Post on 10-Dec-2021
LIST OF THE COMPONENT PARTSOF THE MAB AUTOMATIC PISTOL
M o d e l F
MANUFACTURE D'ARMESAUTOMATIQUESAllees-Marines BAYONNE (B.-P.)
Tel. 517.53
1 Barrel
2 Slide
3 Action frame
1 Magazine Spring
5 Hammer spring with gui-de
Recoil spring
26 Breech block pin
27 Barrel fixing pin
28 Rearsight
29 Extractor spring
30 Ejector
31 Magazine catch
32 Sear axis pin
* Magazine
il Hammer
10 Kecui l spring guide
11 Hammer hull
12 Magazine spring guide
13 Firing piii
1 \ liighl handle plate
1'i Lef t handle plate
Hi lireech block
17 Magazine stop
18 Sear
111 Trigger bar
20 Magazine platform
21 Dismantling stud
22 Safety
23 Trigger retainer
24 Foresight
25 Magazine safety & spin
Holt and spring holt offacultative safety
,'!.') Magazine slop spring
36 Extractor
37 Handle plate screw
38 Magazine stop axis
39 Extractor driver
40 Boll and spring bolt ofthe dismantling stud
•il Sear spring
42 Handle plate screw
43 Hammer axis pin
44 Bolt and spring bolt forthe trigger retainer
V.'i Firing pin spring
46 Firing pin spring retai-ner
17 Obturator of the faculta-tive safety spring.
7, 2, /
Explanation noticeFor the :WorkingDismantlingReassemblingList of spare parts of the
AUTOMATIC PISTOL
MABM o d e l F
MABAUTOMATIC PISTOL
M o d e l F
Total length of the pistol 11.28 in.Barrel length 4.20 -in. or 6.12 in. or fi.f)2 in.Weight 27.80 oz. or 30 oz. or 3.1 oz.
This pistol is provided with stud to permit single shotfiring. II is then necessary to pull back the slide for eachshot. With the stud in its normal position, the pistolfires automatically.
DISMANTLING
Place a point in thehole in the disman-tling stud, press andraise the stud.
WORKING
1° SAFETIES
The p i s lo l has 2 safeties :- one is the o r d i n a r y side safety,- the other is automatic.
The automatic safely locks the mechanism when themagazine is removed from the pistol.
2° MAGAZINE
The capacity of the magazine is of 9 cartridges.When loading the magazine, care should he taken to
see that the cartridges are correctly placed, so lhat therim of each cartridge is in front of the rim of the cartridgeunderneath.
Place the magazine in the pistol.Draw the slide hackwarrts and allow it to jump
forward quickly.Notice if the slide is completely forward.
3" UNLOADING
a) Remove the magazine liy pressing on the magazinecatch at the base of the grip.
b) Draw the slide sharply lo the rear so as toremove the cartridge which may he in the chamber.
IMPORTANT
Well oil the inside of the chamber before shooting.Glean the chamber after every 2 magazines with an oilymop. Clean the barrel and the slide after use.
REASSEMBLING
I" Replace the recoilspring, the pointedend of the gu idetowards the breech
2° Hold the pistol in the left hand,draw the slide backwards to itsfull extent.
2° Replace the slide taking care thatthe end of the recoil spring fits in itcorrectly. Draw the slide back-wards and lower it to its originalhorizontal position and allow it toslide forward.
3° Now raise the slideand allow it to moveforward and becomedisengaged.
3° Press down the dis-mantling stud.
Publ. Marcel Lori*. Bayonne