ingestion, causing nausea and vomiting. Continued ingestion of small amounts can
cause digestive disorders and constipation. Irritating to eyes and may irritate skin.
Section 4 First Aid/Emergency Actions
If this happens Do this
Product on skin: Wash off skin thoroughly with water. In severe cases, seek medical attention
Product in eyes: Irrigate thoroughly with water. If discomfort continues, obtain medical attention.
Product ingested: Wash out mouth with water and give plenty of water to drink. OBTAIN
MEDICAL ATTENTION
Product inhaled Remove from exposure, rest and keep warm
Section 5 Fire-fighting Measures
Fire Hazard: Non-flammable
48
Section 6 Accidental Release or Spillage Procedure
Wash affected areas with plenty of water
Section 7 Handling and Storage
No special requirements
Section 8 Personal Protection
Protective Equipment: Eye and hand protection should be worn.
Respiratory Protection: A dust respirator should be used. Use within a extraction hood
Additional Instructions:
Section 9 Physical and Chemical Properties
Specific Gravity: 1.73 @ 20C
Melting Point (C): 200 (decomposition)
Boiling Point (C): N/A
Auto Ignition Temperature (C): N/D
Solubility: Very soluble in water
Odour: Acetous odour
Section 10 Stability and Reactivity
Incompatibility: Avoid contact with oxidisers
Stability: Slowly effloresces
Hazardous decomposition products: None known
Section 11 Toxicology Properties
Toxicity data: LD50 = 794 mg/kg (rat, oral)
Exposure limits not assigned (long term 8 hour TWA)
Section 12 Ecological Information
49
Not applicable
Section 13 Disposal
Dilute greatly with water and run to drain
Section 14 Transport Information
ARD/RID
Class: Not Classified
Item:
Hazard Identification No.
UN
Class: Not Classified
UN Number:
Packing Group:
Marine Pollutant:
IMO
Classification: Not Classified
Emergency Action Code:
Substance Identification No:
EMS No: MFAG No:
IATA
Class: Not Classified
Subsidiary Risks:
Tremcard Number:
Tremcard Number:
Section 15 Regulatory Labelling Information
Classification: Not Classified
Risk Phrases: Harmful if swallowed
Irritating to eyes and skin
Safety Phrases: Avoid Contact with skin and eyes. In case of contact with eyes, rinse
immediately with plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection
Section 16 Other Information
Date of Issue: 1 June 1998 Replaces:
The technical information and suggestions for use contained herein are believed to be reliable,
but they are not to be construed as warranties and no patent liability can be assumed.