Post on 12-Oct-2015
PRODUCT CATALOGUE 2013
W E L D I N G A U T O M AT I O N & M AT E R I A L H A N D L I N G E Q U I P M E N T
R E N TA L N E W U S E D C U S T O M I Z E D
L J w e l d i n g . c o m
2 P R O D U C T C A T A L O G U E 2 0 1 3
ABOUT US
LJ Welding Automation specializes in the engineering
and manufacturing of positioning, welding
automation, material handling and custom equipment.
LJ services and supports customers in diverse
industries including oil & gas, pipelines, mechanical
contractors, mining, wind power and more, with
installations in over 35 countries around the world.
ENGINEERING
3D CAD software (Solidworks) is utilized by LJs
engineering team for all detailed design. Customers
have input from concept through to final shop drawings,
which ensures that the customer receives quality
engineering design with input all the way through the
design process. LJ is an APEGA-licensed company.
P R O D U C T C A T A L O G U E 2 0 1 3
ISO 9001:2008 Certified
MANUFACTURING FACILITY
LJ operates out of a company owned, 25,000 square
foot facility on 2.3 acres of land. Our ISO 9001:2008
certified manufacturing facility is fully equipped with
cutting edge manufacturing equipment, including
Panasonic robotic welding and CNC machining centers.
Thousands of installations in over 35 countries and 6 continents.
Visit www.LJwelding.com for more information!
4747 76th Ave
Edmonton, Alberta
Canada T6B 0A3
Contact information:
Ph: +1 (780) 466-6658
Fax: +1 (780) 469-6710
info@LJwelding.com
www.LJwelding.com
3w w w . L J w e l d i n g . c o m
Welding Positioners ........................................................................................................... 4Gear Tilt Positioners ..................................................................................................... 4Pipe Turning Positioners .............................................................................................. 5Powered Height, Tilt & Rotate Positioners .................................................................... 6Powered Headstock/Tailstock Positioners ..................................................................... 6Portable & Benchtop Positioners ................................................................................. 7
Turntables ........................................................................................................................... 8Low Profile Turntables ................................................................................................. 8High Speed/Thermal Spray Turntables .......................................................................... 9
Turning Rolls .................................................................................................................... 10Tank Fit Up Rolls ........................................................................................................ 10Vessel Turning Rolls Lead Screw, Driveshaft Free Dual Drive ................................... 11Vessel Turning Rolls Height Adjustable .................................................................... 12Fixed Height Turning Rolls .......................................................................................... 13Pipe Alignment Rolls .................................................................................................. 14Pipe Double-Jointing: Faster, Safer, Easier! ................................................................. 15Pipe Rolls Height Adjustable ................................................................................... 16Pipe Rolls Height Adjustable & Benchtop ................................................................ 17
Manipulators ................................................................................................................... 18Boom & Column Manipulators ................................................................................... 18
Pipe Stands ....................................................................................................................... 19Modular Roller Support Stands .................................................................................. 19Specialty Welding Stand Options ................................................................................ 20
Beam Clamp Rigging Rollers .......................................................................................... 21
Pipeline Roller Equipment .............................................................................................. 22
Custom Pipe Handling Systems ...................................................................................... 23Custom Hose Handling System .................................................................................. 23Custom Lathe Support Rollers .................................................................................... 23Pipe Handling/Shuttle Systems ................................................................................... 23
Automation & Controls ................................................................................................... 24Controls Panels ........................................................................................................... 24Foot Switches ............................................................................................................. 24Hand Pendants ........................................................................................................... 24Automation Capabilities ............................................................................................. 24
Cable Reel Rollers ........................................................................................................... 25
Accessories ...................................................................................................................... 26Grippers & Chucks ..................................................................................................... 26Elbow Jigs ................................................................................................................. 26Adjustable Pipe Counterweights ................................................................................ 26
Custom .............................................................................................................................. 27Custom Design & Fabrication: To Suit Your Application! ............................................. 27
Table of Contents
Gear Tilt PositionersGear tilt positioners are used for powered, variable speed tilting and rotation to automate and increase welding productivity of cumbersome, heavy work pieces.
SPECIFICATIONS 1 PT 3,000 lb 1PT-300 2 PT 6,000 lb 2PT-300 3 PT 12,000 lb 3PT-200Load Capacity: 3,2001,489 lbs
(018 from Mounting Plate)6,0003,404 lbs (018 from Mounting Plate)
12,0007,576 lbs(018 from Mounting Plate)
Shipping Dimensions: 64 x 48 x 35 64 x 59 x 35 75 x 90 x 52
Tilting Torque: 35,000 in-lbs 80,000 in-lbs 200,000 in-lbs
Tilting Speed: 0.10.9 RPM (135 in 25 seconds) 0.10.9 RPM (135 in 25 seconds) 0.050.35 RPM (135 in 64 seconds)
Height Adjustability: 2949 centre height adjustment in 5 increments 3555 turntable working heights in 5 increments (Taller Height Range Available*)
3050 centre height adjustment in 5 increments3555 turntable working heights in 5 increments(Taller Height Range Available*)
43 67 centre height adjustment in 6 increments5276 turntable working heights in 6 increments(Taller Height Range Available*)
Power Requirements: 110 V, 1-ph 208 V, 3-ph 480 V, 3-ph
Rotation Speed: 0.12.2 RPM (Other speed options available)
0.12.2 RPM (Other options available)
0.12.2 RPM (Other speed options available)
Turning Torque: 20,000 in-lbs 40,000 in-lbs 120,000 in-lbs
Ground Capacity: 800 Amps 800 Amps 800 Amps
Equipment Mass: 2,750 lbs (excluding gripper) 3,750 lbs (excluding gripper) 9,550 lbs (excluding gripper)
Specifications subject to change; consult factory for all specifications.
Available Accessories & Options Input Power Options: 110600 V, 50 or 60 Hz
Touch Screen: for precise speed control and readout
Hand Pendants: with or without (standard) digital readout
Foot Switch: forward/reverse
Custom Height Range
Ground Capacity: up to 2500 Amp available
Chucks or Grippers up to 60
Elbow Jigs and outboard roller support stands available
Larger Capacity Models Available
Fully Integrated Robotic Welding Cells
Now Available
4 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Welding Positioners
Ideal for positioning of heavy wall, large diameter pipe for pipe spooling applications with large offset loads. Large height adjustability accommodates a wide range of swing diameters.
Pipe Turning Positioners
Available Accessories & Options Input Power Options: 110600 V, 50 or 60 Hz
Touch Screen: for precise speed control and readout
Hand Pendants: with or without (standard) digital readout
Foot Switch: forward/reverse
Custom Height Range or powered height adjustability
Ground Capacity: up to 2500 Amp available
Chucks or Grippers up to 60
Elbow Jigs and outboard roller support stands available
SPECIFICATIONS 16P Pipe Turning Positioner 16P-700
30P Pipe Turning Positioner 30P-200
45P Pipe Turning Positioner 45P-500
60P Pipe Turning Positioner 60P-100
Load Capacity: 3,000 lbs (at Mounting Plate) 5,400 lbs (at Mounting Plate) 10,000 lbs (at Mounting Plate) 20,000 lbs (at Mounting Plate)
Shipping Dimensions: 72 x 42 x 77 72 x 42 x 77 86 x 72 x 111 98 x 85 x 106
Turning Torque: 20,000 in-lbs (With Counterweight) 40,000 in-lbs 120,000 in-lbs 240,000 in-lbs
Height Adjustability: 3369 in 4 increments (No Counter Weight)4569 in 4 increments (With Counterweight)
3369 in 4 increments 4296 in 6 increments 4896 in 6 increments
Power Requirements: 110 V, 1-ph 240 V, 1-ph or 208 V, 3-ph 208 V, 3-ph 480 V, 3-ph
Rotation Speed: 0.33.0 RPM 0.22.4 RPM 0.11.5 RPM 0.11.2 RPM
Ground Capacity: 400 Amps 800 Amps 800 Amps 1500 Amps
Equipment Mass: 1,820 lbs (excluding gripper) 2,300 lbs (excluding gripper) 5,000 lbs (excluding gripper) 8,600 lbs (excluding gripper)
Specifications subject to change; consult factory for all specifications.
5P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Welding Positioners
SPECIFICATIONS 30PH Powered Height Headstock 30PH-100
45PH Powered Height Headstock 45PH-100
60PH Powered Height Headstock 60PH-100
Load Capacity: 5,000 lbs (at Mounting Plate) 10,000 lbs (at Mounting Plate) 20,000 lbs (at Mounting Plate)
Turning Torque: 40,000 in-lbs 120,000 in-lbs 240,000 in-lbs
Power Requirements: 480 V, 3-ph 480 V, 3-ph 480 V, 3-ph
Rotation Speed: 0.22.4 RPM 0.11.5 RPM 0.11.2 RPM
Height Adjustability: Fully powered, infinitely adjustable Fully powered, infinitely adjustable Fully powered, infinitely adjustable
Ground Capacity: 800 Amps 800 Amps 800 Amps
Specifications subject to change; consult factory for all specifications. All other specifications to be confirmed with LJ Engineering.
SPECIFICATIONS 1HT Hydraulic Tilt Positioner 1HT-100
Load Capacity: 6,000 lbs
Shipping Dimensions: 112 x 52.5 x 29
Turning Torque: 40,000 in-lbs
Power Requirements: 208 V, 3-ph
Rotation Speed: 0.22 RPM
Height Adjustability: 2366 (hydraulically actuated height adjustability)
Range of Operation: 0135
Ground Capacity: 800 Amps
Equipment Mass: 4,650 lbs
Specifications subject to change; consult factory for all specifications. All other specifications to be confirmed with LJ Engineering.
Powered Headstock/TailstockPositioners
Powered Height, Tilt & Rotate Positioners
Matching Tailstocks Available
Available in Any Capacity, Consult Factory for Details
6 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Welding Positioners
Portable & Benchtop Positioners
SPECIFICATIONS 8 Bench Top Positioner 08P-200 12 Portable Floor Model 12P-900Load Capacity: 300 lbs (at Chuck Face) 1,000 lbs (at Chuck Face)
Shipping Dimensions: 14 x 17 x 20 (15 horizontal height to center of gripper) 22 x 23 x 25 (18 to chuck center line)
Power Requirements: 110 V, 1-ph 110 V, 1-ph
Rotation Speed: 0.77 RPM 0.55 RPM
Turning Torque: 730 in-lbs 3,000 in-lbs
Table: 12 OD oversized Turntable compatible with 8 chuck or welding gripper
12 OD Turntable compatible with 12 chuck or welding gripper
Ground Capacity: 200 Amps 800 Amps
Thru-Bore: hollow spindle c/w air purge fitting hollow spindle c/w air purge fitting
Range of Operation: Manually adjustable with handle -15105 in 15 increments
Hand crank self locking worm gear tilt feature -5100 range c/w angle gauge
Equipment Mass: Positioner: 110 lbs, Chuck 39 lbs Positioner: 280 lbs, Chuck 110 lbs
Specifications subject to change; consult factory for all specifications.
*Positioner must always be mounted to a suitable base.
Ideal for use in lighter duty applications; LJ bench top positioners are available with a variety of features such as: air purge fitting for stainless steel or TIG welding applications, hollow spindle, height adjustable roller cart and torch mount options.
Available Accessories & Options Input Power Options: 110380 V, 50 or 60 Hz
Digital Readout functionality available
Foot Switch: forward/reverse
Chucks: 8 or 12 optional
Elbow Jigs and outboard roller support stands available
Portable scissor lift cart
Optional anti-tip feet
Heavy Duty Portable Scissor Lift Cart 12LT-200Capacity: 1,600 lbs
Height Range: 2642
Roller Base: Swivel lock urethane casters
Key Features: Tilt, Height Adjustable,
Portable!
7P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Welding Positioners
Low Profile Turntables
SPECIFICATIONS 2-Ton Low Profile TRN2-200
10-Ton Low Profile TRN10-200
20-Ton Low Profile TRN20-200
30-Ton Low Profile TRN30-200
Load Capacity: 4000 lbs (Up to 8 Eccentricity) 20,000 lbs (Up to 6 Eccentricity) 40,000 lbs (Up to 6 Eccentricity) 60,000 lbs (Centered Load)
Shipping Dimensions: 33 x 25 x 12 48 x 41 x 16 48 x 41 x 16 48 x 41 x 16
Table Size/Span: 30 diameter 48 diameter 48 diameter 60 diameter
Power Requirements: 110 V, 1-ph 110 V, 1-ph 110 V, 1-ph 208 V, 3-ph
Rotation Speed: 0.11.5 RPM(Optional DC Stepper Motor for precise turning)
0.33.3 RPM(Optional DC Stepper Motor for precise turning)
0.33.3 RPM(Optional DC Stepper Motor for precise turning)
0.22.0 RPM(Optional DC Stepper Motor for precise turning)
Ground Capacity: 400 Amps 800 Amps 800 Amps 800 Amps
Equipment Mass: 450 lbs 1,350 lbs 1,500 lbs 1,850 lbs
Specifications subject to change; consult factory for all specifications.
Low profile turntables are used for precise positioning in the flat or horizontal position. LJs ultra-low profile turntables are the lowest profile turntables available on the market. Available in any table size or capacity.
Only 16 Total Height
Low Profile Turntables
Available Accessories & Options Input Power Options: 110600 V, 50 or 60 Hz
Touch Screen: for precise speed control and readout
Hand Pendants: with or without (standard) digital readout
Foot Switch: forward/reverse
Ground Capacity: up to 2500 Amp available
Custom Turntables Table size up to 16 ft diameter any style Capacity up to 100 tons Any speed range or precision
8 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Turntables
LJ manufactures a range of high speed turntables designed specifically for the thermal spray and painting industries. Turntables up to 100 RPM and anywhere from 300 lbs to 20,000+ capacity are available for any thermal spray rotation application. Customization available for any thermal spray application.
SPECIFICATIONS 100 RPM x 300 lb High Speed Turntable TRNB15-200
60 RPM x 10-Ton High Speed Turntable TRN-500
Load Capacity: 300 lbs (Centered Mass Only) 20,000 lbs (Centered Mass Only)
Shipping Dimensions: 17 x 15 x 7 48 x 42 x 23
Table Size/Span: 15 diameter 48 diameter
Power Requirements: 110 V, 1-ph 208 V, 3-ph
Rotation Speed: 10100 RPM 060 RPM
Max Accel. to Set Speed: 3 seconds 3 seconds
Equipment Mass: 70 lbs 1,750 lbs
Specifications subject to change; consult factory for all specifications.
High Speed/Thermal Spray Turntables
High Speed/Thermal Spray Turntables
Available Accessories & Options Input Power Options: 110600 V, 50 or 60 Hz
Touch Screen: for precise speed control and readout
Hand Pendants: with or without (standard) digital readout
Foot Switch: forward/reverse
Caster Wheel Packages (as shown)
9P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Turntables
Tank Fit Up RollsFor fitting range of length and diameter tanks or thin walled vessels. Modular design allows user to add sections for longer tank. Tube rolls allow support along entire length of concentric tanks or vessels, for applications where regular turning rolls are not adequate and extra vessel support is required.
SPECIFICATIONS Modular Tank Fit-Up Roll (Floor Mount) ALG-200
Modular Tank Fit-Up Rolls (Track Mount) ALG-500
Modular Tank Fit-Up Rolls ALG-816
Load Capacity:Load per Section:
1030-ton10-ton per 10-foot section
1030-ton10-ton per 10-foot section
1030-ton5-ton per 8-foot section
Diameter Range: 36144 OD (3 Settings) 12192 OD (Multiple settings on roller track)
4 ft16 ft
Drive System: Dual Drive, Drive-Shaft Free Style Dual Drive, Drive-Shaft Free Style Dual Drive, Drive-Shaft Free Style
Tractive Effort: 5,000 lbs 6,500 lbs 4,800 lbs
Shipping Dimensions: 92" x 15 " Height, Modular Length 92 x 15 Height, Modular Length Consult Factory (varies)
Power Requirements: 480 V, 3-ph 480 V, 3-ph To customer specifications
Rotation Speed: 6.767 in/min 050 in/min (full torque) up to 100 in/min (half torque)
5100 in/min
Equipment Mass: 5,400 lbs 9,000 lbs Consult Factory (varies)
5-ton capacity model available for lighter duty applications. Contact LJ for more information.
Specifications subject to change; consult factory for all specifications.
Drive-Shaft Free, Dual Drive
Available Accessories & Options Control pendant with on/off, variable speed, bidirectional control
Dual drive for maximum rotation control
Modular construction allows for multiple lengths to be added for longer vessels
Hydraulic alignment jacking system to align and pull vessel sections together
ALG-816 shown
Master control station and hand pendant options
Fully Automated Tank Welding Capability
10 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Turning Rolls
SPECIFICATIONS 40-Ton Turning Roll 40T-100/40T-200
80-Ton Turning Roll 80T-100/80T-200
200-Ton Turning Roll200TRV-100/200
Load Capacity (balanced): Driver: 40,000 lbs (20-ton) Idler: 40,000 lbs (20-ton)
Driver: 80,000 lbs (40-ton) Idler: 80,000 lbs (40-ton)
Driver: 200,000 lbs (100-ton) Idler: 200,000 lbs (100-ton)
Diameter Range: 316 3'16' 316
Shipping Dimensions: Idler: Driver:
24 x 126 x 27 (top of wheel) 37 x 139 x 27 (top of wheel)
38 x 150 x 31 (top of wheel) 42 x 174 x 31 (top of wheel)
181 x 70 x 6787 (top of wheel)181 x 70 x 6787 (top of wheel)
Tractive Effort:Output Torque:
Dual Drive 10,000 lbs 80,000 in-lbs
Dual Drive 12,000 lbs 120,000 in-lbs
Dual Drive 44,000 lbs 480,000 in-lbs
Power Requirements: 208 V, 3-ph 208 V, 3-ph 480 V, 3-ph
Rotation Speed: 550 in/min 550 in/min 550 in/min
Equipment Mass: Driver: 2,500 lbsIdler: 1,500 lbs
Driver: 6,000 lbsIdler: 4,600 lbs
Driver: 20,000 lbsIdler: 16,500 lbs
Specifications subject to change; consult factory for all specifications.
Vessel Turning Rolls Lead Screw, Driveshaft Free Dual Drive Used for turning and rolling large vessels, typically in tandem with boom and column manipulators for automation of vessel welding and fabrication. LJ has a range of turning rolls with height adjustability, wheel and track mount bases, as well as optional powered or manual lead screw wheel spacing. Custom hydraulic leveling lift kits are available.
Drive-Shaft Free, Dual Drive
Available Accessories & Options AC dual motor drive for precise speed control from 0100%, digital speed display and drive-shaft free dual drive
Heavy duty urethane covered or solid steel wheels protect and grip work piece; overload or end-step discs available
Optional powered or manual lead screw for quick spacing of wheels
Heavy duty hydraulic lift kits
Input Power Options: 110600 V, 50 or 60 Hz
All LJ turning rolls available with digital speed readout calibrated to inches/min or mm/min for precise welding speed control
11P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Turning Rolls
Vessel Turning Rolls Height AdjustableDual adjustable drive heads designed such that load can always be centered on rolls;urethane wheels to protect and grip workpiece. Standard features include height adjustability for safe and stable clearance of fittings. Wheeled base compatibility for track mount installations.
SPECIFICATIONS 12-Ton Height Adjustable Vessel Roll 06R-100(A)/06R-200
20-Ton Height Adjustable Vessel Roll 10TRV-100/200
40-Ton Height Adjustable Vessel Roll 20TRV-100/200
Load Capacity (balanced): Driver: 12,000 lbs (6-ton) Idler: 12,000 lbs (6-ton)
Driver: 20,000 lbs (10-ton) Idler: 20,000 lbs (10-ton)
Driver: 40,000 lbs (20-ton) Idler: 40,000 lbs (20-ton)
Diameter Range: 0.512 114 114
Shipping Dimensions: 34 x 103 x 26 113 x 44 x 33 116 x 44 x 31
Height Adjustability: 2339 (top of wheel) Adjustable in 3 increments
27"45" (top of wheel) Adjustable in 3" increments
3048 (top of wheel) Adjustable in 3 increments
Tractive Effort:Output Torque:
Single Drive, 3,500 lbs 25,000 in-lbs
Dual Drive, 6,000 lbs 50,000 in-lbs
Dual Drive, 8,700 lbs 80,000 in-lbs
Power Requirements: 110 V, 1-ph 240 V, 1-ph (or 208 V, 3-ph) 208 V, 3-ph
Rotation Speed: 550 in/min 550 in/min 550 in/min
Equipment Mass: Driver: 975 lbsIdler: 670 lbs
Driver: 1,950 lbsIdler: 1,300 lbs
Driver: 2,650 lbsIdler: 1,700 lbs
Specifications subject to change; consult factory for all specifications.
Height Adjustable, Track Mountable
Available Accessories & Options Variable speed, AC drive with hand pendant and foot switch
Modular design accepts either flat feet or flanged casters for mounting to manual or powered track mount systems (as shown on right)
Input Power Options: 110600 V, 50 or 60 Hz
All LJ turning rolls available with digital speed readout calibrated to inches/min or mm/min for precise welding speed control
12 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Turning Rolls
Ideal for use with vessels and large diameter pipe turning; for longer and/or heavier applications additional idlers can be used to increase load capacity as required.
SPECIFICATIONS 12-Ton, 0.512 ft Vessel Roll 12T-000A/12T-100
75-Ton, 318 ft Vessel Roll 75T-100A/75T-200
120-Ton, 318 ft Vessel Roll 120T-100/120T-200
Load Capacity: Driver: 12,000 lbs (6-ton) Idler: 12,000 lbs (6-ton)
Driver: 75,000 lbs (37.5-ton) Idler: 75,000 lbs (37.5-ton)
Driver: 120,000 lbs (60-ton) Idler: 120,000 lbs (60-ton)
Diameter Range: 0.512 (0.515 wide frame available) 318 318
Shipping Dimensions: Idler: Driver:
24 x 78 x 3236 x 78 x 32
24 x 126 x 27 (top of wheel) 37 x 139 x 27 (top of wheel)
126 x 27 x 30 (top of wheel) 150 x 46 x 30 (top of wheel)
Tractive Effort:Output Torque:
Single Drive, 3,500 lbs 25,000 in-lbs
Dual Drive, 8,600 lbs 95,000 in-lbs
Dual Drive, 20,400 lbs 230,000 in-lbs
Power Requirements: 110 V, 1-ph 208 V, 3-ph 480 V, 3-ph
Rotation Speed: 443 in/min 440 in/min 770 in/min
Equipment Mass: Driver: 900 lbsIdler: 650 lbs
Driver: 4,000 lbsIdler: 1,600 lbs
Driver: 5,700 lbsIdler: 3,600 lbs
Specifications subject to change; consult factory for all specifications.
Fixed Height Turning Rolls
Available Accessories & Options Variable speed, AC drive with hand pendant and foot switch
Modular design accepts either flat feet or flanged casters for mounting to manual or powered track mount systems
Input Power Options: 110600 V, 50 or 60 Hz
All LJ turning rolls available with digital speed readout calibrated to inches/min or mm/min for precise welding speed control
13P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Turning Rolls
LJ alignment rolls are designed for specialty applications where pipe or vessels require precise, fast alignment and fine leveling for fit up and welding, and offer compensation for inconsistencies in shop floor or ground. Often used in pipe double-jointing systems for maximum efficiency and safety.
SPECIFICATIONS 12-Ton Pipe Alignment Roll 12S-100/12S-200
Load Capacity(Driver & Idler Set):
Driver: 12,000 lbs (6-ton) Idler: 12,000 lbs (6-ton)
Diameter Range: 648 nominal pipe diameter
Shipping Dimensions: Idler: Driver:
39 x 62 x 27 height (28 top of wheel) 39 x 62 x 27 height (29 top of enclosure)
Tractive Effort:Output Torque:
Single Drive, 3,500 lbs 25,000 in-lbs
Power Requirements: 110 V, 1-ph
Rotation Speed: 550 in/min (applies to driver unit only)
Equipment Mass: Driver: 2,300 lbsIdler: 2,150 lbs
Alignment Style: Powered lead screw with independent spacing control of each wheel
Specifications subject to change; consult factory for all specifications.
SPECIFICATIONS 20-Ton Pipe Alignment Roll 20TSR-100/200
Load Capacity(Driver & Idler Set):
Driver: 20,000 lbs (10-ton) Idler: 20,000 lbs (10-ton)
Diameter Range: 660 nominal pipe diameter
Shipping Dimensions: Idler: Driver:
44 x 82 x 33 height (31 top of wheel)44 x 82 x 33 height (31 top of wheel)
Tractive Effort:Output Torque:
Single Drive, 3,500 lbs 25,000 in-lbs
Power Requirements: 208 V, 3-ph or 480 V, 3-ph
Rotation Speed: 0.990 in/min (applies to driver unit only)
Traverse Speed Range: 0.323 ft/min
Equipment Mass: Driver: 3,100 lbsIdler: 2,900 lbs
Alignment Style: Powered lead screw with independent spacing control of each wheel
Specifications subject to change; consult factory for all specifications.
Pipe Alignment Rolls
Available Accessories & Options Variable speed, AC drive with hand pendant and foot switch
Modular design accepts either flat feet or flanged casters for mounting to manual or powered track mount systems
Input Power Options: 110600 V, 50 or 60 Hz
All LJ turning rolls available with digital speed readout calibrated to inches/min or mm/min for precise welding speed control
14 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Turning Rolls
Full pipe alignmentcontrol allows formaximum productivity and safety through use of simple hand pendant
Joystick controls allow for complete side/side, up/down control over alignment of pipe
Rail-mount base- can be supplied as motorized or non-motorized for driving pipe sections together
Indoor and outdoor compatible models are available.
Pipe Double-Jointing: Faster, Safer, Easier!
Fully Automated Alignment, Rotation, and
Welding Capabilities
Variable speed and bidirectional controls for rotation, alignment, leveling and/or rail mount drive
Ergonomic and easy to hold
Heavy duty joystick controls all left/right, up/down shifting
Optional touchscreen for complete control of all parameters
User enters pipe specifications and system automatically sets to home position
15P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Turning Rolls
Pipe Rolls Height AdjustableLJ pipe rolls are used for pipe welding applications ranging from light tubes to extra-heavy walled pipe. Whatever your pipe rolling application, LJ has the most cost effective and user friendly equipment!
SPECIFICATIONS 8-Ton Track Mount Pipe Train Roll 8TS-100/8TS-200
8-Ton Low Profile Pipe Roll SHD-700A/SHD-750
8-Ton Geared Height Adjust Roll SHD-800A/SHD-850
Load Capacity(Driver & Idler Set):
Driver: 8,000 lbs (4-ton) Idler: 8,000 lbs (4-ton)
Driver: 8,000 lbs (4-ton) Idler: 8,000 lbs (4-ton)
Driver: 8,000 lbs (4-ton) Idler: 8,000 lbs (4-ton)
Diameter Range: 448 248 248
Shipping Dimensions: 67 x 39 x 31 (lowest setting) 50 x 34 x 21 (foot posts) (55 width from outside handles)
36 x 50 x 29
Height Range: 2339 (from track to top of wheel) 1426 (top of wheel) Adjustable in 1 increments
29 x 41 (top of wheel) Manual or Powered geared height adjustable
Tractive Effort:Output Torque:
Dual Drive, 4,800 lbs tractive effort 24,000 in-lbs output torque
Single Drive, 2,400 lbs tractive effort12,000 in-lbs output torque
Single Drive, 2,400 lbs tractive effort 12,000 in-lbs output torque
Power Requirements: 208 V, 3-ph 110 V, 1-ph 110 V, 1-ph
Rotation Speed: 550 in/min 550 in/min 550 in/min
Traverse Speed: 480 ft/min NA NA
Equipment Mass: Driver: 1,400 lbs Idler: 750 lbs
Driver: 411 lbs Idler: 245 lbs
Driver: 540 lbs Idler: 390 lbs
Specifications subject to change; consult factory for all specifications.
8TSJ-100/200: dual drive, powered track mount travel base SHD-800/850: geared height adjust
Available Accessories & Options Variable speed, AC drive with hand pendant and foot switch
Modular design accepts either flat feet or flanged casters for mounting to manual or powered track mount systems
Input Power Options: 110600 V, 50 or 60 Hz
All LJ turning rolls available with digital speed readout calibrated to inches/min or mm/min for precise welding speed control
Available with dual drive rotation, hold down
rollers for extra traction, geared height adjust, and
powered travel base
SHD-700A/750: extra low profile
16 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Turning Rolls
Ideal for supporting and turning heavy wall pipe. Modular design accepts either flat feet, v-track, or roller wheels.
SPECIFICATIONS 1.5-Ton Benchtop Roller BPR-200A/BPR-100
4-Ton Pipe Roller HD2L-100/HD2L-150
Pipe Roller & CartEMCC-100
Load Capacity(Driver & Idler Set):
Driver: 1,500 lbs (0.75-ton)Idler: 1,500 lbs (0.75-ton)
Driver: 4,000 lbs (2-ton)Idler: 4,000 lbs (2-ton)
Driver & Idler Set: 8,000 lbs 8,000 lbs (4-ton)
Diameter Range: 216 236 236
Shipping Dimensions: 26 x 13 x 10 (top of wheel) 30 x 31 x 40 69 116 x 39 x 49
Height Range: Low Profile, Fixed Height 2840 fine adjust 3749
Tractive Effort:Output Torque:
Single Drive, 270 lbs1,300 in-lbs
Single Drive, 650 lbs2,000 in-lbs
Single Drive, 650 lbs 2,000 in-lbs
Power Requirements: 110 V, 1-ph 110 V, 1-ph 110 V, 1-ph
Rotation Speed: 880 in/min 880 in/min 880 in/min
Equipment Mass: Driver: 80 lbsIdler: 45 lbs
Driver: 240 lbsIdler: 150 lbs
Driver & Idler Set: 700 lbs
Specifications subject to change; consult factory for all specifications.
Available Accessories & Options Variable speed, AC drive with hand pendant and foot switch
Modular design accepts either flat feet or flanged casters for mounting to manual or powered track mount systems Input Power Options: 110240 V, 50 or 60 Hz
All LJ turning rolls available with digital speed readout calibrated to inches/min or mm/min for precise welding speed control
Pipe Rolls Height Adjustable & Benchtop
Optional Base for Benchtop Rolls
17P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Turning Rolls
Boom & Column Manipulators
SPECIFICATIONS MNP-500 MN6-100 MN9-300 MN12-200Load Capacity (at boom end): 250 lbs 500 lbs 500 lbs 500 lbs
Boom Stroke: 42 72 108 132
Column Stroke: 58 72 96 144
Boom Traverse Speed Range: 5120 in/min 5120 in/min 5120 in/min 5120 in/min
Mast Traverse Speed Range: 5120 in/min 5120 in/min 5120 in/min 5120 in/min
Travel Car Speed: 5120 in/min 5120 in/min 5120 in/min 5120 in/min
Power Requirements: 480 V, 3-ph 480 V, 3-ph 480 V, 3-ph 480 V, 3-ph
Equipment Mass: 4,400 lbs 7,500 lbs 8,500 lbs 9,000 lbs
Specifications subject to change; consult factory for all specifications.
Available Accessories & Options Joystick and variable speed controls for accurate powered positioning of welding head in all directions
Spring loaded pawl engages column face when chain tension drops below pre-set limit
Manual swivel base
Bolt pattern for fixed floor mount
Momentary rapid traverse
Automatic seam tracking options now available call LJ for more details
LJ engineers and manufactures manipulators with boom stiffness and welding head stability, operator controls, and ease of use as key driving factors. Automatic welding heads are designed to be mounted on a stiff and nearly vibrationless boom, and moved to desired height with powered column. The welding head can then be positioned as required for automated welding of large vessels or other workpieces.
Fully Integrated Touch Screens and Vision Seam Tracking Systems
Now Available
18 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o mSee standard control options on page 24.
Manipulators
19
Modular Roller Support StandsIdeal for use with pipe up to 48 diameter in combination with LJ Welding Positioners or large pipe rolling applications. If extra height range adjustability is required, please ask about our height adjust options!
Available Options Modular design accepts either flat feet, v-track, or roller wheels
Available with custom tops including multidirectional rollers, v-rollers, custom rollers or sawhorse tops
SPECIFICATIONS 4,000 lb Roller Stand (Short) HD2L-200U
4,000 lb Roller Stand (Tall) HD2-300U
8,000 lb Gear Elevated Stand SHD-850
16,000 lb Gear Elevated Stand UHD-200
Load Capacity: 4,000 lbs 4,000 lbs 8,000 lbs 16,000 lbs
Diameter Range: 248 248 448 848 (up to 60 now available)
Height Range: 2436 3963 3042 (Dual screw jack geared height adjust)
3042 (Dual screw jack geared height adjust)
Shipping Dimensions:
30 x 31 x 26 (top of wheel)
34 x 31 x 40 (top of wheel)
36 x 50 x 2941 (top of wheel)
43 x 51 x 2941 (top of wheel)
Weight: 138 lbs 165 lbs 390 lbs 530 lbs
Specifications subject to change; consult factory for all specifications.
Roller Top Options
Base Units
Base Foot Options
Multidirectional Rollers HD2-350
Vee-Rollers HD2-420
Self Leveling Flat Foot (Included)
Rail Mount Caster Kit 4,000 lb: HD2-380
(Larger Capacities Available)
Swivel Caster Kit (Optional Brakes)
4,000 lb: HD2L-230 (Larger Capacities Available)
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m 19P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Pipe Stands
20
Folding & Solid Tripod StandsTripod pipe stands serve a valuable purpose when a lightweight and portable pipe support stand is needed. All LJ tripod stands can be equipped with a v-top support, roller wheels, or multi directional rollers, for any application. All LJ tripods utilize locking through pin and threaded fine height adjust for extra safety.
Solid and Folding Stands: 2,500 lb capacity, low profile, medium and tall ranges available with adjustable height.
Super Duty Tripod Stands: 5,000 lb capacity, low profile, medium and tall ranges available with adjustable height.
Available in any size or height range, contact LJ for more details.
Sawhorse SupportsAvailable in all sizes and capacities from 1000 lb to 100-tonengineered to your specifications.
Spring loaded style.
Fully Engineered.
Specialty Welding Stand Options
SPECIFICATIONS 2-Ton Multi-Directional Roller Head
2-Ton HorizontalV-Roller Head
4-Ton HorizontalV-Roller Head
Load Capacity: 4,000 lbs (2-ton) 4,000 lbs (2-ton) 8,000 lbs (4-ton)
Diameter Range: 248 248 236
Shipping Dimensions: See HD2-300 or HD2L-200 See HD2-300 or HD2L-200 See SHD-750
Weight: See HD2-300 or HD2L-200 See HD2-300 or HD2L-200 See SHD-750
Compatibility: Configurable with HD2-300 and HD2L-200, see base model specification for general height range, footprint and weight
Configurable with HD2-300 and HD2L-200, see base model specification for general height range, footprint and weight
Configurable with SHD-750, see base model specification for general height range, footprint and weight
Specifications subject to change; consult factory for all specifications.
Sawhorses and Tripods
Customized to any application or specification.
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m20 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Pipe Stands
21
SPECIFICATIONS Multi-Directional Pipe Roller MDRN-100
1-Ton Multi-Directional Roller MDR-200
2-Ton Multi-Directional Roller MDR-700
Load Capacity: 2,000 lbs (1-ton) 2,000 lbs (1-ton) 4,000 lbs (2-ton)
Diameter Range: 28 224 OD 436 OD
Equipment Mass: 40 lbs 60 lbs 80 lbs
Shipping Dimensions: 15 x 9 x 5 15 x 22 x 622 base width27 width from outside handles
15 x 25 x 725 base width31 width from outside handles
Beam Clamp Flange Size Range:
612 Flange Widths, up to 1 thick 612 Flange Widths, up to 1 thick 612 Flange Widths, up to 1 thick
Additional Features: Extra small footprint for tight spaces Handles on sides for safe and easy lifting and installation
Handles on sides for safe and easy lifting and installation
Specifications subject to change; consult factory for all specifications.
SPECIFICATIONS 1-Ton Unidirectional Roller HZ6-200
5-Ton Unidirectional Roller HZD-100
10-Ton Unidirectional Roller HZDD48-100
Load Capacity: 2,000 lbs (1-ton) 10,000 lbs (5-ton) 20,000 lbs (10-ton)
Diameter Range: 224 OD 242 OD 2448
Equipment Mass: 94 lbs 95 lbs 225 lbs
Shipping Dimensions: 26 x 15 x 9 26 x 15 x 7 30 width from outside handles
41 x 16 x 11
Beam Clamp Flange Size Range:
612 Flange Widths, up to 1 thick 612 Flange Widths, up to 1 thick 612 Flange Widths, up to 1 thick
Additional Features: Urethane Cones protect pipe surface/coatings and guide pipe, handles on sides for safe and easy lifting and installation
Heavy Duty Rollerssupplied with steel or urethane options, handles on sides for safe and easy lifting and installation
Heavy Duty Rollerssupplied with steel or urethane options, handles on sides for safe and easy lifting and installation
Specifications subject to change; consult factory for all specifications.
Pipe rigging rollers are used for a variety of applications, in particular for installation of pipe into racks at refineries, power plants, and other industrial facilities. All LJ pipe rigging rollers are designed to be lightweight, with beam clamps for quick installation and various roller head options so that pipe can be easily, safely, and efficiently installed.
Beam Clamp Rigging Rollers
Extra small footprint or extra large capacity options are available, contact LJ for details
Small Foot Print Model Now Available
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m 21P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Beam Clamp Rigging Rollers
22
Pipeline rollers are designed to protect, support, and guide a pipeline section during river and road crossings. Pipe guide rollers help minimize drag forces of pipe-pulling through horizontally drilled or bored holes. LJ manufactures conical or conveyor roller style pipe rollers for applications ranging from 2 light walled HDPE piping up to heavy walled 72 steel pipe with capacities ranging from 2,000 to 40,000 lbs or greater.
Pipeline Roller Equipment
SPECIFICATIONS 1-Ton, 224 OD HZ6-300
1-Ton, 232 OD HZ6-100
5-Ton, 448 ODHZM5-100
10-Ton, 448 ODHZM10-100
40-Ton, 472 ODHZM405-100
Load Capacity: 2,000 lbs (1-ton) 2,000 lbs (1-ton) 10,000 lbs (5-ton) 20,000 lbs (10-ton) 80,000 lbs (40-ton)
Diameter Range: 224 232 448 448 472
Shipping Dimensions: 26 x 16 x 8(to top of roller)
18 x 30 x 9 (to top of roller)
50 x 30 x 21(to top of roller)
63 x 34 x 24 (to top of roller)
68 x 56 x 33 (to top of roller)
Equipment Mass: 90 lbs 135 lbs 385 lbs 690 lbs 1725 lbs
Rolling Surface: Conical style, urethane cones protect pipe
Conical style, urethane cones protect pipe
Dual v-roller style, molded urethane, oversized roller bearings
Dual v-roller style, molded urethane, oversized roller bearings, optional horizontal roller for small-diameter pipe
8 roller system, molded urethane oversized roller bearings
Additional Features: Handles for easy lifting and moving on-site
Adjustable roller style Forklift pockets and lift hooks for easy movement on job-site
Forklift pockets and lift hooks for easy movement on job-site
Adjustable rollers, forklift pockets and lift hooks for easy movement on job-site
Specifications subject to change; consult factory for all specifications.
SPECIFICATIONS 30,000 lb100,000 lb Capacity Pipeline Cradles PRC-100 PRC-200 PRC-300 PRC-400
Load Capacity: 30,000 lbs 60,000 lbs 75,000 lbs 100,000 lbs
Diameter Range: 1224 OD 2436 OD 3648 OD 4860 OD
Additional Features: Effective method for supporting and rolling pipe at the entrance of pipeline crossings the cradle safely supports, guides, and protects the pipe
Specifications subject to change; consult factory for all specifications.
LJ Roller Cradles are used as an effective method for supporting and rolling pipe at the entrance of pipeline crossings. The cradle safely supports, guides, and protects the pipe. Various cradle models for pipe from 260 (60.3 mm1524 mm) in diameter.
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m22 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Pipeline Roller Equipment
23
Custom Pipe Handling Systems
SPECIFICATIONS Custom Hose Handling SystemHZH-200
Capacity: 200,000 lbs (100-ton) per set of 10 roller assemblies
Diameter Range (of hose/piping assembly):
442OD
Rollers: Urethane covered steel rollers
Modular and portable design, marine grade components
Specifications subject to change; consult factory for all specifications.
SPECIFICATIONS Custom Lathe Support Rollers QCK-100, QCK-300
Capacity: 40,000 lbs (20-ton) per set of 5 roller assemblies
Diameter range of hose/piping assembly:
QCK-100: 424OD QCK-300: 432OD
Rollers: V-rollers for loading pipe into roller bed
Servo drive lead screw spacing for precise alignment and lifting under full loadHydraulic braking system
Specifications subject to change; consult factory for all specifications.
LJ designs and builds custom pipe handling systems for applications ranging from barge pipe lay to custom lathe support rollers.
Engineering Rendering To Finished Product
Engineering Rendering To Finished Product
SPECIFICATIONS Pipe Handling/Shuttle Systems Any diameter capacity, or speed range
Can be set up for linear travel, rotation, kick off table or any combination of functions
Integration to existing or other systems available
Specifications subject to change; consult factory for all specifications.
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m 23P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Custom Pipe Handling Systems
24
HP-100 Single/Dual Axis Hand Pendants Ergonomic, easy to use,
lightweight design, c/w protective guard
Optional LCD digital speed readout
Heavy rubber 8 m (25 ft) cable with 19-pin metal plugs
Automation & Controls
Remote monitoring capability
HMI/Input to controller
Up to 3-axis positioning of workpiece (tilt, turn, lift)
Up to 3-axis positioning of workpiece + welding head(s)
Automation Capabilities
Full Integration of All Positioning and Welding Equipment
15 m (50 ft) Extension Cables
Available
Controls Panels Input power supply: 110-600
Volts and 50/60 Hz optional Master variable speed,
direction, on/off local/remote controls
Optional LCD digital speed or torque readout
+/-3% standard precision; servo, stepper and/or encoder style options available for higher precision applications
Fully adjustable parameters (speed, acceleration, torque) and communication-ready
FS-FR Forward/Reverse Foot Switch Heavy Duty Cast steel body
with heavy duty guard/handle
Momentary actuation (normally off)
Heavy rubber 8 m (25 ft) cable with 4-pin metal plugs
FS-V Variable Speed Foot Switch Plug & Play with optional
controller upgrade Main panel controls master
speed range, foot switch used for variable speed in master range
Multiple Axis Hand Pendants For multiple-axes control
or complex functions
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m24 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Automation & Controls
25
Cable Reel Rollers are used for rolling large cable spools, for payout, unwinding and take-up of heavy cable. Often used in combination with a tugging or pulling unit, LJ cable reel rollers are equipped with variable speed, bidirectional controls, slip clutches to eliminate over torque and maximize safety, heavy duty rolling components, and easily adjustable diameter range using v-track rollers. LJ engineers and manufactures cable reel rollers to any capacity or specification required.
Cable Reel Rollers
SPECIFICATIONS 1 HP Cable Reel Roller BNT-100
2 HP Cable Reel Roller BNT-200
3 HP Cable Reel Roller CRR-200
Load Capacity: 20,000 lbs (10-ton) 20,000 lbs (10-ton) 30,000 lbs (15-ton)
Spool Size Range: 210 ft diameter 5.5 ft max width
210 ft diameter 5.5 ft max width
312 ft diameter8 ft max width
Tractive Effort/Torque: Single Drive 700 lbs Tractive Effort (1,600 in-lbs output torque)
Single Drive 1,300 lbs Tractive Effort (1,600 in-lbs output torque)
Single Drive 2,500 lbs Tractive Effort (5,000 in-lbs output torque)
Rotation Speed: 42420 in/min 42420 in/min 42425 in/min
Height Range: Low Profile, fine adjust leveling feet optional
Low Profile, fine adjust leveling feet optional
Low Profile, fine adjust leveling feet optional
Power Requirements: 110 V, 1-ph 240 V, 1-ph 240 V, 1-ph
Equipment Mass: 1,885 lbs 1,885 lbs 2,500 lbs
Shipping Dimensions: 103 x 85 x 19 (low profile height) 103 x 85 x 19 (low profile height) 99 x 131 x 22 (low profile height) 108 width with safety catch installed
Brake Torque: 1,700 in-lbs will activate slip clutch to prevent workpiece from being pulled off rollers
3,200 in-lbs will activate slip clutch to prevent workpiece from being pulled off rollers
Adjustable slip clutch from 2,1004,800 in-lbs
Controls: Variable Speed, Forward/Reverse DC Drive, optional foot or hand switches
Variable Speed, Forward/Reverse DC Drive, optional foot or hand switches
Variable Speed, Forward/Reverse DC Drive, optional foot or hand switches, safety catch included
Specifications subject to change; consult factory for all specifications.
Anti-tip bar provides extra stability and safety
Shown with optional leveling feet
See standard control options on page 24.P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m 25P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m See standard control options on page 24.
Cable Reel Rollers
26
Elbow Jigs
Accessories
SPECIFICATIONS Elbow Jigs (230)02E-200 03E-200 04E-200 06E-200 08E-200 10E-200 12E-200 14E-200 16E-200 18E-200 20E-200 24E-200 30E-200
Outside Diameter: 2 OD 3 OD 4 OD 6 OD 8 OD 10 OD 12 OD 14 OD 16 OD 18 OD 20 OD 24 OD 30 OD
Capacity: 250 lbs 250 lbs 250 lbs 250 lbs 500 lbs 500 lbs 500 lbs 500 lbs 1000 lbs 1000 lbs 1000 lbs 1000 lbs 2000 lbs
Additional Features: 90 Elbows: Precision fit and clamp allows for quick and easy fitting, prepping and welding of elbows for use with welding positioners
Grippers & Chucks
3-jaw self centering scroll chucks with reversible top jaws available in 3 sizes: 8, 12, 16 gripping diameter ranges
High-quality, cost-effective welding grippers and chucks are a standard accessory on all welding positioners.
Counterweights help to balance heavy offset loads during rotation.
For oversized or heavy gripping requirements with smooth, serrated or carbide insert top jaws
Adjustable Pipe Counterweights
SPECIFICATIONS Adjustable Pipe Counterweights PPC-200
Description: Pipe Counterweight
Shipping Dimensions: 29 x 16 x 33
Speed Range: 690 lbs
T30-100: 230 gripping diameter range, 5,000 lbs capacity
T50-100: 250 gripping diameter range, 10,000 lbs capacity
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m26 P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Accessories
27
Custom Design & Fabrication: To Suit Your Application!
Used to separate and press together large diameter pipe expansion joints (up to 36 OD), for servicing and accurate length settings, complete with custom jigs for various ASME flange sizes
Designed and built for an application to grind excess overlay weld material from flange face after hard surfacing process. Greatly increased operator safety and reduced grinding time from hours to minutes.
Adjustable Flange Facing Grinder AFG-100Maximum Travel: x = 36, y = 36, z = 8
Grinding Head: 2 width stones, 7.5 HP dual head grinder c/w safety covers
Additional Features: Automated oscillation for even wearing of grinding stones, vibration-reducing leveling feet, forklift pockets and lifting eye, dust collection ports with optional dust collector, CSA approved
Barrel Extractor SUN-200Maximum Travel: 96 per side
Maximum Push Force: 32,000 lbs (16-ton)
Maximum Pull Force: 100,000 lbs (50-ton)
Controls/Interface: HMI touch screen for precise pressing and pulling functions down to the millimeter
Hydrotesting upgrades available
Nozzle Extractor SYNNR-100-4Capacity: 6,000 lbs (3-ton)
Diameter Range: 016
Height Range: 18
Horizontal Range: 16 Axial Adjust
Turning Torque: 20006000 ft-lbs
Power Requirements: Pneumatic
P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m 27P R O D U C T C ATA L O G U E 2 0 1 3 | w w w. L J w e l d i n g . c o m
Custom
www.LJwelding.com
Ph: +1 (780) 466-6658
Fax: +1 (780) 469-6710
4747 76th Ave, Edmonton, Alberta, Canada T6B 0A3
ISO 9001:2008 Certified