Post on 09-Mar-2016
description
byby
LEDour way
ambience
Our lighting philosophy can be abridged to just three letters.
Standing for Function, Comfort and Ambience, FCA® encom-
passes a multi-tude of terms all of which are crucial in the
manufacture of an original Louis Poulsen light fi xture.
comfort
function
®fca
peo
5
Light makes life, and life is lived in light. At Louis Poulsen, we never design just to win awards;
we do not look for inspiration in trends, but in our perception of lighting and aesthetics which are
defi ned in our lighting philosophy. Our lighting starts and ends with people. Decades of research
and development have been invested in creating the highest quality lighting for reaching a highly
personal, more human level.
ple
Life would not exist without light. Yet at Louis Poulsen
we see light not only as a necessity, but also as an op-
portunity. As daylight fades, our lighting is designed to
take over, adding new dimensions and creating vibrant
spaces, both indoors and out. This ongoing development
of artifi cial lighting for the benefi t of human well-being
remains as our greatest endeavor.
life
7
457
913
1370
1826
2
The one detail that we consider the most important part of
the fi xtures of Louis Poulsen - lighting technique. Each aspect
infl uences the construction and the light distribution. Every
component has its specifi c function. The product is designed
for a light source that creates the feeling of comfort and hu-
manizes the atmosphere. The design of Louis Poulsen fi xtures
is for the eyes only – in more ways than one.
lightingtechnology
INJECTION MOLDED U.V. AND WEATHER RESISTANT (ASA) TOP SHADE AND EDGEBAND FINISHED IN WHITE FOR NATURALPAINTED ALUMINUM VERSIONS OR BLACK FOR BLACK VERSIONS
LED 58W, 4100K CCT
intell
11
Intelligent lighting is often used to describe electronically-controlled
lighting. Our philosophy is that all of our lighting is intelligent. Based on
a unique approach to light, which is considered throughout the manu-
facturing process, we examine all aspects of the design, down to the
smallest detail, giving the term intelligent lighting an added dimension
and adhering to one simple rule – no detail without a purpose.
igent
REFLECTOR FOR ILLUMINATION CLOSE
TO THE POLE
TOP-REFLECTOR FOR VERTICAL LIGHT
UPWARD DIRECTED LED.
25% OF THE EMITTED LIGHT
LIGHT ENGINE WITH MULTIPLE FUNCTIONS:
- OUTSIDE COOLING THROUGH NATURAL
AIR CONVECTION
- INSIDE SUPPORT FOR LED´S
- ANTI-GLARE RING
DOWNWARD DIRECTED LED.
75% OF THE EMITTED LIGHT
STEM CONTAINING WIRING
REFLECTOR FOR WIDE
LIGHT DISTRIBUTION
Updating a product is always done with the great-
est respect for the originally designed lighting con-
cept. At the same time all details still have to have
a function. To be true to our product philosophy will
always be the challenge, but at the same time the
warranty for a solution focussing on people. This is
why Louis Poulsen products maintain their power of
attraction. No compromises – only the best solution.
r e s p e c t
The basics of Louis Poulsen are to create solutions with the
best possible comfort for human beings. The humanization
of light sources includes many aspects, but the most im-
portant is to avoid obtrusive glare so it becomes easier to
see and to be seen, and hence feeling secure and comfort-
able in a pleasant atmosphere. Therefore, the quality of
light is not just measureable fi gures but more the human
experience of the light.
25%
15
humanization
75%
content
17
SATELLIT MINI LED 18
LP NEST LED 20
RUBBIE LED 22
AJ 50 WALL LED 24
KIPP POST LED 26
KIPP BOLLARD LED 28
KIPP WALL LED 30
AH NYHAVN AREA LIGHT LED 32
WATERFRONT LED 34
PAGODA LED 36
F+P 550 LED 38
F+P 1500 LED 40
18
the fi xture that changed the perception (of outdoor lighting)
The Park at Lakeshore East, Chicago, IL, USA
Architect: Site Design Group, Ltd./The Office of James Burnett
Lighting Design: Site Design Group, Ltd., A. Epstein & Sons Int’l., Inc.
Photo: Ron Gordon / Site Design Group, Ltd.
19
19.3
”
26.0”
Finish: White, grey or graphite grey, powder coated.Light source: 53W LED, 4100K.Material: Top shade: Die formed fi ber glass. Enclosure: Injection molded clear polycarbonate. Heat sink: Die cast aluminum. Base: Die cast aluminum. Struts: Stainless steel.Weight: 25 lbs.
facts
Design: : Jens Møller-Jensen
Louis Poulsen Factory,
Vejen, Denmark.
Photo: Kaslov Studio
Satellit Mini has been copied all over the world and inspired myriad outdoor
lighting solutions, but why settle for a copy when you can get the original?
The lighting concept of Satellit Mini has always been unique, and the chal-
lenge for the LED version was to maintain this extraordinary uniqueness -
especially in terms of glare-free lighting and the sense of feeling secure. The
process has been long and challenging, as described earlier. The concept has
been turned upside down, so it is now the LED that points downward that
delivers 75% of the light spread on the pavement, the rest comes from the
upper LED by the refl ection of the top shield, this takes care of the area closer
to the post. The antiglare ring now functions as the LED heat sink, and the
stems cover the power supply cord. The famous Satellit Mini idiom has been
kept, so replacements in existing projects is possible without disturbing the
overall perception of the lighting atmosphere.
satellit mini led
13’’
29.5’’factsFinish: Housing: Natural pained aluminum or graphite grey, powder coated.Light source: 58W LED, 4100K.Material: Housing: Die cast aluminum. Refl ector: Specular spun aluminumTop shade: White painted aluminum.Weight: Max. 18 lbs.
Inspired by na-
ture. Organic
design combined
with both functional and dec-
orative lighting. LP Nest brings nature
into the urban environment. The simplicity of
the design fi ts carefully into a variety of locations – and
brings new life to the surroundings and its people. LP Nest
is the newest post top from Louis Poulsen, also new in the way
of thinking light. LP Nest carries the top plate which works as
a refl ector and the mechanical design ensures full glare control
in addition to a good vertical light distribution. Again, like other
Louis Poulsen post top luminaires, LP Nest keeps its graphical
idiom whether lit or unlit. The dimensions secure a quiet ap-
pearance no matter where the fi xture is placed, and the light
distribution makes it unique for any application.
Design: Bystrup design
21
lp nest ledinspired by nature
Louis Poulsen Factory,
Vejen, Denmark.
Photo: Kaslov Studio
22
rubbie bollard led
Danish Pavilion, EXPO Fair Hannover, Germany. Photo: Planet
23
28.2
11.6”
15.7
The naval idiom comes from the bollards along the harbour quays. A pure
functional object. The design expresses the function. No details without a
purpose. This is Rubbie. Rubbie is, as the name indicates, made of rub-
ber. It is both hard and soft at the same time, harder than your normal
experience of rubber, soft compared to aluminum. The material has been
tested for more than 5 years, and has shown a fantastic durability. Over
the years, the material will become ”designed” by nature similar to the
other bollard of Peter Bysted, the Bysted bollard made of corten steel.
Rubbie is available with color temperatures of 3000K (19W of sys-
tem power) and 4000K (18W of system power). The light distribution
is glare free, has an optimised vertical distribution which creates a
friendly and secure experience for human beings. The height and
the material also make the bollard useable as a relaxing object in
the urban area.
factsFinish: Black.Light source: 19W LED, 3000K or 18W LED, 4000K.Material: Body: UV-stabilised EPDM rubber. Enclosure: Clear polycarbonate. Top shade: UV-stabilised EPDM rubber.Weight: 37.5 lbs.
Design: Peter Bysted
charming light
24
aj 50 wall led
Priv
ate
resi
denc
e, C
open
hage
n, D
enm
ark.
Pho
to: J
espe
r R
ay
25
AJ 50 Wall is an indoor and outdoor wall fi xture designed on the basis
of the world-known AJ family. Simple geometrics in austere design
where shapes directly refl ect the light emission. The location,
color rendition (RA>80) and color temperature (3000°K) of
the LED help maintain the well-known and valued light-
ing comfort. AJ 50 Wall is made of die cast alumi-
num with a textured surface that offers better
resistance to the challenges of the weather.
Available in black, aluminum color and
white. State-of-the-art LED techno-
logy means that the driver can
be dispensed with. AJ 50
Wall emits glare-free,
downward lighting.
The white inner shade
refl ects light downwards and the precise angle of the
shade provides decorative backlight that illuminates wall and
material in a comfortable and exclusive manner.
a design icon featuring a new lighting technology
Design: Arne Jacobsen
factsFinish: Black, graphite grey or white, structured, powder coated.Light source: 8W LED, 3000K.Material: Die cast aluminum.Weight: Max. 4.5 lbs.
12.4”
5.4”
9.8”
0.9”
13.8”
26
18.1
”
30.4”
Last year Kipp Wall and bollard celebrated their 10th anniversary. Since the beginning, the
Kipp family has proven its uniqueness. Effi ciency is part of the design, and the LED-versions
are no exceptions. The matte opal diffuser ensures a non glaring light distribution. The de-
sign optimises the use of the light source whether it is a conventional light source or LEDs.
Focusing on each detail the Alfred Homann way
ensures both effi ciency and product quality.
The comfort is unique and the adaptability to
all kinds of architecture and surroundings is a trade
mark of Alfred Homann. The light distribution is symmetri-
cal downwards. The relationship between the curved design of
the top shade and the calculated distance to the LED ensures a
uniform and wide distribution of light.
kipp post led
factsFinish: Natural painted aluminum or black, powder coated.Light source: 58W LED, 4100K.Material: Diffuser: Injection molded white opal acrylic. Top shade: Injection molded ASA. Enclosure: Injection molded clear polycarbonate. Frame: Die cast aluminum.Weight: Max. 24 lbs.
Design: Alfred Homann
26
27
sustainable product and lighting quality
California State University
San Bernardino College of Education,
San Bernardino, CA, USA
Architect: LPA Inc.
Photo: Costea Photography
28
design and effi ciency
Eastside Cannery Hotel & Casino,
Las Vegas, NV, USA
Architect: Klai Juba Architects
Photo: Saari & Forrai Photography
29
51.8
”
17.3”
11.0”
29
kipp bollard ledAn extremely good example of one of the important issues
in the Louis Poulsen lighting philosophy – to have the same
idiom both lit an unlit. As simple as it gets. But with a com-
fort for humans combined with rarely seen effi ciency. As with
the other member of the Kipp family, the sense of simplicity
is the key to success. A fantastic adaptability to any surround-
ings whether architectural or nature. The light distribution
is symmetrical downwards. The relationship between the
curved design of the top shade and the calculated distance
to the LED ensures a uniform and wide distribution of light.
Furthermore, the freestanding position ensures superb 360°
light distribution around the fi xture, so both the paths and
the space behind are beautifully illuminated.
Design: Alfred Homann
factsFinish: Natural painted aluminum or black, powder coated.Light source: 37W LED, 4000K.Material: Diffuser: Injection molded white opal acrylic. Top shade: Die cast aluminum. Enclosure: Injection molded clear polycarbonate. Frame: Die cast aluminum. Base plate: Die cast aluminum. Post: Extruded aluminum.Weight: Max. 41 lbs. including footplate and pole.
30
21.9”
17.3”
8.4”
10.8
”
11.5
”
30
kipp wall ledLast year Kipp Wall and bollard celebrated their 10th anniversary. Since the be-
ginning, the Kipp family has proven its uniqueness. Effi ciency is part of the de-
sign, and the LED-versions are no exceptions. The matte opal diffuser ensures a
non glaring light distribution. The design optimises the use of the light source
whether it is a conventional light source or LEDs. Focusing on each detail the
Alfred Homann way ensures both effi ciency and
product quality. The comfort is unique and
the adaptability to all kinds of architecture and
surroundings is a trade mark of Alfred Homann. The
light distribution is symmetrical downwards. The rela-
tionship between the curved design of the top shade and
the calculated distance to the LED ensures a uniform and wide
distribution of light.
Design: Alfred Homann
factsFinish: Natural painted aluminum or black, powder coated.Light source: 37W LED, 4000K.Material: Diffuser: Injection molded white opal acrylic. Top shade: Die cast aluminum. Enclosure: Injection molded clear polycarbonate. Frame: Die cast aluminum. Mounting plate: Die cast aluminum. Arm: Extruded aluminum.Weight: Max. 17 lbs.
31
when simplicity meets elegance
Rancho Mirage Medical Center,
Rancho Mirage, CA, USA
Architect: Burghard Design Group
Photo: Domin Photography
32
Chan
nel I
slan
ds H
arbo
r, O
xnar
d, C
A, U
SA. A
rchi
tect
: Bry
ant
Palm
er S
oto,
Inc.
Pho
to: D
omin
Pho
togr
aphy
becomes a natural part of the project
ah nyhavn area light led
custom design product
33
21.7
”
30.0”
Design: Alfred Homann
factsFinish: White or natural painted aluminum, powder coated.Light source: 63W LED, 3000K or 4000K.Material: Shade: Spun aluminum. Enclosure: Injec-tion molded opal polycarbonate. Rings: Die cast aluminum. Top: Die cast aluminum. Weight: Max. 28 lbs.
The Nyhavn family was established as a custom-design project. Tasked with making a
new wall fi xture for the renovation of the old yards behind Nyhavn, Alfred Homann and
a colleague designed the Nyhavn Wall ”to build a bridge between old architecture and
modern lighting”. The LED version maintains the characteristic light of the Nyhavn family.
All the fi xtures in the family cast direct downlight on the pavement, and the light emitted
fades out evenly around the fi xture. The characteristic rings at the top of the fi xture serves
two purposes. One is to retain the fi xture’s idiom when it is active; achieved because the
gentle light emitted from the shade makes the fi xture appear similar in both daylight and
darkness. The other aim is to allow the light emitted from the top to serve as a guiding
light when the post is placed along streets and paths.
35.1
”
10.5
”
12.6”
10.2”
34
Waterfront meets all architectural challenges. It broadens the meaning of
adaptability. Fitting into the surroundings with an aesthetically
silent appearance makes Waterfront a lighting statement.
The robust design leaves no doubt about how the light
distribution appears, and the simple idiom has a
unique adaptability to all kinds of architecture,
new as well as old. Waterfront is character-
ised by its diffused light distribution. The light
emitted is glare-free and distributed down-
wards to create a symmetrical pattern on the
ground. The rugged construction makes it
suitable for use in public areas.
Design: Dan Borgen Hasløv
a champion of durable design and lighting
factsFinish: Natural painted aluminum or graphite grey, powder coated.Light source: 37W LED, 4000K. Material: Enclosure: Injection molded clear polycar-bonate. Housing: Die cast aluminum. Top: Die cast aluminum. Post: Extruded aluminum. Base plate: Die cast aluminum. Weight: Max. 35 lbs.
35
waterfront led
Aventura Community Recreation Center, Aventura, FL, USA. Specifi er: City of Aventura. Photo: Terry Renna
36
a bollard in disguise
Louis Poulsen Factory, Vejen, Denmark. Photo: Kaslov Studio
3737
430
200 200
380400
16.9
”
7.8”7.8”
15.7” 15.0”
pagoda led
Shortly described as comfort meeting function, and function that
melts into the ambience. Pagoda was born as an add-on to inground
fi xtures, but the new LED version is designed as an onground fi xture.
Four bolts and a mains supply is all you need. The multi-function-
ality of the Pagoda, both a street-chair and a “bollard”, makes this
product quite unique. The light distribution is a low area lighting
that underlines and creates a very special atmosphere at squares,
plazas, streets, etc. The simplicity of the design and the casting in
one process makes the Pagoda extremely vandal resistant. The form
protects the light source from direct vandalism.
Design: design-people
factsFinish: Graphite grey, powder coated.Light source: 4W LED, 3000K.Materials: Frame: Die cast aluminum. Weight: Max. 44 lbs.
38
Ø 21.7”
Ø 9.7”
Max
. 157
.5”
2.0”
1.4”
factsFinish: Matte opal glass.Light source: 40W LED, 3000K.Material: Shade: Die cast aluminum. Refl ector: Spun aluminum. Diffuser: Matte white opal glass.Weight: Max. 12 lbs.
Simplicity is the formula for this circular fi xture. The light source determines its
shape; its function and the materials. The shape signals the illumination, and
the illumination reinforces the shape. But don’t get fooled by the simplicity.
Behind the glare-free light lies a unique way of distributing the light from the
extremely glary LEDs. Foster + Partners launched a vision for the new light
source in the Louis Poulsen lighting universe. The color temperature is 3000°K
and the light source consists of 30 LEDs. Because of the high demands Louis
Poulsen places on the quality of light, it has been of utter importance to use
only the best controlled LED’s regarding color temperature. The canopy hides
a unique system for adjusting the balance of the fi xture quick and easy. The
glass diffuser gives the product a light and exclusive appearance which gives
the room a surprising and extraordinary atmosphere.
Design: Foster + Partners
39
a 360° light experienceArchitectural offi ce on a house boat, Copenhagen, Denmark. Photo: Anders Sune Berg
f+P 550 led
40
free-fl oating light
Margot and Bill Winspear Opera House in Dallas, TX, USA
Architects: Foster + Partners
Lighting Design: Claude Engle
Photo: Nigel Young_Foster + Partners
41
37.2
”
56”
custom design product
f+p 1500 ledDesign: Foster + Partners
Custom designed version of the f+p 550 multiplied by 2.8. The
f+p 1500 is specially designed for the Winspear Opera House
in Dallas, Texas. The material differs naturally from
the smaller version, especially the glass
which is changed into polycarbonate.
The luminaires are placed in the pub-
lic area and the appearance is silent
and beautiful and, though big, they fi t
harmoniously into the surroundings. The
light becomes a part of the room.
factsFinish: Clear acrylic with frosted fi nish on top.Light source: 75W LED, 2700K dimming 1-10V.Material: Shade: Die cast aluminum. Refl ector: Spun aluminum. Diffuser: Clear acrylic.Weight: Max. 112 lbs.
conside
Reservations are made to print and changes occaisioned by technical development or offi cial regulations
Before making a decision on which lighting fi xture to use, consider these
parameters.
Functional aspects such as fl ux levels, effi ciency demands, lumen per watt,
lumen depreciation, distance between poles/fi xtures, mounting heights,
cutoff vs. non-cutoff, durability and safety.
Comfort details which include light pollution, light source CRI, degree of glare,
ease of maintenance, color rendering, security and well being.
Ambience effects such as uniformity, sustainability, light temperature
(warm, neutral or cold), position of the light source, adaptability and aesthetics.
During the development of each of our products, we carefully consider these pa-
rameters which are the three components of the Louis Poulsen philosophy. We
stand behind each fi xture, proud in knowing that we have designed the best fi x-
ture possible. When deciding on which product to use for your lighting project,
consider your priorities carefully and always keep in mind...Light is for people!
rations
Targetti Poulsen USA Inc. 3260 Meridian Parkway Fort Lauderdale, FL 33331 Tel: 954-349-2525Fax: 954-349-2550www.louispoulsen.com