Post on 18-Jan-2015
description
Fully synthetic oil formulated for all modern air-cooled two-stroke engines running in racing environment or under extreme conditions.
API TC and TSC 3 | ISO L - EGD | JASO FD
Detergent and antiwear additives
Pistons protected against wear, spark-plug
fouling and clogging reduced.
Excellent lubricating power
No ring sticking and full safety under
extreme use conditions.
Synthetic bases
Exhaust emission reduced.
«New generation» additives
Few deposits even when diluted with lead-
free petrol
Technical data
Colour : green
Viscosity at 40°C (cSt) : 77
Viscosity at 100°C (cSt) : 10.8
Viscosity index : 128
Flashpoint (°C) : 120
Density at 20°C : 0.882
The given data are typical data.
MOTORACE 2T
12503.PDF24/02/2010
Fully synthetic2 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L
BOOST’R 2T is a partly synthetic engine oil for aircooled two-stroke engines of motorcycles, mopeds and lawnmowers , with separate lubrication or self-mixing system, operating in severe conditions. It is not recommended for outboard engines.
API TC | JASO FD | ISO - L - EGD
Synthetic bases specially studied
Exhaust fumes reduced.
Excellent properties
Problems of tightening of the cylinder - piston
and malfunction in the sparks plug avoided.
Good lubricating power
Full safety under extreme use conditions.
«New generation» additives
Can be used with lead-free petrol.
2 liters can with measuring cap
Technical data
Colour : green
Viscosity at 40°C : 71
Viscosity at 100°C (cSt) : 10.2
Viscosity index : 126
Flashpoint (°C) : 120
Density at 20°C : 0.867
The given data are typical data.
BOOST’R 2T
12507.PDF24/02/2010
Semi-synthetic2 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 30L | 60L
2 TEMPS BIOMER is a fully synthetic oil for water-cooled two-stroke engines which meets the TCW3 standard.
It meets the requirements of most outboard manufacturers.
NMMA TCW3
«New generation» additives
Better dispersivity
More lubricating power
Use with lead-free petrol possible.
Biodegradable
Environmental protection.
Technical data
Viscosity at 40°C (cSt) : 47
Viscosity at 100°C (cSt) : 8.3
Viscosity index : 153
Flashpoint (°C) : 250
Density at 20°C : 0.937
Biodegradability rate : 82 % (after 21 days
CEC L 33T82)
The given data are typical data.
2 TEMPS BIOMER
12509.PDF25/02/2010
Fully synthetic2 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 25L
SUPER 2 TEMPS is a premixed mineral lubricant developed for modern aircooled two-stroke engines and watercooled engines that do not require the BIA standard. It is particularly suitable for the lubrication of quick engines such as : small chain saws, motorbikes and motorcycles, mechanized farming equipment, lawn mowers. It is not recommended for outboard engines.
It is developed for two-stroke motorbikes with separate lubrication or self-mixing systems.
API TC (TSC 3) | SAE 20
High performance additives
Formation of calamine prevented
Reduction of varnishing and deposits
Spark plugs cleaned.
The instruction of the engine manufacturer
should be observed for blend with petrol
2 liters can with measuring cap
Technical data
Colour : green
Viscosity at 40°C (cSt) : 69
Viscosity at 100°c (cSt) : 9.2
Viscosity index : 108
Flashpoint (°C) : 120
Density at 20°C : 0.880
The given data are typical data.
SUPER 2 TEMPS
12512.PDF25/02/2010
Mineral2 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L
2 TEMPS MARINE BIA meets the TCW III standard by the NATIONAL MARINE MANUFACTURERS ASSOCIATION for water-cooled outboard engines. It can be used for air-cooled two-stroke engines only if specified by the manufacturer.
It is suitable for engine with separate lubrication or self-mixing system.
NMMA TCW III
Ashless lubricant
Deposits formation prevented especially
in the combustion chambers and exit slots
as well as coking of the spark plugs and
pistons.
High oxidation stability and excellent
corrosion protection
Use in engine operating in sea water
possible.
Technical data
Colour : blue
Viscosity at 40°C (cSt) : 38
Viscosity at 100°C (cSt) : 6.5
Prediluted viscosity index : 124
Flashpoint (°C) : 118
Density at 20°C : 0.876
Ashless
The given data are typical data.
2 TEMPS MARINE BIA
12513.PDF25/02/2010
Mineral2 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 20L
This oil is made with new paraffin bases. Some additives are added to avoid the oil to be fixed at low temperature.
SAE 10W | MIL.L. 2104 A | DEF. 2101 D
Use for bearings and hydraulic circuit
which do not require a specific antiwear
protection
Use for the first filling of small 4 stroke
mono-cylinder engines or small piston
compressors possible
Protection of engines during the storage
Technical data
Viscosity at 40°C (cSt) : 41
Viscosity at 100°C (cSt) : 6.3
Prediluted viscosity index : 101
Flashpoint (°C) : 210
Density at 20°C : 0.872
The given data are typical data.
SAE 10W
12514.PDF25/02/2010
Mineralmovement oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
30L | 60L
SAE 30 is a monograde oil formulated with new paraffin bases for the lubrication of atmospheric 4-stroke petrol or diesel engines of small equipment operating under normal conditions (e.g. lawnmowers).
API SE/CC | CCMC G1/D1 | MIL.L. 2104 B
Antioxidation, antiwear, detergent additives
and pour point improver
Lubrication of normal loaded gears, for
the first filling of small 4 stroke engines
or small piston compressors
Protection of engines during the storage
possible
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 11.3
Viscosity index : 98
Density at 20°C : 0.885
The given data are typical data.
SAE 30
12516.PDF25/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
Monograde oil suitable for petrol or diesel engines, including turbo-charged, for passenger cars, lorries and civil engineering equipment.
API SF/CD | MIL.L. 2104 DPerformance level : DB 226.1 - 227.0
Grade particularly suitable for hot
climatic conditions
Antiwear, detergent, dispersant additives,
rust and oxidation inhibitors
Engine better cleaned and longer engine
life.
Technical data
Viscosity at 40°C (cSt) : 160
Viscosity at 100°C (cSt) : 15.3
Viscosity index : 100
Density at 20°C : 0.892
The given data are typical data.
SAE 40
12517.PDF25/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
2L | 5L | 30L | 60L | 200L
High quality oil formulated for petrol and diesel engines of passenger cars and trucks.Its viscosity at high temperature guarantees an excellent lubrication for engines with turbo operating in severe conditions and in urban area as well as on motorway.
It is compatible with catalytic converters.
API SL / CF / CG4 | ACEA A3 / B3 / E2Performance level : VW 505.00 / 501.01 | MB 229.1 / 228.1
Additives with low ash level
Good detergent and dispersant properties.
Protection against varnishing and
gumming at high temperature, deposits
and sludge formation, oil shear due to
speeds of rotation, wear of triggers and
nose of cams
Technical data
Viscosity at 40°C (cSt) : 178
Viscosity at 100°C (cSt) : 19.4
Viscosity index : 120
Density at 20°C : 0.888
Viscosity at -15°C (cP) : 9000
The given data are typical data.
XT5 TURBO 20W50
12520.PDF24/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 5L | 220L
High Performance oil formulated for transport applications in diesel engines, including turbo-charged.
It is recommended for modern fleet driving in motorway, urban area or operating on site. It is well suitable for turbo-charged diesel engines (vehicles manufactured after 1983) operating at low speed and heavy loaded.
API CI4 / SL | ACEA E7 / B4Performance level : MB 228.3 | VOLVO VDS 3 | RENAULT RLD 2
MAN 3275 | CUMMINS CES 20078CATERPILLAR ECF/2 | MACK E0/M PLUS
Grade particularly suitable for hot
climatic conditions
High Total Base Number
Extended drain intervals.
Antiwear and detergent properties
Polish protection
Sludge avoided.
Excellent viscosity-temperature behaviour
Complete safety.
Technical data
Viscosity at 40°C (cSt) : 164
Viscosity at 100°C (cSt) : 18.5
Viscosity at -15°C (cP) : 9000
Viscosity index : 125
Density at 20°C : 0.888
The given data are typical data.
ZV3 MULTI 20W50 SHPD
12521.PDF24/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 220L
This oil is formulated for petrol engine, no turbo-charged. It can be used in mechanized farming and gardening engines as well as in lawn mowers.
It can also be used in diesel engines.
API SG/CD | CCMC G4/D4/PD2
Multigrade properties
Easy start at low temperature
High lubricating power, maximum protection.
Good thermic stability
Technical data
Viscosity at 40°C (cSt) : 102
Viscosity at 100°C (cSt) :14.2
Viscosity index : 140
Density at 20°C : 0.881
Viscosity at -20°C (cP) : 6500
The given data are typical data.
4 TEMPS 15W40 MOTOCULTURE
12526.PDF25/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
MULTI 20W50 TURBO is a mineral multigrade engine oil suitable for petrol or diesel passenger cars, with or without turbo charging, for prolonged motorway driving as well as stop-start run.
It is compatible with engines equipped with catalytic converters or using unleaded petrol, miscible with all standard engine oils and suitable all year round.
API SG / CE | MIL.L. 46152E | CCMC G4 / D4 / PD2Performance level : MB 227.5 | VW 505.00 / 501.01
High performance additives
Excellent temperature stability
Antiwear, detergent and dispersant properties.
Engine better cleaned
Oil consumption reduction
Technical data
Viscosity at 40°C (cSt) : 150
Viscosity at 100°C (cSt) : 17.9
Viscosity index : 130
Density at 20°C : 0.887
Viscosity at -15°C (cP) : 9000
The given data are typical data.
MULTI TURBO 20W50
12527.PDF24/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
2L | 5L | 30L | 60L | 220L
SUPER TURBO 15W40 is a high quality mineral engine oil suitable for petrol or diesel passenger cars with or without turbo charging. It is designed for : prolonged driving at high speed, urban run / stop and go...
It is perfectly suitable for use all year round. It is completely miscible with all standard engine oils.
API SL / CF | ACEA A3 / B3 Performance level : VW 505.00 / 501.01 | MB 229.1
High viscosity
Good thermic stability.
«New generation» additives
Use with lead-free petrol possible.
Multigrade properties
Easy start up at low temperature
High safety potential at high temperature.
Technical data
Viscosity at 40°C (cSt) : 104
Viscosity at 100°C (cSt) : 14.2
Viscosity index : 139
Density at 20°C : 0.880
Viscosity at -20°C (cP) : 6500
The given data are typical data.
SUPER TURBO 15W40
12529.PDF24/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 5L | 30L | 60L | 220L
This high quality oil is developed for engines of all petrol or diesel passenger cars, turbo-charged or not. It is also designed for motorcycle engines operating in severe conditions.
The wide viscosity range of this lubricant guarantees full protection of the engines all year round for use in urban area as well as for long motorway driving.
API SL / CF | ACEA A3 / B3Performance level : VW 505.00 / 501.01 | MB 229.1
Additives with low ash level
Engine better cleaned.
Multigrade properties
Easy start up at low temperature
High safety potential at high temperature.
Protection against varnishing and gumming
at high temperature, deposits and sludge
formation, oil shear due to speeds of
rotation, wear of the triggers and the nose
of cams
Lubrication of clutches or the gearboxes of
motorcycles possible
Technical data
Viscosity at 40°C (cSt) : 135
Viscosity at 100°C (cSt) : 18
Viscosity index : 145
Density at 20°C : 0.882
Viscosity at -20°C (cP) : 6800
The given data are typical data.
XT4 TURBO 15W50
12532.PDF24/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 5L | 30L | 60L | 220L
High performance fully synthetic oil developed for all engines of petrol or diesel passenger cars, including diesel engines equipped with direct injection (TDI, HDI, Common Rail).
This lubricant can be used all year round. It is completely miscible with all standard
engine oils.
API SM / CF | ACEA A3 / B3 / B4Performance level : VW 502.00 / 505.00 | MB 229.3
BMW LL98 | PORSCHE | RN 0700 / 0710
Detergent and antiwear properties
Engine better cleaned.
Low viscosity at low temperature
Cold starts improved and fuel savings.
Low volatility
Oil consumption reduction.
High lubricating power
Oil pressure maintained regardless service
conditions
Protection against seizure at high temperature.
Technical data
Viscosity at 40°C (cSt) : 88
Viscosity at 100°C (cSt) : 14.6
Viscosity index : 175
Viscosity at -30°C (cP) : 6350
Density at 20°C : 0.853
The given data are typical data.
HUSYNN 5W40
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12534.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 5L | 30L | 60L | 220L
Partly synthetic multigrade oil developed for all engines of petrol or diesel passenger cars with or without turbo-charger.
This lubricant is perfectly suitable for all driving conditions: urban runs, long motorway journey, stop and go. It can be used all year round and is completely miscible with all standard engine oils.
API SL / CF | ACEA A3 / B3 / B4Performance level : VW 501.01 / 505.00 | MB 229.1
Low viscosity at low temperature
Cold starts improved and fuel consumption
reduction.
Detergent and antiwear properties
Engine protection, engine life extended.
Good viscosity at high temperature
Safety and protection against seizure.
Excellent resistance to oxidation
Long-life lubricant.
Low volatility
Oil consumption reduction.
Technical data
Viscosity at 40°C (cSt) : 97
Viscosity at 100°C (cSt) : 14.2
Viscosity index : 150
Density at 20°C : 0.870
Viscosity at -25°C (cP) : 6500
The given data are typical data.
HUSYNN 10W40
Semi-synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12536.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 5L | 30L | 60L | 220L
High performance fully synthetic oil developed for petrol or diesel engines of passenger cars, including engines equipped with TDI, HDI, COMMON RAIL.
This high viscosity index oil is perfectly suitable for use all year round and is miscible with all standard engine oils.
API SM/CF | ACEA A3/B3/B4Performance level : VW 503.00 - 506.00 - 506.01
PORSCHE - BMW LL-98 | MB 229.3
High fluidity at low temperature
Fuel savings
Engine life extended.
Low volatility
Oil consumption reduction.
High dispersing power
Engine better cleaned
Exhaust fumes reduction.
Excellent temperature behaviour
Full protection at high temperature.
Technical data
Viscosity at 40°C (cSt) : 63.5
Viscosity at 100°C (cSt) : 11.6
Viscosity index : 180
Viscosity at -35°C (cP) : 6000
Density at 20°C : 0.857
The given data are typical data.
HUSYNN 0W30
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12537.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
High performance engine oil formulated with synthetic base oil and new generation additives. It is developed for petrol or diesel passenger cars, turbo-charged or not, with or without catalytic converters.
Suitable for use all year round. Miscible with all standard engine oils.
ACEA A3/B3 | API SJ/CFPerformance level : VW 501.01 - 505.00 | MB 229.1
High viscosity grade
Good protection at high temperature and
high speed
Oil consumption reduction
Engine wear prevented.
Oil meeting the latest requirements of
car manufacturers
Technical data
Viscosity at 40°C (cSt) : 135
Viscosity at 100°C (cSt) : 18.5
Viscosity index : 154
Viscosity at - 20°C (cP) : 6500
Density at 20°C : 0.873
The given data are typical data.
15W50 S
Semi-synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
2L | 220L
12538.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
RACING 10W50 S is a semi synthetic based oil for petrol or diesel passenger car with or without turbo charging, to be used in severe conditions, such as racing.
This oil is perfectly suitable for use all year round and is completely miscible with all standard engine oils.
API SL / CF | ACEA A3 / B3 / B4Performance level : PORSCHE | VW 505.00 / 501.01 | MB 229.1
Low viscosity at low temperature
Easy start up at low temperature
Engine wear reduced.
High viscosity at high temperature
Good lubrication.
Oil meeting the latest requirements of
car manufacturers
Technical data
Viscosit at 40°C (cSt) : 112
Viscosity at 100°C (cSt) : 17
Viscosity index : 165
Viscosity at -25°C (cP) : 6500
Density at 20°C : 0.873
The given data are typical data.
RACING 10W50 S
Semi-synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12539.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 200L
High performance engine oil developed for petrol and diesel passenger cars with turbo-charger as well as for trucks, agricultural and civil engineering equipment.
API CG4 / CF / SL | ACEA E2 / B3 / A3Performance level : MB 228.1 / 229.1 | VOLVO VDS | MAN 270 / 271
VW 501.01 / 505.00 | ALLISON C4 | CAT. T02MTU DDC Type 2 | MACK E0/L
Dispersant, detergent and antiwear
additives
Engine better cleaned
Extended drain intervals for heavy trucks
(20000 to 30000 kms according to the service).
High lubricating power
Full safety under extreme use conditions.
Especially developed for mixed fleet
Easier inventory control.
Technical data
Viscosity at 40°C (cSt) : 104
Viscosity at 100°C (cSt) : 14.2
Viscosity index : 139
Density : 0.882
Viscosity at -20°C (cP) : 6500
The given data are typical data.
ZT1 MULTI 15W40
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12540.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 5L | 30L | 60L | 220L
High quality semi-synthetic oil formulated for diesel engines of lorries and civil engineering and agricultural equipments, including turbo-charged, and meeting the most severe conditions.
API CI4 / SL | ACEA E7 / B4 | MAN 3275 | VOLVO VDS 3RENAULT RLD 2 | CATERPILLAR ECF/2
MB 228.3 | CUMMINS CES 20078MACK E0/M PLUS
Dispersant, detergent and antiwear
additives
Engine better cleaned
Extended drain intervals for heavy trucks
(40000 to 60000 kms according to the service).
Low viscosity at low temperature
Oil consumption reduced for passengers cars.
Especially developed for mixed fleet
Easier inventory control.
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 14
Viscosity index : 150
Density : 0.872
Viscosity at -25°C (cP) : 6500
The given data are typical data.
ZT4 10W40
Semi-synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
220L
12543.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High technology fully synthetic oil dedicated to Volkswagen motors (diesel or petrol) of the new generation of passenger cars (except models R5 and V10 TDI).
ACEA A3 / B4 | VW 504.00 / 507.00Compatible VW 503.00 / 503.01 / 506.00 / 506.01
BMW LL04 | MB 229.51
“Mid-SAPS” oil
Limited proportion in Sulphated Ash, Phosphorus
and Sulphur
Good working and longevity of those new
post-treatment systems (particulate filters,
3-way catalyst) improved.
Dispersing and detergent properties
Excellent engine protection and cleanness.
Low volatility
Oil consumption reduction.
High temperature stability
Full protection at very high temperature.
High viscosity index
Perfectly suitable for use all year round.
Technical data
Viscosity at 40°C (cSt) : 72
Viscosity at 100°C (cSt) : 12.2
Viscosity index : 168
Viscosity at -30°C (cP) : 6350
Density at 20°C : 0.850
The given data are typical data.
ECOSYNN 504/507 5W30
12544.PDF24/02/2010
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 60L | 220L
ZT5 10W40 is a synthetic-based oil developed for 4 stroke diesel engines working under heavy load and more especially for new engines EURO 4.
API CI4 | ACEA E4 / E7-08 | MB 228.5MAN 3275 - 3277 | SCANIA LDF-2 | VOLVO VDS 3
MTU DDC TYPE 3 | RENAULT TRUCK RXD/RLD-2 | MACK E0-M PLUSCUMMINS CES 20077-20078 | DAF EXTENDED DRAINS
Low viscosity at low temperature
Fuel consumption reduction.
«New generation» additives
Very long drain intervals (90000 to 120000 kms
according to the service).
Recommended for trucks, civil engineering
and agricultural equipements, when
oil quality is defined by the above
specifications
Technical data
Viscosity at 40°C (cSt) : 90.3
Viscosity at 100°C (cSt) : 13.6
Viscosity index : 152
Density : 0.882
Viscosity at -25°C (cP) : 6500
The given data are typical data.
ZT5 10W40
Semi-synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12545.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Fully synthetic lubricant formulated for hardly charged diesel 4-stroke engines. Particularly recommended for engines requiring EURO IV / V specifications and equipped with EGR (Exhaust Gas Recirculation) with or without particulate filters or with a system of reduction of Nitrogen Oxides (Selective Catalyst Reduction technology).
SAE 10W40 | ACEA E4/E6/E7D.B. 228.5/228.51 | MAN 3477/3277
MAN MTU Type3/Type 3.1 | RENAULT RVI RXD | VOLVO VDS-3
«Low SAPS» oil
Limited content in sulphated ash, sulfur
and phosphor
Longevity of those new systems improved.
«New generation» additives
Very long drain intervals.
Low viscosity at low temperature
Fuel economy.
Technical data
Viscosity at 40°C (cSt) : 90.3
Viscosity at 100°C (cSt) : 13.6
Viscosity index : 152
Density at 20°C : 0.882
Dynamic viscosity at -25°C (cP) : 6500
The given data are typical data.
ZT6 10W40
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12546.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Partly synthetic oil developed for 4-stroke engines and gearboxes of motorcycles operating under severe conditions or running in racing environment.
SAE 10W50 | API SJ | JASO MA
Antiwear and detergent properties
Engine life extended.
Low volatility
Oil consumption reduction.
High lubricating power
Maximum safety at high speed.
Technical data
Viscosity at 40°C (cSt) : 112
Viscosity at 100°C (cSt) : 17
Viscosity index : 165
Viscosity at -25°C (cP) : 6500
Density : 0.873
The given data are typical data.
CROSSROAD 10W50 4T
Semi-synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
1L
12547.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
High technological fully synthetic engine oil for the latest generation of passenger cars (especially for FORD and MADZA engines) equipped with post-treatment systems (Particulate Filters, Diesel Oxydation Catalyst).
SAE 5W30 | ACEA A5/B5/C1 | API SM/CF
«Low SAPS» oil
Limited content in sulphated ash, sulfur
and phosphor
Longevity of those new systems improved.
Low volatility
Oil consumption reduction.
Detergent and dispersant powers
Excellent engine protection and cleanness.
High temperature stability
Good protection at high temperature.
Low viscosity HTHS (high temperature
and high shear)
Fuel consumption significantly reduced.
Technical data
Viscosity at 40°C (cSt) : 72
Viscosity at 100°C (cSt) : 12.2
Viscosity index : 168
Viscosity at -30°C (cP) : 6350
Density at 20°C : 0.850
The given data are typical data.
ECOSYNN C1 5W30
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12548.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 60L | 220L
High technological fully synthetic engine oil for the latest generation of passenger cars (especially for Peugeot, Citroën, TOYOTA, HONDA, NISSAN and SUBARU engines) equipped with post-treatment systems (Particulate Filters, Diesel Oxydation Catalyst).
SAE 5W30 | ACEA A5/B5/C2 | API SM/CF
«Mid-SAPS» oil
Limited content in sulphated ash, sulfur
and phosphor
Longevity of those new systems improved.
Low volatility
Oil consumption reduction.
Detergent and dispersant powers
Excellent engine protection and cleanness.
High temperature stability
Good protection at high temperature.
Low viscosity HTHS (high temperature
and high shear)
Fuel consumption significantly reduced.
Technical data
Viscosity at 40°C (cSt) : 72
Viscosity at 100°C (cSt) : 12.2
Viscosity index : 168
Viscosity at -30°C (cP) : 6350
Density at 20°C : 0.850
The given data are typical data.
ECOSYNN C2 5W30
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12549.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 60L | 220L
High technological fully synthetic engine oil for the latest generation of passenger cars (especially for BMW, MERCEDES, OPEL, MITSUBISHI and ISUZU engines) equipped with post-treatment systems (Particulate Filters, Diesel Oxydation Catalyst).
SAE 5W30 | ACEA A3/B4/C3 | API SM/CFMB 229.51 | VW 502.00/505.00/505.01 | BMW LL-04
«Mid-SAPS» oil
Limited content in sulphated ash, sulfur
and phosphor
Longevity of those new systems improved.
Low volatility
Oil consumption reduction.
Detergent and dispersant powers
Excellent engine protection and cleanness.
High temperature stability
Good protection at high temperature.
High viscosity index
Perfectly suitable for use all year round.
Technical data
Viscosity at 40°C (cSt) : 72
Viscosity at 100°C (cSt) : 12.2
Viscosity index : 168
Viscosity at -30°C (cP) : 6350
Density at 20°C : 0.850
The given data are typical data.
ECOSYNN C3 5W30
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12550.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 60L | 220L
High technological fully synthetic engine oil for the latest generation of passenger cars (especially for RENAULT engines) equipped with post-treatment systems (Particulate Filters, Diesel Oxydation Catalyst).
API SM / CF | ACEA A3 / B4 / C4Renault RN 0720
«Low-SAPS» oil
Limited content in sulphated ash, sulfur
and phosphor
Longevity of those new systems improved.
Low volatility
Oil consumption reduction.
Detergent and dispersant powers
Excellent engine protection and cleanness.
High temperature stability
Good protection at high temperature.
High viscosity index
Perfectly suitable for use all year round.
Technical data
Viscosity at 40°C (cSt) : 72
Viscosity at 100°C (cSt) : 12.2
Viscosity index : 168
Viscosity at -30°C (cP) : 6350
Density at 20°C : 0.850
The given data are typical data.
ECOSYNN C4 5W30
Fully synthetic4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12551.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 60L | 220L
Detergent monograde oil used in certain small piston compressors and in hydraulic circuits.
API CE | CCMC D4 | MIL.L. 2104EPerformance level : ALLISON C4 | MB 227.0
Detergent and dispersant properties
Protection of all mechanism parts guaranteed.
Recommended by some manufacturers
to use it in gearboxes
Technical data
Viscosity at 40°C (cSt) : 43
Viscosity at 100°C (cSt) : 6.6
Viscosity index : 107
Density at 20°C : 0.879
The given data are typical data.
DET D3 10 2104 E
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
60L | 220L
12552.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
DET D3 2104E is a high performance monograde oil especially formulated for diesel engine, including turbo charged, operating under severe conditions. It is well suitable for trucks, plant and agricultural equipment requiring monograde oils and working at any speed and with any charge.
API CE | CCMC D4 | MIL.L. 2104 EPerformance level : ALLISON C4 | MB 227.0
Detergent and dispersant properties
Engine better cleaned
Engine life extended.
Recommended by some manufacturers
to use it in gearboxes, hydraulic circuits
and compressors
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 11.7
Viscosity index : 101
Density at 20°C : 0.890
The given data are typical data.
DET D3 30 2104 E
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12554.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
DET D3 2104E is a high performance monograde oil especially formulated for diesel engine, including turbo charged, operating under severe conditions. It is well suitable for trucks, plant and agricultural equipment requiring monograde oils and working at any speed and with any charge.
API CE | CCMC D4 | MIL.L. 2104 E | CATERPILLAR TO2Performance level : ALLISON C4 | MERCEDES 227.0
Detergent and dispersant properties
Engine better cleaned
Engine life extended.
Recommended by some manufacturers
to use it in gearboxes, hydraulic circuits
or compressor
Technical data
Viscosity at 40°C (cSt) : 150
Viscosity at 100°C (cSt) : 14.9
Viscosity index : 99
Density at 20°C : 0.896
The given data are typical data.
DET D3 40 2104 E
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12555.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This oil is developed for diesel engines, including turbo-charged, for trucks and civil engineering equipment working under severe conditions all year round.
API CE/SF | CCMC D4/G2/PD2 MIL.L. 2104E/46152B
Performance level : MB 227.1
Detergent and dispersant properties
Engine life extended.
High temperature stability
Good protection at very high tempeture.
Technical data
Viscosity at 40°C (cSt) : 132
Viscosity at 100°C (cSt) : 15.2
Viscosity index : 118
Density at 20°C : 0.890
Viscosity at -15°C (cP) : 9000
The given data are typical data.
MULTI DIESEL 20W40
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12557.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ZT3 MULTI 15W40 SHPD is a very high performance oil developed for diesel engines, of lorries and civil engineering equipments, including turbo-charged, and meeting the most severe conditions.
It is particularly recommended for modern fleet driving in motorway, urban area or operating on site. It is well suitable for turbo-charged diesel engines (vehicles
manufactured after 1983) operating at low speed and heavy loaded.
API CI4 / SL | ACEA E7 / B4 | MAN 3275 | VOLVO VDS 3RENAULT RLD 2 | CATERPILLAR ECF/2
MB 228.3 | CUMMINS CES 20078MACK E0/M PLUS
High Total Base Number
Extended drain intervals (60000 Kms).
Antiwear and detergent properties
Polish protection
Sludge avoided.
Excellent viscosity - temperature behaviour
Complete safety.
Technical data
Viscosity at 40°C (cSt) : 105
Viscosity at 100°C (cSt) : 14
Viscosity index : 139
Density at 20°C : 0.882
Viscosity at -20°C (cP) : 6500
The given data are typical data.
ZT3 MULTI 15W40 SHPD
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12558.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
5L | 30L | 60L | 220L
ZX 15W40 is a high quality multigrade oil for diesel engines with or without turbo charging.
It can also be used for petrol engines.
API CE/CF4/SG | ACEA E1CCMC D4/G4/PD2 | MIL.L. 2104E/46152B
MB 227.1
Detergent and dispersant properties
Engine better cleaned
Engine life extended.
Multigrade properties
Easy start up at low temperature
High safety potential at high temperature.
Technical data
Viscosity at 40°C (cSt) : 99.5
Viscosity at 100°C (cSt) : 14.3
Viscosity index : 145
Density at 20°C : 0.884
Viscosity at -20°C (cP) : 6500
The given data are typical data.
ZX 15W40
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
2L | 5L | 30L | 60L | 220L
12559.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil for gearboxes, differentials, rear axles, steering gears and all loaded gears where the manufacturers require API GL4 standard and SAE 80W viscosity grade.
SAE 80W | API GL4 | MIL.L. 2105
Recommended for manual synchronized
gearboxesTechnical data
Viscosity at 40°C (cSt) : 97
Viscosity at 100°C (cSt) : 11.2
Viscosity index : 98
Density at 20°C : 0.888
The given data are typical data.
EP 80W
MineralGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L
12561.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil for gearboxes, differentials, rear axles, steering gears and all loaded gears where the manufacturers require API GL4 standard and SAE 90 viscosity grade.
SAE 90 | API GL4 | MIL.L. 2105
Recommended for manual synchronized
gearboxesTechnical data
Viscosity at 40°C (cSt) : 172
Viscosity at 100°C (cSt) : 15.9
Viscosity index : 95
Density at 20°C : 0.890
The given data are typical data.
EP 90
MineralGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
2L | 30L | 60L | 220L
12562.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Gear oil for hypoid axles and all loaded gears where the manufacturers require API GL4 standard and SAE 140 viscosity grade.
SAE 140 | API GL4 | MIL.L. 2105
High viscosity
High lubricating power.
Technical data
Viscosity at 40°C (cSt) : 414
Viscosity at 100°C (cSt) : 29
Viscosity index : 97
Density at 20°C : 0.905
The given data are typical data.
EP 140
MineralGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12563.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Fully synthetic oil for manual gearbox and axle, especially developed to meet the manufacturers and car drivers requirements.
API GL4 | API GL5 | MIL.L. 2105E | API MT1 | MAN 341-342-3343 TYPE S |
VOLVO 97308 | MB 235.0-235.1SCANIA STO 1:0 | DAF | IVECO | RENAULT
Total drive line oil
Gear and axle lubricant rationalisation.
Multigrade properties
Easy start up at low temperature
High safety potential at high temperature.
High extreme pressure level
Ideal for use in final reductions (axles).
Light variation of the viscosity according
to the temperature
Compatible with synchro mesh
Technical data
Viscosity at 40°C (cSt) : 75
Viscosity at 100°C (cSt) : 14
Viscosity index : 190
Density at 20°C : 0.879
The given data are typical data.
SYNCHRO 75W90 TDL
Fully syntheticGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12564.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
Semi synthetic oil for all types of truck and civil engineering axles operating in severe conditions.
API GL5 | MIL.L. 2105 ERENAULT TRUCKS specifications satisfied
Good viscosity index
Efficient lubrication of the bearings ensured
at low temperature
Protection against wear at high temperature.
Antifoaming properties
Oil consumption and cavitation problems in
pumps reduced.
Extreme pressure additives
Formation of a resistant «lubricating film».
Excellent oxidation stability
Extended oil drains intervals ( 60 000 to
240 000 kms according to the equipment
and its use).
Technical data
Viscosity at 40°C (cSt) : 150
Viscosity at 100°C (cSt) : 15.4
Viscosity index : 105
Density : 0.897
The given data are typical data.
80W90 P
Semi-syntheticAxle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
220L
12565.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High performance oil especially developed for axles and differentials with limited slip.This lubricant is suitable for limited slip differentials of passenger car, construction machines and agricultural tractors.
It can also be used for the lubrication of manual gearboxes where a GL5 oil is
required.
API GL5 | MIL.L. 2105DZF TE-ML 05D/12C | FORD M2C 104A
Extreme pressure, antiwear, anticorrosion,
antirust, antifoaming additives
Diminution of juddering and its typical
noise when taking a bend at low speed.
Technical data
Viscosity at 40°C (cSt) : 194
Viscosity at 100°C (cSt) : 16.9
Viscosity index : 91
Density at 20°C : 0.902
The given data are typical data.
GX-LS 80W90
MineralGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12566.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
Partly synthetic multigrade oil developed for manual gearboxes.
API GL5 | MIL.L. 2105D
Low viscosity at low temperature
Easier gear shift at cold start.
Excellent oxidation stability
Protection against sludge and deposits
formation
Fuel consumption reduction
Neutral towards sealing materials
Technical data
Viscosity at 40°C (cSt) : 49.5
Viscosity at 100°C (cSt) : 7.5
Viscosity index : 113
Density at 20°C : 0.876
The given data are typical data.
SYNTHO 75W80
Semi-syntheticGearbox oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12567.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
Extreme pressure multigrade oil for transmissions, gearboxes, hypoid axles and reductions of vehicles and civil engineering equipment operating under severe conditions.
GX MULTI 80W90 is developed for gearboxes, differentials, final drives where API GL5 standard is required. For differentials and axles with limited slip, manufacturers generally recommend gear oil with friction modifying additives (we recommend then to use GX 90 LS).
API GL5 | MIL.L. 2105B / 2105C / 2105D | MAN 342 TYPE M1 MB 235.0 | DAF | RENAULT
Good viscosity index
Efficient lubrication of the bearings in cold
weather
Wear protection at high temperature.
Antifoaming properties
Oil consumption and cavitation problems in
pumps reduced.
Extreme pressure additives
Formation of a resistant «lubricating film».
Excellent oxidation stability
Extended drains intervals.
Technical data
Viscosity at 40°C (cSt) : 158
Viscosity at 100°C (cSt) : 15.4
Viscosity index : 98
Density at 20°C : 0.897
The given data are typical data.
GX MULTI 80W90
MineralGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12568.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 5L | 30L | 60L | 220L
Extreme pressure multigrade oil for transmissions, hypoid axles and reductions of vehicles and civil engineering equipment operating under severe conditions.
API GL5 | MIL.L. 2105D | VOLVO 97310
Good viscosity index
Efficient lubrication of the bearings in cold
weather
Wear protection at high temperature.
Antifoaming properties
Oil consumption and cavitation problems in
pumps reduced.
Extreme pressure additives
Formation of a resistant «lubricating film».
Excellent oxidation stability
Extended drains intervals.
Technical data
Viscosity at 40°C (cSt) : 410
Viscosity at 100°C (cSt) : 29
Viscosity index : 97
Density at 20°C : 0.908
The given data are typical data.
GX MULTI 85W140
MineralAxle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12569.PDF24/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
This oil was especially developed to meet the requirements of the manufacturers of the milking machines, compressors or vacuum pumps used in agriculture and dairy.
SAE 10W30
Antiwear and anticorrosion properties
Better protection of vacuum pumps.
Antifoaming additive
Cavitation problems in pumps avoided.
Desemulsion properties
No «lubricating film» break by water.
High index of viscosity
Quickly starting at low temperature
Correct stability of the viscosity at high
temperature.
Technical data
Viscosity at 40°C (cSt) : 78
Viscosity at 100°C (cSt) : 11.2
Viscosity index : 140
Viscosity -25°C (cP) : 6500
Density at 20°C : 0.875
The given data are typical data.
TRAYEUSE
MineralCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L
12572.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Multi purpose oil developed for the lubrication of all major tractor components : engines, wet brakes, transmission and hydraulic systems.
API CG4/CE/SF | API GL4 - GL5 (high torque – low speed)CCMC D4 | MIL.L. 2104D
JOHN DEERE DM J27 | MASSEY FERGUSSON M1139/1144FORD M2C 159B | MB 227.1
Friction modifying additive
Jamming effects prevented.
Detergent, dispersant, anticorrosion and
extreme pressure additives
Protection against varnishing, gumming
and deposits formation
No damage of the gaskets.
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 13.6
Viscosity index : 134
Density at 20°C : 0.887
Viscosity at -20°C (cP) : 6500
The given data are typical data.
ACCOFARM 15W40 FI
MineralMulti purpose oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12573.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High performance multi purpose oil developed for the lubrication of all major components of tractors and civil engineering equipment: engines, wet brakes, transmission and hydraulic systems.
It can also lubricates fixed compressors in building sites.
API CG4/CE/SF | MIL.L. 2104DAPI GL4 - GL5 (high torque – low speed) | JOHN DEERE JDM J27
MASSEY FERGUSSON M1139/1144 | FORD M2C 159 BFNH 8200920 : 1/2/3 | Compressor DIN 51506 VCL
High index of viscosity
Easy start up and working of the hydraulic
system improved at low temperature
Consumption fuel reduction
Components wear reduced.
Friction modifying additive
Jamming effects prevented.
Technical data
Viscosity at 40°C (cSt) : 88.5
Viscosity at 100°C (cSt) : 13.5
Viscosity index : 154
Density at 20°C : 0.871
Viscosity at -25°C (cP) : 6500
The given data are typical data.
ACCOFARM TP 10W40
MineralMulti purpose oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12578.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Up-market lubricant for automatic transmissions of vehicles for which a fluid of type DEXRON is advocated.
This red-coloured fluid, providing better performance than the ATF type A suffix A, can also be used in raising systems, power-steerings, suspensions, and some mechanical gearboxes.
G.M. DEXRON II D | ALLISON C4 | CATERPILLAR T O2 MB 236.7 | DENISON
Torque converter
High viscosity index (easy start up at low
temperature)
High resistance to oxidation (chemical
stability throughout time)
Important protection against rust, deposit,
wear, foam in order to avoid an obstruction
of the feeder pipes.
Gearbox
Extreme pressure properties to limit wear
Very good friction properties to avoid slipping
and hiccough when engaging the clutch
Perfect compatibility with elastomers
Detergent and dispersant properties to
avoid the formation of deposits.
Technical data
Colour : red
Viscosity at 40°C (cSt) : 36.7
Viscosity at 100°C (cSt) : 7.2
Viscosity index : 168
Density at 20°C : 0.869
The given data are typical data.
ACCOMATIC DEXRON I I
MineralAutomatic transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12581.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
2L | 30L | 60L | 220L
High performance lubricant especially formulated to meet the requirements of users of agricultural machinery and construction equipment.
ISO VG 68 | SAE 10W30 | API GL4JI CASE : MS 1206 - MS 1207 | JOHN DEERE : JDM J20C/D
FORD NEW HOLLAND : M2C 134 A/B/C/D, M2C 86 B/C, FNHA 2C 201.00MASSEY FERGUSSON : M1135 / M1143 / M1145
ZF TE-ML 03F/05F | CNH MAT 3525 | VOLVO VCE-WB 101CATERPILLAR T02 | ALLISON C3/C4
Very high viscosity index
Easy start up at low tempeture
High safety potential at high temperature.
Antifoaming properties
Cavitation problem in hydraulic pumps
prevented.
«Extreme pressure» additive
Protection against micro-welds and metal
wrenching.
Friction modifying additive
Constant brake of wet brakes and clutches
without noise or jerks ensured.
Technical data
Density at 20°C : 0.885
Viscosity at 40°C (cSt) : 62.0
Viscosity at 100°C (cSt) : 10.0
Viscosity index : 150
Viscosity at -25°C (cP) : 6800
The given data are typical data.
ACCOTRANS
MineralMulti purpose oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L | 60L | 220L
12582.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High performance lubricant especially formulated to meet the requirements of RENAULT and FIAT tractors.
This oil is developed for the lubrication of all hydraulic and mechanical transmissions as well as clutches and wet brakes.
RENAULT | FIATMASSEY FERGUSSON : M1135
CATERPILLAR TO2 | ALLISON C4
Very high viscosity index
Easy start up at low tempeture
High safety potential at high temperature.
Antifoaming properties
Cavitation problem in hydraulic pumps
prevented.
«Extreme pressure» additive
Protection against micro-welds and metal
wrenching.
Friction modifying additive
Constant brake of wet brakes and clutches
without noise or jerks ensured.
Technical data
Viscosity at 40°C (cSt) : 93.4
Viscosity at 100°C (cSt) : 12.2
Viscosity index : 124
Density at 20°C : 0.891
The given data are typical data.
ACCOTRANS RF
MineralMulti purpose oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12583.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOMATIC PLUS
1L | 5L | 220L
High quality lubricant designed for automatic transmissions (cars, buses…), power steering and other equipment where a DEXRON III-H type fl uid is recommended.
GM DEXRON III-H | FORD MERCON V | ALLISON C4 | VOITH G 607VW TL 52162 | ZF TE-ML 14 A | JASO 1A ATF | MB 236.9
Chrysler ATF +3/+4
“New generation” additives.
Excellent resilience to oxidation.
Anti wear property.
Extend the shelf-life of transmissions.
Can be used to replace Dexron II fl uids.
Technical data
Colour : colourless
Viscosity at 40°C (cSt) : 35.8
Viscosity at 100°C (cSt) : 8.0
Viscosity index : 200
Density at 20°C : 0.859
The technical data are for advisory purposes
only, these are typical data.
Semi-syntheticAutomatic transmission oil
12584.PDF29/11/2010
TECHNICAL DATA SHEET*
Printing date :
*Please regularly check that you have the latest up-to-date technical data sheet.
High quality lubricant developed for automatic transmissions where a DEXRON III type fluid is required.
It can aslo be used in place of DEXRON II fluids.
GM DEXRON III G/M | FORD MERCONALLISON C4 | MB 236.5 / 236.9
MAN 339 Type V1 / Z1
«New generation» additives
High resistance to oxidation.
Antiwear properties
Transmission life extended.
Technical data
Color : red
Viscosity at 40°C (cSt) : 35.8
Viscosity at 100°C (cSt) : 8.0
Viscosity index : 200
Density at 20°C : 0.859
The given data are typical data.
ACCOMATIC D3
Fully syntheticAutomatic transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
12585.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
1L | 30L | 60L | 220L
High quality universal transmission oil especially developed for plant equipment. It ensures the lubrication of gearboxes, clutches, wet brakes, final drives.
SAE 30 | API CFALLISON C4 | CATERPILLAR TO4 | EATON FULLER
KOMATSU MICRO CLUTCH | ZF TF - ML 01, 03
Friction and antiwear properties
Components damage prevented, equipment
life extended.
Good compatibility with elastomer and
resins
Breakdown, failures and excessive noise
reduced.
High stability in the time
Perfect working guaranteed, clutch slip
under heavy load prevented.
Technical data
Density at 20°C : 0.895
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 11.3
Viscosity index : 98
The given data are typical data.
TRANSMISSION T04
MineralGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
220L
12587.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Electrical insulating oil designed for transformers, circuit breakers and similar high-voltage devices.
IEC 60296 (03)Classe U (Uninhibited transformer oil)
Low viscosity
Good flowing of the oil down to - 42°C
Transformer efficiently cooled
Protection against electrical breakdown.
High resistance to oxidation
Reliable performance under a large range
of temperature.
Technical data
Density at 20°C : 0.885
Viscosity at 40°C (cSt) : 9
Viscosity at -30°C (cSt) : 1100
Acid number : 0.01 mg KOH/gl
Breakdown voltage : 43 KV
Pour point : -57°C
Flash point : 146°C
The given data are typical data.
TRANSFO
Naphtenic mineral Miscellaneous product
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 1000L
12604.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Highly refined white paraffin oil. It is tasteless, odorless and non-toxic.
It can also be used in food industry.
European PharmacopoeiaFDA 21 CFR 172.878
FDA 21 CFR 178.3620 (a)
Low volatility, chemical and thermic
stability
Use as lubricants or protection agent
against oxidation.
No toxicity
Application in veterinary, pharmaceutical
and cosmetic industries.
Technical data
Colour SAYBOLT : > +30
Density at 20°C : 0.855
Viscosity at 40°C (cSt) : 32
Viscosity at 100°C (cSt) : 5.4
Pour point (°C) : -15
Anilin point : 109
The given data are typical data.
CODEX 32
MineralCodex oil
*Please regularly check that you have the latest up-to-date technical data sheet.
855 kg
12608.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Highly refined white paraffin oil. It is tasteless, odorless and non-toxic.
It can also be used in food industry.
European PharmacopoeiaFDA 21 CFR 172.878
FDA 21 CFR 178.3620 (a)
Low volatility, chemical and thermic
stability
Use as lubricants or protection agent
against oxidation.
No toxicity
Application in veterinary, pharmaceutical
and cosmetic industries.
Technical data
Colour SAYBOLT : > +30
Density at 20°C : 0.860
Viscosity at 40°C (cSt) : 68
Viscosity at 100°C (cSt) : 8.7
Pour point (°C) : -15
Anilin point : 116
The given data are typical data.
CODEX VISQUEUSE G68
MineralCodex oil
*Please regularly check that you have the latest up-to-date technical data sheet.
20L | 860Kg
12609.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Highly refined white paraffin oil. It is tasteless, odorless and non-toxic.
It can also be used in food industry.
European PharmacopoeiaFDA 21 CFR 172.878
FDA 21 CFR 178.3620 (a)
Low volatility, chemical and thermic
stability
Use as lubricants or protection agent
against oxidation.
No toxicity
Application in veterinary, pharmaceutical
and cosmetic industries.
Technical data
Colour SAYBOLT : > +30
Density at 20°C : 0.850
Viscosity at 40°C (cSt) : 15
Viscosity at 100°C (cSt) : 3.4
Pour point (°C) : -15
Anilin point : 103
The given data are typical data.
CODEX FLUIDE G15
MineralCodex oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 20L | 850Kg
12610.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Naphthene-base oil developed for the lubrication of small precision devices, such as sewing machine.
It is particularly suitable for equipment in the textile and shoe industries.
ISO 3498 : VG 10 | IEC 60296 (03) | BS 148/98 I et II
Smooth rotation of the moving parts of
the sewing machines ensured
Perfect lubrication of the spindle bearings,
working at high speed
Noise reduced
Technical data
Viscosity at 20°C (cSt) : 29
Viscosity at 50°C (cSt) : 8
Density at 20°C : 0.892
Acid index : nil
Viscosity at -25°C (cSt) : 980
Pour point (°C) : -42
Fire point (°C) : 168
The given data are typical data.
BLANCHE H.3 TRANSFO
MineralMovement oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12611.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Oil developed for the greasing of the guides of chain saws.
It will be especially appropriate for the small chain saws whose blade does not exceed 25 cm.
ISO VG 100
Adhesive properties
Effective lubrication whatever the number
of revolutions of the chain
Wear reduction of the guide and the heels
of the chain
Quality of the cut improved
Chain life extended.
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 12
Viscosity index : 100
Density at 20°C : 0.879
The given data are typical data.
CHAÎNE
MineralMovement oil
*Please regularly check that you have the latest up-to-date technical data sheet.
220L
12614.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Oil developed for the greasing of the guides of chain saws. It will be especially appropriate for the small chain saws whose blade does not exceed 25 cm.
ISO VG 100
Adhesive and tackiness properties
Effective lubrication whatever the number
of revolutions of the chain.
Ejection spots avoided.
Reduction of the wear of the guide and the
heels of the chain.
Quality of the cut improved.
Chain life extended.
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 13.8
Viscosity index : 130
Density at 20°C : 0.880
The given data are typical data.
CHAÎNE FILANTE
MineralMovement oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L | 60L | 220L
12616.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
SOLUBLE K2 is a soluble lubricant developed for ferrous and non ferrous metal working : sawing, planing, cutting, turning, milling, drilling, boring, drawing, screwing.
It is generally used for metal working at medium up to high processing speed, with little friction and requiring good cooling.
This product must not be used for works with magnesium grey castings.
ISO - L - MAA
Good cooling, lubricating and wetting
properties
Corrosion and bacterial attack protection
Emulsion stability
Easy solubility
Recommendations
Change regularly soluble oils used for metal
working.
Maximum storage temperature : 65°C
The given data are typical data.
SOLUBLE K2
MineralMetal working oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L | 60L | 220L
12618.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Soluble cutting designed for metal working : turning, milling, drilling, sawing, cutting, boring, threading, screw cutting. It is formulated with corrosion inhibitors and efficient bactericides.
This product is used diluted by 4 to 6% in water according to work conditions.
ISO - L - MAH
Resistant to bacterial attacks
Antiwear and anticorrosion properties
High cooling power
No gumming of the sliding channels
Easily miscible with water, quick formation
(without heating) of a clear and very
stable micro-emulsion
Technical data
Biostable product | Colour : clear, amber
Density at 20°C : 0.99
PH-value 30 vol. % : 9.5
Corrosion test Herbert (IP 125) : 0/0-0
Foaming test IP 312 : initial / 5 mn ( mml) : 30/0
Take precautions when used with non
ferrous metals, particularly with copper and
aluminium.
Maximum temperature for storage : > 0°C
The given data are typical data.
COUPE LS 120
Semi-syntheticMetal working oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12620.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
MULTI COUPE K1 is a pure cutting oil, not mixable with water. It is developed for severe metal working with steel and steel alloyings. It does not stain the metal and has extreme pressure properties.
It is particularly suitable for the following metal workings : cutting with knife, shaving, grinding, screw cutting in steel ; screwing, deep drilling, boring, cutting of
gears, drawing, mortising, broaching ; sawing, turning, boring with twist drill.
ISO - L - MHE
Performance additives
Surface states of the tooled pieces improved
Tools wear decreased, by reducing the sticking
between the tool and the chips.
Technical data
Colour : brown
Density at 20°C : 0.916
Kinematic viscosity at 40°C (cSt) : 46
The given data are typical data.
MULTI COUPE K1
MineralMetal working oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12621.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOFLUID is an hydraulic oil and shows excellent performance. It has a broad range of application throughout the industry.
This oil can also be used for compressors : ALTAS COPCO : GA - XA - PR ; COMPAIR LUCHARD BROOMWADE : ROTOTAIR - RA - RX ; HOLMAN FIG : CR - RO - ZITAIR ; MANNESMAN DEZAG : SE - SC - SZ
AFNOR NFE 48603 : HM | DIN 51524 - 2 : HLP | ISO 3498 : VG 32
Performance additives
Oxidation resistance, protection against
corrosion, demulsibility and resistance to
foaming improved.
Antiwear properties
Long lasting use.
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt) : 32
Viscosity at 100°C (cSt) : 5.5
Viscosity index : 100
Density at 20°C : 0.867
Pour point (°C) : -30
The given data are typical data.
ACCOFLUID 32
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12622.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOFLUID is an hydraulic oil and shows excellent performance. It has a broad range of application throughout the industry.
AFNOR NFE 48603 : HM | DIN 51524-2 : HLP | ISO 3498 : VG 46
Performance additives
Oxidation resistance, protection against
corrosion, demulsibility and resistance to
foaming improved.
Antiwear properties
Long lasting use.
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt) : 46
Viscosity at 100°C (cSt) : 7.0
Viscosity index : 100
Density at 20°C : 0.870
Pour point (°C) : -25
The given data are typical data.
ACCOFLUID 46
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12623.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil with excellent performance that can be used in all hydraulic systems, stages and precision mechanisms functioning at high pressure and high temperature when an «extreme pressure» oil is not required.
AFNOR NF E 48603 : HM | ISO 3498 : VG 100 | DIN 51524-2 : HLP
Performance additives
Oxidation resistance, protection against
corrosion, demulsibility and resistance to
foaming improved.
Antiwear properties
Long lasting use (3000 to 20000 hours
according to operating conditions)
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt): 100
Viscosity at 100°C (cSt): 11.0
Viscosity index : 100
Density at 20°C : 0.873
Pour point (°C) : -20
The given data are typical data.
ACCOFLUID 100
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12624.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOFLUID is an hydraulic oil and shows excellent performance. It has a broad range of application throughout the industry.
This oil can also be used for vacuum pumps : ALFA-LAVAL type ALB oil
AFNOR NFE 48603 : HM | DIN 51524 - 2 : HLP | ISO 3498 : VG 68
Performance additives
Oxidation resistance, protection against
corrosion, demulsibility and resistance to
foaming improved.
Antiwear properties
Long lasting use.
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt) : 68
Viscosity at 100°C (cSt) : 8.8
Viscosity index : 100
Density at 20°C : 0.873
Pour point (°C) : -20
The given data are typical data.
ACCOFLUID 68
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12625.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOFLUID T is a high quality hydraulic oil for use in all hydraulic systems on industrial machinery or on mobile plant (building site equipment, agriculturalmachinery, transport equipment).
It is especially recommended for hydraulic systems working outside at very different temperatures and meets the requirements of high pressure hydraulic systems.
AFNOR NFE 48603 : HV | DIN 51524-2 : HLPDIN 51524-3 : HVLP | ISO 3498 : VG 32 | DENISON HF0
Good index of viscosity, good demulsibility
and antifoaming quality
Good energy transmission.
Antiwear, anticorrosion, antioxidant and
extreme pressure additives
Protection of the circuit elements.
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt) : 32
Viscosity at 100°C (cSt) : 6.5
Viscosity index : 150
Pour point (°C) : -48
Flash point : 190
Density : 0.865
The given data are typical data.
ACCOFLUID T32
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L | 60L | 220L
12626.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOFLUID T is a high quality hydraulic oil for use in all hydraulic systems on industrial machinery or on mobile plant (building site equipment, agricultural machinery, transport equipment).
It is especially recommended for hydraulic systems working outside at very different temperatures and meets the requirements of high pressure hydraulic systems.
AFNOR NFE 48603 : HV | DIN 51524-2 : HLPDIN 51524-3 : HVLP | ISO 3498 : VG 46 | DENISON HF0
Good index of viscosity, good demulsibility
and antifoaming quality
Good energy transmission.
Antiwear, anticorrosion, antioxidant and
extreme pressure additives
Protection of the circuit elements.
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt) : 46
Viscosity at 100°C (cSt) : 8.0
Viscosity index : 150
Pour point (°C) : -43
Flash point : 210
Density : 0.873
The given data are typical data.
ACCOFLUID T46
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L | 60L | 220L
12627.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOFLUID T is a high quality hydraulic oil for use in all hydraulic systems on industrial machinery or on mobile plant (building site equipment, agricultural machinery, transport equipment).
It is especially recommended for hydraulic systems working outside at very different temperatures and meets the requirements of high pressure hydraulic systems.
AFNOR NFE 48603 : HV | DIN 51524-2 : HLPDIN 51524-3 : HVLP | ISO 3498 : VG 68 | DENISON : HF0
Good index of viscosity, good demulsibility
and antifoaming quality
Good energy transmission.
Antiwear, anticorrosion, antioxidant and
extreme pressure additives
Protection of the circuit elements.
Neutral towards elastomers used in
industry
Compatible with silver-plated or bronze
elements
Technical data
Viscosity at 40°C (cSt) : 68
Viscosity at 100°C (cSt) : 10.7
Viscosity index : 150
Pour point (°C) : -37
Flash point : 220
Density : 0.879
The given data are typical data.
ACCOFLUID T68
MineralHydraulic oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12629.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
FLUID BIOSYNT HV 46
Synthetic hydraulic fl uid grade ISO VG 46, formulated from unsaturated carboxylic esters. Thanks to its specifi c additives, this fl uid holds remarkable antioxidant, anti wear and anticorrosion properties.
More than 70% biodegradable, FLUID BIOSYNTH HV 46 can be used in any hydraulic systems where there is a risk of accidental pollution of the environment : excavation equipment, farm equipment, off-shore installation,…
ISO DIS 6743/4 – cat HV | ISO 3498 : VG 46DIN 51524-3 : HVLP | 100% Synthetic
Biodegradability : >70% (norm ISO 9439)
Longer shelf-life than hydraulic fl uids formulated with vegetal bases.
High viscosity index and low pour point.Enables a use on a large temperature scale.
High level of biodegradability.
Compatible with hydraulic fl uids formulated with mineral or vegetal bases.
Compatible with all elastomers currently used in hydraulic systems.
Not compatible with natural rubber and synthetic EPDM rubber.
Technical data
Viscosity at 40°C (cSt) : 46
Viscosity at 100°C (cSt) : 9.4
Viscosity index : 184
Density at 20°C : 0.918
Pour point (°C) : -48
The technical data are for advisory purposes
only, these are typical data.
Fully syntheticHydraulic oil
30L | 60L | 220L
12630.PDF29/11/2010
TECHNICAL DATA SHEET*
Printing date :
*Please regularly check that you have the latest up-to-date technical data sheet.
This high quality oil is developed for engines of all petrol or diesel passenger cars, turbo-charged or not. It is also designed for motorcycle engines operating in severe conditions.
The wide viscosity range of this lubricant guarantees full protection of the engines all year round for use in urban area as well as for long motorway driving.
API SL / CF | ACEA A3 / B3Performance level : VW 505.00 / 501.01 | MB 229.1
Additives with low ash level
Engine better cleaned.
Multigrade properties
Easy start up at low temperature
High safety potential at high temperature.
Protection against varnishing and gumming
at high temperature, deposits and sludge
formation, oil shear due to speeds of
rotation, wear of the triggers and the nose
of cams
Lubrication of clutches or the gearboxes of
motorcycles possible
Technical data
Viscosity at 40°C (cSt) : 135
Viscosity at 100°C (cSt) : 18
Viscosity index : 145
Density at 20°C : 0.882
Viscosity at -20°C (cP) : 6800
The given data are typical data.
XT4 TURBO 15W50
12532.PDF24/02/2010
Mineral4 stroke motor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
TECHNICAL DATA SHEET*
Printing date :
1L | 2L | 5L | 30L | 60L | 220L
ACCOGEAR products have been developed for industrial gears operating under demanding conditions : heavy load, high speed and high temperature.Type of use : gears and bearings, reduction, spur, gear and worm gear, loaded bearing, hypoid bearing.
It is recommended not to mix this lubricant with extreme pressure oils formulated with lead or polyglycol.
US STEEL 224 | CINCINNATI MILACRON p.63DIN 51517 CLP part 3 | AGMA MILD EP | FORD M2C 83C
Extreme pressure additives
Oil film resistance under high load.
Thermal stability
Use at high temperature (130°C).
Excellent oxidation resistance and stability
Corrosion protection
Demulsibility and antifoaming properties
Wear, scuffing and seizure prevented
Technical data
Viscosity at 40°C (cSt) : 68
Viscosity at 100°C (cSt) : 8.9
Viscosity index : 100
Density at 20°C : 0.883
Viscosity AGMA : 2
The given data are typical data.
ACCOGEAR EP 68
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12633.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOGEAR products have been developed for industrial gears operating under demanding conditions : heavy load, high speed and high temperature.Type of use : gears and bearings, spur, gear and worm gear, loaded bearing, hypoid bearing. It is recommended not to mix this lubricant with extreme pressure oils formulated with lead or polyglycol.
US STEEL 224 | DIN 51517 CLP part 3 AGMA MILD EP | FORD M2C 83C
Extreme pressure additives
Oil film resistance under high load.
Thermal stability
Use at high temperature (130°C).
Excellent oxidation resistance and stability
Corrosion protection
Demulsibility and antifoaming properties
Wear, scuffing and seizure prevented
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 11.5
Viscosity index : 100
Density at 20°C : 0.887
Viscosity AGMA : 3
The given data are typical data.
ACCOGEAR EP 100
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12634.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOGEAR products have been developed for industrial gears operating under demanding conditions: heavy load, high speed and high temperature.Type of use : gears and bearings, spur, gear and worm gear, loaded bearing, hypoid bearing. It is recommended not to mix this lubricant with extreme pressure oils formulated with lead or polyglycol.
US STEEL 224 | CINCINNATI MILACRON p.77 CREUSOT LOIRE K 150 | DIN 51517 CLP part 3
AGMA MILD EP | FORD M2C 83C
Extreme pressure additives
Oil film resistance under high load.
Thermal stability
Use at high temperature (130°C).
Excellent oxidation resistance and stability
Corrosion protection
Demulsibility and antifoaming properties
Wear, scuffing and seizure prevented
Technical data
Viscosity at 40°C (cSt) : 150
Viscosity at 100°C (cSt) : 14.5
Viscosity index : 96
Density at 20°C : 0.891
Viscosity AGMA : 4
The given data are typical data.
ACCOGEAR EP 150
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12635.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOGEAR products have been developed for industrial gears operating under demanding conditions: heavy load, high speed and high temperature.Type of use : gears and bearings, spur, gear and worm gear, loaded bearing, hypoid bearing. It is recommended not to mix this lubricant with extreme pressure oils formulated with lead or polyglycol.
US STEEL 224 | CINCINNATI MILACRON p.74DIN 51517 CLP part 3 | AGMA MILD EP | FORD M2C 83C
Extreme pressure additives
Oil film resistance under high load.
Thermal stability
Use at high temperature (130°C).
Excellent oxidation resistance and stability
Corrosion protection
Demulsibility and antifoaming properties
Wear, scuffing and seizure prevented
Technical data
Viscosity at 40°C (cSt) : 220
Viscosity at 100°C (cSt) : 18.3
Viscosity index : 95
Density at 20°C : 0.896
Viscosity AGMA : 5
The given data are typical data.
ACCOGEAR EP 220
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12636.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOGEAR products have been developed for industrial gears operating under demanding conditions: heavy load, high speed and high temperature.Type of use : gears and bearings, spur, gear and worm gear, loaded bearing, hypoid bearing. It is recommended not to mix this lubricant with extreme pressure oils formulated with lead or polyglycol.
US STEEL 224 | CINCINNATI MILACRON p.59DIN 51517 CLP part 3 | AGMA MILD EP | FORD M2C 83C
Extreme pressure additives
Oil film resistance under high load.
Thermal stability
Use at high temperature (130°C).
Excellent oxidation resistance and stability
Corrosion protection
Demulsibility and antifoaming properties
Wear, scuffing and seizure prevented
Technical data
Viscosity at 40°C (cSt) : 320
Viscosity at 100°C (cSt) : 23.0
Viscosity index : 95
Density at 20°C : 0.900
Viscosity AGMA : 6
The given data are typical data.
ACCOGEAR EP 320
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12637.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
ACCOGEAR products have been developed for industrial gears operating under demanding conditions : heavy load, high speed and high temperature.Type of use : gears and bearings, spur, gear and worm gear, loaded bearing, hypoid bearing. It is recommended not to mix this lubricant with extreme pressure oils formulated with lead or polyglycol.
ISO DP 6743/6 CKC | US STEEL 224 CINCINNATI MILACRON p.35
DIN 51517 part 3 CLP | AGMA MILD EP
Extreme pressure additives
Oil film resistance under high load.
Thermal stability
Use at high temperature (130°C).
Excellent oxidation resistance and stability
Corrosion protection
Demulsibility and antifoaming properties
Wear, scuffing and seizure prevented
Technical data
Viscosity at 40°C (cSt) : 460
Viscosity at 100°C (cSt) : 31.0
Viscosity index : 96
Density at 20°C : 0.903
Viscosity AGMA : 7
The given data are typical data.
ACCOGEAR EP 460
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12638.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
POLYGLYCOL 220
20L | 220L
Fully synthetic fl uid formulated from polyalkylenglycols aimed at reducers and stages working in extreme conditions, especially in extreme temperature conditions (running nonstop between 130 and 230°C).
These lubricants are non miscible neither with mineral base oils, nor with synthetic fl uids type ester or PAO. Joints and painting must be equally adapted to the lubricants.
DIN 51517 part 3 CLP-PGISO VG 220
High viscosity index.
Enables a use on a large temperature scale.
High load capacity.
Technical data
Viscosity at 40°C (cSt) : 220
Viscosity at 100°C (cSt) : 40
Viscosity index : 236
Pour point (°C) : -27
Density at 20°C : 1.05
The technical data are for advisory purposes
only, these are typical data.
Fully syntheticSpecifi c fl uids
12639.PDF29/11/2010
TECHNICAL DATA SHEET*
Printing date :
*Please regularly check that you have the latest up-to-date technical data sheet.
Mineral oil developed for the lubrication of slide ways, hydraulic systems (32-68) and gearboxes of machine tools.
This lubricant is also suitable for the lubrication of industrial gears not submitted to severe conditions of use.
ISO 6743/4 : HG | DIN 51517-3 : CLP | DIN 51524-2 : HLP DIN 51502 : CG | AFNOR NF E 48-602 : HM | FRENCH STEEL FT 172 CINCINNATI MILACRON p.47 | VICKERS M2950S (pump 35 VQ 25)
Anti-stick-slip additive
Juddering and jerks avoided.
Extreme pressure additives
Oil film resistance under high load.
Oxidation resistance
Protection against corrosion
Wear prevented
Technical data
Viscosity at 40°C (cSt) : 68
Viscosity at 100°C (cSt) : 8.9
Viscosity index : 100
Density at 20°C : 0.883
The given data are typical data.
ACCOGLISS ASS. 68
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 60L | 220L
12642.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil developed for the lubrication of slide ways, hydraulic systems (32-68) and gearboxes of machine tools.
This lubricant is also suitable for the lubrication of industrial gears not submitted to severe conditions of use.
DIN 51517-3 : CLP | DIN 51524-2 : HLP | DIN 51502 : CG FRENCH STEEL FT 172 | CINCINNATI MILACRON p.50
BIJUR FILTRABILITE | ISO 6743/4 : HG
Anti-stick-slip additive
Juddering and jerks avoided.
Extreme pressure additives
Oil film resistance under high load.
Oxidation resistance
Protection against corrosion
Wear prevented
Technical data
Viscosity at 40°C (cSt) : 220
Viscosity at 100°C (cSt) : 18.3
Viscosity index : 95
Density at 20°C : 0.896
The given data are typical data.
ACCOGLISS ASS. 220
MineralMachine tool oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12645.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil recommended for the reciprocating air compressors of farm, building and garages equipment working under severe conditions and with final pressure about 15b.
DIN 51506 - VDL
Excellent thermic stability
Good protection at high temperature.
Oxidation resistance
Extended service life without modification
of the oil caracteristics.
Antirust additive
Reduction of deposits formation
Technical data
Viscosity at 40°C (cSt) : 101
Viscosity at 100°C (cSt) : 11.5
Viscosity index : 100
Density at 20°C : 0.887
The given data are typical data.
COMPRESSEUR 97
MineralCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
2L
12647.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Synthetic based oil developed for the lubrication of reciprocating air compressors.
DIN 51506 : VDL | ISO 6743/4A : L - DAC
Anticorrosion additives
Protection against corrosion due to
condensation in compressors or circuits.
High viscosity
Very good thermal stalility.
Protection against deposits formation
under heat in compressor chamber
Demulsibility properties
Quick clarification of water.
Technical data
Viscosity at 40°C (cSt) : 100
Viscosity at 100°C (cSt) : 10.2
Density at 20°C : 0.877
Viscosity index : 70
The given data are typical data.
COMPRESSEUR S100
Semi-syntheticCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L
12648.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil developed for the lubrication of all rotary, screw and vane type, air compressors when requiring the grade ISO 46.
It can also be used for the lubrication of the bearings of centrifugal compressors
when the temperature does not exceed 60°C.
ISO VG 46 | DIN 51506 VDL
High performance additives
Good air and water release
Coke formation minimized
Oxidation prevented.
Technical data
Viscosity at 40°C (cSt) : 46
Viscosity at 100°C (cSt) : 7.1
Viscosity index : 105
Density at 20°C: 0.869
The given data are typical data.
ACCOPRESS 46
MineralCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 30L
12649.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil developed for the lubrication of chains and guide of chain saws of medium and small size and with linear chain speed up to 80Km/h.
Adhesive properties
Metal protection.
Ejection spots avoided.
Oil consumption reduction.
Enough fluidity
Chain life extended.
Lubricating properties
Wear of each rivet limited.
Vibration and jamming avoided.
Guide protection.
Anticorrosion properties
Good protection even in humid conditions.
Technical data
Viscosity at 40°C (cSt) : 120
The given data are typical data.
CHAÎNE FILANTE «PRO»
MineralChain saw oil
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12653.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mineral oil developed for the lubrication of chains and guide of chain saws of medium and small size and with linear chain speed up to 80Km/h.
ISO VG 150
Adhesive properties
Metal protection.
Ejection spots avoided.
Oil consumption reduction.
Enough fluidity
Chain life extended.
Lubricating properties
Wear of each rivet limited.
Vibration and jamming avoided.
Guide protection.
Anticorrosion properties
Good protection even in humid conditions.
Technical data
Viscosity at 40°C (cSt) : 150
The given data are typical data.
CHAÎNE FILANTE «SUPER PRO»
MineralChain saw oil
*Please regularly check that you have the latest up-to-date technical data sheet.
220L
12654.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Synthetic lubricant especially developed for refrigerating compressors working under severe conditions with any refrigerant gas : chlorofluoro methanol (R12, R22...), ammonia, carbonic dioxide.
ISO VG 46
High chemical inertia
Excellent compatibility and miscibility with
CFC and HCFC.
Low pour point
Use in ammonia circuits possible.
Paraffin free
Deposits in the circuit and in the heat
exchangers avoided.
Use for air conditioning refrigerating
equipment or for heat pumps
Miscible with any mineral oil
Technical data
Density at 20°C : 0.866
Viscosity at 40°C (cSt) : 46
Viscosity at 100°C (cSt) : 5
Flash point (°C) : 180
Drop point (°C) : -35
Floc test (R22) (°C) : -55
Water content mg/kg : <100
The given data are typical data.
ACCOFREEZE S 46
Fully syntheticCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
20L
12662.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Synthetic lubricant especially developed for refrigerating compressors working under severe conditions with any refrigerant gas : chlorofluoro methanol (R12, R22...), ammonia, carbonic dioxide.
ISO VG 68
High chemical inertia
Excellent compatibility and miscibility with
CFC and HCFC.
Low pour point
Use in ammonia circuits possible.
Paraffin free
Deposits in the circuit and in the heat
exchangers avoided.
Use for air conditioning refrigerating
equipment or for heat pumps
Miscible with any mineral oil
Technical data
Density at 20°C : 0.866
Viscosity at 40°C (cSt) : 68
Viscosity at 100°C (cSt) : 6
Flash point (°C) : 190
Drop point (°C) : -33
Floc test (R22) (°C) : -55
Water content mg/kg : <100
The given data are typical data.
ACCOFREEZE S 68
Fully syntheticCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
20L | 208L
12663.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Synthetic lubricant especially developed for refrigerating compressors working under severe conditions with any refrigerant gas : chlorofluoro methanol (R12, R22...), ammonia, carbonic dioxide.
It can also be used for the lubrication of the cylinders of piston air compressor under severe conditions (reversing temperature > 200°C)
ISO VG 100
High chemical inertia
Excellent compatibility and miscibility with
CFC and HCFC.
Low pour point
Use in ammonia circuits possible.
Paraffin free
Deposits in the circuit and in the heat
exchangers avoided.
Use for air conditioning refrigerating
equipment or for heat pumps
Miscible with any mineral oil
Technical data
Density at 20°C : 0.866
Viscosity at 40°C (cSt) : 105
Viscosity at 100°C (cSt) : 7
Flash point (°C) : 200
Drop point (°C) : -35
Floc test (R22) (°C) : -50
Water content mg/kg : <100
The given data are typical data.
ACCOFREEZE S 100
Fully syntheticCompressor oil
*Please regularly check that you have the latest up-to-date technical data sheet.
20L | 208L
12664.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This product is a high quality emulsion of a very pure paraffin for the protection of wood.
It can be applied pure with a brush or sprayed diluted with 25% water.
Sewed wood protection
Very good shearing off stability
Technical data
Density : 0.930
pH : 8.7
The given data are typical data.
ANTI-GERCE ET FENTE
Miscellaneous product
*Please regularly check that you have the latest up-to-date technical data sheet.
60L | 220L | 1000L
12671.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Vegetal based oil (castor oil) for rear axles and worm reducers.
ACCOVIS R.C. can be used in all equipment when the manufacturers recommends castor oil.
It is only miscible with lubricants of the same nature : castor oil, rape seed, ...
API GL2 | SAE 90PEUGEOT (for axles of 203 - 403 - 404 modesl)
STAUB (for 6000 - 7000 and PP2X series)
Biodegradable lubricant
Antiwear properties for worm reducers
Corrosion prevented to the transmission
systems
Non-toxic
Technical data
Viscosity at 40°C (cSt) : 260
Viscosity at 100°C (cSt) : 20
Viscosity index : 87
Drop point (°C) : -30
Density : 0.959
The given data are typical data.
ACCOVIS R.C
VegetalGearbox, axle and transmission oil
*Please regularly check that you have the latest up-to-date technical data sheet.
2L
12673.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Product especially developed to facilitate demoulding of concrete from metal or wooden moulds.
Type of use : usual works, bases, walls, floors, beams, frameworks, in plant or on site.
Covering power from 25 to 45 m² per litre
(depending of the use, the application
mode and the formwork nature)
No mixing or preparation beforehand
Direct application of paint or coatings
on the cement after natural or heating
drying
ACCOFRA CIM2
Miscellaneous product
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 215L
12674.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Heat transfer fluid especially developed for the bending of PVC plastic at high temperature.
Formig of PVC pieces without deformation,
even on small applications
Non toxic
Simply cleaned by soaking in water
Technical data
Density : 1.261
Flash point (°C) : 160
Optimal bending temperature : between
120°C and 125°C
The temperature shall not overcome 125°C
The given data are typical data.
ACCOPVC
Miscellaneous product
*Please regularly check that you have the latest up-to-date technical data sheet.
30L
12677.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Heat transfer fluid recommended in all heat transfer systems working by recirculation in open or closed circuit. It can be used until 300°C in closed circuits with a high circulation speed and without hot points superiors to 320°C.
ISO 6743/0 LQ | ISO 6743/1 L-AN | ISO 6743/12 L-QBDIN 51502 L | DIN 51517-1 LC
Anticorrosion properties
Good circuit protection.
Antioxidant properties
Extented product life.
Low pyrolisis tendency
No deposits
Good heat transfer.
High flash point
Use in complete safety
Low steam pressure
Loss by evaporation reduced.
Miscible with mineral oils of the same kind
Technical data
Viscosity at 40°C (cSt) : 31
Viscosity at 100°C (cSt) : 5.3
Viscosity index : 100
Flash point (°C) : 230
Density : 0.867
The given data are typical data.
ACCOTHERM 500
Miscellaneous product
*Please regularly check that you have the latest up-to-date technical data sheet.
30L | 220L
12682.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This grease, with a calcium soap base, is insoluble in water and has a good resistance to washing by water. It is suitable for the lubricating of numerous industrial equipments exploited in moderate conditions of temperature, speed and load.
Type of use : not very loaded bearings , articulations , sliding channel, bearing of water pump, assembly of adjusted components
NLGI 2
Very good resistance to oxidation
Perfect quality in the time.
High smoothness
All means of lubricating allowed.
Anticorrosion properties
Very good sticking
Technical data
Nature of the soap : calcium
Colour : blond
Penetration [NF T 60-132] (1/10mm) : 270/300
Solubility in water : insoluble
Limit temperature of use (°C) : -20 to +60
Drop point [METTLER method] (°C) : 105
The given data are typical data.
ACCOGRAISSE BLONDE
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g | 5Kg | 25Kg | 50Kg | 180Kg
12912.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality grease for multiple use, particularly for the car, industry, and civil engineering.
Type of use : moderately loaded bearings, sliding channel, textile machine under moderate load and high speed until 3000 revs/mn ; general lubricating of tractors, trailer, hubs of civil engineering machine ; articulations, universal joints, pumps, ...
NLGI 2
«Extreme pressure» properties
Wear components in movement reduced.
Very good sticking
Excellent quality in service.
Very good lubricating power
Technical data
Nature of the soap : lithium
Color : amber
Appearance : smooth
Penetration [NF T 60-132] (1/10mm) : 265/285
Limit temperature of use (°C) : -20 to +140
4 weld balls [ASTM D 2596] (Kg) : 200
4 wear balls 1h/40kg [ASTM D 2266] (mm) : 0.70
Corrosion Cu 3 h/100°C [ASTM D 4048] (b) : 1
Oxidation after 100 h [ASTM D 942] (psi) : < 7
EMCOR Test distilled water [NF T 60-135] : 1
Wash out [ASTM D 1264] at 80°C (% weight) : < 4
Wheel bearing [ASTM D 1263] at 105°C : 1
The given data are typical data.
ACCOGRAISSE LITHIUM MULTI
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g | 900g | 5Kg | 25Kg | 50Kg | 180 Kg
12914.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Industrial grease of high quality, for multiple uses, insoluble in water. It is adapted to equipment working under high temperature and heavy loads or subject to important extra load due to shocks. Suitable for smooth bearings, ball bearings, hubs of wheel, very loaded bearings...
NLGI 3
«Extreme pressure» additive
Wear components in movement reduced.
Very good resistance to oxidation
Perfect quality in the time.
Anticorrosion additive
Technical data
Nature of the soap : lithium
Color : amber | Appearance : smooth
Penetration [NF T 60-132](1/10mm) : 220/250
Corrosion Cu 3 h/100°C [ASTM D 4048] (b) : 1
Limit temperature of use (°C) : -20 to +150
EMCOR Test distilled water [NF T 60-135] : 1
4 weld balls [ASTM D 2596] (Kg) : 250
4 wear balls 1h/40kg [ASTM D 2266] (mm) : 0.55
Oxidation after 100 h [ASTM D 942] (psi) : < 7
Wash out [ASTM D 1264] at 80°C (% weight) : < 4
Wheel bearing [ASTM D 1263] at 105°C (g) : 1
Drop point [METTLER method] (°C) : 195
The given data are typical data.
ACCOGRAISSE EP3
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
900g | 25Kg
12950.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Grease with nonsoap thickener developed for industrial applications under high-temperature conditions.
Type of use : ventilator bearings, oven doors, oven conveyors, mixing mill, dryers ; thermometrical wells ; plain and antifriction bearings, ball and roller bearings, under heavy load at low speed and high temperature ; running wheel and caterpillar of building site equipment working in water
NLGI 2
High thermic stability
Good lubrication up to 300°C.
Anticorrosion additive
Protection of all mechanical elements.
Excellent resistance to water, hot or
cold weather
Technical data
Nature of soap : nonsoap
Colour : light amber | Appearance : smooth
Penetration [NF T 60-132] (1/10 mm) : 270/300
4 weld balls [ASTM D 2596] (Kg) : 200
Limit temperature of use (°C) : -15 to +300
The given data are typical data.
ACCOGRAISSE HT 200
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g | 25 Kg
12952.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality lithium grease, for multiple uses, insoluble in water developed for equipment working under high temperature and heavy loads. It is suitable for the lubrication of : loaded bearings, ball bearings, gears, articulations, coupling, sliding channels, universal joints, water pumps, civil engineering equipment, ...
NLGI 2
«Extreme pressure» additives
Wear components in movement reduced.
Anticorrosion additive
Protection of all mechanical elements.
High thermic stability under heavy loads
Technical data
Nature of the soap : lithium
Colour : amber | Appearance : smooth
Penetration [NF T 60-132] (1/10 mm) : 265/295
Corrosion Cu 3 h/100°C [ASTM D 4048] (b) : 1
Limit temperature of use (°C) : -20 to +140
EMCOR Test distilled water [NF T 60-135] : 0
4 weld balls [ASTM D 2596] (Kg) : 250
4 wear balls 1h/40kg [ASTM D 2266] (mm) : 0.55
Oxidation after 100h [ASTM D 942] (psi) : < 6
Wash out [ASTM D 1264] at 80°C ( % weight ) : < 4
Wheel bearing [ASTM D 1263] at 105°C (g) : 2
Drop point [METTLER method] (°C) : 195
The given data are typical data.
ACCOGRAISSE EP2
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g | 900g | 5Kg | 25Kg | 50Kg | 180Kg
12953.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Extreme pressure lithium grease for difficult lubricating and recommended for the lubrication of organs subject to repeated shocks or vibratory phenomenon requiring a very high quality lubrication with spaced out lubricating like ball-and-socket joints, articulations, fluted shafts.
NLGI 2
Extreme pressure properties
Addition of molydenum disulphide (MOS2).
Good resistance to oxidation
Perfect quality in the time.
Anticorrosion additives
Protection of all mechanical elements.
Perfect mechanical and thermic stability
Good adhesion
Good resistance to water
Technical data
Nature of the soap : lithium
Colour : black | Appearance : smooth
Penetration [NF T 60.132](1/10mm) : 270 / 300
Limit temperature of use (°C) : -20 to +140
Corrosion Cu 3 h/100°C [ASTM D 4048] : 1 b
Oxidation after 100 h [ASTM D 942] (psi) : 7.8
EMCOR Test distilled water [NF T 60.135] : 1
Wash out [ASTM D 1264] at 80°C : 3.9 % weight
Wheel bearing [ASTM D 1263] at 105°C (g) : 2
4 weld balls [ASTM D 2596] (Kg) : 250
4 wear balls 1h/40 kg [ASTM D 2266] (mm) : 0.55
Drop point [METTLER method] (°C) : 192
The given data are typical data.
ACCOGRAISSE STEELBLACK MO
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g | 5Kg | 25Kg | 50Kg | 180Kg
12955.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Mix of waxes and high refined oils for industry oils : thickener of printing ink, non-stick, demoulding, electrical insulating, electrical wiring up.
Good resistance to oxidation
Wires getting out facilitated.
Neutral
Inflation or retraction of the shafts avoided.
Stable and neutral for plastic materials
Technical data
Drop point (°C) : 70
Penetration [NF T 60-119] (1/10mm) : 150-170
Density : 0.9
Smell : Light
Temperature of use : < 40°C
The given data are typical data.
ACCOGRAISSE VASELINE T 910
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
175Kg
12956.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality calcium soap grease in aerosol spray. Suitable to grease all tools where access is difficult. This grease is reversible : if the temperature overtakes 150°C and provokes its fusion, it returns at its consistency and nearly normal appearance as soon as temperature drops under 150°C.
Suitable for lubrication : material in contacts with sea water ; all low speed and heavy load bearings (500 to 6000 revs/mn) ; all joints, sliding channels.
NLGI 2
«Extreme pressure» additives
Wear components in movement reduced.
Water insoluble (boiling water, steam
and sea water)
Good and long lubrication.
Technical data
Limit temperature of use (°C) : -20 to +110
Drop point (°C) : 150
Penetration [NF T 60-132] (1/10mm) : 285/280
4 balls weld [ASTM D 2596] (Kg) : 350
The given data are typical data.
ACCOGRAISSE ACCOJET
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
500ml
12957.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality calcium soap grease in aerosol spray used to lubricate open gears (right, conical, helical gears) cables and chains.
It is developed for use of all difficult accesses but neither for automatic lubricating, nor worm gears.
NLGI 1
Good lubricating power
Frictions reduced with no deposit effect on
the gear teeth despite high temperature,
shocks and vibrations.
Resistance to water, heat and strong
pressures
Long-term lubrication.
Technical data
Limit temperature of use (°C) : -20 to 160
Drop point (°C) : 200
Penetration [NF T 60-132] (1/10mm) : 350/370
The given data are typical data.
ACCOGRAISSE ACCOBISON
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
500ml
12958.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Tasteless, odourless and colourless grease formulated with components authorised by the French Health ministry for any incidental contact with food products of any kind.
It can be used for lubricating : smooth bearings, cams, roll bearings, chain axles and links, sliding channel, fruit and grapes picker machines...
NLGI 2
Long lasting adhesion
No interaction with food and drinks
Water resistant, water wash out resistant
Very good antisoldering power
Technical data
Nature du savon : inorganic
Colour : colourless-translucent
Appearance : smooth
Penetration [NF T 60-132] (1/10 mm) : 265/295
Corrosion Cu 3 h/100°C [ASTM D 4048] : 1 b
Limit temperature of use (°C) : -20 to + 200
Oxidation after 100h [ASTM D 942] (psi) : 2
Oxidation after 300h [ASTM D 942] (psi) : 3.5
Oil bleeding 30 h/100°C [AIR 1650 A] (% weight) : < 5
Wash out [ASTM D 1264] à 80°C (% weight) : 1.5
Wheel bearing [ASTM D 1263] à 105°C (g) : 1
Dropping point [METTLER] (°C) : none
The given data are typical data.
ACCOGRAISSE BLANCHE ALIMENTAIRE
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g
12960.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
HT 600 consists in some aluminium powder in a mineral support. The graphite, with a sublimation temperature at 3600°C, allows a temperature of use at 1000°C.
Seizure and chemical, atmospheric or
thermal corrosion prevented
Rust and oxidation protection
Easier assembling and dismantle of
some mechanical pieces
Technical data
Colour : silver | Appearance : pasty
Penetration [NF T 60-132] (1/10mm) : 190 / 320
Maximum temperature of use (°C) : 1000
Density : 1.100
The given data are typical data.
ACCOGRAISSE HT 600
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
1 Kg
12961.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality lithium grease for multiple uses recommanded for the lubrication of reduction and motoreduction axles and for all centralized lubricating systems (e.g. Meca Fluid). It is also used as a sealant instead of some oils.
It must be used when smooth grease EP 00 is recommended.
NLGI 00
«Extreme pressure» additives
Reduced wear of components in movement.
Inhibitors of corrosion and oxidation
Insoluble in water
Technical data
Nature of the soap : lithium
Colour : amber | Appearance : smooth
Penetration [NF T 60-132] (1/10 mm) : 400/430
Corrosion Cu 3 h/100°C [ASTM D 4048] : 1 b
Limit temperature of use (°C) : -35 to +135
EMCOR Test distilled water [NF T 60-135] : 0
4 weld balls [ASTM D 2596] (Kg) : 250
4 wear balls 1h/40kg [ASTM D 2266] (mm) : 0.50
Oxidation after 100 h [ASTM D 942] (psi) : < 6
Drop point [METTLER method] (°C) : 180
The given data are typical data.
ACCOGRAISSE E.P.00
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
5Kg | 25Kg | 50Kg | 180Kg
12962.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Multipurpose grease for difficult lubricating especially resistant to rust, water or high temperature.
It is ideal for the lubrication of civil engineering equipment and machine-tool working under heavy load or at high temperature. Also suitable for the general lubrication of trucks (articulations, bearings, trailer turntables).
NLGI 2
High properties of adhesion and extreme
pression resistance
Metal tearing avoided.
«Extreme pressure» additives
Reduced wear of components in movement.
Longer lubrication periods
Insoluble in water
Technical data
Soap nature : chemical complex
Colour : green | Appearance : smooth
Penetration [ASTM D-217] : 265 / 295
Recommended temperature range (°C) : -20 /+150
4 balls welding load (Kg) : 315
Dropping point [Mettler] (°C) : 190
The given data are typical data.
ACCOGRAISSE SUPER ADHéRENTE
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
400g | 50Kg
12963.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality lithium grease for multiple uses recommanded for the lubrication of reduction and motoreduction axles and for all centralized lubricating systems (e.g. Meca Fluid). It is also used as a sealant instead of some oils.
It must be used when smooth grease EP 000 is recommended.
NLGI 000
«Extreme pressure» additives
Reduced wear of components in movement.
Inibitors of corrosion and oxidation
Insoluble in water
Technical data
Nature of the soap : lithium
Colour : amber | Appearance : smooth
Penetration [NF T 60-132] (1/10 mm) : 450/470
Corrosion Cu 3 h/100°C [ASTM D 4048] : 1 b
Limit temperature of use (°C) : -40 to +110
EMCOR Test distilled water [NF T 60-135] : 0
4 weld balls [ASTM D 2596] (Kg) : 250
4 wear balls 1 h/40 kg [ASTM D 2266] (mm) : 0.55
Drop point [METTLER method] (°C) : 150
The given data are typical data.
ACCOGRAISSE E.P.000
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
900g | 25Kg
12969.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
High quality lithium grease for multiple uses recommanded for the lubrication of reduction and motoreduction axles and for all centralized lubricating systems (e.g. Meca Fluid). It is also used as a sealant instead of some oils.
It must be used when smooth grease EP 0 is recommended.
NLGI 0
«Extreme pressure» additives
Reduced wear of components in movement.
Inhibitors of corrosion and oxidation
Insoluble in water
Technical data
Nature of the soap : lithium
Colour : amber | Appearance : smooth
Penetration [NF T 60-132] (1/10 mm) : 355/385
Corrosion Cu 3 h/100°C [ASTM D 4048] : 1 b
Limit temperature of use (°C) : -32 to +145
EMCOR Test distilled water [NF T 60-135] : 0
4 weld balls [ASTM D 2596] (Kg) : 250
4 wear balls 1h/40kg [ASTM D 2266] (mm) : 0.55
Oxidation after 100 h [ASTM D 942] (psi) : < 6
Drop point [METTLER method] (°C) : 185
The given data are typical data.
ACCOGRAISSE E.P.0
Grease
*Please regularly check that you have the latest up-to-date technical data sheet.
25Kg
12970.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This amber-coloured antifreeze is formulated with high quality monoethylene glycol base, corrosion and emulsion inhibitors.
It has been developed for the «new generation» engines and more especially to meet the following car manufacturers requirements: MERCEDES - BMW – MTU.
ASTM D 3306 | SAE J1034 | MERCEDES 325.2BS 6580 | ONORM V 5123 | AFNOR NF R 15-601
Efficient and long lasting protection of
the engine and the cooling system
components, including those in aluminium
Anticorrosion and antifoaming additives
Exempt from potentially harmful
additives such as nitrites, amines and
phosphates
To ensure good cooling it is recommended
to use from 25% to 50% volume of
ACCOGEL N 325 in the coolant solution
Technical data
Density at 20°C : 1.127
Boiling point (°C) : 176
Reserve alkalinity : > 20
Pure antifreeze pH: 8.1
Diluted antifreeze pH 33% : 8 - 8.5
Foaming (ml) : < 50
Break time (s) : 3
M.E.G. (%) : 95
The given data are typical data.
ACCOGEL N 325
Antifreeze
*Please regularly check that you have the latest up-to-date technical data sheet.
20L | 60L | 210L
16510.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Antifreeze formulated with high quality monoethylene glycol base, anticorrosion and antifoaming additives. It has been developed for the «new generation» engines. It can also be used in industrial heating systems without sanitary hot water production.
It meets the requirements of following car and trucks manufacturers: DAIMLER BENZ – FIAT – FORD – GM – PEUGEOT – RENAULT.
AFNOR NF R 15-601 – type 1
Efficient and long lasting protection of the
engine and the cooling system components,
including those in aluminium
Anticorrosion and antifoaming additives
Exempt from potentially harmful
additives such as nitrites, amines and
phosphates
Resistant to hard water
To ensure good cooling it is recommended
to use from 25% to 50% volume of
ACCOGEL M.E.G. in the coolant solution
Technical data
Density at 20°C : 1.125
Boiling point (°C) : 176
Reserve alkalinity : > 16
Pure antifreeze pH : 8.1
diluted antifreeze pH 33% : 8
Foaming (ml) : < 50
Break time (s) : 3
M.E.G. (%) : 95
Weight loss : < 0.4 mg/cm on copper-
welds-brass-steel-iron cast-aluminium
The given data are typical data.
ACCOGEL ANTIGEL M.E.G
Antifreeze
*Please regularly check that you have the latest up-to-date technical data sheet.
2L | 5L | 20L | 60L | 210L
16511.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
Accor sanitary antifreeze is a protecting antifreeze at low temperature, non toxic and non corrosive.
It is formulated to be used in central heating systems and industrial refrigerator installations.
No solvent
Neutral to joints and elastomer membranes
Antifreeze and anticorrosion properties
Technical data
Density : 1.050 (20°C) +/- 0.01
Colour : red
Boiling T° at atmospheric pressure (°C) : 197
pH in solution at 30% vol. : 7.7
Reserve alkalinity : 8
Flash point (°C) : 125
Foaming test (ml) : 9.8
Stability (s) : 4.5
The given data are typical data.
ANTIGEL SANITAIRE
Antifreeze
*Please regularly check that you have the latest up-to-date technical data sheet.
20L | 60L | 210L
16512.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This blue-colored coolant is formulated with high quality monoethylene glycol, distilled water and corrosion inhibitors.
It has been developed in accordance with the latest car and truck manufacturers requirements.
NF R 15-601 – Type 2
High boiling point
Good cooling of the engine ensured.
Anticorrosion additives
Full protection of the radiator components,
including those made in aluminium.
Protection against freezing down to -30°C
Pre-diluted and ready to be used
Technical data
Density : 1.070
M.E.G. + inhibitors (%) : 48
pH : 8.1
Reserve alcanility : 10.8
Boiling point : 107
Foaming volume (ml) : ≤ 50
Break time (s) : ≤ 3
Weight loss : 0.4 mg/cm on steel-iron cast-
copper-brass-welds-aluminum
The given data are typical data.
ACCORAL PERMANENT -30°C
Coolant
*Please regularly check that you have the latest up-to-date technical data sheet.
60L | 210L
16513.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This blue-coloured coolant is formulated with high quality monoethylene glycol, distilled water and corrosion inhibitors.
It has been developed in accordance with the latest car and truck manufacturers requirements.
NF R 15-601 – Type 2
High boiling point
Good cooling of the engine ensured.
Anticorrosion additive
Full protection of the radiators components,
including those made in aluminium.
Protection against freezing down to -25°C
Pre-diluted and ready to be used
Technical data
Density : 1.064
M.E.G. + inhibitors (%) : 41
pH : 8.1
Reserve alkalinity : 9.8
Boiling point : 106
Foaming volume (ml) : ≤ 50
Break time (s) : ≤ 3
Weight loss : 0.4 mg/cm on steel-iron cast-
copper-brass-welds-aluminium
The given data are typical data.
ACCORAL PERMANENT -25°C
Coolant
*Please regularly check that you have the latest up-to-date technical data sheet.
5L | 20L | 60L | 210L
16515.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :
This blue-coloured coolant is formulated with high quality monoethylene glycol, distilled water and corrosion inhibitors.
It has been developed in accordance with the latest car and truck manufacturers requirements.
NF R 15-601 – Type 3
High boiling point
Good cooling of the engine ensured.
Anticorrosion additive
Full protection of the radiators components,
including those made in aluminium.
Protection against freezing down to -35°C
Pre-diluted and ready to be used
Technical data
Density : 1.075
M.E.G. + inhibitors (%) : 48
pH : 8.1
Reserve alkalinity : 11.5
Boiling point : 108
Foaming volume (ml) : ≤ 50
Break time (s) : ≤ 3
Weight loss : 0.4 mg/cm on steel-iron cast-
copper-brass-welds-aluminium
The given data are typical data.
ACCORAL PERMANENT -35°C
Coolant
*Please regularly check that you have the latest up-to-date technical data sheet.
60L | 210L
16516.PDF25/02/2010
TECHNICAL DATA SHEET*
Printing date :