Post on 01-Mar-2016
description
7/18/2019 MasterPact Presentation
http://slidepdf.com/reader/full/masterpact-presentation 1/5
front face1 opening push-button (O)2 closing push-button (I)3 keylock for "connected",
"disconnected" or "test" position4 door interlock5 stored-energy-mechanism charging
handle6 operations counter7 "open" position keylock8 racking handle storage9 functional position indicator:
"connected", "test" and "disconnected"10 controls on fixed chassis (accessible
with cubicle door closed)11 padlocking facilities for "connected",
"disconnected" or "test" position12 stored-energy-mechanism status
indicator
c "charged"
c "discharged"
13 main-contact position indicator
c "OFF" (O);
c "ON" (I).
14 fault-trip indicator/breaker reset button
LV circuit-breaker: blue figuresEnclosure: red figures
Masterpact: presentation
Masterpact circuit breakers are used toprotect and control low-voltage distributionsystems. They may be installed in main LV
switchboards (incoming units, main andsecondary outgoers). Masterpact is acomplete range offering a large selection ofperformance levels:c ratings from 800 to 6300 A AC,from 1000 to 8000 A DC;c breaking capacity from 40 to 150 kA rms;c operational voltages 690 V AC,1000 V DC.
2 Merlin Gerin
Many versions
c 3 or 4 poles;c fixed or drawout versions;c
current-limiting version up to 2500 A;c wide range of control units offeringmultiple functions.
Circuit breakers designed for allapplications
c 1000 V AC version;c DC version;c anti-corrosion version;c source-changeover version;c merchant-marine and military versions.Masterpact circuit breakers comply with allmajor international standards and meetT2 tropicalisation criteria.
Reduced dimensions
c AC circuit breakers:v a single frame size from 800 to 3200 A,v common height and depth from 800 to6300 A;c DC circuit breakers:v common height and length from 1000 to8000 A for operational voltages of up to 500V DC,v common height and length from 1000 to4000 A for operational voltages greater than500 V DC.
push to reset
I
I1 I2 I3
90%
50%
20%
STR 58 UE
0 .63
IoIr
0.8
0.5 1
xIn
90
105%Ir
.88
.9 .9 2
.9 5
.98
1.8
.85
xIo
Imtm
3
4 5
6
8
101.5
2
xIo
. 3
.4 .3
.1
.1
.2
on I2t
off
.2
0
Ir fa ult
tr
Im fault
tm
I
fa ultIh
th
t
i
test
+ S –
– T +
T
F
Ihth
400
500 600
800
1000
12002 50
3 20
A
.3
.4 .4
.2
.1
.2
on I2t
off
.3
.1
I
off2
xIn
Ir :
Im :
th :
I
IG L I
G
L
L G
LIG
off
resetV
tr
60
12 0 2 40
48 0
15
30
at 1 ,5Ir
4
6
8 12
17
22
Ic1Ic2
.86
.9 .9 3
.9 5
.98
1.8
.8 5
.7
.8 .8 5
.95
.5.6
xIr
.9
1
R
xIr
test
O
push OFF
connected
test
disconnected
O OFFdischarged
I
push ON
MERLIN GERIN
M32 H1masterpact
IEC 947-2
00000
Ui
Ue
Icu
Ics
Icw
1000V
380 /440V
100kA
100kA
75kA 1s
50 /60Hz
480 /690V
85kA
85kA
M63 M50 M40 M08 à M32
charged
discharged
O OFF
I ON
E 2 8 7 9 1
E 2 8 7 6 1
E 2 8 7 6 0
M08 to M32
0 3 5
9 2 8 P C
11
14
7
2
5
1
6
12
13
4
39 108
7/18/2019 MasterPact Presentation
http://slidepdf.com/reader/full/masterpact-presentation 2/53Merlin Gerin
drawout version1 arc chute cover2 auxiliary terminal shield3 auxiliaries connection block4 fixed chassis5 safety shutters6 arc chute7 remote control voltage release8 motor for electrical charging of
stored energy mechanism9 control unit (AC system)
10 front cover
1
2
3
6
7
8
10
9
5
4
0 1 5 1 5 9
7/18/2019 MasterPact Presentation
http://slidepdf.com/reader/full/masterpact-presentation 3/5Merlin Gerin4
Automatic source-changeover controller
Fixed circuit breaker
50%
20%
STR 58 U
0.63Io
Ir tr
0.8
0.5 1
xIn
90
105
τtr
%Ir
.88
.9 .92.95
.981.8
.85
xIo
60120 240
48015
30
at 1.5Ir
Im tm
3
4 5
6
8
101.5
2
xIr
.3
.4 .3
.1
.1
.2
on I2t off
.2
0
Ir fault
tr
Im fault
tm
I
faultIh
th
i
test
+ –
– +
T
R
test
Ih 1200A Max th
400500 600
800
1000
1200250
320
A
.3
.4 .4
.2
.1
.2
on I2t off
.3
.1
I
8
12 14
19
22
Max.2
4
xIn
Ic1 Ic2
.86
.9 .93
.95
.98
1.8
.85
xIr
.7
.8 .85
.95
.5.6
.9
1
xIr
Ir :
Im :
th :
min.
norm
overcurrent
ground
isolation renforcéeclasse II
séparation totaleentre chaque phase
déclencheurs voltmétriquesaccessibles à l'avant
Masterpact: presentation
safety and reliabilityc reduced, simple maintenance (maincontacts easily accessible, with wear
indication feature);c double insulation from the front face;c positive contact indication;c auxiliary devices can be fitted on sitewithout adjustment;c fewer parts than conventional ranges (by afactor of 5-10);c a trip interlock ensures that the circuitbreaker is open during connection anddisconnection;c connection to top or bottom terminals;c fully tropicalised as standard.
stored energy operatingmechanismMasterpact circuit breakers are operated viaa stored energy mechanism forinstantaneous opening and closing.The mechanism is charged either manuallyor electrically. Closing and openingoperations can be initiated either from thelocal pushbuttons on the circuit breaker frontface, or by remote control.
common auxiliariesfrom 800 A to 6300 AAuxiliariesc accessible from the front, mounted in aseparate compartment insulated from power
circuits;c secured by a single screw;c adjustment-free;c can be fitted on site.
ccccc Source changeover system
Four solutions are available:v mechanical interlocking for 2 or 3 circuitbreakers, adaptable to various source-changeover configurations;v automatic source-changeover controller,easy to implement on any two suitablyequipped circuit breakers (electricallycharged operating mechanism, etc.) (for 3circuit breakers, consult us);
v complete assembly including 2 or3 mechanically (rod assembly) interlockedcircuit breakers, adaptable to varioussource-changeover configurations;v complete assembly including2 mechanically (rod assembly) interlockedcircuit breakers and an automatic source-changeover controller, adaptable to varioussource-changeover configurations. Readyfor connection.
other possibilities ccccc Fixed circuit breaker
The fixed circuit breaker is derived from themoving part of the drawout circuit breaker byadding a fixing bracket on each side.
ccccc Switch version
The switch (unprotected) version is deriveddirectly from the standard circuit breaker, butdoes not implement a control unit (or themagnetic trip units used with the DC circuitbreakers). Available models are:
v standard: type HI and NI;v high performance: type HF, equipped witha protection system that instantaneouslyopens the circuit breaker in the event ofclosure under fault conditions.
ccccc Earthing switchA special short-circuit and earthing switch isavailable on request for the M08 to M32Hdrawout types, 3 or 4 poles. Please consultus.
ccccc 1000 V AC circuit breakers
E 2 9 4 9 0
voltage releasesaccessible from thefront
total phaseseparation
double insulation
0 3 5 9 2 9
0 5 3 0 6 1
0 5 3 0 6 0
0 5 3 0 5 8
7/18/2019 MasterPact Presentation
http://slidepdf.com/reader/full/masterpact-presentation 4/5Merlin Gerin 5
Drawout Masterpact DC circuit breaker
Fixed Masterpact DC circuit breaker
device identificationM 20 H1
breaking capacity;
c N1: standard;c H1: H2: high performance;c L1: current limiting;c DC: direct current.
ratingc rated current / 100.
familyc Masterpact: LV power aircircuit breaker.
DC circuit breakersMasterpact DC circuit breakers are availablein fixed and drawout versions. They benefit
from the AC range technology andadvantages.c 5 available ratings from 1000 to 8000 A;c 2 breaking capacities, 100 kA at 500 V,50 kA at 750 and 1000 V;c a circuit-breaker version offeringinstantaneous short-circuit protection withan adjustable, magnetic trip unit (DINA);c a switch (unprotected) version.note: up to 125 V DC, the devices in the ACrange (M08 to M63) may be used only in theswitch version, in which case a three-pole,type HI device should be used, with:c 1 pole for the positive polarity;c 1 pole for the negative polarity;
c 1 pole not used.
Auxiliaries
All the auxiliaries designed for theMasterpact AC circuit breakers may be used
on the DC versions, with the exception of theposition switches, indicating the connected(CE), disconnected (CD) and test (CT)positions.Auxiliary connections are made via one ortwo manually disconnectable plugs thatremain accessible from the front.
AccessoriesStandard Masterpact DC range equipmentincludes an arc-chute cover (CC) and, ondrawout versions, safety shutters (VO).Interphase barriers (EIP) are not availablefor the DC range.
8 6 0 9 4
8 6 0 9 6
7/18/2019 MasterPact Presentation
http://slidepdf.com/reader/full/masterpact-presentation 5/5Merlin Gerin6
Masterpact: presentation
Masterpact circuit breakers are the productof Merlin Gerin’s vast experience in the fieldof power circuit breakers. They incorporate
all the qualities of traditional air circuitbreakers while drawing on certain of theadvantages specific to moulded-case circuitbreakers. In particular, they require nopreventive maintenance.
ease of installationMasterpact is a complete and rationallydesigned range.c 10 ratings;c 4 breaking-capacity levels;c 6 control units;c a complete range of auxiliaries andaccessories;c numerous versions (three and four-pole
devices, fixed and drawout versions, etc.).Masterpact circuit breakers are easy toincorporate in switchboards.
c a single frame size from 800 to 3200 A,thus making for standardised columns;c an upper safety clearance equal to zerodue to the arc-chute cover, on both the fixedand drawout versions;c built-in measurement functions in thecontrol units;c auxiliaries are the same for the entirerange and may be easily implemented (onlya screwdriver is required).
Masterpact circuit breakers are easy toconnect to the main distribution system.
c all types of connections are available(horizontal and vertical terminals, front andmixed connections);c connections are possible with bars of anythickness;c connection to the input power source ispossible on the upper or lower terminals ofthe circuit breakers.
Due to their small size, Masterpact circuitbreakers can replace most existingcircuit breakers.
continuity of serviceMasterpact circuit breakers are designedwith continuity of service in mind. The
result is:c total time discrimination on the N1 and H1circuit breakers and maximum discriminationon H2 circuit breakers;c factory pre-setting of Masterpact circuitbreakers which never require any periodicmaintenance;c high electrical endurance: 10 000 cycles at1600 A and 30 cycles at 50 kA, withoutmaintenance;c preventive indications: load-sheddingindication switch, long-time thresholdoverrun alarm, etc.;c easy access to the main contacts fittedwith mechanical wear indicators. An optional
function on the STR68 control unit is theremote indication of contact wear, thusmaking possible continuous monitoring ofcircuit breakers during their service life.
operating safetyThe insulating casing of Masterpactcircuit breakers provides for:c user safety:v double insulation on the front face(class II),v auxiliary circuits in a compartmentinsulated from the power circuits;c switchboard safety when the circuitbreaker is in the open position:
v each pole is effectively isolated in its ownhousing,v limitation of external disturbances.Positive contact indicationThe position indicator cannot indicate«open» unless the poles are effectivelyseparated by the required distance.The circuit breakers automatically openduring racking in and out.
reliabilityc Masterpact circuit breakers comprise tentimes fewer parts than traditional devices.They are easier to produce and more
reliable.c the Masterpact circuit-breaker factory iscertified ISO 9002;c the design of Masterpact circuit breakersis modular with delayed differentiation(highest possible number of common partson all models). The result is shorter deliverytimes and enhanced reliability.
,
0 3 6 6 3 4
0 2 5 1 7 9
2500 A Masterpact circuit breaker
Top: horizontal terminals
Bottom: vertical terminals