Post on 11-Oct-2020
(800) 679-9243ZLED-LIGHTING.COM
2018LED RETROFIT
SOLUTIONS
TABLE OF CONTENTS
Letter From The President . . . . . 1
About ZLedLighting . . 2
How Does LED Work? . 3
Lighting Comparison . 4
Retrofit Opportunities . 5
Choosing A Retrofit Product 6
Comcast - A Case Study . . 7
Building Z - An ROI Estimation 8
LED Small Corn Lamps 9-11
LED HE Large Corn Lamps . . . 12-13
LED Corn Paddle Lamps 14-15
LED Enclosed Corn Lamps . . 16-17
LED Pyramid Corn Lamps 18-19
LED Post Top Lamps 20-21
LED Stubby Corn Lamps . 22
Corn Lamp Base Converters 23
PL and CFL Lamps . . . . . 24-25
HIDR Kits . . . . . . . 26-27
Recessed Downlights 28-29
Magnilumen - Magnetic Retrofit Kit 30-33
Notes
Version 1.09.18
LETTER FROM THE PRESIDENT
Lighting technology has come a very long way just
in the past decade Lower energy bills, better looking
properties, and rebates are just a few of the benefits that
come from retrofitting your businesses’ lighting!
A retrofit, or a relighting, is the renovation of your old
lighting fixtures and/or bulbs that improves the lighting
output and temperature of light all while emitting less
heat and saving energy As the government strives to
be greener and to meet our ever-growing expectations
of making less impact on the environment, there are
many incentives to get you to retrofit Most cities and
states have utility rebates A rebate is a payback on your
retrofit You’re essentially getting paid back a certain
percentage of what you paid for your retrofit because
you’re “taking a step in the right direction ”
Once you have decided to complete a lighting retrofit on
your property, how do you evaluate the differences in
competing proposals?
The bottom line is that you will want to determine which proposal offers your project the most value and
convenience Do both proposals offer the same services such as full site audits, photometric analysis, energy
audit, and rebate research? Some companies will not offer all of this to you and will have to outsource certain
services Here at ZLedLighting, we offer a “one stop shop” for all your site lighting needs So when you
contact us about a retrofit, we promise you’re getting the best there is to offer while each of our proposals are
complimentary to each customer
I have been In the lighting and electrical business for 30 years and have been involved in all aspects from
distribution to lighting design to manufacturing I have always felt that it is important to hear what the
customer’s needs are first and then put together a program that works for them
Working with ZLedLighting has given me the opportunity to bring energy efficient LED lighting fixtures
and retrofit products to customers across the country Since 2009, using the highest quality components,
ZLedLighting has developed creative lighting solutions for a wide variety of applications and sites These proven
solutions result in many cost and energy saving benefits to our customers and it is the singular reason they
consistently choose ZLedLighting for their high-performance LED lighting needs
Sincerely,
Ross Greenberg, IALD,LC LEED-AP O&M
1
ZLedLighting is a manufacturer of innovative energy-efficient LED lighting
fixtures and retrofit kits. Since 2009, ZLedLighting has been developing creative
lighting solutions utilizing quality components. Our employees come from
a variety of local, and national, contractor, distributor and manufacturing
backgrounds. This has enabled us to develop a set of marketing tools, and
strategies to help our customers and partners become more effective and
efficient in providing lighting conversion solutions.
We offer a broad spectrum of LED retrofit kits including but not limited to: corn lamps,
sign modules, flood lighting, under cabinet lighting, rope and strip lighting, and other
LED lighting solutions for commercial and residential applications
ZLED-LIGHTING.COM | (800) 679-9243
CONTRACTOR:
“I have been buying my
electrical supplies for a long
time. When I needed some
LED products I turned to
ZLedLighting. They sold me the
Magnilumen GAME CHANGER
magnetic retrofit product,
which was perfect for the job.
It was easy to install and they
helped my customer get all the
rebates. They both did a great
Job helping me satisfy my
customer.”
- Jay Davis, Electrical Contractor
END USER:
“ZLedLighting’s service was
phenomenal They were always
available for questions and jumped
in with both feet. They were totally
committed and were eager to do
whatever was needed to make sure
the project was done in a timely
and cost efficient way. I would
recommend them unconditionally
to any (car) dealer wanting to
reduce electric and maintenance
costs.”
- Richard Saccomanno Jr , Cherry Hill Audi
ABOUT
2
HOW DOES LED LIGHTING WORK?
LEDs are simply diodes that are designed to give
off light. When a diode is forward-biased so that
electrons and holes are zipping back and forth
across the junction. they’re constantly combining
and wiping one another out. Sooner or later, after
an electron moves from the n-type into the p-type
silicon, it will combine with a hole and disappear.
That makes an atom complete and more stable
and it gives off a little burst of energy in the form
of a tiny photon of light. This happens quintillions
of times per second.
3
LIGHTING COMPARISON
ZLED-LIGHTING.COM | (800) 679-9243
INCANDESCENT
MODERN
HALOGEN
COMPACT
FLUORESCENT LED
40W $22/YEAR
29W $16/YEAR
10W $5/YEAR
5W $2/YEAR
60W $32/YEAR
43W $22/YEAR
13W $7/YEAR
8W $4/YEAR
75W $41/YEAR
53W $29/YEAR
16W $9/YEAR
13W $7/YEAR
100W $54/YEAR
72W $39/YEAR
20W $11/YEAR
15W $8/YEAR
LEAST EFFICIENT
LE
SS
BR
IGH
T
MOST EFFICIENT
MO
RE
BR
IGH
T
1600 LUMENS
1100 LUMENS
800 LUMENS
450 LUMENS
80-85%MORE EFFICIENT
WHY SHOULD YOU CONVERT TO LED LIGHTING? LEDs are the latest technological advancement in the lighting industry LEDs operate
differently than traditional incandescent light bulbs, this makes LEDs far more rugged and
durable LED technology also offers many additional advantages over incandescent, neon and compact
fluorescent lighting devices - such as exceptionally longer life span (60,000 hours)
lower energy usage (90% more efficient) and reduced maintenance
costs and increased safety
4
RETROFIT OPPORTUNITIES
POTENTIAL SAVINGS: 90% PER YEAR!
LARGE/180° CORN LAMPS
LED HO PAR LAMPS
LED SINGLE COLOR FLOODS
LED UNDER CABINET LIGHTING
LED S-LAMPS
LED SIGN MODULES
SMALL CORN LAMPS
DOB CAN RETROFIT MAGNILUMEN MAGNETIC TROFFER
5
CHOOSING A RETROFIT PRODUCT
Choosing a retrofit product just got a lot easier We have created
this convenient chart and accompanying photos to help you
choose the LED retrofit product that will best fit your project
You will notice that the green checked boxes indicate a highly
recommended LED retrofit product for that application The
yellow boxes indicate that while you could use it; it’s not the
perfect retrofit product The red box indicates that the product is
not suitable for that application
In some instances you will see two or even three choices For
example, if you wanted to replace your existing work lights you
would have a choice of our large corn lights or our 180 degree
corn lights The latter only lights the front of the area because
it is perhaps attached to the ceiling and you might not need
light reflecting off the ceiling Other times, your work lights are
located lower and you need lighting above
Small Corn
Lamps
Large Corn
Lamps
180° Corn
Lamps
HID Retrofit
Kits
Magnilumen
Magnetic
Retrofit
T8 LED
Tubes
CFL
Replacement
Products
Architectural
Retrofit Kits
Bollards
P !
Scones
POutdoor
Jelly Jar PRecessed
Cans P P PWorklights
! P PHi/Low Bay
PShoeboxes
P P PCobrahead
P P PFloodlights
! P P PPosttops
P P PTroffers
P PIndustrial
Channel P P6
THE COMCAST CENTER | LIGHTING UPGRADE
In 2014, Comcast approached Hatzel & Buehler, Inc
to spearhead their search for an alternate lighting
concept, which would ultimately replace the
fluorescent lighting at the Comcast Center After
thorough research, several product attempts and
mock-up installations, a collective decision was made
to move forward with ZledLighting
ZLedLighting provided magnetically backed LED
retrofit kits, as well as CFL replacement lamps for the
Comcast Center Project Both products install very
quickly with minimal tools, and have high efficiency
ratings The magnetic retrofit product installs in less
than ten minutes, simply falling into place, turning
the entire body of the metal fixture into a heat sink
In addition to offering the most suitable products
for the Comcast Center, ZLedLighting’s installation
experience and product knowledge further
distinguished them
In partnership with ZledLighting, Hatzel & Buehler
was able to meet Comcast’s extremely aggressive
schedule for completion
Despite the difficult floor-plan and high
ceilings, the simplified design and com-
pactness of the ZLedLighting products
provided a more efficient installation,
when compared to conventional fixture
replacements
The lighting replacement project
will yield an energy savings of over
39,000 KWH per floor and an estimat-
ed 1,600,000 KWH annually The entire
project is expected to see an estimat-
ed annual 61% decrease in lighting
load per floor, which will generate a 19
month return on investment
ZLED-LIGHTING.COM | (800) 679-9243 7
WELCOME TO BUILDING Z!
Located in New York City Building Z is considering an LED retrofit with ZLedLighting’s
Magnilumen product Depending on what kind of fixtures they are replacing and what kind of
labor they use; there are different payback periods, all less than 18 months! Each city and each
building is different and ZLedLighting can build any customer a custom ROI scenario report!
ASSUMPTIONS:
• Building contains 100 fixtures
• All existing fixtures are replacedwith a 2 Lamp Magnilumen kit
• T-8’s will qualify for a $25 rebate
• T-12’s will qualify for a $50 rebate
• Con Ed Rate of $0 25/kWh, Code 13
• Product Tax Rate: 8 37%
• Service Tax Rate: 0 00%
• Existing Fixture Maintenance:
EXISTING
FIXTURES
LABOR
RATE
PROJECT
COST
NET COST
(WITH
REBATES)
10 YR
SAVINGS
PAYBACK
PERIOD
(YEARS)
COST OF
WAITING (PER
YEAR)
T8 - 4 Lamps
Union Labor $ 13,328 $10,828 $121,870 1 3 $12,672
Non Union Labor $12,028 $9,528 $121,870 1 2 $12,672
Maintenance Labor $11,248 $8,748 $121,870 1 1 $12,672
T8 - 3 Lamps
Union Labor $13,328 $ 10,828 $98,150 1 3 $9,360
Non Union Labor $12,028 $9,528 $98,150 1 3 $9,360
Maintenance Labor $11,248 $8,748 $98,150 1 3 $9,360
T8 - 2 Lamps
Union Labor $13,328 $10,828 $60,400 1 5 $5,670
Non Union Labor $12,028 $9,858 $60,400 1 3 $5,670
Maintenance Labor $11,248 $8,748 $60,400 1 3 $5,670
T12 - 4 Lamps
Union Labor $13,328 $8,328 $200,400 0 7 $19,400
Non Union Labor $12,028 $7,028 $200,400 0 6 $19,400
Maintenance Labor $11,248 $6,248 $200,400 0 5 $19,400
T12 - 3 Lamps
Union Labor $13,328 $8,328 $138,100 0 8 $14,200
Non Union Labor $12,028 $7,028 $138,100 0 8 $14,200
Maintenance Labor $11,248 $6,248 $138,100 0 7 $14,200
T12 - 2 Lamps
Union Labor $13,328 $8,328 $85,300 1 3 $8,235
Non Union Labor $12,028 $7,028 $85,300 1 3 $8,235
Maintenance Labor $11,248 $6,248 $85,300 1 3 $8,235
UNION LABOR NON UNION LABOR
~ $52 00/Fixture ~$39 00/Fixture ~$31 20/Fixture
LED RETROFIT RETURN ON INVESTMENT
8
TECHNICAL SPECIFICATIONS:
Part Number WattageLumens
+/- 10%
Dimensions
Approximate L x D
C-E26-7-NW-UL 7 770 6” X 2.375” 60w --
C-E26-9-NW-UL 9 1000 5.25” X 2.375” 90w --
C-E26-12-NW-UL 12 1320 6” X 2.375” 120w --
C-E26-15-NW-UL 15 1650 6.75” X 2.375” 150w 50w
C-E26-15-NW-MINIC-E39-15-NW-MINI
15 2,1005 13” x 2 75”
5 53” x 2 75”-- 50-100w
C-E26-18-NW-ULC-E39-18-NW-UL
Formerly 20W - same lumens!
18 2000 7.50” X 2.375”
7.50” X 2.375”
200w 70-100w
C-E26-7-NW-FR 7 700 5 12” x 1 89” 13W
C-E26-9-NW-FR 9 900 5 71” x 1 89” 13W
C-E26-12-NW-FR 12 1200 6 10” x 1 89” 26W
Suggested Equivalent
Incand. HID
ORDERING INFORMATION:
CERTIFICATIONS: CE - RoHS - UL
RATED: Up to 50,000 Hours
APPLICATIONS: Warehouse and manufacturing facilities,
outdoor post tops, bollards, commercial
and residential recessed cans, institutional
and educational facilities, and other
specialty projects
Type Base Wattage Kelvin Temp* UL Frosted Mini
C E26 Medium
E39 Mogul
7, 9, 12,
15, 18
Standard
NW - 4500-5000K - Natural White
Special Order
EW - 2700K - Extra Warm White
WW - 3100K - Warm White
DL - 5500K-6500K - Daylight
* Kelvin Temperatures may vary +/- 250K
UL FR MINI
Example: C-E26-15-NW-UL = Sm Corn - Med Base - 15 W - Natural White - UL
SPECIFICATIONS/FEATURES:
Operating temperature: -4F to + 104F
Actual wattage +/- 10%
100-305VAC
5 year limited warranty
See website for more information
Small LED Corn Lamps
PRODUCT DATASHEET
Updated 01/03/2018
Frosted Lens
Available by special order
C-E26-9-NW-FR
9W Frosted corn - Non-UL
Suggested CFL Equivalent
C-E26-15-NW-MINI
15W Mini Specially designed lamp fits
in most MINI HID Fixtures including
mini wallpacks & shoeboxes
INSTALLATION:
Secure incoming power Disconnect
ballast of old HID system and hardwire
socket to incoming power Corn lamps
contain an auto sensing driver that can
accommodate 100-305 VAC or 50-305
VDC
Corn lamps should be installed by a
qualified electrician
5.13”
2.75”
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
SMALL CORN LAMPS
Small LED Corn Lamps are great for
a variety of retrofit applications. They
are perfect for post tops, bollards and
recessed cans.
They are very easy to install, coming in a
wide assortment of wattages. colors and
bases to replace nearly every CFL and
incandescent bulb currently in use.
Remove the cap and any diffusers/ lens.
Disconnect power and remove CFL bulb.
Direct wire the fixture to the power supply and insert the CFL adapter
Cut lines to the ballast and then remove.
Screw in the new equivalent Small LED Corn Lamp. Retrofit is complete!
Remove the CFL or incandescent bulb(s).
Replace with equivalent Small LED Corn Lamp(s). Retrofit is complete!
10
ORDERING INFORMATION:
CERTIFICATIONS: ETL, DLC
RATED: Up to 35,000 Hours
Ventilation in any fixture can increase
the rated lifespan of corn lamps.
APPLICATIONS: Warehouse/manufacturing
factories, outdoor post tops, bollards,
commercial/residential recessed cans,
institutional/educational facilities, and more
Type Base Wattage Kelvin Temp* Input
C E26 Medium
E39 Mogul
30, 40, 60, 80,
100, 120, 150,
200, 250, 300
Standard
NW - 5000k - Natural White
Special Order
WW - 3000k - Warm White
W- 4000k - White
DL - 6000k - Daylight
* Kelvin Temperatures may vary +/- 250k
HE Special
Order
480VAC
Ex: C-E39-60-NW-HE= High Efficiency Corn - Mogul Base - 60 W - Natural White
SPECIFICATIONS/FEATURES:
Operating temperature: -4F to + 104F
Actual wattage +/- 10%
CRI: >80Ra
PF: >0 9
100-277VAC
277-480 VAC available on following
wattages: 30, 40, 60, 80, 100, 120
5 year limited warranty
See website for more information
INSTALLATION:
Secure incoming power Disconnect
ballast of old HID system and hardwire
socket to incoming power Corn lamps
contain an auto sensing driver that can
accommodate 100-305 VAC or 50-305
VDC
Corn lamps should be installed by a
qualified electrician Units 60w and
above are recommended for
installation in ventilated housings,
particularly in high heat environments.
TECHNICAL SPECIFICATIONS:
Part Number WattageLumens
+/- 10%
Dimensions
Approx W x L
Suggested
HID EquivCerts
C-E26-30-NW-HE30 4,350
3.66”X 7.28”100-150W n/a
C-E39-30-NW-HE 3.66”X 7.68”
C-E26-40-NW-HE40 5,800
4 17” x 7 87” 150-175W
ETL
C-E39-40-NW-HE 4 17” x 8 27” ETL, DLC
C-E26-60-NW-HE60 8,700
4 17” x 9 84” 200-250W
ETL
C-E39-60-NW-HE 4 17” x 10 24” ETL, DLC
C-E26-80-NW-HE80 11,600
4 17” x 10 63”320-360W
ETL
C-E39-80-NW-HE 4 17” x 11 02” ETL, DLC
C-E26-100-NW-HE 100 14,500
4 17” x 11 61”400W
ETL
C-E39-100-NW-HE 4 17” x 12 01” ETL, DLC
C-E39-120-NW-HE 120 17,400 5 20” x 10 63” 450-500W ETL, DLC
C-E39-150-NW-HE 150 21,750 5 20” x 10 63” 500-600W ETL, DLC
C-E39-200-NW-HE 200 29,000 5 20” x 11 73” 600-800W ETL, DLC
C-E39-250-NW-HE 250 36,250 5 20” x 12 28” 800-1000W ETL, DLC
C-E39-300-NW-HE 300 39,000 5 20” x 13 39” 1000-1200W n/a
High Efficiency
LED Large Corn Lamps
For Non-Enclosed Fixtures
PRODUCT DATASHEET
Updated 01/03/2018
for approved fixture categories
*Where noted
DLC for approved fixture categories and only available
with Mogul Bases
Suitable for use in
Enclosed Fixtures:
30W, 40W, 60W, 80W,
100W, 120W, and 150W
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
Large LED Corn Lamps are an excellent LED retrofit
product. They are perfect for post tops, hi-bay fixtures,
shoeboxes, cobraheads, worklights and floodlights.
They are very easy to install, coming in a wide
assortment of wattages, colors and bases to replace
nearly every HID, CFL and incandescent bulb in use.
Large LED Corn Lamps offer 360° illumination and
come both UL rated and Non-UL rated and have a rated
lifetime of up to 50,000 hours.
Disconnect power and remove the CFL or Incandescent bulb(s) from the post top.
Install the equivalent Large LED Corn Lamp in the fixture.
LARGE CORN LAMPS
ZLED-LIGHTING.COM | (800) 679-924312
ZL-PAD-E39-80-NW
CERTIFICATIONS: CE - RoHS - UL - where noted
RATED: Up to 50,000 Hours
CRI: >80Ra
WARRANTY: 5 year limited warranty
INPUT: 100-300VAC, 50-60Hz
480VAC available
APPLICATIONS: Street lights, landscape lighting, wallpacks, shoe boxes, enclosed and outdoor fixtures
180° LED Corn Paddle Lamps
PRODUCT DATASHEET
Updated 01/03/2018
Part Number Wattage Kelvin TemperaturesLumens +/- 10%
Dimensions Width x Length
ULSuggested
HID Equivalent
CP-180d-E26-27-NWCP-180d-E39-27-NW
27 NW - 5000K - Natural White 2970 lm3 62” x 7 80”
3 62” x 8 19”-- 100-150W
CP-180d-E26-36-NWCP-180d-E39-36-NW
36 NW - 5000K - Natural White 3960 lm3 62” x 8 94”
3 62” x 9 33”UL 150-175W
CP-180d-E26-45-NWCP-180d-E39-45-NW
45 NW - 5000K - Natural White 4950 lm3 62” x 10 08”
3 62” x 10 47”-- 175-200W
CP-180d-E26-54-NWCP-180d-E39-54-NW
54 NW - 5000K - Natural White 5940 lm 3 62” x 10 63”
3 62” x 11 02”UL 250W
CP-180d-E26-75-NWCP-180d-E39-75-NW
75 NW - 5000K - Natural White 8250 lm3 62” x 11 42”
3 62” x 11 81”UL 320-360W
30% more useable light with 180°
beam!
Heavy-duty heat sink for
enclosed fixtures
Heavy-duty heat sink
for enclosed fixtures
Support Bracket included
Base rotates for proper alignment
ORDERING INFORMATION: Example: CP-180d-E39-75-NW - 180° Corn paddle, E39 base, 75W, Natural White ZL-PAD-E39-100-NW - 180° Corn paddle, E39 base, 100W, Natural White
Type Base Wattage Kelvin Temp*
CP - 180dE26 - Medium Base
E39 - Mogul Base
27, 36,
45, 54, 75
Standard
NW - 5000K - Natural White
Special Order WW - 2700-3000K - Warm White
CW - 6000-6500K - Cool White
DL - 7000-8000K - Daylight
* Kelvin Temps may vary +/- 250K
ZL-PAD E39 - Mogul Base 80, 100, 120
IP65
Operating temp to 122°F. Specially designed for
outdoor, limited space and minimal ventilation!
Operating temp to 131°F. Specially
designed for outdoor, limited
space and minimal ventilation!
Retrofit existing fixtures
*for approved fixture categories
*for approved fixture categories
Part Number Wattage Kelvin TemperaturesLumens
+/- 10%
Dimensions
Length x width x heightUL
Suggested
HID Equivalent
ZL-PAD-E39-80-NW 80 NW - 5000K - Natural White 8,000 lm 10 83” x 5 91” x 3 15” UL 300-350W
ZL-PAD-E39-100-NW 100 NW - 5000K - Natural White 10,000 lm 10 83” x 5 91” x 3 15” UL 350-400W
ZL-PAD-E39-120-NW 120 NW - 5000K - Natural White 12,000 lm 10 83” x 5 91” x 3 15” UL 400W+
CP-180d-E39-54-NW
FEATURES: 180° Beam angle
Input Voltage: 100-277VAC, 50-60Hz
480VAC available
CRI: ≥80, PF: ≥0.9
Working Temp: -22° ~ 131°F
5 year limited warranty.
See website for more information.
Base rotates for
proper alignment
RECOMMENDED: Before installing,
please remove the existing reflector
to allow for better heat dissipation.
This will increase the longevity of
the LED lamp.
If reflector cannot be removed, then
vent holes should be placed in the
reflector for better heat transfer.
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
Disconnect the power supply and remove the cover.
Remove the HID or CFL lamp from the fixture. Cut the wires from the ballast to the socket.
Wire the power supply to the socket. Install the 180° LED Corn Lamp into the fixture. Retrofit is complete!
180° CORN LAMPS
180° Corn Lamps are perfect for wall
packs, landscape lighting, street lights and
shoeboxes.
They are very easy to Install, coming In a
wide assortment of wattages, colors and
bases to replace nearly every HID, CFL and
incandescent bulb in use.
They are perfect for situations where you
require light in only one direction. Typically
reflectors are used with HIDs or CFLs
but this lamp conserves energy by only
emitting 180° light.
14
Retrofit existing fixtures
CERTIFICATIONS: CE - RoHS - UL
RATED: Up to 50,000 Hours
WARRANTY: 5 year limited.
APPLICATIONS:
Enclosed outdoor fixtures, outdoor post tops,
bollards, commercial and residential
recessed cans, institutional and educational
facilities, shoeboxes, and wallpacks.
IP64 & IP65LED Corn Lamps
PRODUCT DATASHEET
Updated 01/08/2018
ORDERING INFORMATION:
Type Base Wattage IP Gen Kelvin Temp ( May vary +/- 250K)
C E26 Medium
E39 Mogul
16, 20, 25, 27, 36, 45,
54, 75, 80, 100, 120
Special Order: 200, 250
IP64
IP65
G2 Standard
NW -5000K -
Natural White
Special Order
EW - 2700K - Extra Warm White
WW - 3000K - Warm White
W - 4000K - White
DL - 6000K - Daylight
Example: C-E39-36-IP65-G2-NW = Corn - Mogul Base - 36 Watts - IP65 - Generation2 - Natural White
TECHNICAL SPECIFICATIONS: Voltage 100-277 VAC, 480VAC Available on G2, IP65 lamps
Part Number Wattage Base Type Dimensions Lumens +/- 10% Suggested HID Equiv.
C-E26-16-IP65-G2-NW 16W E26 2.95”x 6.49” 2,400 lm 90-100W
C-E26-20-IP64-NW 20W E26 2.38” x 7.19” 2,200 lm 50-100W
C-E26-25-IP64-NW 25W E26 2.38” x 7.88” 2,750 lm 100-150W
C-E26-27-IP65-G2-NW
C-E39-27-IP65-G2-NW27W
E26
E39
3.74” x 6.89”
3.74” x 7.28”4,050 lm 150-175W
C-E26-36-IP65-G2-NW
C-E39-36-IP65-G2-NW36W
E26
E39
3.74” x 7.87”
3.74” x 8.27”5,400 lm 175-225W
C-E26-45-IP65-G2-NW
C-E39-45-IP65-G2-NW45W
E26
E39
3.74” x 8.86”
3.74” x 9.25”6,750 lm 225-275W
C-E26-54-IP65-G2-NW
C-E39-54-IP65-G2-NW54W
E26
E39
3.74” x 9.84”
3.74” x 10.24”8,100 lm 275-325W
C-E26-75-IP65-NW
C-E39-75-IP65-NW75W
E26
E39
3.74” x 11.81”
3.74” x 12.20”10,125 lm 320-360W
C-E39-80-IP65-G2-NW 80W E39 5.51” x 9.05” 12,000 lm 400W
C-E39-100-IP65-G2-NW 100W E39 5.51” x 9.65” 15,000 lm 400-500W
C-E39-120-IP65-G2-NW 120W E39 5.51” x 10.43” 18,000 lm 400-600W
*for approved fixture categories
Operating temp to 122°F. Specially designed for
outdoor, limited space and minimal ventilation!
* Note * Medium base (E26) can be converted to Mogul base (E39) without adding length by using “Adapter-8”
High Lumens
Suitable for wet and
damp locations
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
Enclosed LED Corn Lamps are an excellent LED retrofit
product. They are perfect for a variety of enclosed fixtures, including enclosed outdoor fixtures, outdoor
post tops, bollards, commercial and residential recessed cans, and for institutional and educational facilities.
They are very easy to install, coming in a wide
assortment of wattages, colors and bases. They are UL Listed and rated up to 50,000 hours.
Disconnect power and remove the Incandescent bulb(s) from the post top or other fixture.
Install the equivalent Enclosed
LED Corn Lamp in the fixture.
ENCLOSED CORN LAMPS
ZLED-LIGHTING.COM | (800) 679-924316
ORDERING INFORMATION:
CERTIFICATIONS: UL
RATED: Up to 50,000 Hours
APPLICATIONS: Warehouse and
manufacturing high bays, parking garage
fixtures, gas station lighting, and in
various canopy lighting.
Type Base Wattage Kelvin Temp* Efficacy (L/W) Lens
C -PYR E26 Medium
E39 Mogul
30, 40, 50, 60,
70, 80
Standard
NW - 5000k - Natural White
Special Order
WW - 3000k - Warm White
DL - 6000k - Daylight
* Kelvin Temps may vary +/- 250k
150L - 150 Lumens/Watt Special Order
FR - Frosted Lens
Example: C-PYR-E39-60-NW-150L = Pyramid Corn - Mogul Base - 60 W - Natural White - 150 Lumens/Watt efficacy
SPECIFICATIONS/FEATURES:
Operating temperature: -4F to + 104F
Actual wattage +/- 10%
Frosted Lens available by special order
100-277VAC input voltage
Ballast must be bypassed.
5 year limited warranty.
See website for more information.
LED Pyramid Corn Lamps
PRODUCT DATASHEET
Updated 01/03/2018
*for approved fixture categories
TECHNICAL SPECIFICATIONS:
Part NumberAvailable
Base TypesWattage
Lumens
+/- 10%Kelvin Temp
Dimensions
Approx Diam x Length
Suggested
HID Equiv
C-PYR-E26-30-NW-150L
C-PYR-E39-30-NW-150L
E26 Medium
E39 Mogul30 4500 NW-5000K 5.04” x 7.48” 75-105w MH, HPS
C-PYR-E26-40-NW-150L
C-PYR-E39-40-NW-150L
E26 Medium
E39 Mogul40 6000 NW-5000K 5.04” x 7.48” 125-150W MH, HPS
C-PYR-E26-50-NW-150L
C-PYR-E39-50-NW-150L
E26 Medium
E39 Mogul50 7500 NW-5000K 5.04” x 7.48” 175-225W MH, HPS
C-PYR-E26-60-NW-150L
C-PYR-E39-60-NW-150L
E26 Medium
E39 Mogul60 9000 NW-5000K 5.04” x 7.48” 225-250W MH, HPS
C-PYR-E26-70-NW-150L
C-PYR-E39-70-NW-150L
E26 Medium
E39 Mogul70 10,500 NW-5000K 5.91” x 8.66” 250-275W MH, HPS
C-PYR-E26-80-NW-150L
C-PYR-E39-80-NW-150L
E26 Medium
E39 Mogul80 12,000 NW-5000K 5.91” x 8.66” 275-300W MH, HPS
The conical surface LEDs
layout design direct all light
down to the ground.
No light wasted in the
sky = greatly improved
the lighting efficiency
and lighting effect.
RETROFIT EXISTING FIXTURES
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
PYRAMID CORN LAMPS
ZLED-LIGHTING.COM | (800) 679-9243
Disconnect the power supply and remove the lamp lens.
Remove the HID or CFL lamp from the fixture. Cut the wires from the ballast to the socket.
Wire the power supply to the socket. Install the Pyramid Corn Lamp into the fixture. Retrofit is complete!
For street lights, disconnect the power supply and remove the lamp lens. Remove the existing incandescent bulb and install the new Pyramid Corn Lamp.
LED Pyramid Corn Lamps have a unique design, which
distributes light downward and outward at a downward
angle. This makes these lamps ideal as replacements
for highbays, lowbays and warehouse lighting.
They also look fantastic in street lighting and
decorative applications where light direction is
very important. They come in a wide variety of
colors, temperatures, and wattages with a rated
lifetime of 50,000 hours.
18
ORDERING INFORMATION:
CERTIFICATIONS: UL
RATED: Up to 50,000 Hours
APPLICATIONS:
Outdoor post tops
and acorn fixtures
Example: C-PST-E39-60-NW-150L= Post Corn - Mogul Base - 60 W - Natural White - 150 Lumens /watt
LED Post top Corn Lamps
PRODUCT DATASHEET
Updated 01/03/2018
TECHNICAL SPECIFICATIONS:
Part NumberAvailable
Base TypesWattage
Lumens
+/- 10%Kelvin Temp
Dimensions
Approx Diam x Length
Suggested
HID Equiv
C-PST-E26-30-NW-150L
C-PST-E39-30-NW-150L
E26 Medium
E39 Mogul30 4500 NW-5000K 5.04” x 7.48” 75-105w MH, HPS
C-PST-E26-40-NW-150L
C-PST-E39-40-NW-150L
E26 Medium
E39 Mogul40 6000 NW-5000K 5.04” x 7.48” 125-130W MH, HPS
C-PST-E26-50-NW-150L
C-PST-E39-50-NW-150L
E26 Medium
E39 Mogul50 7500 NW-5000K 5.04” x 7.48” 175-225W MH, HPS
C-PST-E26-60-NW-150L
C-PST-E39-60-NW-150L
E26 Medium
E39 Mogul60 9000 NW-5000K 5.04” x 7.48” 225-250W MH, HPS
The conical surface
LEDs layout design
direct all light down
to the ground.
No light wasted in the
sky = greatly improved
the lighting efficiency
and lighting effect.
*for approved fixture categories
RETROFIT EXISTING FIXTURES
SPECIFICATIONS/FEATURES:
Operating temperature: -4F to + 104F
Actual wattage +/- 10%
Frosted Lens available by special order
100-277VAC input voltage
Ballast must be bypassed.
5 year limited warranty. See website for more information.
Type Base Wattage Kelvin Temp* Efficacy (L/W) Lens
C -PST E26 Medium
E39 Mogul
30, 40,
50, 60
Standard
NW - 5000k - Natural White
Special Order
WW - 3000k - Warm White
DL - 6000k - Daylight
* Kelvin Temps may vary +/- 250k
150L - 150 Lumens/Watt Special Order
FR - Frosted Lens
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
POST TOP CORN LAMPS
ZLED-LIGHTING.COM | (800) 679-9243
Disconnect the power supply and remove the lamp lens.
Remove the HID or CFL lamp from the fixture. Cut the wires from the ballast to the socket.
Wire the power supply to the socket. Install the Post Top Corn
Lamp into the fixture. Retrofit is complete!
For street lights, disconnect the power supply and remove the lamp lens. Remove the existing incandescent bulb and install the new Post Top Corn Lamp.
LED Post Top Corn Lamps have a unique design, which
distributes light downward and outward at a downward
angle. This makes these lamps ideal as replacements
for highbays, lowbays and warehouse lighting.
They also look fantastic in street lighting and
decorative applications where light direction is
very important. They come in a wide variety of
colors, temperatures, and wattages with a rated
lifetime of 50,000 hours.
20
ORDERING INFORMATION:
RATED: Up to 50,000 Hours
Ventilation in any fixture can increase
the rated lifespan of corn lamps.
APPLICATIONS: Warehouse/manufacturing factories,
outdoor post tops, bollards, commercial/
residential recessed cans, institutional/
educational facilities, and more.
Type Base Wattage Kelvin Temp*
C E26 Medium
E39 Mogul
15, 20, 30, 40, 50, 65,
85, 105, 135
Standard
NW - 5000k - Natural White
Special Order
WW - 3000k - Warm White
DL - 6000k - Daylight
* Kelvin Temperatures may vary +/- 250k
MINI
STUB
Example: C-E39-65-NW-STUB = Stubby Corn - Mogul Base - 65 W - Natural White
SPECIFICATIONS/FEATURES:
Operating temperature: -4F to + 104F
Actual wattage +/- 10%
On-board fan
CRI: >80Ra
PF: >0.9
100-300VAC
480 VAC available on following
wattages: 30, 40, 50, 65, 85, 135W
5 year limited warranty.
See website for more information.
INSTALLATION:
Secure incoming power. Disconnect
ballast of old HID system and hardwire
socket to incoming power. Corn lamps
contain an auto sensing driver that can
accommodate 100-300VAC or 50-305
VDC.
Corn lamps should be installed by a
qualified electrician.
TECHNICAL SPECIFICATIONS:
Part Number WattageLumens
+/- 10%
Dimensions
Approx L x W
Suggested
HID EquivalentCerts
C-E26-15-NW-MINI15 2,100
5.24” x 2.95”50-100W ETL
C-E39-15-NW-MINI 5.24” x 2.95”
C-E26-20-NW-STUB20 2,800
5.91” x 2.95”100-150W --
C-E39-20-NW-STUB 5.91” x 2.95”
C-E26-30-NW-STUB30 4,350
6.30” x 4.17”
100-150W
ETL
C-E39-30-NW-STUB 6.69” x 4.17” ETL
C-E26-40-NW-STUB40 5,800
6.30” x 4.17”
150-175W
ETL
C-E39-40-NW-STUB 6.69” x 4.17” ETL, DLC
C-E26-50-NW-STUB50 7,250
6.30” x 4.17”
175-200W
ETL
C-E39-50-NW-STUB 6.69” x 4.17” ETL, DLC
C-E26-65-NW-STUB65 9,425
6.50” x 4.17”
200-250W
ETL
C-E39-65-NW-STUB 6.89” x 4.17” ETL, DLC
C-E26-85-NW-STUB85 12,325
6.50” x 4.17”
300-400W
ETL
C-E39-85-NW-STUB 6.89” x 4.17” ETL, DLC
C-E39-105-NW-STUB 105 15,225 9.65” x 4.17” 400-450W ETL, DLC
C-E39-135-NW-STUB 135 19,575 9.45” x 5.20” 400-550W n/a
LED Stubby Corn Lamps
PRODUCT DATASHEET
Updated 01/07/2018
Stubby Corn Lamps are great for
Short Fixtures and Specialty Applications!
15W Mini retrofitting “Mini” HID Wallpack
CERTIFICATIONS: where noted
Suitable for use in
Enclosed Fixtures:
15W, 20W, 30W, 40W, 50W,
65W, 85W, and 135W
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
Fit
s M
INI
HID
Fix
ture
s
Cherry Hill, NJ 08034 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@Zled-Lighting.com Actual product may vary.
Base Converters + Extenders
PRODUCT DATASHEET
Updated 09/11/17
Candelabra > Medium
#1
Intermediate > Candelabra
#2
Intermediate > Medium
#3 #5
Medium > Medium (Extender)
Mogul > Medium Mogul > Mogul (Extender)
Adds 1.25” to length
Adds 1.25” to length
Medium > Mogul
#6 #7
Mogul > Medium
No
Extra
Length #8
Part
NumberFixture Socket TO Lamp Type
#8 Adapter-8 Mogul (E39) >Medium (E26)
(No Extra Length)
#9 Adapter-9Mogul (E39)
(Extender)> Mogul (E39)
#10 Adapter-10 GU24 > Medium (E26)
#11 Adapter-11 G24d-1/2/3 > Medium (E26)
#12 Adapter-12G24Q-1/2/3
GX24Q-1/2/3/4/5> Medium (E26)
#13 Adapter-13 Gx23-1/2/3 > Medium (E26)
#14 Adapter-14 G23-1/2/3 > Medium (E26)
#15 Adapter-15Mogul (EX39)
(Pulse Start)> Mogul (E39)
LED Replacement is approximately 1/2 of the CFL wattageConverters add an additional 1/4”
to length of the lampG24q“q” = 4 pins “d” = 2 pins
G 2 4 d
Double Bayonette > Medium
#4
GU24> Medium
#10
Pulse Start Mogul > Mogul
#15
G24D(1/2/3)> Medium
#11
G24Q(1/2/3)> Medium
Also replaces: Gx24Q (1/2/3/4/5) #12
G23(1/2/3)> Medium
#14
#9
Gx23(1/2/3)> Medium
#13
Part
NumberFixture Socket TO Lamp Type
#1 Adapter-1 Candelabra (E12) > Medium (E26)
#2 Adapter-2 Intermediate (E17) >Candelabra
(E12)
#3 Adapter-3 Intermediate (E17) > Medium (E26)
#4 Adapter-4Double Contact -
Bayonette> Medium (E26)
#5 Adapter-5Medium (E26)
(Extender)> Medium (E26)
#6 Adapter-6 Medium (E26) > Mogul (E39)
#7 Adapter-7 Mogul (E39) > Medium (E26)
22
LED LONG TUBE FLUORESCENT REPLACEMENT PLUG-IN: 120VPart No. Example: SP-2G11-15w-30-C-UR Small Paddle, 2G11 Plugin Base, 15 W, 3000K., Clear Lens, UR
Type Base Type WattageKelvin Temp
may vary +/- 250KLens Type
Lumens +/- 10%
URSuggested
CFL Replace.
SP 2G11
15W27 - 2700K 30 - 3000K 41 - 4100K
50 - 5000-5500K 60 - 6000K
C Clear
FFrosted
1400 UR 26/32W
20W 1900 UR 42W
CERTIFICATIONS: CE - RoHS UL RATED: Up to 50,000 Hours APPLICATIONS: Recessed cans, sconces, and fi xtures.
Cherry Hill, NJ 08034 | Offi ce (800) 679-9243 | Fax (888) 336-2165 | Sales@Zled-Lighting.com Actual product may vary.
CFL Replacement LED Lamp
PRODUCT DATASHEET
Updated 08/24/2017
HORIZONTAL MOUNT PL LAMP Input: AC100-277V (50~60Hz)
Part Number
Available Bases
(Must specify in
Part Number)
WattageAvailable
Kelvin TempLumens
Dimensionslength x diam.
Suggested
Equivalent
PL-(Base)-6-NW-H G23
GX23
G24d
G24q
GX24q
GU24
6WNW - 4100WW - 3000
620 5.30” x 1.35” 13W CFL
PL-(Base)-8-NW-H 8WNW - 4100WW - 3000
850 6.30” x 1.35” 18W CFL
PL-(Base)-11-NW-H 11WNW - 4100WW - 3000
1270 7.20” x 1.35” 26W CFL
VERTICAL MOUNT PL LAMP Input: AC100-277V (50~60Hz)
Part Number
Available Bases
(Must specify in
Part Number)
WattageAvailable
Kelvin TempLumens
Dimensionslength x diam.
Suggested
Equivalent
PL-(Base)-6-NW-V G23
GX23
G24d
G24q
GX24q
GU24
6WNW - 4100WW - 3000
620 4.70” x 2.20” 13W CFL
PL-(Base)-8-NW-V 8WNW - 4100WW - 3000
850 4.70” x 2.20” 18W CFL
PL-(Base)-11-NW-V 11WNW - 4100WW - 3000
1270 4.70” x 2.20” 26W CFL
LED LONG TUBE FLUORESCENT REPLACEMENT PLUG-IN:
2G11 Base
Other Bases available by special order
Dimensions: SP-2G11-15W: 16.6”x 1.71”x 1.15” SP-2G11-20W: 21.06”x 1.71”x 1.15”
READ BEFORE INSTALLATION: IN ORDER TO USE THIS PL
REPLACEMENT LAMP, THE BALLAST MUST BE BYPASSED AND
FIXTURE REWIRED ACCORDING TO THE DIAGRAM BELOW. 110-277V
LINE AND NEUTRAL MUST BE CONNECTED TO OPPOSITE PINS OF
LAMP. IF ANY QUESTIONS OR CONCERNS, CALL (800) 679-9243
BEFORE INSTALLING. IF INSTALLED WITHOUT BYPASSING THE
BALLAST , THIS LAMP WILL BE DESTROYED.
CFL ballast must be Bypassed Directly to Lamp Socket
Checking for room in the fi xture before
ordering is critical since there many style
fi xtures that take the same PL Lamps.
Ballast must be bypassed
• =Line =Neutral
G24q - 4 pin base wiring
• =Line =Neutral
G24d - 2 pin base wiring
23
CFL Replacement LED Lamps are great for applications
where you are happy with the fixture itself, for example
decorative wall sconces or recessed cans that can be
difficult to remove and leave behind holes in the drywall
or other unsightly damage. Our line of PL Replacement
lamps make it easy to retrofit these fixtures.
PL lamps are available in a variety of wattages, color
temperatures, and base styles to fit any fixture. They
often require 50% less power than the CFL’s they replace.
Disconnect the power and remove CFL bulb.
Disconnect the power and remove CFL bulb.
Cut lines to the ballast and then remove.
Cut lines to the ballast and then remove.
Install the PL lamp into the fixture. Retrofit is complete!
Install the PL lamp into the fixture. Retrofit is complete!
PL REPLACEMENT LAMPS
24
Standard E39 BracketSupplied with kit
ORDERING INFORMATION:
CERTIFICATIONS:
CE - RoHS , UL, DLC
RATED: Up to 70,000 Hours
APPLICATIONS:
Shoeboxes, streetlights,
floodlights, wall packs, high
bays, and canopy retrofits.
Type Wattage Kelvin Temp - may vary +/- 250K Voltage
HIDRP (Philips Chips)
45, 60, 80, 100, 120, 150,
200, 240, 300, 400, 480
Standard
NW - 5000K -
Natural White
Special Order
CW - 4000K - Cool White
CW+ - 4500K - Cool White +
DL - 5700K - Daylight
90-277V - standard
HV - 200/480V
Example: HIDRP-480-NW
LED HID Retrofit Kit with Philips Chips
PRODUCT DATASHEET
Updated 01/03/2018
Brackets can be mounted vertically or horizontally in fixture
Adjustable Mounting Bracket
Order separately
Part number: AMB
Part Number Wattage Lumens DimensionsSuggested Equivalent
Incandescent CFL HIDDLC
HIDRP-45-NW45 4,950 4.69” x 4.69” x 2.69” 300W 100W 175W
No
HIDRP-45-NW-HV No
HIDRP-60-NW60 7,500 (7.08-8.27) x 5.20 x 5.12 450W 150W 300W
Yes
HIDRP-60-NW-HV No
HIDRP-80-NW80 10,000 (9.25-11.22) x 6.30 x (5.12-5.91) 600W 180W 375-400W
Yes
HIDRP-80-NW-HV No
HIDRP-100-NW100 12,500 (9.25-11.22) x 6.30 x (5.12-5.91) 800W 250W 400W
Yes
HIDRP-100-NW-HV No
HIDRP-120-NW120 15,000 (9.25-11.22) x 6.30 x (5.12-5.91) 900W 300W 400-600W
Yes
HIDRP-120-NW-HV No
HIDRP-150-NW150 18,750 (12.80-13.98) x 7.17 x (5.12-6.30) 1200W 350W 700-800W
Yes
HIDRP-150-NW-HV No
HIDRP-200-NW200 25,000 (12.80-13.98) x 7.17 x (5.12-6.30) 1500W 500W 800-1000W
Yes
HIDRP-200-NW-HV No
HIDRP-240-NW240 30,000 (12.80-13.98) x 7.17 x (5.12-6.30) 1800W 550W 1000W
Yes
HIDRP-240-NW-HV No
HIDRP-300-NW300 37,500 (14.96-17.52) x 10.24 x (5.12-6.30) 2500W 700W 1500W
Yes
HIDRP-300-NW-HV No
HIDRP-400-NW400 50,000 (14.96-17.52) x 10.24 x (5.12-6.30) 3000W 900W 1500W+
Yes
HIDRP-400-NW-HV No
HIDRP-480-NW480 60,000 (14.96-17.52) x 10.24 x (5.12-6.30) 3500W 1000W 1500W+
Yes
HIDRP-480-NW-HV No
Retrofit existing fixtures
SPECIFICATIONS/ FEATURES:
UL cUL certificate, DLC
PHILIPS Chip, SUNON fan
HIDRP: CRI: > 80Ra
Input voltage 90-277VAC.
200/480VAC where listed by HV
No UV or IR in the beam
Easy to install and operate
Instant start, NO flickering, NO humming
Green and eco-friendly without mercury.
5 year limited warranty.See website for more information.
available where noted
Number ranges under “Dimensions” account for adjustable mounting brackets.
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
HID Retrofit Kits are the best choice to replace
high energy consuming site lighting and flood
lighting. They start up instantly and never flicker.
The light they emit is soft and uniform and very
pleasing to consumers eyes. Car dealerships
choose the HID Retrofit Kits because their
automobiles look amazing under this bright,
even light. Residential communities experience
an increase in safety lighting, while cutting up to
80% off their lighting energy consumption.
Disconnect the power. Remove the lens and/or cover.
Install the new LED driver in the ballast compartment. Install the HIDR bracket, that can be mounted vertically or horizontally and slides and rotates for the correct angle. Plug in the HIDR lamp and the retrofit is complete!
Remove the HID lamp and cut out the ballast.
HID RETROFIT KITS
ZLED-LIGHTING.COM | (800) 679-924326
Cherry Hill, NJ 08034 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@Zled-Lighting.com Actual product may vary.
ZL-LEDH-ARFK6 6" Architectural LED
120~277V, 6” Non-IC 14W, 23W, 30W & 45W LED Retrofit-Kit
PRODUCT DATASHEET
Updated 03/21/2016
DESIGN FEATURES
REFLECTOR
• Heavy gauge aluminum reflector anodized in clear, haze, gold, champagne and pewter
color finish Reflectors may provide with black and white milled groove baffle collar
RETROFIT MOUNTING
• Designed for use with most existing 6-3/8”~7-1/4” aperture architectural incandescent,
fluorescent and metal halide housings Supplied with flexible metal conduit for connection
to existing electrical junction box Existing frame-in kits mounting via frictions or clips
ELECTRICAL CONNECTION
• Attach supply line to existing junction box through one of the knockouts provided in
junction box The existing socket whip and ballast can be set aside above the ceiling or
removed completely
LED POWER SUPPLY DRIVER
• 120~277V input high efficacy drivers with the capability to dim by a Triac 120V low voltage
electronic dimmer switches by 0-10V dimmer switches
• Driver feature power factor > 90, THD <20% and has integral thermal protection to sense
over temperature or internal failure
• Driver mounts externally to the module, allowing future replacement, if needed
• Install thermal detectors for 120V or 277V upon customer orders
DESCRIPTION
Architectural grade LED Recessed Downlight Retrofit Trim Module with Clear Cone
Designed for use with existing 6” Architectural Incandescent, Fluorescent and Metal Halide
Housing Also, compatible with most 6” architectural housings measuring at least 5-5/8”
high with an inside diameter between 6-3/8” and 7-1/4” (See Housing Compatibility
section) Provided in high efficacy LED with integral dimmable driver and the optical
diffusion produces high lumen transmission and even illumination Suitable for Damp
location
SPECIFICATIONS
LED Quantity 1ea (COB)
Input Voltage 120-277V AC
Wattage (+/-5%) 14W 23W 30W 45W
Lumens (+/-5%) 947 1573 2078 2886
Efficacy (LPW) 67 6 68 4 69 3 65 3
Beam Angle 75° 75° 75° 75°
Color (+/-5%) 3000K, 3500K, 4000K
CRI (Typical) 80
Dimming Triac (Standard), 0-10V
Rated up to 50,000 hr
Environment Damp & Wet Location
Triac Approved Dimmers
* Lutron: NovaT (Ntelv 300&600)
Diva (Dvelv-300P&303P)
* Leviton: Acenti: Ate06-1Lw
* Leviton Trimatron #705W (incandescent)
0-10V Approved Dimmers
* Lutron: Nova 0-10V : NTFTV
Diva 0-10V : DVTV
* Leviton: Decora 0-10V : IP710DL
Consult tech, service or factory for
additional dimmers
Easy Quick Connector Case
℃
①②
OPTIONS
• Emergency battery back-up : Available
in mounted to fixture or remote adjacent
to luminaire (consult with factory for
exact application)
WARRANTY
• 50,000 hr lamp life
Listing ETL & cETL Listed
-State of California Title 24
-Energy star Approved & Listed
Ceiling Cut-out : 6-3/8”~7-1/4”
①②
6-1/16”153mm
5-5/8”(143.2mm)
①②
7-15/16”(201mm)
DRIVER
①②
27
RECESSED DOWNLIGHT RETROFIT
ZLED-LIGHTING.COM | (800) 679-9243
Recessed downlight retrofits are an easy alternative to
installing new fixtures when you want to upgrade to
LED and select a new reflector and trim kit. They are
designed for use with existing 6” architectural housings
measuring at least 5-5/8” high with an inside diameter
between 6-3/8” and 7-1/4”. They are high efficiency LED with
internal dimmable driver and suitable for damp locations.
Reflectors come in clear, haze, gold, champagne and
pewter. Trim options include black and white.
Disconnect power and pull trip and reflector down from ceiling.
Disconnect ballast (if CFL) and remove. Remove socket and wire from the electrical box.
Wire the retrofit kit to the electrical box, attach the driver to the box or framing kit. Push the new reflector and trim kit into the ceiling
28
Magnilumen Magnetic LED
Fluorescent Retrofit Kits
Retail Packaging
PRODUCT DATASHEET
Updated 01/03/2018
Part Number - (Available Colors) Watt.LED
Strips
# of
Drivers
- Total
Wattage
Color Temp
(Must specify in
part number)
Lumens (with / without)
frosted diffuser lens
on led boards
Certifications
with without
MRK2430-(35k/40k/50k) [Retail packaging] 30W 2 x 4ft 1 - 30W35k - 3500k
40k - 4000k
50k - 5000k
3600 4260 ETL/DLC Premium
MRK2440-(35k/40k/50k) [Retail packaging] 40W 2 x 4ft 1 - 40W 4800 5680 ETL/DLC Premium
MRK2450-(40k/50k) [High Output] [Retail packaging] 50W 2 x 4ft 1 - 50W 6000 7100 ETL/DLC Premium
MRK2220-(35k/40k/50k) [Retail packaging] 20W 2 x 2ft 1 - 20W 2400 2840 ETL/DLC Premium
Retail Packaging: Full-color box sleeve
design with installation instructions
MUST SPECIFY IF ORDERING RETAIL PACKAGING (Available only on kits listed in table below)
RETROFIT EXISTING FIXTURES
Almost any light fixture can be renovated
with a Magnilumen Retrofit kit
THE GAME CHANGER IN LED RETROFITTING
CERTIFICATIONS: ETL, DLC Premium
RATED: Up to 100,000 Hours
APPLICATIONS:
2ft & 4ft Troffers
2ft, 4ft, 6ft & 8ft Channel Lights
2ft, 4ft & 8ft Surface Mount Fixtures
2x2, 2x4 & 2x8 ft Highbay Fixtures
2ft, 4ft, 6ft & 8ft Vapor Tight Fixtures
2x2 & 2x4 ft Direct & Indirect Fixtures
SPECIFICATIONS:
Input: 120/305VAC
Luminous Efficiency: >145 lm/W for the LED Module
>124–132 lm/W in a Luminaire
CRI (Ra): 83 nominal, Up to 95 CRI Avail.
Power Factor >.920
Ambient Temp. Range: -4° to 122°F
L70 >50,000 hours
IP: LED Board - IP30, LED Driver - IP20
5 year warranty. See warranty
page for details.
RETROFIT KITS INCLUDE:• LED boards • LED Driver (Pwr Supply)
• Wiring Harness • Magnetic Mounting
Maximum Watts per LED Board
LED Board Size : Max Watts per Board (per Color Temp)
16in: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)
2ft: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)
3ft: 15W (3000-6000K) 15 W (Red/Grn/Blue/Blk)
4ft: 25W (3000-6000K) 20 W (Red/Grn/Blue/Blk)
5ft: 30W (3000-6000K) 25 W (Red/Grn/Blue/Blk)
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
On-board 0-10V Dimmable Magnetic Driver
“Plug & Play“ 2-Way Wiring Harness
Quick-Connect
Clips
Clips to LED Boards
Input
PowerCERTIFICATIONS: ETL, DLC Premium
RATED: Up to 100,000 Hours
APPLICATIONS:
2ft & 4ft Troffers
2ft, 4ft, 6ft & 8ft Channel Lights
2ft, 4ft & 8ft Surface Mount Fixtures
2x2, 2x4 & 2x8 ft Highbay Fixtures
2ft, 4ft, 6ft & 8ft Vapor Tight Fixtures
2x2 & 2x4 ft Direct & Indirect Fixtures
Magnilumen Magnetic LED
Fluorescent Retrofit Kits
Job Packs
PRODUCT DATASHEET
Updated 01/03/2018
SPECIFICATIONS:
Input: 120/305VAC
Luminous Efficiency:
>145 lm/W for the LED Module
>124–132 lm/W in a Luminaire
CRI (Ra): 83 nominal,
Up to 95 CRI Available
Power Factor >.920
Ambient Temperature Range:
-4° to 122°F
L70 >50,000 hours
IP: LED Board - IP30, LED Driver - IP20
5 year warranty.
See warranty page for details.RETROFIT KITS INCLUDE:
• LED boards
• LED Driver (Power Supply)
• Wiring Harness
• Magnetic Mounting
4FT RETROFIT SPECIFICATIONS - 43” (Economy packaging)
Part Number - (Color) Watt. LED Strips # of
Drivers
- Total
Wattage
Color Temp
(Must specify in
part number)
Lumens (with / without)
frosted diffuser lens
on led boards
Certifications
with without
MRK1410-(30k/35k/40k/50k) 10W 1 x 4ft 1 - 10W
30k - 3000k
35k - 3500k
40k - 4000k
50k - 5000k
1200 1420 ETL/DLC Premium
MRK1420-(30k/35k/40k/50k) 20W 1 x 4ft 1 - 20W 2400 2840 ETL/DLC Premium
MRK2420-(30k/35k/40k/50k) 20W 2 x 4ft 1 - 20W 2400 2840 ETL/DLC Premium
MRK2430-(30k/35k/40k/50k) 30W 2 x 4ft 1 - 30W 3600 4260 ETL/DLC Premium
MRK2440-(30k/35k/40k/50k) 40W 2 x 4ft 1 - 40W 4800 5680 ETL/DLC Premium
MRK2450-(30k/35k/40k/50k) [High Output] 50W 2 x 4ft 1 - 50W 6000 7100 ETL/DLC Premium
MRK3430-(30k/35k/40k/50k) 30W 3 x 4ft 1 - 30W 3600 4260 ETL/DLC Premium
MRK3440-(30k/35k/40k/50k) 40W 3 x 4ft 1 - 40W 4800 5680 ETL/DLC Premium
MRK3450-(30k/35k/40k/50k) [High Output] 50W 3 x 4ft 1 - 50W 6000 7100 ETL
MRK4450-(30k/35k/40k/50k) [High Output] 50W 4 x 4ft 1 - 50W 6000 7100 ETL
2FT RETROFIT SPECIFICATIONS - 21” (Economy packaging)
MRK1210-(30k/35k/40k/50k) 10W 1 x 2ft 1 - 10W
30k - 3000k
35k - 3500k
40k - 4000k
50k - 5000k
1200 1420 ETL/DLC Premium
MRK2220-(30k/35k/40k/50k) 20W 2 x 2ft 1 - 20W 2400 2840 ETL/DLC Premium
MRK3220-(30k/35k/40k/50k) 20W 3 x 2ft 1 - 20W 2400 2840 ETL/DLC Premium
MRK3230-(30k/35k/40k/50k) 30W 3 x 2ft 1 - 30W 3600 4260 ETL/DLC Premium
MRK4230-(30k/35k/40k/50k) 30W 4 x 2ft 1 - 30W 3600 4260 ETL
MRK4240-(30k/35k/40k/50k) 40W 4 x 2ft 1 - 40W 4800 5680 ETL
MRK4250-(30k/35k/40k/50k) [High Output] 50W 4 x 2ft 1 - 50W 6000 7100 ETL
ORDERING GUIDE: Example part number - MRK3450-50k
SERIES BOARD QTY BOARD LENGTH WATT. COLOR TEMP
MRK
1 - BOARD
2 - BOARDS
3 - BOARDS
4 - BOARDS
F15 - 16 IN
2 - 2 FT
3 - 3 FT
4 - 4 FT
5 - 5 FT
5
10
20
30
40
50
30k - 3000k
35k - 3500k
40k - 4000k
45k - 4500k
50k - 5000k
2ft (21” LED boards)
4ft (43” LED boards)
Standard Kits come with all necessary components. Example: MRK3450-50k
Includes 3-way harness, LED driver, 3 sets of Mag-No-Hook mounting pieces & frosted lens
Only specify “Special Order Options” in part number
Example part number: MRK3450-50k-Harness-3-way-EXTHARNESS MOUNTING DIFFUSER LENS
Harness-1-way-Ext
Harness-3-way-Ext
Harness-4-way-Ext
Mag-Hook
No-Mag-Hook-Only
No-Mag-No-Hook
End-Tab
Clear
None4500 Kelvin (45k) and 6000 Kelvin (60k) kits available
by special order - minimum order quantity may apply
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
Magnilumen Magnetic LED Fluorescent Retrofit Kits - Cont’dOdd Lengths & Specialty Colors
JOB PACKS
PRODUCT DATASHEET
Updated 01/03/2018
Part Number - (Color) Watt. LED Strips
# of
Drivers
- Total
Wattage
Color Temp
(Must specify in
part number)
Lumens (with / without)
frosted diffuser lens
on led boards
Certifications
with without
16IN RETROFIT SPECIFICATIONS - 16” (F15 LAMP REPLACEMENT)40k - 4000k
50k - 5000kMRK-1-F15-5W-(40k/50k) 5W 1 x 16in 1 - 5W 600 710 ETL
MRK-2-F15-10W-(40k/50k) 10W 2 x 16in 1 - 10W 1200 1420 ETL
3FT RETROFIT SPECIFICATIONS - 31”
MRK1310-(30k/35k/40k/50k) 10W 1 x 3ft 1 - 10W
30k - 3000k
35k - 3500k
40k - 4000k
50k - 5000k
1200 1420
MRK2320-(30k/35k/40k/50k) 20W 2 x 3ft 1 - 20W 2400 2840 ETL
MRK3320-(30k/35k/40k/50k) 20W 3 x 3ft 1 - 20W 2400 2840 ETL
MRK3330-(30k/35k/40k/50k) 30W 3 x 3ft 1 - 30W 3600 4260 ETL
MRK3340-(30k/35k/40k/50k) 40W 3 x 3ft 1 - 40W 4800 5680 ETL
MRK4350-(30k/35k/40k/50k) [High Output] 50W 4 x 3ft 1 - 50W 6000 7100 ETL
Part Number - (Color) (Economy packaging) Watt. LED Strips # of Drivers - Total Wattage
Color Temp Certifications
4FT SPECIALTY COLORS - 43”
MRK2430-(60k/Red/Grn/Blue/Blk) 30W 2 x 4ft 1 - 30W
60k - 6000K
Red - Red
Grn - Green
Blue - Blue
Blk - Blacklight
(Must specify
in part number)
ETL (6000K only)
MRK2440-(60k/Red/Grn/Blue/Blk) 40W 2 x 4ft 1 - 40W ETL (6000K only)
MRK3440-(60k/Red/Grn/Blue/Blk) 40W 3 x 4ft 1 - 40W ETL (6000K only)
MRK3450-(60k/Red/Grn/Blue/Blk) [High Output] 50W 3 x 4ft 1 - 50W ETL (6000K only)
MRK4450-(60k/Red/Grn/Blue/Blk) [High Output] 50W 4 x 4ft 1 - 50W ETL (6000K only)
2FT SPECIALTY COLORS - 21”
MRK2220-(60k/Red/Grn/Blue/Blk) 20W 2 x 2ft 1 - 20W ETL (6000K only)
MRK3220-(60k/Red/Grn/Blue/Blk) 20W 3 x 2ft 1 - 20W ETL (6000K only)
MRK3230-(60k/Red/Grn/Blue/Blk) 30W 3 x 2ft 1 - 30W ETL (6000K only)
MRK4230-(60k/Red/Grn/Blue/Blk) 30W 4 x 2ft 1 - 30W ETL (6000K only)
5FT RETROFIT SPECIFICATIONS - 58”
MRK1520-(30k/35k/40k/50k) 20W 1 x 5ft 1 - 20W
30k - 3000k
35k - 3500k
40k - 4000k
50k - 5000k
2400 2840 ETL
MRK1530-(30k/35k/40k/50k) 30W 1 x 5ft 1 - 30W 3600 4260 ETL
MRK2530-(30k/35k/40k/50k) 30W 2 x 5ft 1 - 30W 3600 4260 ETL
MRK2540-(30k/35k/40k/50k) 40W 2 x 5ft 1 - 40W 4800 5680 ETL
MRK2550-(30k/35k/40k/50k) [High Output] 50W 2 x 5ft 1 - 50W 6000 7100 ETL
MRK3540-(30k/35k/40k/50k) 40W 3 x 5ft 1 - 40W 4800 5680 ETL
MRK3550-(30k/35k/40k/50k) [High Output] 50W 3 x 5ft 1 - 50W 6000 7100 ETL
MRK4550-(30k/35k/40k/50k) [High Output] 50W 4 x 5ft 1 - 50W 6000 7100 ETL
4500 Kelvin (45k) and 6000 Kelvin (60k) kits available
by special order - minimum order quantity may apply
**Note** Specialty colors (Red, Grn, Blue, Blk) efficacy: 20 Lumens per watt
RETROFIT KITS INCLUDE: • LED boards • LED Driver (Power Supply) • Wiring Harness • Magnetic Mounting
ORDERING GUIDE: Example part number - MRK3450-50k
SERIES BOARD QTY BOARD LENGTH WATTAGE COLOR TEMP
MRK
1 - BOARD
2 - BOARDS
3 - BOARDS
4 - BOARDS
F15 - 16 IN
2 - 2 FT
3 - 3 FT
5
10
20
30
40
50
Red - RedGrn - GreenBlue - BlueBlk - Blacklight30k - 3000k35k - 3500k40k - 4000k45k - 4500k50k - 5000k60k - 6000k
Special sizes and colors available
minimum order quantity may apply.
Specialty Colors - 3 year limited warranty
(Economy packaging)
Standard Kits come with all necessary components. Example: MRK3450-50k Includes 3-way harness, LED driver,
3 sets of Mag-No-Hook mounting pieces & frosted lens
Only specify “Special Order Options” in part number
Example part number: MRK3450-50k-Harness-3-way-EXTHARNESS MOUNTING DIFFUSER LENS
Harness-1-way-Ext
Harness-3-way-Ext
Harness-4-way-Ext
Mag-Hook
No-Mag-Hook-Only
No-Mag-No-Hook
End-Tab
Clear
None
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
ORDERING GUIDE: Example part number - MRK3450-50k
SERIES BOARD QTY BOARD LENGTH WATT. COLOR TEMP
MRK
1 - BOARD
2 - BOARDS
3 - BOARDS
4 - BOARDS
F15 - 16 IN
2 - 2 FT
3 - 3 FT
4 - 4 FT
5 - 5 FT
5
10
20
30
40
50
30k - 3000k
35k - 3500k
40k - 4000k
45k - 4500k
50k - 5000k
On-board 0-10V Dimmable Magnetic Driver
“Plug & Play“ 2-Way Wiring Harness Quick-Connect Clips
Clips to LED Boards
Input Power
PLUG & PLAY HARNESSES
Harness-1-way Connects 1 LED board to 1 driver.
Lead from driver connection to splitter: 11.00”;
1 board lead: 11.75”
Harness-1-way-Ext (Special Order) Connects 1 LED
board to 1 driver, has 8 ft extension on driver end.
Harness-2-way Connects 2 boards to 1 driver (Standard).
Lead from driver connection to splitter: 11.00”;
2 board leads: each 11.75”
Harness-3-way Connects 3 boards to 1 driver.
Lead from driver connection to splitter: 11.00”;
3 board leads: each 11.75”
Harness-3-way-Ext (Special Order) Connects 3 boards
to 1 driver, has 6 ft extension on driver end. Lead from driver
connection to splitter: 11.00”; 2 board leads: each 11.75”, 1
board lead: 72.00”
Harness-4-way Connects 4 led boards to 1 driver
Lead from driver connection to splitter: 11.00”;
4 board leads: each 11.75”
Harness-4-way-Ext Connects 4 led boards to 1 driver
2 board leads: each 11.75”, 2 board leads: 72.00”
Mag-Hook Clip with Magnet and Tab Feet for
optional TekScrew attachment
No-Mag-No-Hook Clip with center hole for TekScrew attach-
ment - NOT Magnetic
No-Mag-Hook-Only Tab Feet for TekScrew
attachment - NOT Magnetic
End-Tab Attaches to ends of LED board. Tab with
hole for optional TekScrew attachment -
Driver-10W 10W Dimmable Driver
Driver-20W 20W Dimmable Driver
Driver-30W 30W Dimmable Driver
Driver-40W 40W Dimmable Driver
Driver-50W 50W Dimmable Driver
STANDARD DRIVERS 0-10V Dimmable, Magnetic Backing for quick mounting w/ holes for optional
Tek Screw attachment. Driver Dimensions: 10.94”L x 1.12”W x 0.88”H
MOUNTING OPTIONS
STANDARD MOUNTING
Frosted (Standard)
Clear (Special Order)
None (Special Order)
REMOVABLE DIFFUSER LENS
Triac dimming coming soon! See website for more information.
(2 pcs supplied per LED board) Must specify in part number if required
MRK3460-(30k/35k/40k/50k) - Three 4ft boards
MRK4460-(30k/35k/40k/50k) - Four 4ft boards
MRK2560-(30k/35k/40k/50k) - Two 5ft boards
MRK3560-(30k/35k/40k/50k) - Three 5ft boards
MRK4560-(30k/35k/40k/50k) - Four 5ft boards
High Output Kit with 60W Driver available - Special Order - minimum quantities may apply Lumens (with / without)
Frosted diffuser lens on led boards
with without
7200 lm 8520lm
Magnilumen Kit Components
PRODUCT DATASHEET
Updated 01/03/2018
Maximum Watts per LED Board
LED Board Size : Max Watts per Board (per Color Temp)
16in: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)
2ft: 10 W (3000-6000K) 10 W (Red/Grn/Blue/Blk)
3ft: 15W (3000-6000K) 15 W (Red/Grn/Blue/Blk)
4ft: 25W (3000-6000K) 20 W (Red/Grn/Blue/Blk)
5ft: 30W (3000-6000K) 25 W (Red/Grn/Blue/Blk)
Standard Kits come with all necessary components. Example: MRK3450-50k
Includes 3-way harness, LED driver, 3 sets of Mag-No-Hook mounting pieces & frosted lens
Only specify “Special Order Options” in part number
Example part number: MRK3450-50k-Harness-3-way-EXTHARNESS MOUNTING DIFFUSER LENS
Harness-1-way-Ext
Harness-3-way-Ext
Harness-4-way-Ext
Mag-Hook
No-Mag-Hook-Only
No-Mag-No-Hook
End-Tab
Clear
None
Mag-No-Hook (Standard) Clip with Magnet. Magnetic attachment only. Comes with all kits unless
other mounting specified
4500 Kelvin (45k) and 6000 Kelvin (60k) kits available
by special order - minimum order quantity may apply
717 Fellowship Rd. Unit A | Mount Laurel, NJ 08054 | Office (800) 679-9243 | Fax (888) 336-2165 | Sales@ZLed-Lighting.com Actual product may vary.
N OT E S
Extra Warm White Warm White Daylight
N OT E S
2500 KELVIN 3500 KELVIN 4000 KELVIN
Natural White
5000 KELVIN
Cool White
6500 KELVIN
COOL LIGHTAPPROXIMATE COMPARATIVE KELVIN COLOR TEMPERATURE CHARTWARM LIGHT
GENERAL NOTES:
While some lamps are designed
specifically for enclosed fixtures
and high-operating temperatures,
in general, adequate ventilation
around an LED lamp increases the
life of the lamp.
DLC certification of lamp only qualifies
for approved fixture categories.
Kelvin Temperatures may vary +/- 250K
Lumen Output may vary +/- 10%
Actual Wattage may vary +/- 10%
Due to rapid advancements in LED technology,
these specifications are subject to change.
Please visit us online at ZLed-Lighting.com
for full specifications, installation & ordering details.
COMMON BASE TYPES:
E26 - Medium Screw Base
E39 - Mogul Screw Base
E12 - Candelabra Screw Base
• View our complete catalog
• Get a custom lighting quote
• Chat with one of our
lighting designers
• Learn about ZLedLighting
• View our website
ONE APPTONS OF FEATURES
AVAILABLE FOR DOWNLOAD AT:
ZLed-Lighting.com
(800) 679-9243
Paper, i t ’s not an Earth-fr iendly word
these days. Our catalogs of energy saving,
environmentally friendly products use over 50
pieces of paper. By using our app instead of a
paper catalog you are helping us do even better
for our planet. Find us in the app store under
ZLED Catalog.
• View our complete catalog
• Get a custom lighting quote
• Chat with one of our lighting designers
• Learn about ZLedLighting
• View our website
2018 LED RETROFIT PRODUCTS
CHECK OUT THE CATALOG APP!
717 Fellowship Road Mount Laurel, NJ
(800) 679-9243
www.ZLed-Lighting.com