Post on 13-Apr-2017
PERSONAL DETAILS
Surname : NaickerFirst Name/s : KrubeshenDate of Birth : 17 May 1971I.D. Number : 710517 5093 087Gender : MaleMarital Status : MarriedNationality : South AfricanDependent’s : ThreeHome Language : EnglishOther Languages : Afrikaans Health : ExcellentHome Address : 62 Asteria Road Larnaco Etstae Old Main Road Illovo Beach Durban South South Africa
Hobbies : Volleyball, Fishing, Stainless Balustrades.
Criminal Offences : NoneContact Numbers : +27 82 9799 777 Email Address : kruben.naicker@gmail.com
TERTIARY QUALIFICATIONS
Name of Institution : South African Institute of WeldingQualification : Welding and Fabrication Inspectors – Level 1
Senior Welding Inspector – Level 2 Competent Persons Pressure Vessels (Course Passed)
Busy Obtaining Vessel Inspections for CP Number
Name of Institution : CSWIPQualification : International Senior Welding Inspector 3.2 With RT Interpretation
Name of Institution : SasolQualification : 16.2 Appointed
Boilers Course, Emergency Procedure Courses, Forklift Trained, Risk Assessment Evaluation Course & Afrox Safety Training Course.
Name of Institution : Petro SAQualification : (AUT) Automatic Ultrasonic Testing Data Interpretation (Course Attended In Netherlands, Rotterdam).
Off –Shore Survival Course (Requires Renewal)
Curriculum Vitae of
Krubeshen Naicker
EMPLOYMENT HISTORY
Company : Sasol II Secunda Shut DownPosition : Representing Sasol as Welding Services Area ManagerDuration : August 2016 to September 2016 ( Project Complete) Projects : Area Manager for the following areas Unit 001,003,009,010, 010V & 012 Managed all Sasol Welding Specialists Daily Activities, NDT Subcontractors and Subcontracting Inspectors Attended all Senior meetings regarding the Shut Down Progress on a Daily bases to provide Feedback and support.
Company : TFM (DRC) Democratic Republic Of CongoPosition : Client QA/QC Supervisor Duration : July 2015 to February 2016 ( Project Complete) Projects : AP 2 Project over seeing off all subcontractors working on site with regards to all new fabricated Vessels, Tanks, Heat Exchangers and Piping, Managing all Quality Related Activities on Site
Company : Elgin Engineering Position : QA / QC ManagerDuration : November 2013 to July 2015 Projects : New and Repair Fabrications of Heat Exchangers, Pressure Vessels, Tanks and Structural Steel Works For the following Companies = Eskom Power Stations, Sasol, Engen, Sapref, Petro SA, Shell Refineries (Oil & Gas)Duties and Responsibilities : Administrative Responsibilities
Responsible for profit and loss Responsible for execution excellence Responsible to coordinate and supervise NDT Manage all service providers Attend project Management meetings Liaise with Clients, suppliers and contractors on Quality
matters Interface with team members and Client representatives Time Management Develop QC Packs in accordance with code and client
specification requirements and manage right up to Clinet handover
Place holds on any defective work until corrected or concession granted
Issue NCR”s for all deviations from company, code or Client specifications
Attend meetings internal and external Collect Statutory and other certification
Ensure all job related documentation are signed on and off at the appropriate stages
Record all work packs and ensure QCP”s are signed linked to these packages with unique sequence and numbers
Perform Audits and maintain Audit reports Ensure receiving inspection documentation is controlled Develop and maintain systems related to Quality ( Files for
material certificates, consumable certificates, Welders Qualifications, Welder Updates, NCR”s, Concessions etc)
Report trends related to poor Quality Ensure all drawings are traceable as per internal
requirements Report on outstanding Supplier / Contractors performance
related to Quality Coordinate QC activities Review Supplier / Contractors documentation and Data
Books for acceptability Manage all QC Inspectors and QC Clerks Eliminate all client concerns and attend to all client NCR”s
issued and implement corrective actions Draw up Quality Control Plans for pressure piping,
Mechanical equipment Tanks etc Review and approve all Subcontractor’s QCP”s &
Procedures Technical Responsibilities Familiarize with Departmental and Company Procedures,
plant processes, project requirements and standards Study order packages and discuss with suppliers to ensure
agreements on inspection requirements Perform inspections at control points specific to supplier
approved Quality Control Plans to verify product conformance to client specifications and manufacturing codes
Report objectively and accurately on inspection findings Provide technical input into failure investigations and
product Audits
Company : Group Five (Oil and Gas) Position : QA/QC ManagerDuration : November 2011 to November 2013Project : Transnet/NMPP Terminals Project TM1 Estimated R 1 Billion Rand Project
Duties and Responsibilities : Responsible for execution excellence Responsible to coordinate and supervise NDT Manage all service providers Attend project Management meetings Liaise with Clients, suppliers and contractors on Quality
matters
Interface with team members and Client representatives Time Management Develop QC Packs in accordance with code and client
specification requirements and manage right up to Clinet handover
Place holds on any defective work until corrected or concession granted
Issue NCR”s for all deviations from company, code or Client specifications
Attend meetings internal and external Collect Statutory and other certification Ensure all job related documentation are signed on and off
at the appropriate stages Record all work packs and ensure QCP”s are signed linked
to these packages with unique sequence and numbers Perform Audits and maintain Audit reports Ensure receiving inspection documentation is controlled Develop and maintain systems related to Quality ( Files for
material certificates, consumable certificates, Welders Qualifications, Welder Updates, NCR”s, Concessions etc)
Report trends related to poor Quality Ensure all drawings are traceable as per internal
requirements Report on outstanding Supplier / Contractors performance
related to Quality Coordinate QC activities Review Supplier / Contractors documentation and Data
Books for acceptability Manage all QC Inspectors and QC Clerks Eliminate all client concerns and attend to all client NCR”s
issued and implement corrective actions Draw up Quality Control Plans for pressure piping,
Mechanical equipment Tanks etc Review and approve all Subcontractor’s QCP”s &
Procedures Technical Responsibilities Familiarize with Departmental and Company Procedures,
plant processes, project requirements and standards Study order packages and discuss with suppliers to ensure
agreements on inspection requirements Perform inspections at control points specific to supplier
approved Quality Control Plans to verify product conformance to client specifications and manufacturing codes
Report objectively and accurately on inspection findings Provide technical input into failure investigations and
product Audits
Company : Group Five (Oil and Gas) Position : QA/QC Manager
Duration : July 2010 to November 2011Project : Transnet/NMPP Pump Stations Project PS1 , PS3 & PS5 Estimated R 2.5 Billion Rand Project
Duties and Responsibilities : Attend all technical review meetings to ensure all welding
aspects are covered in the meetings Ensure correct selection of parent materials as per approved
specifications and welded joint propertiesEnsure correct Quality and acceptance of welds as per code
requirementsProviding solutions to all queries with the customer’s approval
by means of raising: Technical Queries, Concessions & Requests For Information via the clients Aconex system.
Attend all Management meetings Ensure all welders are certified to required codes for the
project ASME IX & API 1104 Provide information on location requirements , accessibility Problem solving of material requirements as per B31.4 Coordinate all subcontractors(NDT, Painting, C/S Tanks,
S/S Tanks, Denso, Supports, Material Suppliers etc) Co-ordinate all QC personal Manage 3 x Sites PS1(Amanzimtoti), PS3
(Pietermaritzburg) PS5 (Ladysmith) & Workshop regarding all QA/QC requirements
Review subcontractor documentation & obtain approvals from
Clients Via the clients Aconex system Perform Audits as per the Group Five audit schdule Raise NCR’s were & when required Testing of welders to ASME IX & API 1104 and draw up all
welders certificates Ensure all PQR”S &WPS”s is qualified and meets the
customer’s (NMPP) requirements. Draw up all Quality control plans and obtain client approval etc
Company : Group 5 (Oil And Gas)Position : QA/QC ManagerDuration : November 2008 to JulyProject : Sapref Refinery / Engen RefineryDuties and Responsibilities :
Attend all Management Meetings Review all Radio Graphic Films To Assess Welder
Performance And Obtain Approvals from AIA, Review all Radio Graphs on fabricated and repaired welds and obtain approvals from AIA
Draw up Inspection Test Plans And Quality Control Plans for Vessels, Tankage & Piping And Obtain approvals from clients(Engen/Sapref)
Perform Scheduled Audits In Regard To The Company Quality Management Systems And ISO 9001-2008
Perform Audits On Subcontractors(NDT,PWHT,Welding Contractors)
Review All NDT & PWHT Procedures And Verify Required Approvals
Draw Up Method Statements For Repairs To Vessels And Tanks
Coordinate All NDT & PWHT Related Functions And Personnel
Monthly Tracking Of Welding Performance, Reject Rates. Draw Up And Control Tracking Sheets For Shut Downs
And Maintenance Work Responsible For All QC Inspectors,QC Clarks & Document
Controllers Liaise With AIA And Unit Area Engineer’s Control And Monitor All Registers
NCR,Welders,Calerbrations,WPS & PQR,Materials ETC Plan and Prep for Shut Downs Phase, Pre Fab Phase &
Execution Phase. Etc
Company : SAPREF –Shell (Moody International SA)Position : Plant Integrity InspectorDuration : June 2008 to November 2008 Project : MaintenanceDuties and Responsibilities : Performing of periodic inspections on all Equipment=Vessels, Tanks Piping, Air Heaters, Tube Bundles etc Data capturing inspection reports as per SAPREF data base. Attending all meetings at lube oil plant.
Company : Shell- Moody International SAPosition : Plant Integrity Piping Inspector Duration : June 2007 to June 2008Project : RBI-Risk Base Inspection/CUI-Corrosion under Insulation InspectionsDuties and Responsibilities : Reporting On Pipelines, Pressure Vessels, Heat Exchangers etc
Evaluating Extent of Risks of DefectsReport Writing (As Per Sapref Systems) and API 570 Codes
Company : Abet Inspection Petro-SA (Mossel Bay)Position : Statutory InspectorDuration : May 2007 to June 2007Project : TurnaroundsDuties and Responsibilities : Perform Statutory Inspections on Reactors & Hoppers Report Writing On All Defects Found
Reporting To Plant Mechanical Engineer Writing Out Recommendations for Repairs Performing Inspections as Per QCP
Company : Goss & Balfe Alfes Urainium Plant (Klerksdorp)Position : QC Manager
Duration : January 2007 to May 2007Project : Alfes Uranium MineDuties and Responsibilities : Recruiting Of QC Inspectors (As Per Job Requirements)
Checking On QC SupervisorsAllocating Work to QC InspectorsAchieving Company GoalsLiaising With 3rd Party InspectorsObtaining Concessions Where Not Practical For Pressure TestsSigning Off Complete Work Problem SolvingEtc
Company : Abet Inspection / Petro SA (Mossel Bay)Position : Senior QA / QC InspectorDuration : 2005 to 2006Projects : ExtensionDuties and Responsibilities : Writing Of Quality Control Plans
Performing of InspectionsSigning Of Pipe Repairs and Work Packs as Per QCP
Company : Unit Inspection (Sasol Secunda)Position : QA / QC & Materials InspectorDuration : 2004 to 2005Project : Sasol Boilers 2&3 GO TeamDuties and Responsibilities : Reporting To Sasol Group leader
Checking That Materials Comply With CodesStock Control of MaterialsRequesting Of (PMI) Positive Material IdentificationsStorage and Packing of Materials as Per ASME CodesReceiving and Dispatching Off MaterialsObtaining Of Material Certs and FillingLeasing With SuppliersControlling Of Required Manpower
Company : Hydra Arc Engineering & Fabrication CO (Sasol Secunda)Position : (1) Senior Supervisor (16.2 Appointed)Position : (2) SupervisorPosition : (3) Welder Duration : 1992 to 2004Project : Sasol BoilersDuties and Responsibilities : Liaising With Mechanical Engineer & Group Leaders
Attending All MeetingsRecruiting Of Personal as Per Requirements
Handing Out Work to SupervisorsAchieving Company Dead Lines
Company : Steinmuller Eskom Tutuka Powerplant (Standerton)Position : Apprentice Welder and Coded WelderDuration : 1988 to 1992Experience : Part of the Steinmuller GO Team and worked on the following Power Stations
Tutuka Power Station Kreil Power Station
Matla Power Station Hendrina Power Station Duvha Power Station
I also worked at the Steinmuller work shop that was based in Chamdor building the Boiler walls, burner rings, Sling Tubes, Economizers etc
ADDITIONAL EXPERIENCE
Experienced in various computer programs
Experienced in Boilermaking
Experienced in pipe fitting
Was elected Chairman of the Equity Committee in Sasol for Hydra Arc
Received the Apprentice off the year award for Steinmuller for Welding
Experienced with most codes of construction & repairs
REFERENCES
Company : Sasol SecudaContact Person : Charl DorflingTel No : 0836803234
Company : Elgin Engineering Contact Person : Vincent Chetty (Managing Director)Tel No : Work 031-2740006
Company : G5 Oil & GasContact Person : Gianni Ioppo (Project Manager NMPP/Transnet Project) Tel No : Private +27 (0)829080062 / Work 0767929175 Company : Group Five Oil & GasContact Person : Pravin Laljit (Quality Manager) Tel No : +27 (0) 78 460 3391
Company : SAPREF Contact Person : Jay Padayachee (Quality Manager)Tel No : 031-4801614Cell : 082 8060 311
Company : Moody International SAContact Person : Keith Whitby (Supervisor)Cell No : 083 6149 155
Company : Stainmuller Construction Contact Person : Henry Macrate (Welding Superintendent) Cell No : 082 0638 137
Company : Hydra Arc Engineering and Fabrication (Sasol)Contact Person : Johan Trollip (Sasol Group Leader)Cell No : 082 8000 441
Company : Unit Inspection (Sasol) Contact Person : Johan Trollip (Sasol Group Leader)Cell No : 084 5868 804
Company : Abet Inspection Contact Person : Bill Alexzandera (Director)Office No : 044 8735 437
Company : Goss & Balfe Contact Person : Steven Kurns (QA/QC Manager)Cell No : 082 7777 930
Please note all other certificates to be submitted on request, CSWIP Certificate also up dated and valid