Post on 26-Jul-2020
26
Machine Mounted Metal Separator (MMS)
Machine Mounted All Metal Separator (MMS)for High Temperatures
Reliable detection of all metals, free or encapsulated:• Ferrous • Copper• Stainless Steel • Brass• Aluminum
Ruggedly built, space-saving Bunting Machine-Mount-ed All-Metal Separators remove even fine metal contaminants from resins and regrind at the throatof the machine .
Technical DataOperating Voltage 120 V AC, 50 or 60 HZ (240 V available on request)Fused 315 MA (slow blow) 5 x 20 MM according to DIN Type of Protection IP 54Temperature Range 14° F to + 122° F (working temperature)Material Temperature Up to 176 ° F - Standard Unit Up to 350 ° F - High Temperature UnitRelative Humidity Up to 100 % (without condensation)Conveying Speed Slow flowing materialReject Duration 0 .1 to 16 secondsAir Supply 200 CFM minimumOperating Pressure 80 psi - 100 psiWeight MMS unit - 50 lbs Flange Kit - 8 lbsPower Cable App . 6 foot cable with plug (2 pole and grounding Pin) US version with US standard plug
Application• Plastics Industry (Pellets/Regrind)
Machinery Protection • Extruder, Injection and Blow Molding Machines• Material flow: slow moving material in column• Minimum Conveying Speed - 12mm / sec . (molding machines only)• Maximum top load capacity approximately 2,000 lbs . • Mount: throat of machine
Designed especially for choke-feed applications where the product is at a higher than normal temperature . It bolts directly to the in-feed of processing equipment and supports the weight of hoppers and other auxiliary equipment . A fast pneumatic rejection mechanism aided by precise timing results in accurate cycling and conservation of good material
• Handles temperatures up to 350° degrees• Detached controls for remote mounting
27
Machine Mounted Metal Separator (MMS)
Top Flange Mounting Kit 2” MDMMTF05000013” MDMMTF0750001
10’ Reject Hose and Clamp Kit MDMMHK01
Bunting® MMS availablewith optional Self-Monitoring
High-Volume Inlet Air FilterMDMMAF01
Bottom Flange Mounting Kit2” MDMMBF05000013” MDMMBF0750001
Standard Discharge Riser Kit (available blank or drilled) MDMMRK0001
Remote Reset Pushbutton with 10’ Cable MDMMRR01
Equipment Part Numbers
Base Unit:
Part Number DescriptionMDMM30050001 2” (50mm) Machine Mount SeparatorMDMM30050002 2” (50mm) Machine Mount Separator w/self-monitoringMDMM30075001 3” (75mm) Machine Mount SeparatorMDMM30075002 3” (75mm) Machine Mount Separator w/self-monitoring
Accessories: listed separately on sales order
Part Number DescriptionMDMMTF0500001 2” top flange mounting kit-blankMDMMTF050_ _ _ _ 2” top flange mounting kit-drilledMDMMBF0500001 2” bottom flange mounting kit-blankMDMMBF050_ _ _ _ 2” bottom flange mounting kit-drilledMDMMTF0750001 3” top flange mounting kit-blankMDMMTF075_ _ _ _ 3” top flange mounting kit-drilledMDMMBF0750001 3” bottom flange mounting kit-blankMDMMBF075_ _ _ _ 3” bottom flange mounting kit-drilledMDMMAF01 high volume inlet air filterMDMMRR01 remote reset push- button with 10’ cableMDMMHK01 10’ reject hose and clamp kitMDMMRK0001 std discharge riser kit-blank (8” sq x 4” high)MDMMRK_ _ _ _ std discharge riser kit-drilledTest Sticks Available
Top Flange Mounting Kit2" MDMMTF05000013" MDMMTF0750001
10' Reject Hose and Clamp KitMDMMHK01
Bunting MMS availablewith optional Self-Monitoring
High-VolumeInlet Air FilterMDMMAF01
Bottom FlangeMounting Kit2" MDMMBF05000013" MDMMBF0750001
Standard DischargeRiser Kit (availableblank or drilled)MDMMRK0001
Equipment Part Numbers
Base Unit:
Part Number DescriptionMDMM30050001 2" (50mm) Machine
Mount SeparatorMDMM30050002 2" (50mm) Machine
Mount Separatorw/self-monitoring
MDMM30075001 3" (75mm) MachineMount Separator
MDMM30075002 3" (75mm) MachineMount Separatorw/self-monitoring
Accessories: listed separatelyon sales order
Part Number DescriptionMDMMTF0500001 2" top flange
mounting kit-blankMDMMTF050 _ _ _ _ 2" top flange
mounting kit-drilledMDMMBF0500001 2" bottom flange
mounting kit-blankMDMMBF050 _ _ _ _ 2" bottom fl ange
mounting kit-drilledMDMMTF0750001 3" top flange
mounting kit-blankMDMMTF075 _ _ _ _ 3" top flange
mounting kit-drilledMDMMBF0750001 3" bottom flange
mounting kit-blankMDMMBF075 _ _ _ _ 3" bottom fl ange
mounting kit-drilledMDMMAF01 high volume inlet
air filterMDMMRR01 remote reset push-
button with 10' cableMDMMHK01 10' reject hose
and clamp kitMDMMRK0001 std discharge riser
kit-blank(8" sq x 4" high)
MDMMRK _ _ _ _ std discharge riserkit-drilled
Test Sticks Available
Remote ResetPushbutton with10' CableMDMMRR01
Test Ball Sensitivity Chart - MMS Choke FeedCoil Frequency @ 250 kHz Factory Setting (2)Model No. FE Non-FE SSMMS 2"standard 0.7 1.0 1.5MMS 3" standard 0.8 1.2 1.5MMS 2" high-temp 1.5 1.8 1.8MMS 3" high-temp 2.0 3.0 3.0