LMS31-Chapter_2 Features

Post on 28-Oct-2014

38 views 1 download

description

ciscoworks

Transcript of LMS31-Chapter_2 Features

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-1CiscoWorks LMS 3.1 Tutorial

Chapter 2

CiscoWorks LMS 3.1 New Features

Chapter 2

CiscoWorks LMS 3.1 New Features

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-2CiscoWorks LMS 3.1 Tutorial

Chapter 2 OutlineLMS Portal

CiscoWorks Assistant

Common Services

Campus Manager

Resource Manager Essentials

Internetwork Performance Monitor

Device Fault Manager

CiscoView

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-3CiscoWorks LMS 3.1 Tutorial

LMS PortalLMS Portal

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-4CiscoWorks LMS 3.1 Tutorial

LMS PortalOverview

What’s New in the LMS PortalMulti-Instance PortletsNew Portlets Enhanced Portlets.Portal Logging

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-5CiscoWorks LMS 3.1 Tutorial

Add Portlet

Click the + icon to add a portlet

LMS PortalMulti-Instance Portlets

Multi-Instance Portlets are now highlighted with a yellow icon

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-6CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: CDA Error Summary

By default this portlet is in the RME view, however it can be added to any view

Provides information about the Resource Manager Essentials devices having errors with credentials such as SNMP, Telnet, SSH etc.Displays device count where corresponding reports can be launched

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-7CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: Device Allocation Summary

By default this portlet is in the CS view, however it can be added to any view

Displays the summary of devices managed by each application, or devices not managed by “any” applicationsIn a multi-server deployment, the portlet will display device management information about both the master and slave servers

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-8CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: DFM Events Summary

By default this portlet is in the DFM view, however it can be added to any view

View Screen

Configuration Screen

Displays the details of the events encountered on the devicesUser will be able to configure the events types (Critical, Warning, and Informational).

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-9CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: IPM Availability Dashboard

By default this portlet is in IPM view, however it can be added to any view

View Screen Configuration Screen

Displays the information about the number of collectors that fall under the user configured "Availability" range - which are grouped by operation types (system defined) and user defined collector groupsBased on configuration this portlet will display both selected operation types groups and selected user-defined collectors groups

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-10CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: IPM Violation Summary

By default this portlet are in IPM view, however it can be added to any view

Displays the summary count of collectors that have violated configured thresholds.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-11CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: LMS Workflows Demo

By default this portlet is in the Functional view

Click the link

Demo Window

The LMS Workflows Demo portlet displays the most frequently usedworkflows in LMS 3.1You must enable JavaScript in the browser window and install thelatest version of the Flash Player to view the demo

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-12CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: RME Config Protocol Summary

By default this portlet is in RME view, however it can be added to any view

Displays the configuration protocol usage details for successfulconfiguration fetches– Running– Startup– VLAN

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-13CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: Supported Device Finder

By default this portlet is in the System view, however it can be added to the RME view.

Displays the details of supported devices in the following CiscoWorks LMS applications: Resource Manager Essentials, Campus Manger, DeviceFault Manager, and CiscoViewCheck the support of the devices added to the DCR through IP Address, Host Name, Display Name, Model name or SysObjectID of the Device

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-14CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: Supported Device Finder (cont.)

Click OK to raise a request

Default mail client will appear

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-15CiscoWorks LMS 3.1 Tutorial

LMS PortalNew Portlets: User Tacking Summary

By default this portlet is in the CM view, however it can be added to any view

View Screen

Configuration Screen

Display and report the number of Macs which are identified as part of Rogue, New and Dormant Mac in the specified timeDisplays the summary about last User Tracking information such as number of end hosts and active hosts.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-16CiscoWorks LMS 3.1 Tutorial

LMS PortalEnhanced Portlets: N-Hop View

View ScreenConfiguration Screen

Show DFM Alerts added to N-Hop View– Critical– Warning– Informational

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-17CiscoWorks LMS 3.1 Tutorial

LMS PortalEnhanced Portlets: RME Hardware Summary

Click Show Link

Click Hide Link

Show / Hide the RME Hardware Summary Graph

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-18CiscoWorks LMS 3.1 Tutorial

LMS PortalPortal Logging: CS Log Configurations

Enabled portal debugging from Common Services debugging under CS > Server > Admin > CS Log Configurations, without restarting services

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-19CiscoWorks LMS 3.1 Tutorial

LMS PortalPortal Logging: Portal Log Settings

Use the Portal Log Settings portlet to set the log details for the LMS Portal.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-20CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantCiscoWorks Assistant

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-21CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantOverview

What’s New in CiscoWorks AssistantServer Setup Device TroubleshootingEnd host / IP Phone Down

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-22CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantServer Setup: Auto Allocation by Groups

Multi-server support

Auto Allocationby Groups

Navigation path: CWA > Server Setup > Manage Servers > Device Management Mode

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-23CiscoWorks LMS 3.1 Tutorial

Navigation path: CWA > Server Setup > Manage Servers > Allocate Device by Groups

CiscoWorks AssistantServer Setup: Auto Allocation by Groups (cont.)

Applications

Groups

Note: This feature is also available in Common Services.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-24CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantServer Setup: Auto Allocation by Groups (cont.)

Navigation path: CWA > Server Setup > Manage Servers > Auto Allocation Report

Auto Allocation Summary Report

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-25CiscoWorks LMS 3.1 Tutorial

Auto Allocation Final Report

Navigation path: CWA > Server setup > Manage Servers Process

CiscoWorks AssistantServer Setup: Auto Allocation by Groups (cont.)

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-26CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantServer Setup: NGD – Add Discovered Devices to Group

Navigation path: CWA > Server setup > Add Devices > Run Discovery on > Global Settings Tab

Next Generation Discovery (NGD)

Note: This feature is also available in Common Services

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-27CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantServer Setup: NGD – Jump Router Boundaries

Navigation path: CWA > Server setup > Add Devices > Run Discovery on > Seed Devices Tab > CDP

Next Generation Discovery (NGD)

Note: This option is also available in Common Services.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-28CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantServer Setup: NGD – SysObjectID Selector

Navigation path: CWA > Server setup > Add Devices > Run Discovery on > Filter Settings Tab > Choose the SysObjectID from the Device type selector.

Next Generation Discovery (NGD)

Note: This option is also available in Common Services.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-29CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantDevice Troubleshooting: CDA Report – Data Available

CDA In Collapsed Mode

Check Device Attribute (CDA)

Navigation path: CWA > Trouble Shooting workflow

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-30CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantDevice Troubleshooting: CDA Report – No Data

ClickRun now

Check Device Attribute (CDA)

Navigation path: CWA > Trouble Shooting workflow

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-31CiscoWorks LMS 3.1 Tutorial

CiscoWorks AssistantEnd Host / IP Phone Down: Multiple End Hosts Report

Campus End Host report has multiple entry for User Name

End Host report launch for multiple entry

Display the unique field value

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-32CiscoWorks LMS 3.1 Tutorial

Common ServicesCommon Services

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-33CiscoWorks LMS 3.1 Tutorial

What’s New in Common Services?Aggregated Device CenterAudit logDevice Allocation Summary Email SettingsLog files Rotation GUINext Generation Discovery (NGD)

Common ServicesOverview

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-34CiscoWorks LMS 3.1 Tutorial

Common ServicesAggregated Device Centre

Device shown even when not managed by local applications

Application@remoteserver managing this device

Can launch “Credential Verification”on a RME@remoteserver

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-35CiscoWorks LMS 3.1 Tutorial

Common ServicesAudit Log

Previously the ACS mode logged messages in the ACS server onlyThe Non-ACS mode logged messages to the local serverNo provision for viewing both logs simultaneouslyIn this version, the ACS mode logs messages to both serversMessages are displayed from local server regardless of mode chosenNew messages logs which mode the server is inAudit log time format will be “Audit-Log-yyyy-mm-dd.csv “

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-36CiscoWorks LMS 3.1 Tutorial

Common ServicesDevice Allocation Summary

Report shows the server name and count of devices managed by that server.Upon clicking the device count will show the detailed report.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-37CiscoWorks LMS 3.1 Tutorial

Common ServicesEmail Settings

Enable E-mail attachments

Set maximum size of attachment

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-38CiscoWorks LMS 3.1 Tutorial

Common ServicesGUI Log Rotation: Configure Screen

Configure log files to be rotated periodically Optionally archive and compress rotated logsRotate log files only when they have reached a particular size

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-39CiscoWorks LMS 3.1 Tutorial

Common ServicesGUI Log Rotation: Add, Edit, and Schedule

Schedule Logrot

Configure Logrot

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-40CiscoWorks LMS 3.1 Tutorial

Common ServicesNGD: Add Discovered Devices to Specified Group

Note: Also available within Server Setup workflow in CWA

User can specify the group to add the newly discovered devicesSpecified group will be created only under “User Defined Groups” and cannot be created under any subgroup of “User Defined Groups”If existing group is chosen, then the discovered devices will be added to the group

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-41CiscoWorks LMS 3.1 Tutorial

Common ServicesNGD: Enable Discovery Debug using UI

Enable the debugging option for components or modules of Common Services Device Discovery without restarting the services– ARP Module – AUS Module– Cluster Module– Credential Module– CSDiscoveryAdaptor– Data Collector– Discovery DeviceInfo – Discovery Framework – Discovery Util – Neighbor Module – Pingsweep Module – RT Module – RouterPeer Module – System Module

You can only enable or disable debugging options. You cannot choose to set different log level.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-42CiscoWorks LMS 3.1 Tutorial

Common ServicesNGD: Jump Router Boundaries

The Jump Router Boundaries to extend discovery beyond the boundaries set by routers on your network This option is available only for CDP Module

Enable the Jump Router option

Note: Also available within Server Setup workflow in CWA

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-43CiscoWorks LMS 3.1 Tutorial

Common ServicesNGD: Multiple Schedules with Multiple Settings

The discovery can be scheduled with different configurationsUser can edit the discovery job related settings for the individual jobsThe corresponding job related discovery configuration settings can be viewed later for reference

Edit Settings

Only one job can run at a time Schedule times should not overlap Configure device discovery settings before scheduling a discovery job

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-44CiscoWorks LMS 3.1 Tutorial

Common ServicesNGD: SysObjectID Selector in Filter Settings

User can select the SysObjectID from the Device Type selector

Note: Also available within Server Setup workflow in CWA

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-45CiscoWorks LMS 3.1 Tutorial

Campus ManagerCampus Manager

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-46CiscoWorks LMS 3.1 Tutorial

What’s New in Campus Manager?Auto Allocation by GroupsBest Practices and DeviationCross Launch PointsMAC Notification Topology IntegrationVSS Device Support

Campus ManagerOverview

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-47CiscoWorks LMS 3.1 Tutorial

Campus ManagerAuto Allocation by Groups

Enable Auto Mode– Manage All Devices– Manage By Groups

Existing/New device count based on this

matching policy

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-48CiscoWorks LMS 3.1 Tutorial

Campus ManagerAuto Allocation by Groups (cont.)

New Device ListDevices Marked for Deletion

Run Data Collection immediately after applying the settings

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-49CiscoWorks LMS 3.1 Tutorial

Campus ManagerBest Practices and Deviation

Campus Manager 5.1 provides fixes for: – Channel port in auto mode– Non-channel port in desirable mode– Trunk ports in auto mode– Non-trunk ports in desirable mode

DRIP Enabled VLAN discrepancy has been removed

Fix

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-50CiscoWorks LMS 3.1 Tutorial

Campus ManagerCross Launch Points: Topology View

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-51CiscoWorks LMS 3.1 Tutorial

Campus ManagerCross Launch Points: N-Hop View

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-52CiscoWorks LMS 3.1 Tutorial

Campus ManagerCross Launch Points: Summary View

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-53CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Configuring MAC Detection

Enabling Detection and E- Mail Ids for Notification.Navigation Path: Campus UT > Administration > Acquisition > Acquisition Settings.

Launch theDefine Rogue MACs configuration screen

EnablingNew MAC detection

Enabling Rogue MAC

detection

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-54CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Configuring MAC Detection (cont.)

Rogue MAC/OUI List

Launch theAdd MAC/OUI screen

Consider unidentified MAC as Rogue

Acceptable MAC/OUI List

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-55CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Configuring MAC Detection (cont.)

OUI will be taken from OUI.properties under NMSROOT/campus/etc/cwsi/If users needs more OUI, they can update the OUI.properties.

Add toRogue MAC List

Add toAcceptable MAC List

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-56CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Rogue MAC Mail Attachment

Rogue MAC Notification will be sent immediately once the MAC is detected as rogue.

New MAC Notification will be sent every 15 minutes if there are new MACs detected.New MAC poller is running which will collect the MACs which are inserted newly in the last 15 minutes in to NewMAC table.

Rogue MAC Report

New MAC Report

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-57CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Generating MAC Reports

Navigation Path: Campus UT > Administration > Reports > Report Generator

MAC ReportsDormant MACNew MACRogue MAC

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-58CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Generating MAC Reports (cont.)

Rogue MAC Report

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-59CiscoWorks LMS 3.1 Tutorial

Campus ManagerMAC Notification: Generating MAC Reports (cont.)

Dormant MAC Report

New MAC Report

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-60CiscoWorks LMS 3.1 Tutorial

When Campus Manager is integrated with a Cisco Secure Access Control Server (ACS), you can set Topology Maps to display only the devices you are authorized to view

Display only Authorized devices in Topology maps

Campus ManagerTopology Integration: Access Control Server

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-61CiscoWorks LMS 3.1 Tutorial

Campus ManagerTopology Integration: Access Control Server (cont.)

Lock icon at the bottom of the page indicates that it

is ACS mode.

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-62CiscoWorks LMS 3.1 Tutorial

Lock icon at the bottom of the N-Hop portlet indicates

that it is ACS mode.

Campus ManagerTopology Integration: Access Control Sever (cont.)

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-63CiscoWorks LMS 3.1 Tutorial

Campus ManagerTopology Integration: Device Fault Manager Alerts

Bullet– Bullet

Detected Device Fault Manager Servers

Enable / DisablePoll DFM Server for alerts

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-64CiscoWorks LMS 3.1 Tutorial

Campus ManagerTopology Integration: Device Fault Manager Alerts (cont.)

Show Device Fault Manager Alerts in Campus Topology and N-Hop View You select the kind of alerts that should be shown – [ All / Critical / Warning / Informational ]

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-65CiscoWorks LMS 3.1 Tutorial

Campus ManagerTopology Integration: Device Fault Manager Alerts (cont.)

Indicates device has a severe alert

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-66CiscoWorks LMS 3.1 Tutorial

Campus ManagerTopology Integration: Device Fault Manager Alerts (cont.)

You can modify the type of Device Fault Manager alerts shown in N-Hop View– [ All / Critical / Warning / Informational ]

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-67CiscoWorks LMS 3.1 Tutorial

Campus ManagerTopology Integration: Device Fault Manager Alerts (cont.)

Indicates device has a severe alert

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-68CiscoWorks LMS 3.1 Tutorial

Campus ManagerVirtual Switching System Device Support

Note: Only VSS-capable standalone Cisco Catalyst 6000 switches can be

converted into a Virtual Switching System

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-69CiscoWorks LMS 3.1 Tutorial

Campus ManagerVirtual Switching System Device Support (cont.)

VSS ICON

VSS Device Type Filter

VSS ICON

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-70CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsResource Manager Essentials

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-71CiscoWorks LMS 3.1 Tutorial

What’s New in Resource Manager Essentials?

Auto Allocation by GroupsBaseline TemplatesCheck Device Attributes Config Protocol SummaryCustom Inventory Report Embedded Event ManagerExternal FTP SupportGeneric On-Line DiagnosticsJob Based Email AttachmentJob Date Range PSIRT/EOS/EOL Offline ReportSmart Call Home

Resource Manager EssentialsOverview

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-72CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsAuto Allocation by Groups

Existing/New device count based on this

matching policy

Navigation path: RME > Admin > Device Mgmt > Device Management Settings

Enable Auto Mode– Manage All Devices– Manage By Groups

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-73CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsAuto Allocation by Groups (cont.)

Devices not matching the group criteria but still managed by

Resource Manager Essentials

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-74CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsBaseline Templates

Compare a set of standardized policy based commands to a group of devices Moved to separate submenu under:– RME > Config Mgmt > Compliance Mgmt

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-75CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsBaseline Templates (cont.)

Previous Basic mode Baseline Template was too simpleYou could only run a compliance check for given CLI commandsBasic UI has been modified with more functionality and more intuitiveness

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-76CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsBaseline Templates (cont.)

Conditional Block: Enter conditional commandsCompliance Block: Enter compliance commands– Basic mode – Can be used with Conditional Block

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-77CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsCheck Device Attributes

Verify Device Credentials on Editing

Device credentials

Navigation path: RME > Admin > Device Mgmt > Device Management Settings

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-78CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsConfig Protocol Summary

Navigation path: RME > Config Mgmt> Archive Mgmt > Config Fetch Protocol Usage

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-79CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsCustom Inventory Reports

Navigation path: RME > Reports > Custom Report Templates

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-80CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsCustom Inventory Reports (cont.)

New Inventory Groups

Inventory Groups

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-81CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsCustom Inventory Reports (cont.)

New Attributes in Groups

Attributes

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-82CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsEmbedded Event Manager: NetConfig

EEM Environmental VariablesEmbedded Event Manager

New Tasks for EEM

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-83CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsEmbedded Event Manager: NetConfig (cont.)

Environmental Variable Task

Add Instance

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-84CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsEmbedded Event Manager: NetConfig (cont.)

Embedded Event Manager Task

Add Instance

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-85CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsEmbedded Event Manager: NetShow

EEMCommand Set

Command Set - Show Embedded Event Manager Info

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-86CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsEmbedded Event Manager: Syslog

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-87CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsExternal FTP Support

You have to give FTP credentials and

Image Location

Navigation path: RME > Software Mgmt >Software DistributionUse remote staging > Go > Using External FTP Server

You can perform remote staging using external FTP Server only for NAM and WLSE devices

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-88CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsGeneric On-Line Diagnostics: NetConfig

Gold Boot LevelGold Monitoring Test

New Tasks for GOLD

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-89CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsGeneric On-Line Diagnostics: NetConfig (cont.)

Gold Boot Level

Add Instance

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-90CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsGeneric On-Line Diagnostics: NetConfig (cont.)

Gold Monitoring Test

Add Instance

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-91CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsGeneric On-Line Diagnostics: NetShow

Command Set - Show GOLD Test results

GOLDCommand Set

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-92CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsGeneric On-Line Diagnostics: Syslog

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-93CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsJob Based E-mail Attachment

PDFCSV

Supported Modules:Inventory reportsSyslog reportsBaseline compliance check jobsCDA

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-94CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsJob Date Range

New optionfor selecting

last ‘x duration’

Reports Affected:Audit Trail Standard ReportChange Audit Standard Report All Syslog Reports

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-95CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsPSIRT/EOS/EOL Offline Report

SelectLocal option

CCOLocal

Use local XML data file downloaded from an external server for the PSIRT/EOS/EOL reports

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-96CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsPSIRT/EOS/EOL Offline Report (cont.)

User login disabled when Local option is enabled

Before running the reportsDownload XML data fileCopy file to LMS server

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-97CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsPSIRT/EOS/EOL Offline Report (cont.)

Report generated from CCO

Report generated from Local

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-98CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsSmart Call Home: NetConfig

Smart Call Home Task

New Task for Smart Call Home

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-99CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsSmart Call Home: NetConfig (cont.)

Add Instance

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-100CiscoWorks LMS 3.1 Tutorial

Resource Manager EssentialsSmart Call Home: NetShow

Show Call Home InfoCommand Set

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-101CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorInternetwork Performance Monitor

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-102CiscoWorks LMS 3.1 Tutorial

What’s New in Internetwork Performance Monitor?10K Collectors SupportAuto Allocation by GroupsImport Collector from DeviceIP SLA sub-millisecond accuracyMetro Ethernet supportReaction-Configurations

Internetwork Performance MonitorOverview

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-103CiscoWorks LMS 3.1 Tutorial

Internetwork Performance Monitor10K Collector Support

Internetwork Performance Monitor now supports 10000 collectors. This is based on the license of LMS you have opted for.The license limit applies only to Historical Collectors.You can create a max of 5000 Historical collectorsReal-time Collectors are not considered for collector license. You can create Real-time Collectors even if the licensed limit for Historical Collectors has been exceeded

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-104CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorAuto Allocation by Groups

If “Auto Mode” is enabled, the options are “Manage All Devices” or

“Manage by Groups”

Existing/New device count based on this

matching policy

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-105CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorAuto Allocation by Groups (cont.)

Devices not matching the group criteria but still

managed by Internetwork Performance Monitor

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-106CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorImport Collector from Device

Command : ipm importcollectorSyntax Description:

ipm importcollector -u userid -p password [-m email] {-file filename| -source (sourceDisplayNames|all) [-oper (operationNames|all)] } [-input argumentFile]

Where:– source: Specify the source devices display

name separated by comma– oper: Specify the operation names separated by

comma

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-107CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorIP SLA Sub-Millisecond Accuracy

Precision levels

Internetwork Performance Monitor now supports jitter statistics collection at microseconds level

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-108CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorIP SLA Sub-Millisecond Accuracy (cont.)

Jitter report with Microseconds [µs]

Jitter report with Milliseconds [ms]

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-109CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorMetro Ethernet Support

Metro Ethernet operations

EthernetPing EthernetPingAutoIPSLAEthernetJitterEthernetJitterAutoIPSLA

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-110CiscoWorks LMS 3.1 Tutorial

Specific Settings to be configured :– Destination MEP Identification Number– Name of Maintenance domain – VLAN ID

Internetwork Performance MonitorMetro Ethernet Support: EthernetPing

EthernetPing

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-111CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorMetro Ethernet Support: EthernetPingAutoIPSLA

Specific Settings to be configured :– Name of Maintenance domain – VLAN ID – Schedule period– Exclude MPID

EthernetPingAutoIPSLA

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-112CiscoWorks LMS 3.1 Tutorial

Specific Settings to be configured :– Destination MEP Identification Numbers (MPIDs)– Name of Maintenance Domain – VLAN ID

Internetwork Performance MonitorMetro Ethernet Support: EthernetJitter

EthernetJitter

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-113CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorMetro Ethernet Support: EthernetJitterAutoIPSLA

Specific Settings to be configured :– Name of Maintenance domain – VLAN ID – Schedule period– Exclude MPID

EthernetJitterAutoIPSLA

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-114CiscoWorks LMS 3.1 Tutorial

Internetwork Performance MonitorReaction Configurations

Selected Reactions

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-115CiscoWorks LMS 3.1 Tutorial

Device Fault ManagerDevice Fault Manager

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-116CiscoWorks LMS 3.1 Tutorial

What’s New in Device Fault Manager?Auto Allocation by GroupClearing/Acknowledging Multiple AlertsSupport for RTTMon and L2TPv3 MIB Traps

Device Fault ManagerOverview

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-117CiscoWorks LMS 3.1 Tutorial

Device Fault ManagerAuto Allocation by Groups

Old GUI New GUI

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-118CiscoWorks LMS 3.1 Tutorial

Device Fault ManagerClearing/Acknowledging Multiple Alerts

Clear Acknowledge

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-119CiscoWorks LMS 3.1 Tutorial

Device Fault ManagerSupport for RTTMon and L2TPv3 MIB TrapsSupport has been added for the following MIBs:

RTTMON traps – rttMonConnectionChangeNotification– rttMonTimeoutNotification– rttMonThresholdNotification

L2TpV3 Trap– cvpdnNotifSession

© 2008 Cisco Systems, Inc. All rights reserved. New Features 1-120CiscoWorks LMS 3.1 Tutorial

CiscoViewCiscoView

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-121CiscoWorks LMS 3.1 Tutorial

What’s New in CiscoView?CV-CM Cross LaunchCV- HUM Multi Interface Launch– Note: Health and Utilization Monitor (HUM) is an

optional add on application for CiscoWorks LMS 3.1

CiscoViewOverview

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-122CiscoWorks LMS 3.1 Tutorial

CiscoViewCross Launch Campus Manager Reports

Campus ManagerCM Device ReportCM Port ReportCM VLAN Report

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-123CiscoWorks LMS 3.1 Tutorial

CiscoViewCross Launch HUM Interface Report

HUM Interface Reportlaunch point for multiple interfaces

© 2008 Cisco Systems, Inc. All rights reserved. New Features 2-124CiscoWorks LMS 3.1 Tutorial