Post on 11-Mar-2020
Magnetic Particle Testing (MPT) & Liquid Penetrant Testing (LPT) Products & Accessories
ISO 9001: 2015 Certied Company
Battery Operated Yoke
We offer full range of magnetic yokes like permanent magnets, AC/DC, Battery Operated etc. All these yokes are
designed to meet the highest standards (ASTM E1444) & operating conditions in the eld. All these yokes are portable,
light-weight & water resistant.
Salient Features of Yoke• DC led Intensity potentiometer• Articulated legs with span of 300mm
• Input single phase 110-250 VAC 50/60 Hz• Can be used for AC demagnetization
• No risk of sparking or “hot spots” on the job
AC Electromagnetic Yoke
Technical Specications
Weight
Leg Span
Lifting Capacity
Cord Length
Duty Cycle
Electrical Requirements
: 2.1 kg
: 4.5 Kg
: 0–11 in / 0–28 cm
: 10 ft. / 3 m
: 50%, max on time is 90 sec
: 230V – 50/60 Hz: 2.6 A 110V – 60 Hz: 1.2 A
AC/DC Electromagnetic Yoke
Technical Specications
Lifting Capacity
Leg Span
Cord Length
Duty Cycle
Electrical Requirements
Weight
DC mode : 18.1 Kg: AC mode : 4.5 Kg
2.2 Amps: 220V, 50Hz, 1 Phase
: 3.5 kg
: 0–11 in / 0–30 cm
: 10 ft. / 3 m
: 23% (3sec On followed by 10sec Off)
Technical Specications
Leg Span
Full Force
Duty Cycle
Yoke /Battery weight
Electrical Requirements
: 2 min “ON” and 4 min “OFF” at max output
: 12V DC, 2.0A at max load
100mm pole spacing
in DC, 2.2 Amps in AC
: Approx. 27 Kg max at
: 4 kg / 2.5 kg
: 0–11 in / 0–30 cm
Permanent Magnetic Yoke
Technical Specications
Poles Adjustment
Full Force
Weight
150mm pole spacing.
: 0 – 200 mm
: Approx. 19 Kgs max. at
: 2.2 Kgs
Electromagnetic Yokes
Power Packs
MPI Bench Machine
• Input single phase 220 VAC 50 Hz
Salient Features of APP Series Mobile Power Packs:
• Output: AC or Half Wave DC
• Inbuilt demagnetization function
• Find surface defects with AC current; switch
cable connection to half wave DC (HWDC) for
near-surface aws
• Locate defects in any direction using prods,
central conductor, coil (wrap part with 3-5 turns
of cable).
• Available in 1000, 1500, 2000, 3000, 4000 & 5000
& 6000 Amps
• Complied with ASTM standards
• Duty Cycle: 2-min ON/ 2-min OFF (50%)
• Thyristorised step less power control
• Output: AC or Half Wave DC
• Pneumatically operated head & manual operated
tail stock
• Complied with ASTM standards
• Main unit powder coated, SS tank & grill
• Available in 2000, 3000, 4000, 5000 & 6000 Amps
• Input three phase 440 VAC 50 Hz
• Versatile and durable for industrial environments
• Hood frame and black cloth with exhaust fan
Salient Features of ABM Series MPI Benches:
• LED Flood Lamps (optional)
We offer full range of mobile power packs or commonly known as prod type machine which are ideal for inspecting
large or heavy parts, in-service equipments or job-site weld testing with magnetic particle inspection.
The APP Series of mobile power packs are convenient and economical inspection units to meet a variety of magnetic
particle inspection needs. These units feature AC or Half Wave DC output.
The ABM Series of MPI Benches can be sized for specic test parts and to accommodate almost any size part. These benches are suitable for detecting surface as well as subsurface cracks in Longitudinal/ Horizontal direction.
We offer full range of magnetic particle inspection (MPI) benches which are designed for fast and reliable inspection needs.
AUL-150AUT-70 AUL-150B
Technical Specications
90-270VAC/ battery
operated
4 UV-A LED
AUL-150
≥8,000
≤ 10
≥ Ø200 mm
3 - 4 Hours
Anodized Aluminium
2 Hours
220 x Ø110 (LxD)
(1Kg)2.2lb
NA
AC Mains 90V - 270V, 50-60 Hz
≤ 10
≥ 300 mm x 200 mm
Continuous
10 UV-A LED
(3Kg)
AUF-350
300 x 150 x 65 (LxWxD)
Anodized Aluminium
6.61lb
≥6,000
Charge Time
Beam Coverage Area
Power Requirement
UV-A 365 Intensity at a distance of 15"(µw/cm²)
White Light Emission [Lux (0.92 fc)]
Light Source
Run Time
Housing Material
Housing
Weight
Dimensions (mm)
AUT-70
1 UV-A LED
≥2,000
≤10
≥ Ø80 mm
Battery operated
2 - 3 Hours
1 Hour
Anodized Aluminium
132mm x Ø32mm
(0.13Kg)0.28lb
AUL-100
1 UV-A LED
≤10
≥3,000
≥ Ø100 mm
Anodized Aluminium
battery operated
90-270VAC/
2 - 3 Hours
1 Hour
1.76lb(0.8Kg)
220 x Ø110 (LxD)
AUL-100D
≥ Ø150 mm
2 Hours
≥4,500
2 UV-A & 1 White LED
≤10
90-270VAC/ battery
operated
4 - 5 Hours
Anodized Aluminium
220 x Ø110 (LxD)
1.76lb(0.8Kg)
AUL-150D
≥8,000
≥ Ø200 mm
90-270VAC/ battery
operated
Anodized Aluminium
220 x Ø110 (LxD)
2.2lb(1Kg)
4 UV-A LED & 1 White LED
≤ 10
3 - 4 Hours
2 Hours
(0.43Kg)
AC Mains 100V - 264V,
50-60 Hz
Continuous
≤ 10
ABS Plastic
3 UV-A LED
≥6,000
AUB-150
≥ Ø150 mm
140 x Ø120 (LxD)
NA
0.94lb
Technical Specications
Salient Features
• Rechargeable Li-Po Battery
• Wavelength(peak): 365 nm ±5 nm
• As per ASTM E 3022-18
• Ergonomically Designed Robust Housing
• Mechanical Cooling System
• Constant Intensity
AUF-350
AUL-100D AUL-150AUT-70 AUB-150
LED UV Lamps
FlawGloRange of MPI Chemicals
Technical Data:
FlawGlo WV 20
ARDP-07/ABDP-01/ AGDP-08
FlawGlo WF 10
Model
FlawGlo CF 01
FlawGlo OF 01
FlawGlo OV 08
WCP - 04
BMI - 03
FMI - 06
(Aerosol Can)
Water Visible Powder
Black Magnetic Ink
Fluorescent Magnetic Ink (Aerosol Can)
White Contrast Paint
Oil Fluorescent Powder
Oil Visible Powder
(Aerosol Can)
ConcentrateFluorescent Liquid
Description
Water Fluorescent Powder
Red/Black/Grey Dry Powder
Dilution
10gm/litre
N A
1%
1gm/litre
20gm/litre
N A
N A
8gm/litre
N A
Approval & Specications:
NF EN ISO 9934-2, ASME BPVC, Section V,ASTM SE-709, ASTM E1444 - Section 5.8
NF EN ISO 9934-2, ASME BPVC, Section V,
NF EN ISO 9934-2, ASME BPVC, Section V,ASTM SE-709, ASTM E1444 - Section 5.8
ASTM E-1444, ASME BPVC, Sec V, AMS 2641, AMS 3041, EN ISO 9934-2
AMS 3044 Code RCC-M Tome III
ASTM SE-709, ASTM E1444, AMS 3040
NF EN ISO 9934-2, ASME BPVC, Section V,
AMS 3042
ASTM E-1444, ASME BPVC, Sec V, AMS 2641, AMS 3041, EN ISO 9934-2
NF EN ISO 9934-2, ASME BPVC, Section V,
ASTM SE-709, ASTM E1444 - Section 5.8
ASTM SE-709, ASTM E1444 - Section 5.8
NF EN ISO 9934-2, ASME BPVC, Section V,
ASTM SE-709, ASTM E1444 - Section 5.8
AMS 3041
ASTM E-1444, ASME BPVC, Sec V, AMS 2641, AMS 3041, EN ISO 9934-2
50 Ltrs.
420 ml
1/5/20/
1/5/20/50 Kgs
420 ml
1/5/20 Kgs
50 Kgs
420 ml
StandardPacking
1/5/20/50 Kgs
50/200 Kgs1/5/20/
1/5/20/
0• Temperature range 0 to 50 C
• Highly Sensitive Fluorescent as well as Visual• Low in Sulphur & Halogens• Superior Flaw Resolution
Salient Features
• Oil as well as Water Suspendable
• Wet particles: In the form of Powder & Liquid Concentrate
Magnetic Particle Testing Accessories
Ketos Ring Pie Gauge Gauss Meter - Analogue
Gauss Meter - Digital Centrifugal Tube with Stand Rubber Blower
Burmah Castrol Strips White/UV Light Meter MTU Test Block
Lifting Blocks Copper Braided PadsQuantitative Quality Indicators
FlawGloRange of LPT Chemicals
Technical Data:
WP - 125
Model
SP - 125
SD - 175
SC - 190
WFP - 578
SFP - 578
Description
Solvent Cleaner(Aerosol Can)
Solvent Penetrant
Solvent Suspendable
(Aerosol Can)
Developer (Aerosol Can)
Solvent Fluorescent
(Aerosol Can)
Penetrant (Aerosol Can)Water Washable Fluorescent
Penetrant (Aerosol Can)
Water Washable Penetrant
Sec V, IS-3658, AMS 2644, EN ISO 3452-2
Sec V, IS-3658, AMS 2644, EN ISO 3452-2
Sec V, IS-3658, AMS 2644, EN ISO 3452-2
Approval & Specications:
ASTM E-165, ASTM E-1417, ASME BPVC, Sec V, IS-3658, AMS 2644, EN ISO 3452-2
ASTM E-165, ASTM E-1417, ASME BPVC,
ASTM E-165, ASTM E-1417, ASME BPVC,
ASTM E-165, ASTM E-1417, ASME BPVC, Sec V, IS-3658, AMS 2644, EN ISO 3452-2
ASTM E-165, ASTM E-1417, ASME BPVC,
ASTM E-165, ASTM E-1417, ASME BPVC, Sec V, IS-3658, AMS 2644, EN ISO 3452-2
420 ml
420 ml
StandardPacking
420 ml
420 ml
420 ml
420 ml
• Excellent Reliability• Temperature range 10 to
050 C
Salient Features• Vivid, high contrast colour• Low in Sulphur & Halogens
• Water washable & Solvent type penetrant
• Superior Flaw Resolution
Aluminium Comparator BlockTAM/KDS Twin Test Panel Ni-Cr Test Block Reference Block Type 2
Liquid Penetrent Testing Accessories
About UsKeeping the vision of “Make in India”, M/s Arora Technologies (P) Limited (ATPL) is focussing on Manufacturing and
Distribution of NDT Products & Accessories.
We are committed to build long-term relationship with our customers by offering reliable products & accessories. We
pursue our business through innovation, latest technology & unrelenting quest for excellence.
Arora Technologies (P) Limited
619 & 620 The Great Eastern Galleria, Plot No. 20, Sector 4, Nerul, Navi Mumbai 400 706, Maharashtra, India
T: +91-22 6138 0600, 2770 3913, 2770 3923 | F: +91-22 2770 3903 | E: info@arorandt.com | W: www.arorandt.com
Spe
ci
ca
tio
ns
are
su
bje
cte
d t
o c
ha
ng
e w
ith
ou
t n
otic
e
ATP
L B
roc
hu
re M
PT/
LPT
20
19
/04
Re
v.
00
ISO 9001: 2015 Certied Company